category 6 rj45 solution - clipsalupdates.clipsal.com/clipsalonline/files/brochures/w...category 6...

Clipsal titanium® Patch Cord

Clipsal titanium® LSZH Patch Cord

Clipsal titanium® Modular Jacks

Clipsal titanium® Keystone Jacks

Clipsal titanium® Shuttered Modular Jacks

Clipsal titanium® Shuttered Keystone

Clipsal titanium® Patch Panels

Clipsal titanium® Shuttered Patch Panels

Clipsal titanium® Fully Featured Patch Panel

Patch Panel Labelling

Clipsal titanium® C2000 Series Wall Plates

Clipsal titanium® Cable

Clipsal titanium® Cable Management - Deep

Clipsal Side Rings

MUTOs

Surface Mount Blocks

CATEGORY 6

RJ45 SOLUTION

44

Category 6 RJ45 Solution

The Clipsal titanium® Category 6 solution provides the customer with a great value proposition. The system is

designed to operate up to 250Mhz, and off ers a solution for horizontal cabling, as well as backbone cabling where

required. The product utilises lead frame technology, which delivers reliability above other PCB product.

This solution includes cable, patch panels, patch cables, modular jacks as well as faceplates and cable

management. It off ers Class E performance, and excellent headroom as indicated in the specifi cations.

The product is UL Listed, and certifi cates are available on request. The Clipsal Lifetime Warranty is available

upon application.

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | INTRODUCTION

45

Clipsal titanium® Category 6 Patch Cords

The Clipsal titanium® Series Category 6 Patch Cord is a superior product delivering the best network performance

when used in conjunction with other Clipsal Series Category 6 products.

The patch cord is constructed of high grade cable and quality RJ45 plugs, and is designed to operate up to 250MHz.

This enables it to operate successfully in a Category 6 environment.

T R A N S M I S S I O N S P E C I F I C A T I O N S

Parameter Value (-dB) Category 6 (-dB)

NEXT 55.1 ≥54.0

Power Sum NEXT 52.0 ≥54.0

FEXT 49.8 ≥43.1

Power Sum FEXT 46.9 ≥40.1

Attenuation 0.1 ≤0.2

Return Loss 27.0 ≥23.0

M E C H A N I C A L C H A R A C T E R I S I C S

Cable

Gauge (AWG) 23 AWG with PE insulation, CMR fi re rated

Pair Count 4 Pair individually colour coded with fi ller

and PVC jacket

Sequence Wiring sequence 568 A

Durability 1000 mating cycles

RJ45 Plug Polycarbonate, FCC Part68 Subpart F, UL 94V-0

Plug Boot PVC

Contact Material Phosphor bronze with 50 micro-inches gold over

100 micro-inches nickel

E L E C T R I C A L

Dielectric Strength 1000 V RMS at 60 Hz for 1 minute

Voltage Rating 150V a.c. maximum

Current Rating 1.5 A maximum

Insulation 500MΩ minimum

Contact Resistance 10MΩ maximum

L I N E D R A W I N G

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | PATCH CORDS

CATALOGUE NUMBER DESCRIPTION

RJ6A8/05PL (XX) Clipsal titanium® Category 6 Modular Patch Cord, 0.5m

RJ6A8/10PL (XX) Clipsal titanium® Category 6 Modular Patch Cord, 1m

RJ6A8/15PL (XX) Clipsal titanium® Category 6 Modular Patch Cord, 1.5m




(XX) for colour: (BK) Black, (BU) Blue, (GR) Green, (RD) Red, (WE) White, (GY) Grey, (YL) Yellow

P R O D U C T F E A T U R E S

Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 • Edition 2 2002 and ANSI/TIA/EIA-568-B Series Connecting Hardware Standards.

UL CMR fi re rated jacketing.•

PE insulation on conductors.•

PVC outer jacket material.•

Available in multiple lengths.•

Backward compatible with Category 5e products.•

Strain relief boot.•

Snag free design.•

C U S T O M E R B E N E F I T S

Standards compliant.•

Comes in various lengths to assist with better • cable management.

RJ6A8/05PL, BU

SNAG FREE

BEND RADIUS

SLIM DESIGN FOR USE IN HIGH DENSITY PATCHING

46

Clipsal titanium® Category 6 Patch CordsLow Smoke Zero HalogenThe Clipsal titanium® Series Category 6 Patch Cord is a superior product delivering the best network performance

when used in conjunction with other Clipsal Series Category 6 products.

