new products - taw all accesstawallaccess.com/wp-content/uploads/2014/11/sema-tmg-q4-book-2.pdfnew...
TRANSCRIPT
Q4NEW PRODUCTS
www.Smittybilt.com / www.ProCompUSA.com / www.RubiconExpress.com / www.G2Axle.com / www.LRGrims.com
2014
36 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
Gen2 Winches / X20 - WINCHES
Remote Plug Cover
Larger clutch for control during gloved operations
UV-resistant matte black textured finish
Inductive braking system reduces heat for long lasting performance
Oversized tie rod struts for maximum strength
Rope Sleeve (COMP Series)
Forged Hook
Competition Aluminum Fairlead (COMP Series)
Steel or synthetic rope geared for fast line speed
Powerful amphibious 6.6 HP motor – highest torque in the industry
Integrated Wireless Remote Control (X20)
Rear Wire Isloator(not pictured)
X20 GEN2 WIRELESS WATERPROOF WINCHThe new generation of Smittybilt X2O winches have been enhanced in almost every area for increased performance and trouble free operation. Each X2O winch features a series wound amphibious 6.6 HP motor which is completely sealed, as well as a 3 stage planetary gear system. They have a completely waterproof, state-of-the-art 500AMP solenoid that has the versatility to be mounted in two different locations depending on your application needs. They also include a new controller that can be wired directly to the winch or unplugged for trouble free wireless operation.
If you're looking for something more versatile, check out the X2O COMP series, complete with all the features and benefits of the original series, except equipped with a synthetic rope.
The performance of the new X2O series cannot be beat. With gear ratios delivering lightning fast speed, coupled with Smittybilt's lifetime warranty, you can count on the X2O winch to be there every time, in every situation.
Ambient Temp.
Initial of Drum
Work Cycle
Final Temp.
Rise in Drum Temp.
X20 GEN2 WINCH 86°F 86°F 10 min 90°F + 4°FCompetitor 86°F 86°F 10 min 158°F + 72°F
EXCLUSIVE FEATURE OF THE X20 SERIES:DYNAMIC INDUCTIVE BRAKING SYSTEM • Synthetic rope approved• 66% less heat generated than traditional dynamic brake drums
Multiple mounting options on the control pack
Pictured: #98512
37SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
THE COMP SERIES DIFFERENCE
4 Way Roller Fairlead Steel Cable
WaterproofWireless Remote w/Wired Option
X2O WINCH FEATURES
COMPETITION ALUMINUM FAIRLEAD
• High-grade billet aluminum material• Reduces binding and friction caused by
angled pulls and protects your synthetic rope from excessive wear
• Will not fray or tangle synthetic rope• Standard bolt pattern
SYNTHETIC WINCH ROPE - 94 ft.
• 1/7th the weight of steel cable• Minimal stretch, non-rotational,
no kinks, curls or wire splinters• UV and abrasion resistant • Specially coated to prevent slippage • Protective sleeve prevents overheating
X20 10,000LBS
DESCRIPTION PART#
X20 10,000 LBS WINCH SYSTEM 97510
X2O 10,000 LBS WINCH COMP 98510
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs No Load 2000 4000 6000 8000 10000kg No Load 907 1814 2721 3628 4545
Line Speedft/min 31.1 14.3 11.7 10.17 8.8 7.38m/min 9.5 4.3 3.5 3.2 2.7 2.25
Motor Amps 76 150 220 270 320 380
10,000LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4Rated line pull lbs 10000 9100 8570 7950Per layer kg 4545 3915 3499 3215Cumulative cable ft 19.6 44.2 73.8 98.4Capacity m 6 13 22 30
Waterproof: IP68 ratingRated Line Pull: 10000Lbs (4535kgs) single-lineMotor: 6.6Hp series woundControl: Remote switch, 12' (3.7M) leadGear Train: 3-Stage PlanetaryGear Ratio: 218:1Clutch: Sliding ring gearBrake: Automatic out-of-drumDrum Size: Diameter 2.5" (63.5mm) Length: 10.0" (254mm)Fairlead: 4-way roller (COMP series: aluminum fairlead)Remote Control: Included. Wireless or wired optionsRec. Battery: 650CCA minimum for winchingBattery Leads: 25mm2, 72"(1.83m)1Finish: Textured blackWeight: 99.0Lbs (45.0Kgs)Mounting Bolt Pattern: 10.0" x 4.50"Overall Dimensions (L x W x H) 22.3" x 5.4" x 9.4"Cable: 98.5' 3/8" Diameter
10,000 LB. WIRELESS WINCH
97510
98510
Gen2 Winches / X20 - WINCHES
IN STOCKNOW
38 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs No Load 3000 6000 9000 12000kg No Load 1363 2727 4090 5454
Line Speedft/min 24.60 11.48 8.86 7.22 5.58 m/min 7.5 3.5 2.7 2.2 1.7
Motor Amps 70 138 218 260 330
12,000LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4Rated line pull lbs 12000 9530 7929 6770Per layer kg 5455 4332 3604 3077 Cumulative cable ft 18 37 64 98 Capacity m 5.4 11.4 19.4 30
THE COMP SERIES DIFFERENCE
4 Way Roller Fairlead Steel Cable
WaterproofWireless Remote w/Wired Option
X2O WINCH FEATURES
COMPETITION ALUMINUM FAIRLEAD
• High-grade billet aluminum material• Reduces binding and friction caused by
angled pulls and protects your synthetic rope from excessive wear
• Will not fray or tangle synthetic rope• Standard bolt pattern
SYNTHETIC WINCH ROPE - 94 ft.
