new durafon-sip long-range cordless phone system · •the durafon-sip system has an rj45 ethernet...

New DuraFon-SIP™ Long-Range

Cordless Phone System

Presented by Walter Navarro

16/2/2015

Agenda

• What is DuraFon SIP?

• What are the key features & value proposition?

• How DuraFon-SIP is similar and different to the DuraFon 1x and PRO.

• DuraFon-SIP System applications

DuraFon-SIP Webinar Agenda

6/2/2015 2

• Uses for RJ11 PSTN line port

• Base Station & Antenna

• Go over a list of questions asked about DuraFon-SIP

• Drawing for Amazon Gift Card

• Q & A

What is DuraFon-SIP™?

36/2/2015

Key Features & Value Proposition

46/2/2015

DuraFon-SIP Long Range Key Features

6/2/2015 5

DuraFon-SIP Long Range Key FeaturesDuraFon-SIP Value

6/2/2015 6

DuraFon-SIP Long Range Key FeaturesDuraFon-SIP Value

6/2/2015 7DuraFon SIP Video: https://youtu.be/JmTOh_yGK_0

How is DuraFon-SIP Similar & Different

to DuraFon 1x & DuraFon PRO?

86/2/2015

to DuraFon 1x & DuraFon PRO?


• The DuraFon-SIP handset has the same rugged design as the existing 1x and PRO handsets – therefore it has the same durability DuraFon is well

known for.

• The DuraFon-SIP handset and base station use the same 900MHz FHSS

technology as the DuraFon 1x and PRO systems - therefore it has the same

long range performance DuraFon is well known for.

DuraFon-SIP Similarities to DuraFon-1x & PRO.

6/2/2015 9

long range performance DuraFon is well known for.

• Handset to Base intercom like the DuraFon1x system.

• Base supports up to 4 concurrent talk paths (like DuraFon-PRO).


• The DuraFon-SIP system has an RJ45 Ethernet port for LAN

connectivity. Up to 10 SIP accounts can be registered.

• The DuraFon-SIP system supports up to 10 handsets.

• (1x = 9, PRO = 90).

DuraFon-SIP Differences from DuraFon-1x & PRO.

6/2/2015 10

• (1x = 9, PRO = 90).

• The DuraFon-SIP is a single base system.

• The DuraFon-SIP is a network device and has a GUI.

DuraFon-SIP System Applications

116/2/2015

DuraFon-SIP Long Range Key FeaturesMarkets and Typical Range For DuraFon

12 floors12 floors 3,000 acres3,000 acres250,000 square feet

6/2/2015 12

• Retail & Grocery Stores

• Warehouses & Distribution

• Convention Centers

• Manufacturing Plants

• Sanitation Plants

• Offices

• Assisted Living

• Hotels & Resorts

• Schools and Libraries

• Oil Rigs

• Water Treatment Plants

• Recycling Centers

• Truck & Equip. Rental

Centers

• Farms & Ranches

• Self Storage

• Marinas/Harbors/Ports

• Auto Rental and Sales

• Sports Parks

• Golf & Country Clubs

• Small Airports

• Military Bases

And anywhere 2-way radios are used

DuraFon-SIP Long Range Key FeaturesWhy EnGenius Cordless Solutions?

• Durability• DuraFon handsets have been drop tested over 50 times @ 6’ onto concrete.

• Easy Setup and Installation• Easy to configure and set up.

• Single Cell of coverage - No need to worry about QOS, Roaming, hand-off, and

coverage overlap between access points as with WiFi or other multi-cell

6/2/2015 13

coverage overlap between access points as with WiFi or other multi-cell

technology (DECT).

• Verifying coverage is quick and easy.

• No QoS Concerns / on it’’’’s own frequency• Does not share network resources or have to share frequency space with WiFi

networks by using its own private and secure 900MHz frequency.

• No Annual Contracts• EnGenius products deliver secure Long Range wireless communications

without airtime charges or other reoccurring fees.

Two-Way Broadcast (PTT) and HS to HS Intercom

Maximum 10 Handsets per Base.

HS to other handset communication does not use

the base station.

HS to HS 2-way radio or intercom

Same 900MHz FHSS secure wireless as telephone mode

Private 2-way calling reduces radio chatter and does not use talk paths on

base station

HS to Base 2-way radio or intercom

Push-2-Talk

Two-Way Intercom2-way radio to ALL (including base station if desired)

2-way radio to a group (max. 6 groups)

14


• The DuraFon-SIP system has an RJ45 Ethernet port for LAN

connectivity. Up to 10 SIP accounts can be registered.

• The DuraFon-SIP system supports up to 10 handsets.

� Handsets register as handset ID 10-19.

• The DuraFon-SIP is a single base system.� More than (1) one base can be used but inter-base handset to

handset communications can occur via SIP to SIP extension calling.