The patch cord is constructed of high grade cable and quality RJ45 plugs, and is designed to operate up to 250MHz.

This enables it to operate successfully in a Category 6 environment.

Clipsal Datacomms has released a range of PVC free, Low Smoke Zero Halogen (LSZH) Category 6 LAN cable and

patch cords. The LSZH sheath is composed of thermoplastic and thermoset compounds that are PVC free, emit

limited smoke and zero halogens (poisonous gases) when exposed to high sources of heat or fi re.

Clipsal titanium® 4 Pair LSZH Category 6 LAN cable and patch cords are superior products delivering excellent

network performance and a "greener" peace of mind. More LSZH and RoHS products are being used as networks

move toward a greener workplace and environment.

T R A N S M I S S I O N S P E C I F I C A T I O N S

Parameter Value (-dB) Category 6 (-dB)

NEXT 55.1 ≥54.0

Power Sum NEXT 52.0 ≥54.0

FEXT 49.8 ≥43.1

Power Sum FEXT 46.9 ≥40.1

Attenuation 0.1 ≤0.2

Return Loss 27.0 ≥23.0

M E C H A N I C A L C H A R A C T E R I S T I C S

Cable

Gauge (AWG) 23 AWG

Pair Count 4-Pair individually colour coded with filler and LSZH Jacket

Sequence Wiring sequence T568 A

Durability 1,000 mating cycles

RJ45 Plug Polycarbonate, FCC Part 68 subpart F, UL 94V-0

Plug Boot LSZH

Contact Material Phosphor bronze with 50 micro-inches gold

over 100 micro-inches nickel

E L E C T R I C A L S P E C I F I C A T I O N S

Dielectric Strength 100V RMS at 60Hz for 1 minute

Voltage Rating 150V a.c. maximum


Insulation 500MΩ minimum

Contact Resistance 10MΩ maximum

L I N E D R A W I N G

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | PATCH CORDS



LSZH fi re rated jacket.•

PE insulation on conductors.•

PVC outer jacket material.•

Backward compatible with Category 5 and 5e products.•

Sheath complies to IEC60332-3C(HF3).•

Strain relief boot.•

Snag free design.•


Performs beyond the latest Category 6 • International Standards.

Comes in various lengths to assist with improved • cable management.

RJ6A8/10LPL, BU

N E D R A W I N G

SNAG FREE

BEND RADIUS

SLIM DESIGN FOR USE IN HIGH DENSITY PATCHING


RJ6A8/10LPL (XX) Clipsal titanium® Category 6 LSZH Modular Patch Cord, 1.0m




(XX) for colour: (BU) Blue

47

Clipsal titanium® Category 6 Jacks Modular - Suits Clipsal Wall Plates

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | JACKS


30RJ88SMA6 (XX) Category 6 Modular Jack 30-Mech - Suits Clipsal Wall Plates

(XX) for colour: (WE) White, (BK) Black, (BU) Blue, (RD) Red, (SG) Soft Grey, (GR) Green, (YL) Yellow

30RJ88SMA6




Flexible locking tabs.•

Compatible with Clipsal titanium 110 tool.•

UL 94V-O rated.•

Accepts solid 22-24 AWG diameter conductors.•

Universal colour-coding for 568A and 568B Standards. •

Lead frame technology eliminates the possibility of • PCB failures.


Various colours for easier circuit identifi cation.•

Can be used in multi-user telecommunication outlets.•

Flexible locking tabs allow for easy removal from • wall plates.

Clear IDC caps that allow for termination verifi cation • and assist in cable retention.

C

A

B

The Clipsal titanium® range of products are the next generation of data communications solutions. Lead frame

technology eliminates possible PC board failures, improves consistency in performance and exactly matches the

work area outlets. These modular jacks are colour coded for both 568A and 568B standards and can be terminated

using a Clipsal 110 Tool, which is recommended. Clear wire retaining caps are supplied and can be used to provide

additional cable strain relief.