• 1/7th the weight of steel cable• Minimal stretch, non-rotational,
no kinks, curls or wire splinters• UV and abrasion resistant • Specially coated to prevent slippage • Protective sleeve prevents overheating
X20 12,000LBS
DESCRIPTION PART#
X20 12,000 LBS WINCH SYSTEM 97512
X2O 12,000 LBS WINCH COMP 98512Waterproof: IP68 RatingRated Line Pull: 12,000Lbs (5,454kgs) single-lineMotor: 6.6hp Series WoundControl: Remote Switch, 12' (3.7m) leadGear Train: 3-Stage PlanetaryGear Ratio: 265:1Clutch: Sliding Ring GearBrake: Automatic Out-Of-DrumDrum Size: Diameter 2.5" Length: 10.0" (254mm)Fairlead: 4-way roller (COMP series: aluminum fairlead)Remote Control: Included. Wireless or wired optionsRec. Battery: 650CCA Minimum for WinchingBattery Leads: 25mm2, 72"(1.83m)1Finish: Textured BlackWeight: 99.0Lbs (45.0Kgs)Mounting Bolt Pattern: 10.0" x 4.50"Overall Dimensions L x W x H) 22.3" x 5.4" x 9.4"Cable: 98.5' 3/8" Diameter
12,000 LB. WIRELESS WINCH
97512
98512
Gen2 Winches / X20 - WINCHES
IN STOCKNOW
39SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs No Load 4000 7500 11250 15500
kg No Load 1814 3409 5113 7045
Line Speedft/min 23.62 10.50 8.20 5.25 3.94
m/min 7.2 3.2 2.5 1.6 1.2
Motor Amps 71 152 239 332 422
15,500LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4
Rated line pull lbs 15500 12060 10082 8662
Per layer kg 7045 5482 4583 3937
Cumulative cable ft 19.68 45.92 75.44 85.28
Capacity m 6 14 23 26
X20 15,500LBS
DESCRIPTION PART#
X20 15,500 LBS WINCH SYSTEM 97515
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs No Load 6000 10000 12000 14000 17500
kg No Load 2721 4536 5454 6363 7937
Line Speedft/min 23.62 9.18 5.90 4.92 4.26 2.95
m/min 7.2 2.8 1.8 1.5 1.3 0.9
Motor Amps 71 200 300 350 395 450
17,500LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4
Rated line pull lbs 17500 15225 13246 11524
Per layer kg 7955 6920 6021 5238
Cumulative cable ft 19.68 45.92 75.44 85.28
Capacity m 6 14 23 26
X20 17,500LBS
DESCRIPTION PART#
X20 17,500 LBS WINCH SYSTEM 97517
Waterproof: IP68 Rating
Rated Line Pull: 15,500Lbs (7,045kgs) single-line
Motor: 6.6hp Series Wound
Control: Remote Switch, 12' (3.7m) lead
Gear Train: 3-Stage Planetary
Gear Ratio: 430:1
Clutch: Sliding Ring Gear
Brake: Automatic Out-Of-Drum
Drum Size: Diameter 3.45"(88.0mm)
Length: 10.0" (254mm)
Fairlead: 4-Way Roller
Remote Control: Included
Rec. Battery: 650CCA Minimum for Winching
Battery Leads: 25mm2, 72"(1.83m)1
Finish: Textured Black
Weight: 150.0Lbs (68.0Kgs)
Mounting Bolt Pattern: 10.0" x 4.50"
Overall Dimensions L x W x H) 22.3" x 7.5" x10.7"
Cable: 98.5' 7/16" Diameter
Waterproof: IP68 Rating
Rated Line Pull: 17,500Lbs (7,954kgs) single-line
Motor: 6.6hp Series Wound
Control: Remote Switch, 12' (3.7m) lead
Gear Train: 3-Stage Planetary
Gear Ratio: 430:1
Clutch: Sliding Ring Gear
Brake: Automatic Out-Of-Drum
Drum Size: Diameter 3.45"(88.0mm)
Length: 10.0" (254mm)
Fairlead: 4-Way Roller
Remote Control: Included
Rec. Battery: 650CCA Minimum for Winching
Battery Leads: 25mm2, 72"(1.83m)1
Finish: Textured Black
Weight: 150.0Lbs (68.0Kgs)
Mounting Bolt Pattern: 10.0" x 4.50"
Overall Dimensions (L x W x H) 22.3" x 7.5" x10.7"
Cable: 98.5' 7/16" Diameter
15,500 LB. WIRELESS WINCH 17,500 LB. WIRELESS WINCH
97515 97517
Gen2 Winches / X20 - WINCHES
IN STOCKNOW
40 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
The new series of Smittybilt XRC winches have been thoroughly updated with heavy-duty features for enhanced performance and durability. Ranging from 9,500lb – 17,500lb, Smittybilt's XRC winches can handle any situation you get into. The new 6.6HP motor is connected to a 3 stage planetary gear system with revised gear ratios for increased pulling power and line speed. Every winch is finished in a rugged UV resistant matte black coating with stainless steel hardware and oversized aluminum cross bars to provide you with a great looking system that will last you a lifetime. Every system includes a heavy-duty remote control. The redesigned solenoid box can mounted in three locations on the winch for maximum versatility. Each winch also includes a four way roller fairlead and a forged hook. If you're after a winch equipped with a state-of-the-art synthetic rope, look to the XRC COMP Series for the ultimate in pulling power and performance. A Smittybilt XRC winch is a complete recovery system with the muscle and reliability to bail you out of any situation.
XRC GEN2 WATERPROOF WINCH
Over sized tie rod struts for maximum strength
UV-resistant matte black textured finish
Powerful amphibious 6.6 HP motor – the highest torque in the industry
Multiple mounting options on the control pack.Brackets included.
Revolutionary 3-stage Planetary Gear system for ultimate strength and quiet operation
Wired Remote with Magnetic Mount
Remote Plug Cover
Larger clutch for control during gloved operations
Multiple mounting options on the control pack
Forged Hook4-Way Roller Fairlead
Pictured: #97495
Gen2 Winches / XRC - WINCHES
41SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
THE COMP SERIES DIFFERENCE
4 Way Roller Fairlead
WaterproofMagnetic Mount
XRC WINCH FEATURES
Steel Cable
COMPETITION ALUMINUM FAIRLEAD
• High-grade billet aluminum material• Reduces binding and friction caused by
angled pulls and protects your synthetic rope from excessive wear
• Will not fray or tangle synthetic rope• Standard bolt pattern
SYNTHETIC WINCH ROPE - 94 ft.
