new part numbers for cord grips - allied electronics · new part numbers for cord grips sab north...

344 Kaplan Drive

Fairfield, NJ 07004

Tel 973-276-0500

Fax 973-276-1515

Toll Free 866-722-2974

www.sabcable.com

______________________________________________________________________________

New Part Numbers for Cord Grips

SAB North America offers a complete line of Metric, PG, and NPT Cord Grip fittings that compliment SAB's full line of cable products.

We offer a ONE stop solution for your installation.

We have updated our part numbers for our cord grip line of products. We are working to make it easier for you

-the customer. Our new smart part numbering system will make it easier to identify the product by incorporating the type and thread size of the cord grip. Nothing else has changed with the product.

Faster than you think

Best regards,

Rick Orsini

SAB Cable

Website: www.sabcable.com Email: [email protected]

CG 100 M SERIES PLASTIC CABLE GLANDS

Metric thread

Technical Data: Material Polyamide 6

Seal Chloroprene (CR)

Color RAL 7001 (Gray)

RAL 9005 (Black)

Protection Class IP 68 - 5 Bar

Temperature Range -20°C to +100°C permanent

-30°C to +150°C intermittent

Flammabilty V2 (According to UL 94)

Approvals UL, UR, CSA, VDE

Liquid tight seal, fast & easy installation, wide clamping range, multi-purpose

applications, easy handling.

Part Number Thread Size

Clamping Range Ø

(min-max) Thread Diameter

(TD)

Wrenching Flats (SW)

Thread Length

Height (H)

UL¹ Gray Black inches mm inches mm inches mm inches inches

Metric

PMG-12 PMB-12 M12x1.5 .118 - .256 3.0 - 6.5 0.472 12.0 0.591 15.0 0.315 0.866 UR

PMG-16* PMB-16* M16x1.5 .197 - .394 5.0 - 10.0 0.630 16.0 0.866 22.0 0.394 1.102 UR

PMG-20* PMB-20* M20x1.5 .236 - .473 6.0 - 12.0 0.787 20.0 0.945 24.0 0.394 1.142 UL

PMG-20C* PMB-20C* M20x1.5 .394 - .552 10.0 - 14.0 0.787 20.0 1.063 27.0 0.394 1.220 UL

PMG-25* PMB-25* M25x1.5 .512 - .709 13.0 - 18.0 0.984 25.0 1.299 33.0 0.394 1.378 UL

PMG-32 PMB-32 M32x1.5 .709 - .984 18.0 - 25.0 1.260 32.0 1.654 42.0 0.709 1.575 UL

PMG-40 PMB-40 M40x1.5 .866 - 1.260 22.0 - 32.0 1.575 40.0 2.087 53.0 0.709 1.929 UL

PMG-50 PMB-50 M50x1.5 1.181 - 1.496 30.0 - 38.0 1.969 50.0 2.362 60.0 0.709 1.929 UL

PMG-63 PMB-63 M63x1.5 1.339 - 1.732 34.0 - 44.0 2.480 63.0 2.559 65.0 0.709 1.929 UL

Metric with Reducer Bushings†

PMG-12R PMB-12R M12x1.5 .079 - .197 2.0 - 5.0 0.472 12.0 0.591 15.0 0.315 0.866 -

PMG-16R* PMB-16R* M16x1.5 .118 - .276 3.0 - 7.0 0.630 16.0 0.866 22.0 0.394 1.102 -

PMG-20R* PMB-20R* M20x1.5 .197 - .355 5.0 - 9.0 0.787 20.0 0.945 24.0 0.394 1.142 -

PMG-20RC* PMB-20RC* M20x1.5 .276 - .473 7.0 - 12.0 0.787 20.0 1.063 27.0 0.394 1.220 -

PMG-25R* PMB-25R* M25x1.5 .354 - .630 9.0 - 16.0 0.984 25.0 1.299 33.0 0.394 1.378 -

PMG-32R PMB-32R M32x1.5 .472 - .788 12.0 - 20.0 1.260 32.0 1.654 42.0 0.709 1.575 -

PMG-40R PMB-40R M40x1.5 .788 - 1.024 20.0 - 26.0 1.575 40.0 2.087 53.0 0.709 1.929 -

PMG-50R PMB-50R M50x1.5 .984 - 1.220 25.0 - 31.0 1.969 50.0 2.362 60.0 0.709 1.929 -

PMG-63R PMB-63R M63x1.5 1.142 - 1.378 29.0 - 35.0 2.480 63.0 2.559 65.0 0.709 1.929 -

*Available with longer thread

† Not currently VDE approved

¹ Additional UL approvals in progress


CG 100 P SERIES PLASTIC CABLE GLANDS

PG thread




RAL 9005 (Black)





Approvals UL, UR, CSA

Liquid tight seal, fast & easy installation, wide clamping range, multi-purpose applications,

easy handling.


Clamping Range Ø


(TD) Wrenching Flats

(SW) Thread Length

Height (H)


PG

PPG-7 PPB-7 PG 7 .118 - .256 3.0 - 6.5 0.492 12.5 0.591 15.0 0.315 0.866 UR

PPG-9 PPB-9 PG 9 .157 - .315 4.0 - 8.0 0.598 15.2 0.748 19.0 0.315 0.984 UR

PPG-11 PPB-11 PG 11 .197 - .394 5.0 - 10.0 0.732 18.6 0.866 22.0 0.315 1.102 UR

PPG-13 PPB-13 PG 13.5 .236 - .472 6.0 - 12.0 0.803 20.4 0.945 24.0 0.355 1.142 UL

PPG-16 PPB-16 PG 16 .394 - .551 10.0 - 14.0 0.886 22.5 1.063 27.0 0.394 1.220 UL

PPG-21 PPB-21 PG 21 .512 - .709 13.0 - 18.0 1.114 28.3 1.299 33.0 0.433 1.378 UL

PPG-29 PPB-29 PG 29 .709 - .984 18.0 - 25.0 1.457 37.0 1.654 42.0 0.433 1.575 UL

PPG-36 PPB-36 PG 36 .866 - 1.261 22.0 - 32.0 1.850 47.0 2.087 53.0 0.512 1.929 UL

PPG-42 PPB-42 PG 42 1.181 - 1.496 30.0 - 38.0 2.126 54.0 2.362 60.0 0.512 1.929 UL

PPG-48 PPB-48 PG 48 1.339 - 1.732 34.0 - 44.0 2.335 59.3 2.559 65.0 0.552 1.929 UL

PG with Reducer Bushings

PPG-7R PPB-7R PG 7 .079 - .197 2.0 - 5.0 0.492 12.5 0.591 15.0 0.315 0.866 -

PPG-9R PPB-9R PG 9 .079 - .236 2.0 - 6.0 0.598 15.2 0.748 19.0 0.315 0.984 -

PPG-11R PPB-11R PG 11 .118 - .276 3.0 - 7.0 0.732 18.6 0.866 22.0 0.315 1.102 -

PPG-13R PPB-13R PG 13.5 .197 - .355 5.0 - 9.0 0.803 20.4 0.945 24.0 0.355 1.142 -

PPG-16R PPB-16R PG 16 .276 - .473 7.0 - 12.0 0.886 22.5 1.063 27.0 0.394 1.220 -

PPG-21R PPB-21R PG 21 .354 - .630 9.0 - 16.0 1.114 28.3 1.299 33.0 0.433 1.378 -

PPG-29R PPB-29R PG 29 .472 - .788 12.0 - 20.0 1.457 37.0 1.654 42.0 0.433 1.575 -

PPG-36R PPB-36R PG 36 .788 - 1.024 20.0 - 26.0 1.850 47.0 2.087 53.0 0.512 1.929 -

PPG-42R PPB-42R PG 42 .984 - 1.220 25.0 - 31.0 2.126 54.0 2.362 60.0 0.512 1.929 -

PPG-48R PPB-48R PG 48 1.142 - 1.378 29.0 - 35.0 2.335 59.3 2.559 65.0 0.552 1.929 -

¹Additional UL approvals in process


CG 100 N SERIES PLASTIC CABLE GLANDS

NPT thread




RAL 9005 (Black)





Approvals UR, UL, CSA

Liquid tight seal, fast & easy installation, wide clamping range, multi-purpose

applications, easy handling.