D I M E N S I O N S

Product A B C

30RJ88SMA6 23mm 23mm 35mm

C O L O U R A V A I L A B I L I T Y

E L E C T R I C A L C H A R A C T E R I S T I C S

Dielectric Strength 1,000V RMS at 60Hz for 1 minute


Insulation Resistance 200MΩ minimum

Contact Resistance 1MΩ per contact

Temperature Range -40˚C to +70˚C

Transmission Performance ISO/IEC 11801 Class E

AS/NZS 3080:2003 Class E


Modular Connector

RJ45 8-Pin Connector FCC part 68, Subpart F and

IEC 60603-7 compliant

Durability 750 insertion cycles minimum

Material Phosphor bronze with 50 micro- inches of gold over 100

micro-inches nickel plating

IDC Connector

IDC Connector Suitable insulation of 22 to 24 AWG

(0.64 to 0.41mm)

Insulation Diameter (Wire) 0.70 - 1.60mm

Connector Material Phosphor bronze with nickel plating

IDC Body and Cover Material Fire-retardant UL 94V-0, Plastic

White (WE) Black (BK) Blue (BU) Red (RD) Soft Grey (SG) Green (GR)

Yellow (YL)

48



RJ88SMA6 (XX) Category 6 Modular Jack Keystone

(XX) for colour: (WE) White, (BK) Black, (BU) Blue, (RD) Red, (SG) Soft Grey, (GR) Green, (YL) Yellow

Clipsal titanium® Category 6 Jacks Keystone

RJ88SMA6


Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 • 2002 and ANSI/TIA/EIA-568-B Series Connecting Hardware Standards.


Compatible with Clipsal titanium® 110 Tool.•

UL 94V-O rated.•






Can be used in multi-user telecommunication outlet • applications (MUTO).


A

B


technology eliminates possible PC board failures and improves consistency in performance. These modular jacks

are colour coded for both 568A and 568B standards and can be terminated using a Clipsal 110 Tool, which is

recommended. Clear wire retaining caps are supplied and can be used to provide additional cable strain relief.

D I M E N S I O N S

Product A B C

3RJ88SMA6 23mm 15mm 36mm











Modular Connector




Material Phosphor bronze with 50 micro- inches of gold over

100 micro-inches nickel plating

IDC Connector


(0.64 to 0.41mm)



IDC Body and Cover Material Fire-retardant UL 94V-0, plastic

C

White (WE) Black (BK) Blue (BU) Yellow (YL) Red (RD) Soft Grey (SG)

Green (GR)

49




Flexible locking tabs.•

Compatible with Clipsal titanium® 110 tool.•

UL 94V-O rated.•






Can be used in multi-user telecommunication outlet • applications (MUTO).

Flexible locking tabs allow for easy removal from • wall plates.


IP22 Rated.•

Prevents dust ingress.•

Protects against • insect infestation.

Deters foreign • object insertion.


technology eliminates possible PC board failures, improves consistency in performance and exactly matches the

work area outlets. These modular jacks are colour coded for both 568A and 568B standards and can be terminated

using a Clipsal 110 Tool, which is recommended. Clear wire retaining caps are supplied and can be used to provide

additional cable strain relief.

D I M E N S I O N S

Product A B C

30RJ88SMA6SH 23mm 23mm 35mm











Modular Connector




Material Phosphor bronze with 50 micro inches of gold over 100

micro-inches nickel plating

IDC Connector

IDC Connector Suitable insulation of 22 to 24 AWG (0.64 to 0.41mm)


Durability 10 insertions of any combination of wire gauge

- two wires per slot



Clipsal titanium® Category 6 JacksShuttered Modular - Suits Clipsal Wall Plates



30RJ88SMA6SH (XX) Category 6 Shuttered Modular Jack 30-Mech - Suits all Clipsal Wall Plates

(XX) for colour: (WE) White, (BK) Black, (BU) Blue, (RD) Red, (SG) Soft Grey, (GR) Green, (YL) Yellow, (GB) Battleship Grey

30RJ88SMA6SH

C

A

B

White (WE) Black (BK) Blue (BU) Red (RD) Soft Grey (SG) Green (GR)

Yellow (YL) Battleship Grey(GB)

50

Clipsal titanium® Category 6 JacksShuttered Keystone



RJ88SMA6SH (XX) Category 6 Shuttered Modular Jack Keystone

(XX) for colour: (WE) White, (BK) Black, (BU) Blue, (YL) Yellow, (RD) Red, (SG) Soft Grey, (GR) Green

RJ88SMA6SH


Clipsal’s patented fl ush-faced zero footprint • shutter mechanism.

Fully compliant to AS/NZS 3080:2003, ISO/• IEC 118012002 and ANSI/TIA/EIA-568-B Series Connecting Hardware Standards.


Compatible with Clipsal titanium® 110 tool.•

UL 94V-O rated.•


Patent shutter.•




Performs beyond Category 6 Standards.•

Shutter mechanism is easy to operate, simply insert • the plug lead into the jack.