• 1/7th the weight of steel cable• Minimal stretch, non-rotational,
no kinks, curls or wire splinters• UV and abrasion resistant • Specially coated to prevent slippage • Protective sleeve prevents overheating
9,500 LB. WINCH XRC 9,500LBS
DESCRIPTION PART#
XRC 9,500 LBS WINCH SYSTEM 97495
XRC 9,500 LBS WINCH COMP 98495
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs 0 2000 4000 6000 8000 9500kg 0 910 1814 2720 3625 4305
Line Speedft/min 32.34 19.68 14.76 10.82 9.35 6.23m/min 9.86 6 4.5 3.3 2.85 1.9
Motor Amps 80 165 240 320 380 435
9,500LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4Rated line pull lbs 9500 8435 7640 7086Per layer kg 4305 3822 3460 3212Cumulative cable ft 16 42 72 94Capacity m 5 12 21 28
Waterproof: IP67 RatingRated Line Pull: 9,500Lbs (4,309kgs) single-lineMotor: 6.6hp Series WoundControl: Remote Switch, 12' (3.7m) leadGear Train: 3-Stage PlanetaryGear Ratio: 161.28 : 1Clutch: Sliding Ring GearBrake: Automatic In-DrumDrum Size: Diameter 2.5" Length: 10.0" (254mm)Fairlead: 4-Way RollerRemote Control: IncludedRec. Battery: 650CCA Minimum for WinchingBattery Leads: 22mm 2, 72"(1.83m)1Finish: Textured BlackWeight: 78.0 lbs (35.0 k)Mounting Bolt Pattern: 10.0 " x 4.5 "Overall Dimensions (L x W x H) 20.8" x 6.3" x 7.8"Cable: 94' 5/16" Diameter
97495
98495
Gen2 Winches / XRC - WINCHES
IN STOCKNOW
42 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
12,000 LB. WINCH
THE COMP SERIES DIFFERENCE
4 Way Roller Fairlead
Waterproof
XRC WINCH FEATURES
COMPETITION ALUMINUM FAIRLEAD
• High-grade billet aluminum material• Reduces binding and friction caused by
angled pulls and protects your synthetic rope from excessive wear
• Will not fray or tangle synthetic rope• Standard bolt pattern
SYNTHETIC WINCH ROPE - 94 ft.
• 1/7th the weight of steel cable• Minimal stretch, non-rotational,
no kinks, curls or wire splinters• UV and abrasion resistant • Specially coated to prevent slippage • Protective sleeve prevents overheating
XRC 12,000LBS
DESCRIPTION PART#
XRC 12,000 LBS WINCH SYSTEM 97412
XRC 12,000 LBS WINCH COMP 98412
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs 0 3000 6000 9000 12000kg 0 907 1814 2722 3629
Line Speedft/min 28.208 11.152 7.872 6.232 5.248m/min 8.6 3.4 2.4 1.9 1.6
Motor Amps 65 163 244 315 400
12,000LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4Rated line pull lbs 12000 10700 9575 8800Per layer kg 5665 4850 4340 3790Cumulative cable ft 16 42 72 80Capacity m 5 12 21 24
Waterproof: IP67 RatingRated Line Pull: 12,000Lbs (5,454kgs) single-lineMotor: 6.6hp Series WoundControl: Remote Switch, 12' (3.7m) leadGear Train: 3-Stage PlanetaryGear Ratio: 193.2 : 1Clutch: Sliding Ring GearBrake: Automatic In-DrumDrum Size: Diameter 2.5" Length: 10.0" (254mm)Fairlead: 4-way roller (COMP series: aluminum fairlead)Remote Control: IncludedRec. Battery: 650CCA Minimum for WinchingBattery Leads: 22mm 2, 72"(1.83m)1Finish: Textured BlackWeight: 85 Lbs (39 Kgs)Mounting Bolt Pattern: 10.0" x 4.50"Overall Dimensions (L x W x H) 21.23" x 6.3" x 7.8 "Cable: 79' 3/8" Diameter
97412
98412
Magnetic Mount
Steel Cable
Gen2 Winches / XRC - WINCHES
IN STOCKNOW
43SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs 0 3000 6000 9000 12000 15500
kg 0 1360 2722 4080 5440 7024
Line Speedft/min 24.11 11.15 8.7 7.54 5.7 4.3
m/min 7.35 3.4 2.65 2.3 1.74 1.4
Motor Amps 70 165 240 310 375 445
LINE SPEED / AMP DRAW (FIRST LAYER)
Line Pulllbs 0 3000 6000 9000 12000 15000 17500
kg 0 1360 2720 4080 5440 6800 7931
Line Speedft/min 22.632 10.824 7.872 6.232 5.248 3.936 3.2472
m/min 6.9 3.3 2.4 1.9 1.6 1.2 0.99
Motor Amps 75 140 210 270 330 390 435
15,500LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4
Rated line pull lbs 15500 12968 10992 9630
Per layer kg 7024 5877 4982 4364
Cumulative cable ft 20.4 46 75 92
Capacity m 6.2 14 23 28
XRC 15,500LBS
DESCRIPTION PART#
XRC 15,500 LBS WINCH SYSTEM 97415
17,500LBS LINE PULL AND CABLE CAPACITY
Layers of cable 1 2 3 4
Rated line pull lbs 17500 14583 12411 10822
Per layer kg 7931 6609 5625 4905
Cumulative cable ft 19.68 45.92 75.44 93.48
Capacity m 6 14 23 28.5
XRC 17,500LBS
DESCRIPTION PART#
XRC 17,500 LBS WINCH SYSTEM 97417
Waterproof: IP67 Rating
Rated Line Pull: 15,500Lbs (7,045kgs) single-line
Motor: 6.6hp Series Wound
Control: Remote Switch, 12' (3.7m) lead
Gear Train: 4-Stage Planetary
Gear Ratio: 330:1
Clutch: Sliding Ring Gear
Brake: Automatic In-Drum
Drum Size: Diameter 3.45"(88.0mm)
Length: 10.0" (254mm)
Fairlead: 4-Way Roller
Remote Control: Included
Rec. Battery: 650CCA Minimum for Winching
Battery Leads: 22mm 2, 72"(1.83m)1
Finish: Textured Black
Weight: 132 Lbs (60 Kgs)
Mounting Bolt Pattern: 10.0" x 4.50"
Overall Dimensions (L x W x H) 24.1" x 8.4" x 8.86
Cable: 94' 25/64 Diameter
Waterproof: IP67 Rating
Rated Line Pull: 17,500Lbs (7,954kgs) single-line
Motor: 6.6hp Series Wound
Control: Remote Switch, 12' (3.7m) lead
Gear Train: 4-Stage Planetary
Gear Ratio: 330: 1
Clutch: Sliding Ring Gear
Brake: Automatic In-Drum
Drum Size: Diameter 3.45"(88.0mm)
Length: 10.0" (254mm)
Fairlead: 4-Way Roller
Remote Control: Included
Rec. Battery: 650CCA Minimum for Winching
Battery Leads: 22mm 2, 72"(1.83m)1
Finish: Textured Black
Weight: 141 Lbs (62 Kgs)
Mounting Bolt Pattern: 10.0" x 4.50"
Overall Dimensions (L x W x H) 24.8" x 8.4" x 8.86"
Cable: 94' 7/16" Diameter
15,500 LB. WINCH 17,500 LB. WINCH
97515 97517
Gen2 Winches / XRC - WINCHES
IN STOCKNOW
44 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
Overland - TRAIL EQUIPMENT
Sunroof for additional sunlight Easy assembly and packingLED strips
OVERLANDER TENT
Few things are more rewarding than camping in the backcountry with family and friends, and roof top tents are a great way to set up camp in a hurry. These tents have been expensive and difficult to source though, until now. Smittybilt’s latest product is the Overlander Tent, packed full of features at an affordable price.