Clamping Range Ø



(SW) Thread Length

Height (H)


NPT

PNG-3/8 PNB-3/8 NPT 3/8 .197 - .394 5.0 - 10.0 0.653 17.0 0.866 22.0 0.590 1.102 UR

PNG-1/2 PNB-1/2 NPT 1/2 .236 - .472 6.0 - 12.0 0.809 21.0 0.945 24.0 0.590 1.141 UL

PNG-1/2C PNB-1/2C NPT 1/2 .394 - .551 10.0 - 14.0 0.809 21.0 1.063 27.0 0.590 1.220 UL

PNG-3/4 PNB-3/4 NPT 3/4 .512 - .709 13.0 - 18.0 1.020 26.0 1.299 33.0 0.590 1.377 UL

PNG-1 PNB-1 NPT 1 .709 - .984 18.0 - 25.0 1.275 32.0 1.654 42.0 0.709 1.574 UL

NPT with Reducing Bushings†

PNG-3/8R PNB-3/8R NPT 3/8 .118 - .276 3.0 - 7.0 0.653 17.0 0.866 22.0 0.590 1.102 -

PNG-1/2R PNB-1/2R NPT 1/2 .197 - .354 5.0 - 9.0 0.809 21.0 0.945 24.0 0.590 1.141 -

PNG-1/2RC PNB-1/2RC NPT 1/2 .276 - .472 7.0 - 12.0 0.809 21.0 1.063 27.0 0.590 1.220 -

PNG-3/4R PNB-3/4R NPT 3/4 .354 - .630 9.0 - 16.0 1.020 26.0 1.299 33.0 0.590 1.377 -

PNG-1R PNB-1R NPT 1 .472 - .787 12.0 - 20.0 1.275 32.0 1.654 42.0 0.709 1.574 -

Part Number

Thread Size

Height Diameter Wrenching Flats

UL Gray Black inches mm inches mm inches mm

NPT

LNG-3/8 LNB-3/8 NPT 3/8 0.197 5.0 0.984 25.0 0.866 22.0 -

LNG-1/2 LNB-1/2 NPT 1/2 0.197 5.0 1.201 30.5 1.064 27.0 -

LNG-3/4 LNB-3/4 NPT 3/4 0.197 5.0 1.476 37.5 1.299 33.0 -

LNG-1 LNB-1 NPT 1 0.236 6.0 1.831 46.5 1.850 47.0 -

NPT PLASTIC LOCK NUTS


† Not currently CSA approved


CG 200 M SERIES SPIRAL CABLE GLAND

Metric thread

Technical Data: Material Polyamide 6 Seal Chloroprene (CR)


RAL 9005 (Black)


Temperature Range - 20°C to +100°C permanent

- 30°C to +150°C intermittent


Approvals UL, UR, CSA

Strain relief gland offering maximum protection against conductor fatigue caused

by flexing cables.


Clamping Range Ø



(SW) Thread Length

Height (H)


Metric

FMG-12 FMB-12 M12x1.5 .118 - .256 3.0 - 6.5 0.472 12.0 0.591 15.0 0.315 2.165 UR

FMG-16 FMB-16 M16x1.5 .197 - .394 5.0 - 10.0 0.630 16.0 0.866 22.0 0.394 3.110 UR

FMG-16L FMB-16L M16x1.5 .197 - .394 5.0 - 10.0 0.630 16.0 0.866 22.0 0.591 3.110 -

FMG-20 FMB-20 M20x1.5 .236 - .472 6.0 - 12.0 0.787 20.0 0.945 24.0 0.394 3.740 UL

FMG-20L FMB-20L M20x1.5 .236 - .472 6.0 - 12.0 0.787 20.0 0.945 24.0 0.591 3.740 -

FMG-20 FMB-20 M20x1.5 .394 - .551 10.0 - 14.0 0.787 20.0 1.063 27.0 0.394 4.134 UL

FMG-20CL FMB-20CL M20x1.5 .394 - .551 10.0 - 14.0 0.787 20.0 1.063 27.0 0.591 4.134 UL

FMG-25 FMB-25 M25x1.5 .512 - .709 13.0 - 18.0 0.984 25.0 1.299 33.0 0.394 4.646 UL

FMG-25L FMB-25L M25x1.5 .512 - .709 13.0 - 18.0 0.984 25.0 1.299 33.0 0.591 4.646 -

Metric with Reducer Bushings

FMG-12R FMB-12R M12x1.5 .079 - .197 2.0 - 5.0 0.472 12.0 0.591 15.0 0.315 2.165 -

FMG-16R FMB-16R M16x1.5 .118 - .276 3.0 - 7.0 0.630 16.0 0.866 22.0 0.394 3.110 -

FMG-16RL FMB-16RL M16x1.5 .118 - .276 3.0 - 7.0 0.630 16.0 0.866 22.0 0.591 3.110 -

FMG-20R FMB-20R M20x1.5 .197 - .354 5.0 - 9.0 0.787 20.0 0.945 24.0 0.394 3.740 -

FMG-20RL FMB-20RL M20x1.5 .197 - .354 5.0 - 9.0 0.787 20.0 0.945 24.0 0.591 3.740 -

FMG-20R FMB-20R M20x1.5 .276 - .472 7.0 - 12.0 0.787 20.0 1.063 27.0 0.394 4.134 -

FMG-20RCL FMB-20RCL M20x1.5 .276 - .472 7.0 - 12.0 0.787 20.0 1.063 27.0 0.591 4.134 -

FMG-25R FMB-25R M25x1.5 .354 - .551 9.0 - 14.0 0.984 25.0 1.299 33.0 0.394 4.646 -

FMG-25RL FMB-25RL M25x1.5 .354 - .551 9.0 - 14.0 0.984 25.0 1.299 33.0 0.591 4.646 -

"L" indicates Longer Thread ¹Additional UL approvals in process


CG 200 P SERIES SPIRAL CABLE GLAND

PG thread



RAL 9005 (Black)






by flexing cables.

UL and CSA approvals in process

Part Number

Clamping Range Ø



(SW) Thread Length

Height (H)

Thread Size Gray Black inches mm inches mm inches mm inches inches

PG

FPG-7 FPB-7 PG 7 .118 - .256 3.0 - 6.5 0.492 12.5 0.591 15.0 0.315 2.165

FPG-9 FPB-9 PG 9 .157 - .315 4.0 - 8.0 0.598 15.2 0.748 19.0 0.315 2.598

FPG-11 FPB-11 PG 11 .197 - .394 5.0 - 10.0 0.732 18.6 0.866 22.0 0.315 3.110

FPG-13 FPB-13 PG 13.5 .236 - .472 6.0 - 12.0 0.803 20.4 0.945 24.0 0.355 3.740

FPG-16 FPB-16 PG 16 .394 - .551 10.0 - 14.0 0.886 22.5 1.063 27.0 0.394 4.134

FPG-21 FPB-21 PG 21 .512 - .709 13.0 - 18.0 1.114 28.3 1.299 33.0 0.433 4.646

PG with Reducer Bushing

FPG-7R FPB-7R PG 7 .079 - .197 2.0 - 5.0 0.492 12.5 0.591 15.0 0.315 2.165

FPG-9R FPB-9R PG 9 .079 - .236 2.0 - 6.0 0.598 15.2 0.748 19.0 0.315 2.598

FPG-11R FPB-11R PG 11 .118 - .276 3.0 - 7.0 0.732 18.6 0.866 22.0 0.315 3.110

FPG-13R FPB-13R PG 13.5 .197 - .354 5.0 - 9.0 0.803 20.4 0.945 24.0 0.355 3.740

FPG-16R FPB-16R PG 16 .276 - .472 7.0 - 12.0 0.886 22.5 1.063 27.0 0.394 4.134

FPG-21R FPB-21R PG 21 .354 - .630 9.0 - 16.0 1.114 28.3 1.299 33.0 0.433 4.646


CG 200 N SERIES SPIRAL CABLE GLAND

NPT thread



RAL 9005 (Black)





Approvals: UR, UL, CSA


by flexing cables.