Protection from dust ingress, insect infestation and the • insertion of foreign objects.


For use in multi-user telecommunication outlet • applications (MUTO).


IP22 Rated.•




A

B


technology eliminates possible PC board failures and improves consistency in performance. These modular jacks

are colour coded for both 568A and 568B standards and can be terminated using a Clipsal 110 Tool, which is

recommended. Clear wire retaining caps are supplied and can be used to provide additional cable strain relief.

D I M E N S I O N S

Product A B C

RJ88SMA6SH 23mm 15mm 36mm











Modular Connector




Material Phosphor bronze with 50 micro- inches of gold over


IDC Connector


(0.64 to 0.41mm)




C

White (WE) Black (BK) Blue (BU) Yellow (YL) Red (RD) Soft Grey (SG)

Green (GR)

51

Clipsal titanium® Category 6 Patch Panels16 & 24 PortThe Clipsal titanium® range of patch panels feature individual Category 6 jacks that are colour coded for both 568A

and 568B Standards and can be terminated using a Clipsal 110 Tool (recommended).

Each patch panel is supplied with rear cable management tray, velcro cable ties, cage nuts and screws.










Modular Connector

RJ45 8-Pin Connector FCC part 68, Subpart F and IEC 60603-7 compliant


Material Phosphor bronze with 50 micro inches of gold over


IDC Connector

IDC Connector Suitable Insulation of 22 to 24 AWG (0.64 to 0.41mm)


Durability 10 insertions of any combination of wire gauge -

two wires per slot


IDC Body and Cover Material Fire-retardant, UL 94V-0, plastic

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | PATCH PANELS


RJ6A1/16PP Category 6, 16 Port Patch Panel

RJ6A1/24PP Category 6, 24 Port Patch Panel


Lead frame technology eliminates the possibility of PC • Board failures.

Powder coated metal framework.•

Universal colour coding for 568A and 568B Standards.•

Removable rear cable management tray.•

Compatible with standard 19” equipment frames.•

IDC termination using Clipsal 110 Tool.•


Individual removable jack.•


Complete with all mounting and cable fi xing hardware.•


Category 6 performance.•

Rear cable management tray is supplied loose, • allowing the installer to fi t after termination.

The front labelling system provides a clear and effi cient • means of identifying circuits.

Powder coated metal frame is robust and protects the • patch panel from corrosion and scratching.

RJ6A1/16PP

RJ6A1/24PP

52

Clipsal titanium® Category 6 Patch Panels16 & 24 Port ShutteredThe Clipsal titanium® range of shuttered patch panels feature individual shuttered Category 6 jacks that are colour

coded for both 568A and 568B Standards and can be terminated using a Clipsal 110 Tool (recommended).

Each patch panel is supplied with rear cable management tray, velcro cable ties, cage nuts and screws.










Modular Connector





IDC Connector




two wires per slot



CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | PATCH PANEL SHUTTERED


Shuttered outlets/ports.•

Lead frame technology eliminates the possibility of PC • Board failures.










Outlet shutters protect the contact pins from dust/• insect ingress and the insertion of foreign objects.

Category 6 performance.•


The front labelling system provides a clear and effi cient • means of identifying circuits.


IP22 Rated.•




RJ6A1/16PPSH

RJ6A1/24PPSH


RJ6A1/16PPSH Category 6, 16 Port Shuttered Patch Panel

RJ6A1/24PPSH Category 6, 24 Port Shuttered Patch Panel

53

Clipsal titanium® Category 6 Patch Panel24 Port Fully Featured

The 24 individual Category 6 keystone modular jacks incorporate Clipsal’s patented fl ush faced, zero footprint

design eliminating possible PC board failures, improving consistency in performance, and exactly matching the

work area outlets. This product incorporates channel designation dials with icons for the top and colours for the

bottom of each outlet. It also features hinged label windows (top and bottom) allowing for further identifi cation of

each channel designation.

Each patch panel is supplied with rear cable management tray, velcro cable ties, cage nuts and screws. The colour/

icon channel designation dials are rotated using a screwdriver.










Modular Connector





IDC Connector




two wires per slot

Connector Material Phosphorbronze with nickel plating


CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | PATCH PANEL FULLY FEATURED


31071U24KPPI Category 6 24 Port Fully Featured Patch Panel


Shuttered outlets/ports.•

Top (icon) and bottom (colour) designated dials.•

Top and bottom hinged label windows for • additional identifi cation.