DuraFon-SIP Technical Aspects

6/2/2015 15

handset communications can occur via SIP to SIP extension calling.

• The base supports up to (4) four concurrent calls.

� The 1x is (1) and the PRO is also (4) four.


• (1) RJ45 Ethernet Port

• (1) RJ11 PSTN analog Port

DuraFon-SIP Interface - Ethernet and (1) RJ11 (FXO)

6/2/2015 16


• The DuraFon-SIP is a LAN device like any other wired SIP phone.

Therefore the SIP server can reside locally, on the cloud, or be

connected to a service provider.

DuraFon-SIP Connectivity

6/2/2015 17

Uses for RJ11 PSTN Line Port

186/2/2015


• The RJ11 port can serve as a secondary fail over (back-up) connection

directly to a central office PSTN line.

DuraFon-SIP PSTN Line Use Options

6/2/2015 19


• Connect the RJ11 Port to an Entry Controller


6/2/2015 20


• Connect the RJ11 Port to a Call Box


6/2/2015 21


• Connect the RJ11 Port to a Ring Down.


6/2/2015 22


• Connect the RJ11 Port to Access an Overhead Paging System


6/2/2015 23

Base Placement & Antenna Options

246/2/2015

• 30 feet or more separation between bases is suggested for best performance to reduce self-interference

30 feet or more apart required

Base Station and Antenna Placement

6/2/2015 25




• Part# SN-UL-AK20L-IND

• External indoor antenna kit that is designed specifically for indoor use.

• Comes with same 20 meters (66 feet approx.) LMR400 coax.

• Same price as SN-ULTRA-AK20L

• Keep base units in the phone closet

Optional Antenna Options – Indoor Antenna

6/2/2015 26

• Keep base units in the phone closet without compromising signal.

- 100

- 95

- 90

- 85

- 80

- 75

- 70

- 65

- 60

- 55

- 50

1 2 3 4 5 6 7

AK10

A2CM9

Test Point

RS

SI

Comparison of A2CM9 & AK10 (on FreeStyl 1)


• Part number: SN-ULTRA-AK20L

• An external antenna kit can increase range substantially, especially outdoors & when multiple building coverage is required.

• This antenna allows you keep the base unit inside the building while having the

Optional Antenna Options – Outdoor Antenna

6/2/2015 27

• This antenna allows you keep the base unit inside the building while having the antenna up and out to an ideal spot for best coverage.

• Kit comes with 20m (66feet) LMR-400 low loss coax and 6dBi antenna.

• The majority of range improvements seen by this antenna are that by having an antenna in a better location, it reducing the average number of obstructions between the handset and base (than from the dBi gain difference compared to the standard dipole antenna).

Drawing

AMAZON GIFT CARD GIVE AWAY

286/2/2015

Q & A

296/2/2015

Total Networking Solution Provider

THANK YOU!!

EMAIL: [email protected]

6/2/2015 30

Appendix

316/2/2015

DuraFon-SIP

Frequently Asked Questions

326/2/2015

Frequently Asked Questions


DuraFon-SIP FAQ’’’’s

Q1: What is the default IP address, user name, and password?

A1: IP Address: 192.168.1.156, User Name: admin, Password: admin

Q2: What bundles/packages are available?

A2: System (Handset and Base), Handset only kits, and Base only.

Q3: Can a DuraFon Pro Handset work with a DuraFon SIP Base Station?

A3: No, it cannot and a DuraFon SIP Handset will not work on a DuraFon PRO

system either.

6/2/2015 33

system either.

Q4: Is the DuraFon SIP a multi-base system?

A4: No. Even though more than one base can be used, keep in mind, 2-Way

Intercom and “Push-to-Talk” features would not work across Handsets registered to different bases. Bases will also need to be > 30 feet apart to avoid

self-interference.

Q5: Is a repeater base available as an option for DuraFon SIP?

A5: No.



Q6: Does the DuraFon SIP support TAP and text messaging?

A6: No.

Q7: Can a Handset receive a phone call during a 2-Way Intercom call

conversation?

A7: No. It is important to note; no missed call notification will occur either. For

this reason, SIP-to-SIP calling from one handset to the other is the preferred

method.

6/2/2015 34

Q8: Are there DuraWalkie Handsets available to go along with the DuraFon

SIP System?

A8: No.

Q9: Is the DuraFon SIP field firmware upgradable?

A9: Base Stations can be, but Handsets cannot.

Q10: Is there a log file of call activity and history?

A10: No.



Q11: What is the maximum number of Handsets that can be registered to

the system?

A11: 10.

Q12: From the Base Station GUI, can you monitor or see if calls are in

progress?

A12: No.

Q13: What frequency does the DuraFon SIP use?

6/2/2015 35

Q13: What frequency does the DuraFon SIP use?

A13: 900MHz ISM band (FHSS 902-928MHz).