† Not currently CSA approved



Clamping Range Ø



(SW) Thread Length

Height (H)


NPT

FNG-3/8 FNB-3/8 NPT 3/8 .197 - .394 5.0 - 10.0 0.653 16.6 0.866 22.0 0.590 3.110 UR

FNG-1/2 FNB-1/2 NPT 1/2 .236 - .472 6.0 - 12.0 0.809 20.5 0.945 24.0 0.590 3.740 UL

FNG-1/2C FNB-1/2C NPT 1/2 .394 - .551 10.0 - 14.0 0.815 20.7 1.063 27.0 0.590 4.133 UL

FNG-3/4 FNB-3/4 NPT 3/4 .551 - .709 14.0 - 18.0 1.020 25.9 1.299 33.0 0.590 4.645 UL

NPT with Reducer Bushings†

FNG-3/8R FNB-3/8R NPT 3/8 .118 - .276 3.0 - 7.0 0.653 16.6 0.866 22.0 0.590 3.110 -

FNG-1/2R FNB-1/2R NPT 1/2 .197 - .354 5.0 - 9.0 0.809 20.5 0.945 24.0 0.590 3.740 -

FNG-1/2RC FNB-1/2RC NPT 1/2 .276 - .472 7.0 - 12.0 0.815 20.7 1.063 27.0 0.590 4.133 -

FNG-3/4R FNB-3/4R NPT 3/4 .354 - .630 9.0 - 16.0 1.020 25.9 1.299 33.0 0.590 4.645 -


Technical Data:

Material Polyamide 6 (30% Glass Fiber reinforced)



RAL 9005 (Black)

Temperature Range

- 20°C to +100°C permanent



Hexagonal Lock Nuts of polyamide, glass fiber reinforced.

Part Number

Thread Size


Gray Black inches mm inches mm inches mm

Metric

LMG-12 LMB-12 M12x1.5 0.197 5.0 0.768 19.5 0.709 18.0

LMG-16 LMB-16 M16x1.5 0.197 5.0 0.953 24.2 0.866 22.0

LMG-20 LMB-20 M20x1.5 0.236 6.0 1.126 28.6 1.024 26.0

LMG-25 LMB-25 M25x1.5 0.236 6.0 1.378 35.0 1.260 32.0

LMG-32 LMB-32 M32x1.5 0.276 7.0 1.815 46.1 1.614 41.0

LMG-40 LMB-40 M40x1.5 0.276 7.0 2.177 55.3 1.969 50.0

LMG-50 LMB-50 M50x1.5 0.315 8.0 2.602 66.1 2.362 60.0

LMG-63 LMB-63 M63x1.5 0.315 8.0 3.248 82.5 2.953 75.0

PG

LPG-7 LPB-7 PG 7 0.197 5.0 0.827 21.0 0.748 19.0

LPG-9 LPB-9 PG 9 0.197 5.0 0.945 24.0 0.866 22.0

LPG-11 LPB-11 PG 11 0.197 5.0 1.024 26.0 0.945 24.0

LPG-13 LPB-13 PG 13.5 0.236 6.0 1.142 29.0 1.063 27.0

LPG-16 LPB-16 PG 16 0.236 6.0 1.299 33.0 1.181 30.0

LPG-21 LPB-21 PG 21 0.276 7.0 1.535 39.0 1.417 36.0

LPG-29 LPB-29 PG 29 0.276 7.0 1.969 50.0 1.811 46.0

LPG-36 LPB-36 PG 36 0.315 8.0 2.598 66.0 2.362 60.0

LPG-42 LPB-42 PG 42 0.315 8.0 2.874 73.0 2.559 65.0

LPG-48 LPB-48 PG 48 0.315 8.0 3.071 78.0 2.756 70.0

NPT

LNG-3/8 LNB-3/8 NPT 3/8 0.197 5.0 0.984 25.0 0.866 22.0

LNG-1/2 LNB-1/2 NPT 1/2 0.197 5.0 1.201 30.5 1.063 27.0

LNG-3/4 LNB-3/4 NPT 3/4 0.197 5.0 1.476 37.5 1.299 33.0

LNG-1 LNB-1 NPT 1 0.236 6.0 1.831 46.5 1.850 47.0

ACCESSORIES

PLASTIC LOCKNUTS: Metric, PG & NPT thread


Technical Data: Material Brass, Nickel Plated

Clamping Insert Polyamide 6


O-Ring NBR


Temperature Range

-20°C to +100°C permanent



Approvals UR, UL, VDE


Clamping Range Ø


(TD) Wrenching Flats Cap

(SW1) Thread Length

Height (H)

UL¹ inches mm inches mm inches mm inches inches

Metric

MMS-12 M12x1.5 .118 - .256 3.0 - 6.5 0.472 12.0 0.551 14.0 0.236 0.846 UR

MMS-16* M16x1.5 .157 - .315 4.0 - 8.0 0.630 16.0 0.669 17.0 0.276 0.906 -

MMS-20* M20x1.5 .236 - .472 6.0 - 12.0 0.787 20.0 0.866 22.0 0.315 0.957 UL

MMS-25* M25x1.5 .394 - .551 10.0 - 14.0 0.984 25.0 0.945 24.0 0.315 1.087 -

MMS-32 M32x1.5 .512 - .709 13.0 - 18.0 1.260 32.0 1.181 30.0 0.354 1.228 -

MMS-32C M32x1.5 .669 - .945 17.0 - 24.0 1.260 32.0 1.575 40.0 0.354 1.378 -

MMS-40* M40x1.5 .709 - .984 18.0 - 25.0 1.575 40.0 1.575 40.0 0.354 1.516 -

MMS-50 M50x1.5 .866 - 1.260 22.0 - 32.0 1.969 50.0 1.969 50.0 0.354 1.862 -

MMS-50C M50x1.5 1.142 - 1.575 29.0 - 40.0 1.969 50.0 2.520 64.0 0.354 1.929 -

MMS-63 M63x1.5 1.339 - 1.732 34.0 - 44.0 2.480 63.0 2.520 64.0 0.551 1.980 UL

MMS-63C M63x1.5 1.457 - 2.087 37.0 - 53.0 2.480 63.0 2.953 75.0 0.394 2.126 -

Metric with Long Thread†

MMS-12L M12x1.5 .118 - .256 3.0 - 6.5 0.472 12.0 0.551 14.0 0.472 0.846 -

MMS-16L* M16x1.5 .157 - .315 4.0 - 8.0 0.630 16.0 0.669 17.0 0.472 0.906 -

MMS-20L* M20x1.5 .236 - .472 6.0 - 12.0 0.787 20.0 0.866 22.0 0.472 0.957 -

MMS-25L* M25x1.5 .394 - .551 10.0 - 14.0 0.984 25.0 0.945 24.0 0.472 1.087 -

MMS-32L* M32x1.5 .512 - .709 13.0 - 18.0 1.260 32.0 1.181 30.0 0.591 1.228 -

MMS-40L* M40x1.5 .709 - .984 18.0 - 25.0 1.575 40.0 1.575 40.0 0.591 1.516 -

MMS-50L M50x1.5 .866 - 1.260 22.0 - 32.0 1.969 50.0 1.969 50.0 0.591 1.862 -

MMS-50CL M50x1.5 1.142 - 1.575 29.0 - 40.0 1.969 50.0 2.520 64.0 0.591 1.929 -

MMS-63L M63x1.5 1.339 - 1.732 34.0 - 44.0 2.480 63.0 2.520 64.0 0.709 1.980 -

MMS-63CL M63x1.5 1.457 - 2.087 37.0 - 53.0 2.480 63.0 2.953 75.0 0.709 2.126 -

CG 300 M SERIES METAL CABLE GLANDS

Metric thread

* 2nd Clamping Range Available

† Not currently VDE approved

Impact resistant, suitable for industrial applications, water tight, corrosion

resistant.