The Overlander Tent attached to the roof of your vehicle and sets up in just minutes, keeping you safe and secure as you sleep. The 2-inch thick high density foam mattress ensures a good night sleep, and the 91" x 53" size makes it big enough for couples or small families.
The rip stop polyester top is polyurethane impregnated to be completely waterproof, while mesh screens keep the Overlander breathable in any conditions. The tent frame poles and inluced telescoping ladder are made from lightweight and durable anodized aluminum while the hinges are constructed from stainless steel. The Overlander Tent is easy to set up and take down, and when folded away a heavy duty PVC cover keeps the tent completely dry and free from UV rays. Add a Smittybilt Overlander Tent to your vehicle and hit the trails today.
SPECS:
WARRANTY: One Year
OPEN SIZE : 95" W x 56" L x 51" H
CLOSED SIZE : 47" W x 55" L x 11.5" H
PACKING SIZE: 58" x 49" x 13"
G.W.: 132 lbs / 59.8 kgs
N.W. 116.5 lbs / 52.8 kgs
TOP: 600D heavy-duty rip stop polyester waterproof and polyurethane impregnated
BASE: 1" aluminum/ polyurethane sandwich base
MAX. LOAD CAPACITY:
661 lbs / 300 kgs
WATER COLUMN: 1500mm
TENT POLES: Anodized aluminum tent frame poles Stainless steel hinges
RAIN FLY: Lightweight, waterproof 420d oxford flysheet 4mm spring steel durable flysheet poles
MATTRESS: Sleeps 2 adults 60mm high-density foam with removable cover 91" X 53"
LADDER: Telescopic anodized aluminum ladder
Maximum ladder load capacity is 265 lbs / 120 kgsExtends up to 6.5' / 2m (optional ladder extension available)
TRAVEL BAG: Heavy-duty 600gsm, 500d PVC travel cover
Zips for completewaterproofing UV-resistant straps
ALSO INCLUDES: Interior LED strip Mosquito net - CE approved Cigarette lighter adapter Shoe storage bag
TENT ANNEX (not shown)• Attaches to tent with rugged zippers• Adds additional room for privacy• 87" H x 79" W x 70" L
DESCRIPTION PART#
Overlander Tent 2783
Ladder Extension 18" W x 21" H 2785
Tent Annex 2788
NOV2014
45SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
EPS INVERTER GENERATOREmbrace the clean power of Smittybilt’s new E.P.S. inverter Generator. The latest technology has allowed Smittybilt to pack huge power into a small and quiet package. The “Smart Throttle” allows motor to run at varying speeds for maximum fuel efficiency – something conventional generators can not match. The Invertor's "3-phase inversion process" produces clean power allowing direct plug-in of sensitive electronics without worry. Count on Smittybilt to keep the power flowing.
• 2600 Watt max output, 2,300 continuous• Years of service – Inverter have no moving parts• C.A.R.B.-approved 4-stroke, OHV gas engine• Low noise, 56~63 dB, 58 dB at 7M• Dual 120 VAC outlets, Single 12VDC outlet• 6-hour duty cycle at 50% load• Overload protection • 1.5 gal fuel tank
DESCRIPTION PART#
EPS Generator 2786
DESCRIPTION PART#
Arctic Fridge/Freezer 2789
ARCTIC FRIDGE/FREEZER• Digital control panel with recessed panel for streamlined design• Adjustable temperature and power control• AC/DC power connection• 3-stage battery preservation switch• No heat radiation and low power consumption• Large storage capacity with aluminum-lined interior and internal
LED light• Removable storage basket and separate dairy section• Danfoss Compressor• Fast cool capability
TAILGATE TABLEMake camping a breeze with the integrated tailgate table. Built-in cup holders and large surface area keep your food out of the dirt. Excellent place for your BBQ or small repair projects.
DESCRIPTION PART#
Tailgate Table 2793
• Built-in cup holders• Can be mounted with table top up or down • Keeps your food out of the dirt• Fits with factory sub-woofer• Holds up to 40 lbs• Made of 1/8" steel• Heavy duty spring loaded pull pin locks table in
position • Can be mounted inside or out • Drilling required• Low profile when closed - only 1.5" thick.
24.5" W
14" W Dimension
Table Top
Overland - TRAIL EQUIPMENT
NOV2014
FEB2015
JUN2015
46 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
New GEN2 Solid D-Ring and Jack Point
XRC / GEN2 / JK - BUMPERS
GEN2
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
TEXTURED BLACK Dual-Stage Textured Black Powder Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
Tire Carrier Mount
Class III Hitch
L.E.D lights included
Jack Mount
Roto Pax® Gas / Water can mount
XRC FRONT GEN2 MAX BUMPER• New MAX solid D-Ring and jack point mount - welded on the inside and out!• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish• 1.75" 120 wall over rider and kickers• O.E. fog light provision and towable D-ring mounts• Powdercoat finish - 5 year limited warranty• Smittybilt limited lifetime warranty
Light tabsup to 9" diameter
Can accomodated up to 12k winch
Integrated ports designed to accommodate OE Fog lights.