Q14: Will the DuraFon SIP work with Wi-Fi and is it a Wi-Fi phone?

A14: No. It uses its own 900MHz frequency and only works with its own

matching Base Station.



Q15: What is the main advantage in using the DuraFon SIP verses a standard

DuraFon system?

A15: It does not need analog ports.

1. It can plug in anywhere there is network connectivity. There is no need to run

RJ11’s from the IDF/MDF. 2. It has intercom/broadcast at the Base Station (like DuraFon 1x) (PRO does not).

3. Both DuraFon PRO and DuraFon SIP support a maximum of 4-talk paths, but

unlike PRO, 10 unique DN (ext. numbers) can be associated to the Base (with

PRO, only 4 via 4 separate RJ11 connections).

6/2/2015 36

PRO, only 4 via 4 separate RJ11 connections).

4. The DuraFon SIP System is a network device with a unique IP address and can

be remotely managed.

5. The Base Station is field firmware upgradable.

6. Its GUI supports easy access to advanced audio adjustment parameters and

configuration files can be saved.

Q16: Will the DuraFon SIP interfere with Wi-Fi networks?

A16: No. Wi-Fi uses 2.4GHz and 5GHz, while the DuraFon SIP uses 900MHz.

However, it is always recommended to keep the DuraFon system at least 3-feet

away from any other electronics.



Q17: How many simultaneous calls can a Handset manage?

A17: Two.

1. To answer a second incoming SIP call from a different SIP extension

(grouping): Press the “Switch” soft key. 2. To answer a second incoming call coming from the PSTN line: Press the

“Switch” soft key. 3. To answer a second incoming call from a SIP extension while on a PSTN line

call: Press the “Switch” soft key. 4. To answer a second incoming call from the same SIP extension, where call is

6/2/2015 37

4. To answer a second incoming call from the same SIP extension, where call is

coming from the PBX call waiting feature: Press the “TALK/Flash” key to answer and press the “Switch” soft key to switch between the two calls (v1.05).

Q18: Can one Handset have more than one SIP account associated to it?

A18: No. Each Handset ID has its own SIP account, but you can utilize grouping

to access more than one extension.

Q19: What VoIP codecs are supported?

A19: G.729 (v1.05), G.711a and G.711u



Q20: Does the DuraFon SIP Handset support line appearances?

A20: No.

Q21: What’’’’s the maximum SIP account password character length?

A21: 32 characters (F/W v1.05)

Q22: If two DuraFon SIP Handsets (associated with different DuraFon SIP

Base Stations) were used behind the same PBX, can one Handset call

another?

6/2/2015 38

another?

A22: Yes. You can call via internal PBX extension-to-extension calling. You cannot

however, 2-Way Intercom or Broadcast to the other Handset registered to a

different DuraFon SIP Base.

Q23: What is the system’’’’s range? A23: 12-floors (in-building), 250,000 sq. ft. (warehouse), 3,000 acres (open area).



Q24: Can the DuraFon SIP Handset conference calls?

A24:

Device Caller 2 Caller 3 Capable

DuraFon SIP DuraFon SIP Outside line YES

DuraFon SIP PBX Desk-set Outside line YES

DuraFon SIP Outside line Outside line YES

DuraFon SIP DuraFon SIP DuraFon SIP YES

DuraFon SIP DuraFon SIP DuraFon-PSTN YES

Q25: What is the typical talk and standby time?

6/2/2015 39

Q25: What is the typical talk and standby time?

A25: Typical talk time is 4-5 hours with standby up to 50 hours.

Q26: How do you change the settings so it automatically selects the SIP line

when dialing out?

A26: Note: Use the “up/down arrow” soft key to scroll: Press “Menu,” “4. Call Settings,” “3. Call Manager,” “Enter” Password: “0000” then press soft key “OK,” 2”. Outgoing,” then you can set it using 3 options: 1. Auto, 2. Manual, 3. Off.

1. Auto = will automatically choose the open line, either SIP or PSTN.

2. Manual = user will choose the outbound port.

3. Off = disable all outbound calls.



Q27: How many groups does the DuraFon SIP support?

A27: 7. Groups allow a Handset to receive/make inbound calls from different SIP

extensions (share). The maximum concurrent number of calls a handset can do is

two (2).

Q28: Is the DuraFon SIP Base Station PoE (Power-over-Ethernet) capable?

A28: No.

Q29: What is the Handset password?

A29: The default Handset password is 0000.

6/2/2015 40

A29: The default Handset password is 0000.

Q30: How can I find out the IP address of the DuraFon SIP Base Station?

A30: From any registered handset: Press “Menu ####*”, scroll up/down to BS HW/SW Version and press: “select,” now scroll up/ down until you get to the IP address screen.

new durafon-sip long-range cordless phone system · •the durafon-sip system has an rj45 ethernet...

Documents