Clamping Insert Polyamide 6


O-Ring NBR





Approvals UR, UL

CG 300 P & N SERIES METAL CABLE GLANDS

PG & NPT thread



Thread Diameter (TD)

Wrenching Flats Cap (SW1)

Thread Length

Height (H)

UL ¹

Clamping Range Ø

(min-max)

inches mm inches mm inches mm inches inches

PG

MPS-7 PG 7 .118 - .256 3.0 - 6.5 0.492 12.5 0.551 14.0 0.236 0.858 -

MPS-9 PG 9 .157 - .315 4.0 - 8.0 0.598 15.2 0.669 17.0 0.236 0.890 -

MPS-11 PG 11 .197 - .394 5.0 - 10.0 0.732 18.6 0.787 20.0 0.236 0.996 -

MPS-13 PG 13.5 .236 - .472 6.0 - 12.0 0.803 20.4 0.866 22.0 0.256 0.949 -

MPS-16 PG 16 .394 - .551 10.0 - 14.0 0.886 22.5 0.945 24.0 0.256 1.083 -

MPS-21 PG 21 .512 - .709 13.0 - 18.0 1.114 28.3 1.181 30.0 0.283 1.228 -

MPS-29 PG 29 .709 - .984 18.0 - 25.0 1.457 37.0 1.575 40.0 0.315 1.547 -

MPS-36 PG 36 .866 - 1.260 22.0 - 32.0 1.850 47.0 1.969 50.0 0.354 1.858 -

MPS-42 PG 42 1.182 - 1.496 30.0 - 38.0 2.126 54.0 2.283 58.0 0.472 1.878 -

MPS-48 PG 48 1.339 - 1.732 34.0 - 44.0 2.335 59.3 2.520 64.0 0.551 2.047 -

PG with Long Thread

MPS-7L PG 7 .118 - .256 3.0 - 6.5 0.492 12.5 0.551 14.0 0.394 0.858 -

MPS-9L PG 9 .157 - .315 4.0 - 8.0 0.598 15.2 0.669 17.0 0.394 0.890 -

MPS-11L PG 11 .197 - .394 5.0 - 10.0 0.732 18.6 0.787 20.0 0.394 0.996 -

MPS-13L PG 13.5 .236 - .472 6.0 - 12.0 0.803 20.4 0.866 22.0 0.394 0.949 -

MPS-16L PG 16 .394 - .551 10.0 - 14.0 0.886 22.5 0.945 24.0 0.394 1.083 -

MPS-21L PG 21 .512 - .709 13.0 - 18.0 1.114 28.3 1.181 30.0 0.472 1.228 -

MPS-29L PG 29 .709 - .984 18.0 - 25.0 1.457 37.0 1.575 40.0 0.472 1.547 -

MPS-36L PG 36 .866 - 1.260 22.0 - 32.0 1.850 47.0 1.969 50.0 0.551 1.858 -

MPS-42L PG 42 1.182 - 1.496 30.0 - 38.0 2.126 54.0 2.283 58.0 0.630 1.878 -

MPS-48L PG 48 1.339 - 1.732 34.0 - 44.0 2.335 59.3 2.520 64.0 0.709 2.047 -

NPT

MNS-3/8 NPT 3/8 .157 - .315 4.0 - 8.0 0.629 16.0 0.787 20.0 0.452 0.905 UR

MNS-3/8C NPT 3/8 .197 - .394 5.0 - 10.0 0.629 16.0 0.787 20.0 0.452 0.944 -

MNS-1/2 NPT 1/2 .236 - .472 6.0 - 12.0 0.826 21.0 0.866 22.0 0.511 1.003 UL

MNS-1/2C NPT 1/2 .394 - .551 10.0 - 14.0 0.826 21.0 0.944 24.0 0.511 1.086 -

MNS-3/4 NPT 3/4 .512 - .709 13.0 - 18.0 1.141 29.0 1.181 30.0 0.511 1.338 -

MNS-1 NPT 1 .709 - .984 18.0 - 25.0 1.259 32.0 1.574 40.0 0.511 1.692 -

Impact resistant, suitable for industrial applications, water tight, corrosion

resistant.


Technical Data: Brass, Nickel Plated Material

ACCESSORIES

METAL LOCKNUTS: Metric, PG, & NPT thread



inches mm inches mm inches mm

Metric

LMM-12 M12x1.5 0.110 2.8 0.654 16.6 0.591 15.0

LMM-16 M16x1.5 0.118 3.0 0.827 21.0 0.748 19.0

LMM-20 M20x1.5 0.138 3.5 1.043 26.5 0.945 24.0

LMM-25 M25x1.5 0.157 4.0 1.299 33.0 1.181 30.0

LMM-32 M32x1.5 0.197 5.0 1.555 39.5 1.417 36.0

LMM-40 M40x1.5 0.197 5.0 2.008 51.0 1.811 46.0

LMM-50 M50x1.5 0.197 5.0 2.598 66.0 2.362 60.0

LMM-63 M63x1.5 0.236 6.0 3.031 77.0 2.756 70.0

LMM-72 M72x2.0 0.276 7.0 3.386 86.0 3.031 77.0

LMM-75 M75x2.0 0.276 7.0 3.528 89.6 3.150 80.0

LMM-80 M80x2.0 0.315 8.0 3.909 99.3 3.543 90.0

LMM-85 M85x2.0 0.315 8.0 4.181 106.2 3.740 95.0

LMM-90 M90x2.0 0.315 8.0 4.409 112.0 3.937 100.0

PG

LPM-7 PG 7 0.110 2.8 0.654 16.6 0.591 15.0

LPM-9 PG 9 0.110 2.8 0.787 20.0 0.709 18.0

LPM-11 PG 11 0.118 3.0 0.925 23.5 0.827 21.0

LPM-13 PG 13.5 0.118 3.0 1.004 25.5 0.906 23.0

LPM-16 PG 16 0.118 3.0 1.142 29.0 1.024 26.0

LPM-21 PG 21 0.138 3.5 1.398 35.5 1.260 32.0

LPM-29 PG 29 0.157 4.0 1.772 45.0 1.614 41.0

LPM-36 PG 36 0.197 5.0 2.205 56.0 2.008 51.0

LPM-42 PG 42 0.197 5.0 2.598 66.0 2.362 60.0

LPM-48 PG 48 0.217 5.5 2.776 70.5 2.520 64.0

NPT

LNM-3/8 NPT 3/8 0.197 5.0 0.965 24.5 0.866 22.0

LNM-1/2 NPT 1/2 0.197 5.0 1.181 30.0 1.063 27.0

LNM-3/4 NPT 3/4 0.197 5.0 1.437 36.5 1.299 33.0

LNM-1 NPT 1 0.197 5.0 1.831 46.5 1.693 43.0


EMC-2 CABLE GLANDS

Just tightening the cap of the gland will have three different effects: the cable will be centered in the middle of the gland, the neoprene sealing will guarantee the IP 68 protection and the design of the cap will give the appropriate strain relief. All is done by just one turn of the glands cap. Even uninstalling the cable is easy: by opening the gland’s cap you can pull off the cable together with the gland’s insert, which can then be removed easily.

The EMC Cable Gland combines several advantages in one product. First of all, you get the same clamping range as with the normal brass gland. The protection class is IP 68. In order to get a low impedance electrical contact between the body and the cable braiding the gland does not have to be opened. Next, the shielding for electromagnetical purposes will be perfect by just tightening the gland. This high tech gland consists of body plastic inlet, EMC spring and neoprene seal. It is delivered in a ready to use assembly.