REAR BUMPER• New solid D-ring and jack point mount - welded on the inside and out!• UHMW (ultra-high-molecular-weight polyethylene) to provide the
ultimate protection for rock crawling• Modular design, tire carrier can be added (sold separately)• Fender-to-fender protection• Aggressive design for with raised corners for better entry and exit angles
for the most extreme conditions• Aux back up light cut out provided • 3/16-inch cold rolled steel with two-stage textured matte black finish• Class III hitch for true towing with towable D-ring mounts• Powdercoat finish - 5 year limited warranty• Smittybilt limited lifetime warranty• Anti-rattle provision provided for receiver hitch
XRC - GEN 2 BUMPER (FRONT)
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-Dr 76807
XRC - GEN 2 BUMPER (REAR)
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-Dr 76858
XRC - GEN 2 BOLT-ON TIRE CARRIER
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-Dr 76857
TIRE CARRIER• Bolt-on design for XRC GEN2 bumpers• Frame pivot point for added strength• Tuned one-handed opening operation, tuned to factory tailgate • CB and jack mounts and Roto Pax® gas can holder• Manufactured from 3/16" cold rolled steel• Two-stage textured matte black finish
NOV2014
FEB2015
FEB2015
47SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
SRC GEN2 FRONT BUMPER• New max solid D-ring and jack point mount - welded on the inside and out!• UHMW (Ultra-high-molecular-weight polyethylene) to provide the ultimate protection for Rock crawling• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions• Fender-to-fender protection• 2" 120 Wall over rider and kickers• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch• O.E. fog light provision• 3/16-inch cold rolled steel with towable D-ring mounts• Two-stage textured matte black powdercoat finish with 5-year limited warranty• Smittybilt Advantage limited lifetime warranty
TIRE CARRIER• Bolt on design for SRC GEN2 bumpers• Frame pivot point for added strength• Tuned one handed opening operation, tuned to factory tailgate • CB and Jack mount and Roto Pax® gas can holder• Manufactured from 3/16-inch cold rolled steel• Fits 10th annivesary jeep bumper• Two-stage textured matte black finish• Powder coat finish - 5 year limited warranty• Smittybilt limited lifetime warranty
SRC / GEN2 / JK - BUMPERS
GEN2
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
Jack Mount
Roto Pax® Gas / Water can mount
SRC - GEN 2 BUMPER (FRONT)
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-Dr 76724
SRC - GEN 2 BOLT-ON TIRE CARRIER
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-Dr 76857
TEXTURED BLACK Dual-Stage Textured Black Powder Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
REAR BUMPER• New solid D-ring and jack point mount
- welded on the inside and out!• Aggressive design for with raised corners for better
entry and exit angles for the most extreme conditions• UHMW (ultra-high-molecular-weight polyethylene) to provide
the ultimate protection for rock crawling• Aux back up light cut out provided • 3/16-inch cold rolled steel with two-stage textured matte black finish• Powder coat finish 5 year limited warranty• Smittybilt limited lifetime warranty• Modular design, tire carrier can be added in the future.• Class III hitch for true towing with towable d-ring mounts• Anti-rattle provision provided for receiver hitch
SRC - GEN 2 BUMPER (REAR)
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-Dr 76614
Tire Carrier Mount
Class III Hitch
L.E.D lights included
Light tabs up to 9" diameter
Integrated ports designed to accommodate OE fog lights.
Can accomodated up to 12k winch
FEB2015
MAR2015
FEB2015
New GEN2 Solid D-Ring and Jack Point
48 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
A Center Section
B Mid Width
C Full Width w/ Lights
D Crawler
M.O.D. [Multi Optional Design] JK - BUMPERS
XRC M.O.D. SYSTEM
YEAR MODEL DESCRIPTION PART#
A 07-15 Wrangler (JK) XRC M.O.D. Modular Center Section 76825
B 07-15 Wrangler (JK) XRC M.O.D. Mid Width End Plates 76826
F 07-15 Wrangler (JK) XRC M.O.D. Modular Stinger 76827
C 07-15 Wrangler (JK) XRC M.O.D. Full Width End Plates 76828
E 07-15 Wrangler (JK) XRC M.O.D. Modular Bull Bar 76829
D 07-15 Wrangler (JK) XRC M.O.D. Crawler End Plate 76830
G 07-15 Wrangler (JK) XRC M.O.D. Brush Guard 76831
E Bull Bar
F Stinger
G Brush Guard
M.O.D. [MULTI OPTIONAL DESIGN]• Manufactured from 3/16" cold rolled steel• Solid mount D-rings - welds on the inside and out! • Multi piece options allow you to build your bumper in any configuration for any situation• Built in winch plate to accommodate up to 15k winch • Towable D-ring mounts• Marine grade stainless steel hardware
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
MAR2015
49SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
PIVOT HEAVY DUTY OVERSIZE TIRE CARRIER• Strong monocoque aluminum construction• Eliminates tailgate sag• Maximum tire size – 37”• Increase load carrying capacity to 135lbs• Mounting brackets are made out of Forged
Chrome material – 30% stronger than steel• Adjustable Tire Mount• 3rd Brake light mount included• Protective EPDM gaskets included to protect factory finish• Mounting points for optional brackets to mount trail Jack.• Maintains the easy single action of
opening and closing of the tailgate• No drilling required.• Maintain OE bumpers if preferred• Fits all 2007-2015 JK Wranglers
YEAR MODEL PART#
07-15 Wrangler (JK) 2/4-DR 2843
All Trail Jack Mount 2844
Hardened Hinge Pin
Adjustable Tire Mount
DESCRIPTION PART#
SRC Stingray Vented Hood 76400
• Precision steel construction• Factory Crumble crumple zones retained• Vent hot gases out of engine bay• Thickness of steel: 0.8mm• E-coated, ready for paint• e-coating thickness: 0.2mm• Factory inner core design to accept factory hardware• under insulation mat thickness: 8.7mm• Five year warranty• Smittybilt advantage warranty
Hood Louvers
State-Of-The-Art heat dissipating design
Aerodynamic Design
SRC STINGRAY VENTED HOODFor 07-15 Jeep Wrangler & Wrangler Unlimited JK Smittybilt’s new SRC Stingray vented hood is an exciting new product that will not only will give your JK a more aggressive look, it functions to keep your engine cooler than that of its OE counterpart. Manufactured from 0.8mm steel, combined with a thick underbody insulation mat and ability to accept factory hardware, this hood is precision made and here for the long run. The hood is supplied with a premier black finish e-coat, so it’s ready for paint without any further preparations. Even though it’s built tough, Smittybilt has ensured your safety by retaining the factory crumple zones, and has it covered with their Advantage Warranty.
VENTED HOOD
HOOD/ TIRE CARRIER
MAR2015
FEB2015
50 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
G.E.A.R. CUSTOM FIT SEAT COVERSSmittybilt has released a new and improved range of Jeep seat covers. Utilizing a multi-layered 600 denier ballistic nylon for improved comfort, as well as waterproof functionality. These seat covered are custom made to fit snug to your Jeep seats for a clean and stylish look. To assist with storage solutions, these covers come with MOLLE/PALS webbing and various MOLLE pouches, as well as zippered map pockets both front and rear. For the ultimate seating solution, you can’t go past Smittybilt’s new custom G.E.A.R seat covers.• 600 Denier durable ballistic nylon• Waterproof design• Custom fit for your jeep• MOLLE/pals webbing for custom storage – MOLLE pouches included• Zippered map pockets front and rear• Multi-layered nylon ballistic 600 denier fabric
G.E.A.R. CUSTOM FIT (FRONT)
YEAR MODEL BLACK
13-15 Wrangler (JK) 56647701
07-12 Wrangler (JK) 56647807
03-06 Wrangler (TJ, LJ) 56647501
97-02 Wrangler (TJ) 56647001
G.E.A.R. CUSTOM FIT (REAR)
YEAR MODEL BLACK
07-15 Wrangler (JK) 2 DR 56656901
07 or 13-15 Wrangler (JK) 4 DR 56647901
08-12 Wrangler (JK) 4 DR 56646501
03-06 Wrangler (TJ, LJ) 56647601
97-02 Wrangler (TJ) 56647101
Each front cover comes with 5
individual MOLLE pouches.