Outlet shutters protect the contact pins from dust/• insect ingress and the insertion of foreign objects.

Channel designation dials and hinged windows • provide an extensive level of designation identifi cation.



IP22 Rated.•




31071U24KPPICage nut end caps give the installed unit a clean, contemporary style.

Channel Designation (Icon) Dials are an effective means of identifying the purpose of the circuit.

Clipsal’s Patented Shuttered Jack. Providing protection for the contact pins with a flush-faced appearance.

Channel Designation (Colour) Dials are an additional means of distinguishing circuits within the network.

Hinged label windows (top and bottom) provide trouble-free access to the Channel Designation Labels.

54

Patch Panel Labels

To complement the range of Clipsal titanium® Patch Panels, Clipsal Datacomms have introduced label window

stickers. This value-added product has been designed specifi cally for a Clipsal titanium® Patch Panels in

the portfolio:

RJ6A1/16PP•

RJ6A1/24PP•

RJ6A1/16PPSH•

RJ6A1/24PPSH.•

Each pack contains ten A4 label sheets, fi ve with small numbers on the left hand side (1 – 144) and fi ve sheets

with blank labels. There are 18 labels per sheet and each window label accommodates one block of eight data

outlets. The stickers are fi nished in silver to match the front fascia of the patch panels. Most inkjet and laser printers

will print on these labels.

Customers can download the printing software from clipsal.com, simply type in http://www.clipsal.com/label

to take you to the product page and link to the software. The instructions found on the web page provide handy

hints in formatting, printing and adhering the identifi cation stickers.

The Clipsal titanium® Patch Panel Window Label Stickers provide a professional fi nishing touch to any structured

cabling system.

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | LABELS


RJ5/6CTWLS Patch Panel Window Label Stickers (10 Pack) to suit Clipsal titanium® Patch Panels

RJ5/6CTWLS

55

Clipsal titanium® C2000 Series Wall Plates

The Clipsal titanium® C2000 Flexiport Wall Plates are supplied with Clipsal titanium® Category 6 Jacks. All Clipsal

titanium® C2000 Flexiport Wall Plates come standard with designation labelling behind a clear removable window,

and come with a sheet of commonly used icons.

I D E N T I F I C A T I O N I C O N S

Identifi cation is accomplished with an icon sheet preprinted with symbols or with text labels.

D I M E N S I O N S

Product Height Width

Grid Plate Only 68mm 110mm

Grid Plate with Surround 76mm 116mm

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | WALL PLATES


C2031HRJA6S,WE 1 Gang Category 6 RJ45 Wall Plate with Channel and Circuit ID slot

C2032HRJA6S,WE 2 Gang Category 6 RJ45 Wall Plate with Channel and Circuit ID slot

C2031HRJA6S,WE

Labelling


Grid plate comes with standard white • colour surrounds.

Protected clear designation label windows.•

Supplied complete with mounting screws.•


Complete with all mounting and fi xing hardware.•

The front labelling system provides a clear and effi cient • means of identifying outlets.

Flame retardant polycarbonate material with a fi nely • polished fi nish for extra durability.

56

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | CABLE


2D4P6IPV3B (XX) Clipsal titanium® Category 6, 4-Pair Cable, 24AWG, 305m

(XX) for colour: (BU) Blue, (GY) Grey, (YL) Yellow, (BK) Black, (GR) Green, (RD) Red

Clipsal titanium® 4-Pair Category 6 Cable is a superior product delivering excellent network performance when

used in conjunction with other Clipsal titanium® Category 6 products.

The Category 6 cable consists of 4 Pairs of solid insulated copper 23 AWG (0.57mm) and is UL listed with a CM fi re

rating. It is designed for use in horizontal cabling situations and supplied in 305m (1,000ft) easy pull out boxes.

The Category 6 cable provides a signifi cant margin (10 dB) above the minimum Category 6 near end crosstalk

(NEXT) requirement of TIA/EIA 568-B.2-1, ISO/IEC 11801 and AS/NZS 30801:2003 Class E.