CG EMC-2 M SERIES GROUNDING CABLE GLANDS

Metric thread


Clamping Range Ø

(min-max)

Shield Diameter

(Ø min)

Wrenching Flats Cap

(SW1)

Thread Diameter

(TD)

Thread Length

(TL) Height

(H)

inches mm inches mm inches mm mm mm mm

Metric

EM2-12 M12x1.5 .118 - .256 3.0 - 6.5 0.098 2.5 0.551 14.0 12.0 6.0 22.0

EM2-16 M16x1.5 .158 - .315 4.0 - 8.0 0.118 3.0 0.669 17.0 16.0 7.0 23.0

EM2-16C M16x1.5 .177 - .394 4.5 - 10.0 0.138 3.5 0.787 20.0 16.0 6.5 24.0

EM2-20 M20x1.5 .236 - .472 6.0 - 12.0 0.177 4.5 0.866 22.0 20.0 8.0 25.0

EM2-25 M25x1.5 .394 - .551 10.0 - 14.0 0.335 8.5 0.945 24.0 25.0 8.0 28.0

EM2-25C M25x1.5 .472 - .709 12.0 - 18.0 0.413 10.5 1.181 30.0 25.0 8.0 37.0

EM2-32 M32x1.5 .512 - .709 13.0 - 18.0 0.433 11.0 1.181 30.0 32.0 9.0 33.0

EM2-32C M32x1.5 .669 - .945 17.0 - 24.0 0.551 14.0 1.575 40.0 32.0 8.0 35.0

EM2-40 M40x1.5 .709 - .984 18.0 - 25.0 0.630 16.0 1.575 40.0 40.0 9.0 39.0

EM2-40C M40x1.5 .866 - 1.261 22.0 - 32.0 0.787 20.0 1.969 50.0 40.0 8.0 42.0

EM2-50 M50x1.5 .866 - 1.261 22.0 - 32.0 0.787 20.0 1.969 50.0 50.0 9.0 47.0

EM2-50C M50x1.5 1.181 - 1.496 30.0 - 38.0 1.024 26.0 2.244 57.0 50.0 9.0 49.0

EM2-63 M63x1.5 1.340 - 1.734 34.0 - 44.0 1.220 31.0 2.520 64.0 63.0 14.0 53.0

Metric with Long Thread

EM2-12L M12x1.5 .118 - .256 3.0 - 6.5 0.098 2.5 0.551 14.0 12.0 12.0 21.8

EM2-16L M16x1.5 .158 - .315 4.0 - 8.0 0.118 3.0 0.669 17.0 16.0 12.0 22.6

EM2-20L M20x1.5 .236 - .472 6.0 - 12.0 0.177 4.5 0.866 22.0 20.0 12.0 24.5

EM2-25L M25x1.5 .394 - .511 10.0 - 14.0 0.335 8.5 0.945 24.0 25.0 12.0 27.5

EM2-32L M32x1.5 .512 - .709 13.0 - 18.0 0.433 11.0 1.181 30.0 32.0 15.0 33.0

EM2-40L M40x1.5 .709 - .984 18.0 - 25.0 0.630 16.0 1.575 40.0 40.0 15.0 39.0

EM2-50L M50x1.5 .866 - 1.261 22.0 - 32.0 0.787 20.0 1.969 50.0 50.0 15.0 47.3

EM2-63L M63x1.5 1.340 - 1.734 34.0 - 44.0 1.220 31.0 2.520 64.0 63.0 18.0 52.2


Contact Spring Special Copper Alloy

Clamping Insert Polyamide 6 V2


O-Ring NBR




Flammability V2 (according to UL 94)

Optimal grounding of shielded cable, easy installation, water tight, impact resistant.


CG EMC-2 P & N SERIES GROUNDING CABLE GLANDS

PG & NPT thread





O-Ring NBR





Approvals UR, UL

¹Additional UL approvals in process (NPT only)

Part Number

Thread Size

Clamping Range Ø

(min-max)

Shield Diameter

(Ø min)

Thread Diameter

(TD)

Thread Length

(TL) Height

(H)

UL¹

Wrenching Flats

Cap (SW1)

inches mm inches mm inches mm mm mm mm

PG

EP2-7 PG 7 .118 - .256 3.0 - 6.5 0.098 2.5 0.551 14.0 12.5 6.0 21.8 -

EP2-9 PG 9 .157 - .315 4.0 - 8.0 0.118 3.0 0.669 17.0 15.2 6.0 22.6 -

EP2-11 PG 11 .197 - .394 5.0 - 10.0 0.157 4.0 0.787 20.0 18.6 6.0 25.3 -

EP2-13 PG 13.5 .236 - .473 6.0 - 12.0 0.197 5.0 0.866 22.0 20.4 6.5 24.1 -

EP2-16 PG 16 .394 - .551 10.0 - 14.0 0.335 8.5 0.945 24.0 22.5 6.5 27.5 -

EP2-21 PG 21 .512 - .709 13.0 - 18.0 0.433 11.0 1.181 30.0 28.3 7.2 31.2 -

EP2-29 PG 29 .709 - .984 18.0 - 25.0 0.630 16.0 1.575 40.0 37.0 8.0 39.3 -

EP2-36 PG 36 .866 - 1.260 22.0 - 32.0 0.787 20.0 1.969 50.0 47.0 9.0 47.2 -

EP2-42 PG 42 1.181 - 1.497 30.0 - 38.0 1.102 28.0 2.283 58.0 54.0 12.0 47.7 -

EP2-48 PG 48 1.339 - 1.732 34.0 - 44.0 1.220 31.0 2.520 64.0 59.3 14.0 52.0 -

PG with Long Thread

EP2-7L PG 7 .118 - .256 3.0 - 6.5 0.098 2.5 0.551 14.0 12.5 8.0 21.8 -

EP2-9L PG 9 .157 - .315 4.0 - 8.0 0.118 3.0 0.669 17.0 15.2 10.0 22.6 -

EP2-11L PG 11 .197 - .394 5.0 - 10.0 0.157 4.0 0.787 20.0 18.6 10.0 25.3 -

EP2-13L PG 13.5 .236 - .473 6.0 - 12.0 0.197 5.0 0.866 22.0 20.4 10.0 24.1 -

EP2-16L PG 16 .394 - .551 10.0 - 14.0 0.335 8.5 0.945 24.0 22.5 10.0 27.5 -

EP2-21L PG 21 .512 - .709 13.0 - 18.0 0.433 11.0 1.181 30.0 28.3 12.0 31.2 -

EP2-29L PG 29 .709 - .984 18.0 - 25.0 0.630 16.0 1.575 40.0 37.0 12.0 39.3 -

EP2-36L PG 36 .866 - 1.260 22.0 - 32.0 0.787 20.0 1.969 50.0 47.0 14.0 47.2 -

EP2-42L PG 42 1.181 - 1.497 30.0 - 38.0 1.102 28.0 2.283 58.0 54.0 16.0 47.7 -

EP2-48L PG 48 1.339 - 1.732 34.0 - 44.0 1.220 31.0 2.520 64.0 59.3 18.0 52.0 -

NPT

EN2-3/8 NPT 3/8 .196 - .394 5.0 - 10.0 0.157 4.0 0.787 20.0 17.0 11.5 40.5 UR

EN2-1/2 NPT 1/2 .236 - .472 6.0 - 12.0 0.196 5.0 0.866 22.0 21.0 13.0 38.3 UL

EN2-3/4 NPT 3/4 .512 - .709 13.0 - 16.0 0.433 11.0 1.181 30.0 26.0 13.0 47.4 -

EN2-1 NPT 1 .709 - .984 18.0 - 25.0 0.629 16.0 1.574 40.0 33.0 13.0 55.2 -

Optimal grounding of shielded cable, easy installation, water tight,

impact resistant.


CG EMC-4 SERIES GROUNDING CABLE GLANDS

(Intro)

These cable glands are developed according to end users’ requirements.