Each rear cover comes with 2 individual MOLLE pouches.
››J
››J
G.E.A.R. CUSTOM FIT COVERS
MAY2015
51SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
• 600 D striped canvas• Heavy duty zippers• Heavy duty hook & loop fasteners • MOLLE attachment points front and
rear for extra storage space. • Zipper and Velcro closures for the ultimate fit• Three-piece kit• Foam-lined fabric
YEAR MODEL DESCRIPTION PART#
97-2002 Jeep TJ Molle Roll Bar Pad Cover Kit 5665101
03-2006 Jeep TJ Molle Roll Bar Pad Cover Kit 5665201
07-2015 Jeep JK 2 Door Molle Roll Bar Pad Cover Kit 5666101
07-2015 Jeep JK 4 Door Molle Roll Bar Pad Cover Kit 5666201
REPLACEMENT MOLLEROLL BAR PADDING KIT
Replace your worn and faded roll bar covers with Smittybilt’s MOLLE roll bar covers.
ROLL CAGE MOLLE PADDING
WEIGHT DISTRIBUTING HITCH WITH ADJUSTABLE BALL MOUNT AND SHANK• Up to 1,400lb maximum tongue weight• Up to 14,000lb maximum gross weight rating• Forged, tapered, round spring steel bars for a smoother ride• Includes bolt-together adjustable shank• Operated with a positive cam latching hook up action• Adjustable ball mount height for different
lift sizes, 5.5" max drop• Includes hookup brackets, spring bars,
chains, adjustable ball mount.
DESCRIPTION PART#
Weight Distributing Hitch 87550
Ball not included
XRC FOOT PEGS• Include spring to lock in the dome light switch• Smittybilt exclusive bolt engagement to
eliminate flex and rattling• Rubber trim gasket to reduce paint chip• 1/8" CNC steel constructions• JK models fit front and rear hinges• TJ models include dome light lock out spring• Aggressive styling with winglets to help foot placement• Finished in the signature series matte black textured powder coat.• Smittybilt Advantage Warranty• Comes as pairs
FOOTPEGS PART#
TJ Wrangler 7620
JK Wrangler (front or rear) 7619
ALWAYS wear a seat belt when driving, but especially when you have removed the doors. Check your local rules of the road to be sure that driving without the doors is legal.
MAR2015
MAR2015
MAR2015
52 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
CROSSBAR BRACKET KIT• Can be use to attach Yakima or
Thule type of accessories• 4-Piece kit• CNC machined steel• Fits all Defender by Smittybilt racks• Easy install
DESCRIPTION PART#
4' Defender Rack LED Light Bar Mount Kit D8084
4.5' Defender Rack LED Light Bar Mount Kit D8045
5' Defender Rack LED Light Bar Mount Kit D8085
DESCRIPTION PART#
Defender LED Light Bar Tabs D8082
DESCRIPTION PART#
Defender LED Light Bar Brackets D8083
DEFENDER RACK LED LIGHT BAR MOUNT KIT• Dual level LED light bar mounting system• CNC machine light tabs, 4 tabs included• Truly adjustable for all sizes of LED light bars with side
mounting post• Light tabs track on 1" bars included• Mount LED bar up to the width of your Rack• No drilling required, side brackets included• Defender Rack required
DEFENDER LED LIGHT BAR TABS • CNC machine light tabs• Sold in pairs• Light tabs fits 1" bars• No drilling required
DEFENDER LED LIGHT BRACKETS• Mount 50" LED lightbars• Sold in pairs• Light tabs fits 1" bars• No drilling required• Hardware included* works with 4.5' racks only
YEAR MODEL PART#
07-15 Wrangler (JK) 4/2-DR 76718
DESCRIPTION PART#
Crossbar Bracket Kit D8081
JK BASKET• 32" wide x 18" deep x 4" tall• Accepts Defender accessories, such as shovel and
jack mount• Bolts on to all Jeep Wrangler 07-15 tail gates• Two-stage textured matte black powdercoat finish - 5
year limited warranty• Smittybilt Advantage limited lifetime warranty• No drilling is required for a 100% completely bolt-
on installation!• Holds up to 35lbs of gear
Defender Accessories / Jeep® - RACKS
JUN2015
APR2015
53SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
CARGO RESTRAINT/ TOPS
C-RES2 HD CARGO RESTRAINT SYSTEM
YEAR MODEL PART#
97-06 Wrangler (TJ) 561135
07-15 Wrangler (JK) 2-DR 571135
07-15 Wrangler (JK) 4-DR 581135
C•RES HD• Powerful solution for
restraining cargo within your Jeep
• Easy to install with no tools necessary
• No factory hardware required
• Triple stitched• Black oxide grommets for
added hook up points• Rugged 2" Polyester webbing• Tensile strength of up to 1,200 lbs• Side and rear curtains included• Can be installed with Hard Top• Strap items to netting system for extra storage• Provides coverage from the sound bar to the tailgate Hard or Soft Tops can be used in
conjuction with CRES HD.J55 OVER 55 YEARS
1956-2015 5YRLIMITED WARRANTY
LIFETIMEWARRANTY
CLOAK EXTENDED MESH TOP
YEAR MODEL DESCRIPTION PART#
97-06 Wrangler (TJ) Mesh Extended Top 95600
07-15 Wrangler (JK) 2-DR Mesh Extended Top 95100
07-15 Wrangler (JK) 4-DR Mesh Extended Top 95500
• Easy install no tools needed• No header required• Stays on with hard or soft top installed• Reduces wind noise• Installs with heavy duty bungee cords• UV and mildew resistant• Durable long lasting PVC coated mesh material• Reduces the heat and glare of the
sun while allowing cool air to flow through
CLOAK EXTENDED MESH TOPThe Cloak Extended Mesh Top gives you the best of both worlds; reduces the heat and glare of the sun while allowing the cool air to flow through the unique mesh design. Manufactured out of durable long lasting PVC coated mesh material, UV treated material. Easy and quick install no other hardware required.