Their features can be summarized as follows:

Easy Insertion of the cable from the two sides of the gland

Open contact fingers in loose position

Free radial and axial movement of the cable

Easy radial and axial movement of the cable, even in contact position without any damage to the

braid with the help of rounded contact finger surfaces

Large contact surfaces of the fingers allow low contact resistance even on loosely woven cable

braids (the contact surfaces do not sink into the braided wires)

High contact performance even under vibrating conditions with help of the reduced A2 distance

between the

“sealing

clamping level”

and “EMC

contact level”






O-Ring NBR


Temperature Range

-20°C to +100°C permanent



Approvals UR, UL

CG EMC-4 SERIES GROUNDING CABLE GLANDS

Metric, PG & NPT thread


Part Number

Thread Size

Clamping Range Ø

(min - max)

Shield Diameter

(Ø min - max)

Wrenching

Flats Cap (SW1)

Thread Dia. (TD)

Thread Length

(TL) Height

(H)

UL¹ inches mm inches mm inches mm mm mm mm

Metric

EM4-12 M12x1.5 .118 - .256 3.0 - 6.5 .079 - .197 2.0 - 5.0 0.551 14.0 12.0 6.0 28.0 UR

EM4-16 M16x1.5 .197 - .394 5.0 - 10.0 .138 - 315 3.5 - 8.0 0.787 20.0 16.0 6.0 34.0 UR

EM4-20C M20x1.5 .236 - .472 6.0 - 12.0 .177 - .394 4.5 - 10.0 0.866 22.0 20.0 6.0 32.0 -

EM4-20 M20x1.5 .295 - .551 7.5 - 14.0 .217 - 453 5.5 - 11.5 0.945 24.0 20.0 8.0 38.0 UR

EM4-25 M25x1.5 .394 - .709 10.0 - 18.0 .276 - .551 7.0 - 14.0 1.181 30.0 25.0 8.0 42.0 UR

EM4-32 M32x1.5 .630 - .984 16.0 - 25.0 .472 - .787 12.0 - 20.0 1.575 40.0 32.0 9.0 50.0 UL

EM4-40 M40x1.5 .866 - 1.260 22.0 - 32.0 .709 - 1.063 18.0 - 27.0 1.969 50.0 40.0 9.0 57.0 UL

EM4-50 M50x1.5 1.181 - 1.496 30.0 - 38.0 1.024 - 1.339 26.0 - 34.0 2.283 58.0 50.0 9.0 67.0 UL

EM4-63 M63x1.5 1.339 - 1.732 34.0 - 44.0 1.181 - 1.575 30.0 - 40.0 2.520 64.0 63.0 14.0 69.0 UL

EM4-63C M63x1.5 1.457 - 2.087 37.0 - 53.0 1.299 - 1.929 33.0 - 49.0 2.953 75.0 63.0 10.0 72.0 -

PG

EP4-7 PG 7 .118 - .256 3.0 - 6.5 .079 - .197 2.0 - 5.0 0.551 14.0 12.5 6.0 22.0 -

EP4-9 PG 9 .157 - .315 4.0 - 8.0 .118 - .157 3.0 - 4.0 0.669 17.0 15.2 6.0 23.0 -

EP4-11 PG 11 .197 - .394 5.0 - 10.0 .138 - .315 3.5 - 8.0 0.787 20.0 18.6 6.0 28.0 -

EP4-13 PG 13.5 .236 - .472 6.0 - 12.0 .177 - .394 4.5 - 10.0 0.866 22.0 20.4 6.0 26.0 -

EP4-16 PG 16 .295 - .551 7.5 - 14.0 .217 - .453 5.5 - 11.5 0.945 24.0 22.5 8.0 30.0 -

EP4-21 PG 21 .394 - .709 10.0 - 18.0 .276 - .551 7.0 - 14.0 1.181 30.0 28.3 8.0 34.0 -

EP4-29 PG 29 .630 - .984 16.0 - 25.0 .472 - .787 12.0 - 20.0 1.575 40.0 37.0 9.0 41.0 -

EP4-36 PG 36 .866 - 1.260 22.0 - 32.0 .709 - 1.063 18.0 - 27.0 1.969 50.0 47.0 9.0 48.0 -

EP4-42 PG 42 1.181 - 1.496 30.0 - 38.0 1.024 - 1.339 26.0 - 34.0 2.283 58.0 54.0 9.0 49.0 -

EP4-48 PG 48 1.339 - 1.732 34.0 - 44.0 1.181 - 1.575 30.0 - 40.0 2.520 64.0 59.3 14.0 52.0 -

NPT

EN4-1/4 NPT 1/4 .118 - .256 3.0 - 6.5 .079 - .197 2.0 - 5.0 0.551 14.0 13.7 6.0 28.0 -

EN4-3/8 NPT 3/8 .197 - .394 5.0 - 10.0 .138 - 315 3.5 - 8.0 0.787 20.0 17.1 6.0 34.0 -

EN4-1/2C NPT 1/2 .236 - .472 6.0 - 12.0 .177 - .394 4.5 - 10.0 0.866 22.0 21.3 8.0 32.0 -

EN4-1/2 NPT 1/2 .295 - .551 7.5 - 14.0 .217 - 453 5.5 - 11.5 0.945 24.0 21.3 8.0 38.0 -

EN4-3/4 NPT 3/4 .394 - .709 10.0 - 18.0 .276 - .551 7.0 - 14.0 1.181 30.0 26.7 8.0 42.0 -

EN4-1 NPT 1 .630 - .984 16.0 - 25.0 .472 - .787 12.0 - 20.0 1.575 40.0 33.4 9.0 50.0 -

EN4-1 1/4 NPT 1 1/4 .866 - 1.260 22.0 - 32.0 .709 - 1.063 18.0 - 27.0 1.969 50.0 42.2 9.0 57.0 -

EN4-1 1/2 NPT 1 1/2 1.181 - 1.496 30.0 - 38.0 1.024 - 1.339 26.0 - 34.0 2.283 58.0 48.3 9.0 67.0 -

EN4-2 NPT 2 1.339 - 1.732 34.0 - 44.0 1.181 - 1.575 30.0 - 40.0 2.519 68.0 60.3 14.0 69.0 -

Optimal grounding of shielded cable, bidirectional cable

installation, impact resistant.


ACCESSORIES

EMC LOCKNUTS: Metric & PG thread



Height (H) Diameter Wrenching Flats

inches mm inches mm inches mm

Metric

LME-12 M12x1.5 0.130 3.3 0.654 16.6 0.591 15.0

LME-16 M16x1.5 0.138 3.5 0.827 21.0 0.748 19.0

LME-20 M20x1.5 0.138 3.5 1.043 26.5 0.945 24.0

LME-25 M25x1.5 0.138 3.5 1.299 33.0 1.181 30.0

LME-32 M32x1.5 0.157 4.0 1.555 39.5 1.417 36.0

LME-40 M40x1.5 0.181 4.6 2.008 51.0 1.811 46.0

LME-50 M50x1.5 0.220 5.6 2.598 66.0 2.362 60.0

LME-63 M63x1.5 0.264 6.7 3.031 77.0 2.756 70.0

PG

LPE-7 PG 7 0.130 3.3 0.654 16.6 0.591 15.0

LPE-9 PG 9 0.130 3.3 0.787 20.0 0.709 18.0

LPE-11 PG 11 0.138 3.5 0.925 23.5 0.827 21.0

LPE-13 PG 13.5 0.138 3.5 1.004 25.5 0.906 23.0

LPE-16 PG 16 0.138 3.5 1.142 29.0 1.024 26.0

LPE-21 PG 21 0.157 4.0 1.398 35.5 1.260 32.0

LPE-29 PG 29 0.181 4.6 1.772 45.0 1.614 41.0

LPE-36 PG 36 0.220 5.6 2.205 56.0 2.008 51.0

LPE-42 PG 42 0.220 5.6 2.598 66.0 2.362 60.0

LPE-48 PG 48 0.240 6.1 2.776 70.5 2.520 64.0

Locknut with grounding teeth to make connection to metal panels or control boxes.

Old P/N New P/N Old P/N New P/N Old P/N New P/N Old P/N New P/N

BM-0S PMG-12 BSR-04 PPG-13R BISP-01L FMG-16RL BNSPA-21 FNB-3/8BM-01 PMG-16 BSR-05 PPG-16R BISP-02 FMG-20R BNSPB-22 FNB-1/2BM-01L PMG-16L BSR-06 PPG-21R BISP-02L FMG-20RL BNSPC-22 FNB-1/2CBM-02 PMG-20 BSR-07 PPG-29R BISP-03 FMG-20R BNSPD-23 FNB-3/4BM-02L PMG-20L BSR-08 PPG-36R BISP-05 FMG-25R BNSPA-21R FNB-3/8RBM-03 PMG-20C BSR-09 PPG-42R BISP-04 FMG-20RCL BNSPB-22R FNB-1/2RBM-04 PMG-20CL BSR-10 PPG-48R BISP-06 FMG-25R BNSPC-22R FNB-1/2RCBM-05 PMG-25 BNSPD-23R FNB-3/4RBM-06 PMG-25L BS-21 PPB-7 BMSP-2S FMB-12BM-07 PMG-32 BS-22 PPB-9 BMSP-21 FMB-16 BML-0S LMG-12BM-08 PMG-40 BS-23 PPB-11 BMSP-21L FMB-16L BML-01 LMG-16BM-09 PMG-50 BS-24 PPB-13 BMSP-22 FMB-20 BML-02 LMG-20BM-10 PMG-63 BS-25 PPB-16 BMSP-22L FMB-20L BML-03 LMG-25BI-0S PMG-12R BS-26 PPB-21 BMSP-23 FMB-20 BML-04 LMG-32BI-01 PMG-16R BS-27 PPB-29 BMSP-24 FMB-20CL BML-05 LMG-40BI-01L PMG-16RL BS-28 PPB-36 BMSP-25 FMB-25 BML-06 LMG-50BI-02 PMG-20R BS-29 PPB-42 BMSP-26 FMB-25 BML-07 LMG-63BI-02L PMG-20RL BS-30 PPB-48 BISP-2S FMB-12RBI-03 PMG-20RC BSR-21 PPB-7R BISP-21 FMB-16R BML-2S LMB-12BI-04 PMG-20RCL BSR-22 PPB-9R BISP-21L FMB-16RL BML-21 LMB-16BI-05 PMG-25R BSR-23 PPB-11R BISP-22 FMB-20R BML-22 LMB-20BI-06 PMG-25RL BSR-24 PPB-13R BISP-22L FMB-20RL BML-23 LMB-25BI-07 PMG-32R BSR-25 PPB-16R BISP-23 FMB-20R BML-24 LMB-32BI-08 PMG-40R BSR-26 PPB-21R BISP-24 FMB-20RCL BML-25 LMB-40BI-09 PMG-50R BSR-27 PPB-29R BISP-25 FMB-25R BML-26 LMB-50BI-10 PMG-63R BSR-28 PPB-36R BISP-26 FMB-25R BML-27 LMB-63

BSR-29 PPB-42RBM-2S PMB-12 BSR-30 PPB-48R BSSP-01 FPG-7 BL-01 LPG-7BM-21 PMB-16 BSSP-02 FPG-9 BL-02 LPG-9BM-21L PMB-16L BSPA-01 PNB-3/8 BSSP-03 FPG-11 BL-03 LPG-11BM-22 PMB-20 BSPB-02 PNB-1/2 BSSP-04 FPG-13 BL-04 LPG-13BM-23 PMB-20C BSPC-02 PNB-1/2C BSSP-05 FPG-16 BL-05 LPG-16BM-24 PMB-20CL BSPD-03 PNB-3/4 BSSP-06 FPG-21 BL-06 LPG-21BM-25 PMB-25 BSP-04 PNB-1 BSRP-01 FPG-7R BL-07 LPG-29BM-26 PMB-25L BSPA-01R PNB-3/8R BSRP-02 FPG-9R BL-08 LPG-36BM-27 PMB-32 BSPB-02R PNB-1/2R BSRP-03 FPG-11R BL-09 LPG-42BM-28 PMB-40 BSPC-02R PNB-1/2RC BSRP-04 FPG-13R BL-10 LPG-48BM-29 PMB-50 BSPD-03R PNB-3/4R BSRP-05 FPG-16RBM-30 PMB-63 BSP-04R PNB-1R BSRP-06 FPG-21R BL-21 LPB-7BI-2S PMB-12R BL-22 LPB-9BI-21 PMB-16R BSPA-21 PNB-3/8 BSSP-21 FPB-7 BL-23 LPB-11BI-21L PMB-16RL BSPB-22 PNB-1/2 BSSP-22 FPB-9 BL-24 LPB-13BI-22 PMB-20R BSPC-22 PNB-1/2C BSSP-23 FPB-11 BL-25 LPB-16BI-22L PMB-20RL BSPD-23 PNB-3/4 BSSP-24 FPB-13 BL-26 LPB-21BI-23 PMB-20RC BSP-24 PNB-1 BSSP-25 FPB-16 BL-27 LPB-29BI-24 PMB-20RCL BSPA-21R PNB-3/8R BSSP-26 FPB-21 BL-28 LPB-36BI-25 PMB-25R BSPB-22R PNB-1/2R BSRP-21 FPB-7R BL-29 LPB-42BI-26 PMB-25RL BSPC-22R PNB-1/2RC BSRP-22 FPB-9R BL-30 LPB-48BI-27 PMB-32R BSPD-23R PNB-3/4R BSRP-23 FPB-11RBI-28 PMB-40R BSP-24R PNB-1R BSRP-24 FPB-13R BPL-04 LNG-1BI-29 PMB-50R BSRP-25 FPB-16R BPL-02 LNG-1/2BI-30 PMB-63R BMSP-0S FMG-12 BSRP-26 FPB-21R BPL-03 LNG-3/4

BMSP-01 FMG-16 BPL-01 LNG-3/8BS-01 PPG-7 BMSP-01L FMG-16L BNSPA-01 FNG-3/8BS-02 PPG-9 BMSP-02 FMG-20 BNSPB-02 FNG-1/2 BPL-24 LNB-1BS-03 PPG-11 BMSP-02L FMG-20L BNSPC-02 FNG-1/2C BPL-22 LNB-1/2BS-04 PPG-13 BMSP-03 FMG-20 BNSPD-03 FNG-3/4 BPL-23 LNB-3/4BS-05 PPG-16 BMSP-04 FMG-20CL BNSPA-01R FNG-3/8R BPL-21 LNB-3/8BS-06 PPG-21 BMSP-05 FMG-25 BNSPB-02R FNG-1/2RBS-07 PPG-29 BMSP-06 FMG-25 BNSPC-02R FNG-1/2RCBS-08 PPG-36 BISP-0S FMG-12R BNSPD-03R FNG-3/4RBS-09 PPG-42 BISP-01 FMG-16RBS-10 PPG-48BSR-01 PPG-7RBSR-02 PPG-9RBSR-03 PPG-11R