DEC2014
JUN2015
54 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
• Crystal clear, high definition, 40ml DOT Vinyl – the thickest in the industry• 30oz multi-layered, wrinkle free material that is 24% thicker than O.E. specs• Triple-layered for maximum noise reduction• Exceptional cold-weather performance with ability to handle frigid temperatures• Maximum UV protection• Highest quality threads that is UV protected and rot-resistant.• Double layer stitching • Large, maximum-strength zippers with self-correcting features in all weather• European refinement• Requires factory original hardware for installation
PREMIUM STRIPED CANVAS REPLACEMENT TOPS
YEAR MODEL PART#
97-06 Wrangler (TJ) 9974235
07-09 Wrangler (JK) 2-DR 9074235
07-09 Wrangler (JK) 4-DR 9084235
10-15 Wrangler (JK) 2-DR 9076235
10-15 Wrangler (JK) 4-DR 9086235Heavy-Duty self correcting zippers Exterior Stripe Canvas Zippered Pouch Roof Pockets
TRIPLE-LAYERED FOR MAXIMUM NOISE REDUCTION:First layer: Exterior Stripe CanvasCenter layer: rubber PVC for maximum water proof protectionInner layer: smooth cotton canvas for ultimate interior noise
reduction and sharp look
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
CENTER- Rubber PVC for maximum water proof protection
INTERIOR-Clothing Backing
EXTERIOR- Stripe Canvas
EXCEPTIONAL COLD-WEATHER PERFORMANCE.
EXCEEDS SAE J323BSTANDARDS OF -22O F
Whether you’re hitting the trails or going out for a night on the town, Smittybilt’s all new Premium Replacement Top will make a great impression. These Premium Tops feature high definition, 40ml DOT glass – the thickest in the industry – for reduced noise and extended soft top life. The quarter panel and rear windows are 30% dark tinted for privacy and privacy. We’ve also upgraded the top with a 30 oz. multi-layered, wrinkle free material that is 24% thicker than O.E. specs. The sleek European styling of the outer canvas layer covers a core of waterproof PVC; the smooth cotton canvas of the interior adds luxury and lowers ambient road noise. Double-layered stitching with UV-protected thread and maximum-strength, self-correcting zippers makes this great for the most extreme weather conditions.
Premium Replacement Top - SOFT TOPS
IN STOCKNOW
55SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
BOWLESS COMBO TOP
YEAR MODEL PART#
97-06 Wrangler (TJ) w/ Door Skins 9973235
07-15 Wrangler (JK) 2-DR 9073235
07-15 Wrangler (JK) 4-DR 9083235
Bowless Combo Top - SOFT TOPS
Molle/Pals straps for extra storage
Clean Lines, No External Straps
Internal storage for side and rear curtains
Heavy Duty Hook and Loop system
COLOR CHART
Black Diamond-35
Storage pockets included
BOWLESS TOP• Functions as primary top• Remove sides to convert to extended top• No factory bow hardware required• 23oz. Marine grade durable vinyl coated soft top • O.E.M. diamond-style fabrics and 30ml DOT tinted glass• Resists fading and stretching• Seams are heat-sealed to prevent leaking and wick stop threads seal
stitch holes• Internal storage compartments and MOLLE attachments• Self-correcting zippers run smoother and last longer• Side windows and rear window completely zip out• Requires windshield header, factory door surrounds and tailgate bar
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
DOT approved first quality window materials are used. Fits over original
factory 0.E. hardware/framework.
DEC2014
56 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
XRC REAR QUARTER PANEL SKINS• Made of 1/8” Cold rolled Steel to
provide maximum protection• Maximum rear quarter panel protection
from door jam to tailgate jam• Contours perfectly to the OE panels• Integrated protection for
rear tail lights• Have the ability to bolt the
stock fenders back on• Two-Stage Textured Matte
Black Finish• Powder Coat Finish -
5 Year Limited Warranty• Smittybilt Limited
Lifetime Warranty• Drilling required,
all Hardware included• Sold as Pairs
TEXTURED BLACK Dual-Stage Textured Black Powder Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
XRC JK BODY ARMOR SKINSFront/Rear• Made of 1/8” Cold rolled Steel to provide maximum protection• Have the ability to bolt the stock fenders back on• Two-Stage Textured Matte Black Finish• Powder Coat Finish - 5 Year Limited Warranty• Smittybilt Limited Lifetime Warranty• Drilling required, all Hardware included• Sold as Pairs
Smittybilt has everything you need to protect your Jeep® JK Wrangler and Wrangler Unlimited from bumper to bumper. Smittybilt¹s XRC front tube fenders, rear tube fenders, and rear quarter panels are made from 1/8-inch cold rolled steel that is perfectly contoured to the factory body lines and includes the necessary mounting hardware. All XRC armoris powdercoated in a two-stage textured matte black finish and feature Smittybilt¹s limited lifetime warranty.