Flex Metric Gray

Dome PG GrayLocknut NPT Gray

Flex NPT Gray

Flex PG Black

Dome NPT Gray

Dome Metric Black Locknut PG Gray

Locknut PG Black

Locknut NPT Gray

Dome NPT Black

Dome PG Black Flex Metric BlackLocknut Metric Gray

Locknut Metric Black

Flex PG Gray

SAB Polyamide Cord Grip (Strain Reliefs) Cross Reference

Dome Metric Gray Dome PG Gray Flex Metric Gray Flex NPT Black

Old P/N New P/N Old P/N New P/N Old P/N New P/N Old P/N New P/N

BMBC-0S MMS-12 BMEM-04S EM2-32C BNEM-ES (NPT1/4"T) EN4-1/4 BMHFX-01 HMF-16BMBC-01S MMS-16C BMEM-04 EM2-32 BNEM-E1 (NPT3/8"T) EN4-3/8 BMHFX-02 HMF-20BMBC-01 MMS-16 BMEM-05S EM2-40C BNEM-E2S (NPT1/2"T) EN4-1/2C BMHFX-03 HMF-25BMBC-02S MMS-20C BMEM-05 EM2-40 BNEM-E2 (NPT1/2"T) EN4-1/2 BMHFX-04 HMF-32BMBC-02 MMS-20 BMEM-06S EM2-50C BNEM-E3 (NPT3/4"T) EN4-3/4 BMHFX-05 HMF-40BMBC-03S MMS-25C BMEM-06 EM2-50 BNEM-E4 (NPT1"T) EN4-1BMBC-03 MMS-25 BMEM-07 EM2-63 BNEM-E5 (NPT1 1/4"T) EN4-1 1/4 BMFGX-0S HMG-12BMBC-04S MMS-32C BMEN-0S EM2-12L BNEM-E6 (NPT1 1/2"T) EN4-1 1/2 BMFGX-01 HMG-16BMBC-04 MMS-32 BMEN-01 EM2-16L BNEM-E7 (NPT2"T) EN4-2 BMFGX-02 HMG-20BMBC-05S MMS-40C BMEN-02 EM2-20L BMFGX-03 HMG-25BMBC-05 MMS-40 BMEN-03 EM2-25L BMBL-01 LMM-12 BMEFGX-01 HME-16BMBC-06S MMS-50C BMEN-04 EM2-32L BMBL-02 LMM-16 BMEFGX-02 HME-20BMBC-06 MMS-50 BMEN-05 EM2-40L BMBL-03 LMM-20 BMEFGX-03 HME-25BMBC-07S MMS-63C BMEN-06 EM2-50L BMBL-04 LMM-25BMBC-07 MMS-63 BMEN-07 EM2-63L BMBL-05 LMM-32 BMBS-0S HPR-17BMBE-0S MMS-12L BMBL-06 LMM-40 BMBS-01 HPR-18BMBE-01S MMS-16CL BSEM-01 EP2-7 BMBL-07 LMM-50 BMBS-02 HPR-19BMBE-01 MMS-16L BSEM-02 EP2-9 BMBL-08 LMM-63 BMBS-03 HPR-20BMBE-02S MMS-20CL BSEM-03 EP2-11 BMBL-09 LMM-72 BMBS-04 HPR-21BMBE-02 MMS-20L BSEM-04 EP2-13 BMBL-10 LMM-75 BMBS-05 HPR-22BMBE-03S MMS-25CL BSEM-05 EP2-16 BMBL-11 LMM-80 BMBS-06 HPR-23BMBE-03 MMS-25L BSEM-06 EP2-21 BMBL-12 LMM-85 BMBS-07 HPR-24BMBE-04S MMS-32CL BSEM-07 EP2-29 BMBL-13 LMM-90 BMBS-2S HPR-25BMBE-04 MMS-32L BSEM-08 EP2-36 BMBS-21 HPR-26BMBE-05S MMS-40CL BSEM-09 EP2-42 BSL-01 LPM-7 BMBS-22 HPR-27BMBE-05 MMS-40L BSEM-10 EP2-48 BSL-02 LPM-9 BMBS-23 HPR-28BMBE-06S MMS-50CL BSEN-01 EP2-7L BSL-03 LPM-11 BMBS-24 HPR-29BMBE-06 MMS-50L BSEN-02 EP2-9L BSL-04 LPM-13 BMBS-25 HPR-30BMBE-07 MMS-63L BSEN-03 EP2-11L BSL-05 LPM-16 BMBS-26 HPR-31BMBE-07S MMS-63CL BSEN-04 EP2-13L BSL-06 LPM-21 BMBS-27 HPR-32

BSEN-05 EP2-16L BSL-07 LPM-29BSBC-01 MPS-7 BSEN-06 EP2-21L BSL-08 LPM-36 BBS-01 HPR-01BSBC-02 MPS-9 BSEN-07 EP2-29L BSL-09 LPM-42 BBS-02 HPR-02BSBC-03 MPS-11 BSEN-08 EP2-36L BSL-10 LPM-48 BBS-03 HPR-03BSBC-04 MPS-13 BSEN-09 EP2-42L BBS-04 HPR-04BSBC-05 MPS-16 BSEN-10 EP2-48L BPFL-01 LNM-3/8 BBS-05 HPR-05BSBC-06 MPS-21 BPFL-02 LNM-1/2 BBS-06 HPR-06BSBC-07 MPS-29 BNEM-04 EN2-1 BPFL-03 LNM-3/4 BBS-07 HPR-07BSBC-08 MPS-36 BNEM-02 EN2-1/2 BPFL-04 LNM-1 BBS-08 HPR-08BSBC-09 MPS-42 BNEM-03 EN2-3/4 BBS-21 HPR-09BSBC-10 MPS-48 BNEM-01 EN2-3/8 BMEL-01 LME-12 BBS-22 HPR-10BSBE-01 MPS-7L BMEL-02 LME-16 BBS-23 HPR-11BSBE-02 MPS-9L BMEM-ES (M12T) EM4-12 BMEL-03 LME-20 BBS-24 HPR-12BSBE-03 MPS-11L BMEM-E1 (M16T) EM4-16 BMEL-04 LME-25 BBS-25 HPR-13BSBE-04 MPS-13L BMEM-E2S (M20T) EM4-20C BMEL-05 LME-32 BBS-26 HPR-14BSBE-05 MPS-16L BMEM-E2 (M20T) EM4-20 BMEL-06 LME-40 BBS-27 HPR-15BSBE-06 MPS-21L BMEM-E3 (M25T) EM4-25 BMEL-07 LME-50 BBS-28 HPR-16BSBE-07 MPS-29L BMEM-E4 (M32T) EM4-32 BMEL-08 LME-63BSBE-08 MPS-36L BMEM-E5 (M40T) EM4-40BSBE-09 MPS-42L BMEM-E6 (M50T) EM4-50 BSEL-01 LPE-7BSBE-10 MPS-48L BMEM-E7 (M63T) EM4-63 BSEL-02 LPE-9

BMEM-E7L (M63T) EM4-63C BSEL-03 LPE-11BNBC-01 MNS-3/8 BSEL-04 LPE-13BNBC-01S MNS-3/8C BSEM-E1 (Pg7T) EP4-7 BSEL-05 LPE-16BNBC-02 MNS-1/2 BSEM-E2 (Pg9T) EP4-9 BSEL-06 LPE-21BNBC-02S MNS-1/2C BSEM-E3 (Pg11T) EP4-11 BSEL-07 LPE-29BNBC-03 MNS-3/4 BSEM-E4 (Pg13,5T) EP4-13 BSEL-08 LPE-36BNBC-04 MNS-1 BSEM-E5 (Pg16T) EP4-16 BSEL-09 LPE-42

BSEM-E6 (Pg21T) EP4-21 BSEL-10 LPE-48BMEM-0S EM2-12 BSEM-E7 (Pg29T) EP4-29BMEM-01S EM2-16C BSEM-E8 (Pg36T) EP4-36BMEM-01 EM2-16 BSEM-E9 (Pg42T) EP4-42BMEM-02 EM2-20 BSEM-E0 (Pg48T) EP4-48BMEM-03S EM2-25CBMEM-03 EM2-25

Blind Stop PG gray/black

EMC-2 Grounding Metric

EMC-4 Grounding PG

Locknut EMC PG

Locknut EMC Metric

Locknut Metal NPT

Call SAB Sales for new P/N

Metal Metric Standard EMC-2 Grounding Metric EMC-4 Grounding NPT Hygienic Conduit Fitting Metric

Hygienic Gland Metric

Locknut Metal Metric

EMC-2 Grounding PG

Metal PG Standard

EMC-2 Grounding NPT

EMC-4 Grounding Metric

Locknut Metal PG

Blind Stop Metric gray/black

Multi-hole sealsCall SAB Sales for new P/N

Metal NPT Standard

Flat seals

SAB Metal Cord Grip (Strain Reliefs) Cross Reference

new part numbers for cord grips - allied electronics · new part numbers for cord grips sab north...

Documents