YEAR MODEL DESCRIPTION PART#
07-15 JK Wrangler 2/4 DR Front Skin 76980
07-15 JK Wrangler 2 DR Rear Skin 76981
07-15 JK Wrangler 4 DR Rear Skin 76982
Skins - ARMOR
APR2015
57SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
JK XRC FLUX FLARES• Double Articulated tube fenders• Provides extra outer tire clearance for larger tires under full
suspension articulation• 3/4" L.E.D. turn signal lights included • Keep your center of gravity lower• 6" wide and providing extra 3" of suspension travel• Sturdy Flares made of CNC bent 1.5" dia tube covered with
1/8" laser cut cold rolled sheet metal• Spacers and brackets provided to tie fenders to sub frame
for extra strength• Minimal modification
for installation, bolts to same OE mounting points
• Sold as pairs• Preserve the factory
inner liner
TEXTURED BLACK Dual-Stage Textured Black Powder Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
Flux Fenders / JK - ARMOR
DESCRIPTION PART#
3/4" L.E.D. Turn Signal L-1420
YEAR MODEL DESCRIPTION PART#
07-15 JK Wrangler 2/4 DR Front Flare 76838
07-15 JK Wrangler 2/4 DR Rear Flare 76839
• Sold in pairs• 12" Lead wires• Grommet style mounts• Super bright L.E.D. lights• Waterproof casing
JUN2015
58 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
M-1 SLIDERS
TEXTURED BLACK Dual-Stage Textured Black Powder Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
M-1 SLIDERS - DODGE RAM
YEAR MAKE MODEL BLACK#
09-15 Dodge Ram 1500/2500/3500 Crew Cab 616802
09-15 Dodge Ram 1500/2500 Quad Cab 616803M-1 SLIDERS - FORD
YEAR MAKE MODEL BLACK#
09-14 Ford F150 Super Cab 616832
2015 Ford F150 Super Cab 616834
09-14 Ford F150 Super Crew 616835
2015 Ford F150 Super Crew 616833
99-15 Ford F250/F350 Super Duty Crew Cab 616831
99-15 Ford F250/F350 Super Duty Super Cab 616837
M-1 SLIDERS - CHEVY
YEAR MAKE MODEL BLACK#
14-15 Chevy/GMC Silverado/Sierra 1500 Crew Cab/2500/3500 616822
99-13 Chevy/GMC Silverado/Sierra 1500/2500 Crew Cab 616820
14-15 Chevy/GMC Silverado/Sierra 1500 Extended Cab/2500/3500 616821
99-13 Chevy/GMC Silverado/Sierra 1500/2500 Crew Cab 616823
M-1 SLIDERS - TOYOTA
YEAR MAKE MODEL BLACK#
06-15 Toyota FJ Cruiser 616850
07-15 Toyota Tundra Crew Max 616845
07-15 Toyota Tundra Double Cab 616840
05-15 Toyota Tacoma Double Cab 616844
05-15 Toyota Tacoma Extended Cab 616846
M-1 SLIDERS• Aggressive style• One piece design - manufactured from 1.75" .120 wall tubing• Dual girder system provides the ultimate protection for the sides and under
section of your truck• Provides protection and a step at the same time• Bolts up without drilling or modifications to the vehicle• Wheel-to-wheel for maximum protection• Each slider comes with 1/8" steel platform CNC and dimpled steps for sure
footed entry or exit• Dual purpose rear slider flare for added rear wheel protection • Rear step point to access front of bed • Finished in the signature series matte black textured powder coat
TOYOTA TUNDRACNC dimple die steps
Manufactured from1.75" .120 wall tubing
JUN2014
APPLICATIONSWILL BEGIN ARRIVING
59SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
STREET LIGHT BAR
YEAR MAKE MODEL INSTALLATION PART#
14-15 Chevy Silverado 1500 Drilling 110080
07-13 Chevy Silverado 1500 Drilling 110040
99-02 Chevy Silverado 1500/2500 (Except HD) Drilling 110020
99-02 Chevy Silverado HD 1500/2500/3500 Drilling 110030
11-14 Chevy Silverado HD 2500/3500 Drilling 110070
2015 Chevy Silverado HD 2500/3500 Drilling 110090
07-10 Chevy Silverado HD 1500/2500/3500 Drilling 110050
03-06 Chevy Silverado HD 1500/2500/3500 Drilling 110010
88-98 Chevy Silverado 1500/2500/3500 Drilling 110060
09-15 Dodge Ram 1500 No Drilling 120020
02-08 Dodge Ram 1500 Drilling 120010*
04-15 Dodge Ram HD 2500/3500 Drilling 120030
STREET LIGHT BAR
STREET LIGHT BARThe Street Bar is a quick-fix for mounting a set of lights on the front-end of your Truck or SUV. Each “Street Bar” is designed to follow the contours of your factory bumper and comes with four light tabs that can accommodate up to a 9” light. Each bar is manufactured from 1.25” x .095” tubing and finished in a high-gloss black powder coat. The installation is a snap, and once mounted will be vibration-resistant.
DIRECT BOLT-ON
GLOSS BLACKDual-Stage Gloss Black Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
STREET LIGHT BAR
YEAR MAKE MODEL INSTALLATION PART#
04-08 Ford F150 No Drilling 130010
09-13 Ford F150 No Drilling 130050
2015 Ford F150 No Drilling 130070
99-07 Ford F250/F350 Super Duty No Drilling 130020
08-10 Ford F250/F350 Super Duty No Drilling 130040
11-15 Ford F250/F350 Super Duty No Drilling 130060
04-15 Nissan Titan/Armada Drilling 140010
12-15 Toyota Tacoma Drilling 150020
05-11 Toyota Tacoma Drilling 150010
07-13 Toyota Tundra Drilling 150030
14-15 Toyota Tundra Drilling 150040
1.25" x.095" Tubing
High-gloss powder coat finish
Four tabs toaccommodate up to 9" lights
Angled shape foreasy installation
›› * Not for Sport bumpers.L
IN STOCKNOW
60 SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com SMITTYBILT • 400 W. Artesia Blvd., Compton, CA 90220 888.717.5797 • www.smittybilt.com
DESCRIPTION PART#
Adventure Box 18605
DIRECT BOLT-ONBolts directly to the floor
48"6.8"
17"
17"ADVENTURE BOX• Gas charges struts for assisted opening• Precision manufactured of 16-gauge steel• Spring loaded D-rings anchor points
on top and side of tactical box• Ergonomic side carrying handles provided• EPDM rubber gaskets to keep items inside dry• Hardware included for securing tactical box
to flat surfaces• Lockable storage system• Convenient large opening top lid for quick access• Front drawer system to quickly access and
organize smaller items• Durable semi-gloss black powder coat• Dims, 46”x16”x16”
D-RingLock included
GRILLE SAVERS/ MISC
TEXTURED BLACK Dual-Stage Textured Black Powder Coating Special “E-Coat" Inside & OutAcid bath dipped to remove impurities
GRILLE SAVERS GEN2• Each Grille Saver is custom fit for each application and provides a clean
look while protecting your front end• Made of 14 gauge CNC plate with 2" overrider• Pre-drilled for optional off-road lights• Mounting tabs provided for up to 12" dual roll LED lght bar• Welds are ground smooth for a clean finished look• Skid plate included• L.E.D. light bars not included
GRILLE SAVERS GEN2
YEAR MAKE MODEL BLACK STAINLESS
14-15 Chevy Chevy 1500 61043 61044
07-13 Chevy/GMC Silverado/Sierra 1500 61033 61034
11-15 Chevy/GMC Silverado/Sierra HD 2500/3500 61045 61046
07-15 Chevy/GMC Avalanche Suburban/Tahoe/Yukon XL- 1500 61035 61036
10-15 Dodge Ram 1500, 2500, 3500 63037 63038
10-15 Dodge Ram 2500, 3500, MegaCab 63039 63040
04-15 Ford F150 65053 65054
11-15 Ford F250/350/450/550 SuperDuty 65115 65116
04-15 Nissan Titan 67101 67102
05-15 Toyota Tacoma 64011 64012
07-15 Toyota Tundra 64031 64032
55 OVER 55 YEARS1956-2015 5YR
LIMITED WARRANTY
LIFETIMEWARRANTY
Stainless Steel
Black Powdercoat
12" Dual roll LED Light bar mount tab
up to 9" light mount tab
Lights not included
JUN2014
APPLICATIONSWILL BEGIN ARRIVING
MAR2015