P H Y S I C A L S P E C I F I C A T I O N S

Rated Temperature (˚C) 75

Product Standard Certifi cation UL File E215065

Flammability Test CM

Application Horizontal wiring in LAN

Reference Standard UL Subject 444, EIA/TIA568 & ISO/IEC 11801, IEC61156-5

Comply to RoHS Yes

C O N S T R U C T I O N

Conductor Solid bare copper (annealed)

Gauge (AWG) 23

Conductor Dia. Nom. (mm) 0.57

Insulation HDPE

Average Thickness (mm) 0.22

Min. Point Thickness (mm) 0.18

Insulation Diameter (±0.10mm) ± 0.10

Twisting Lay Length (mm) P1:10±0.5, P2:17±0.5, P3:11±0.5, P4:13±0.5

Cabling Lay Length (mm) 135±5

Filler PE

Jacket PVC

Average Thickness (±0.05mm) 0.58


Outer Diameter (±0.2mm) 6.10

Rip Cord YES


Test Object Jacket

Test Material PVC

Before Tensile Strength (Mpa) ≥13.8

Aging Elongation (%) ≥100

Aging Condition (˚C x hrs) 100 ˚C x 240 hrs

After Tensile Strength (Mpa) ≥85% of original

Aging Elongation (%) ≥50% of original

Cold Bend (-20 ± 2˚C x 4hrs) No crack

Bend Radius (mm) 76

Clipsal titanium® Category 6 Cable


Frequency

(MHz)

Return

Loss

(dB)

Attenuation

(dB/100m)

ACR

(dB)

Delay

(ns/100m)

1 20.0 2.0 72.3 570.0

4 23.0 3.8 61.5 /

8 24.50 5.3 55.5 /

10 25.0 6.0 53.3 545.0

16 25.0 7.6 48.6 /

20 25.0 8.5 46.3 /

25 24.3 9.5 43.8 /

31.25 23.6 10.7 41.2 /

62.5 21.5 15.4 32.0 /

100 20.1 19.8 24.5 538.0

200 18.0 29.0 10.8 /

250 17.3 32.8 5.5 536.0

Frequency(MHz)

NEXT(dB)

PSNEXT(dB)

ELFEXT(dB/100m)

PSELFEXT(dB/100m)

1 74.3 72.3 67.8 64.8

4 65.3 63.3 55.8 52.8

8 60.8 58.8 49.7 46.7

10 59.3 57.3 47.8 44.8

16 56.2 54.2 43.7 40.7

20 54.8 52.8 41.8 38.8

25 53.3 51.3 39.8 36.8

31.25 51.9 49.9 37.9 34.9

62.5 47.4 45.4 31.9 28.9

100 44.3 42.3 27.8 24.8

200 39.8 37.8 21.8 18.8

250 38.3 36.3 19.8 16.8

1.0-100.0MHz Input Impedance (Ohms) 100 ± 15

100-250MHz Input Impedance (Ohms) 100 ± 22

1.0-250.0MHz Delay Skew (ns/100m) ≤45

Pair-to-Ground Capacitance Unbalance (pF/100m) ≤330

Max. Conductor DC Resistance 20˚C

(Ohms/km)73.2

Resistance Unbalance (%) ≤5

Nominal Velocity of Propagation (NVP,%) 69

2D4P6IPV3B,BU

Jacket

Conductor

Insulation

Filler

Rip Cord

57

Clipsal titanium® Category 6 Cable Low Smoke Zero HalogenClipsal titanium® 4-Pair Category 6 Cable is a superior product delivering excellent network performance when

used in conjunction with other Clipsal titanium® Category 6 products.

The Category 6 cable consists of 4 Pairs of solid insulated copper 23 AWG (0.57mm) and is UL listed with a CM fi re

rating. It is designed for use in horizontal cabling situations and supplied in 305m (1,000ft) easy pull out boxes.

The Category 6 cable provides a signifi cant margin (10 dB) above the minimum Category 6 near end crosstalk

(NEXT) requirement of TIA/EIA 568-B.2-1, ISO/IEC 11801 and AS/NZS 30801:2003 Class E.

P H Y S I C A L S P E C I F I C A T I O N S

Rated Temperature (˚C) 75

Product Standard Certifi cation UL File E215065

Flammability Test CM

Application Horizontal wiring in LAN

Reference Standard UL Subject 444, EIA/TIA568 & ISO/IEC 11801, IEC61156-5,

IEC60332-3C(HF3)

Comply to RoHS Standard Yes

C O N S T R U C T I O N

Conductor Annealed bare copper

Gauge (AWG) 23

Conductor Dia. Nom. (mm) 0.57

Insulation HDPE

Average Thickness (mm) 0.22


Insulation Diameter (±0.10mm) 1

Twisting Lay Length (mm) P1:10±0.5, P2:17±0.5

P3:11±0.5 P4:13±0.5

see Pair colour coding for detail

Cabling Lay Length (mm) 135±5

Filler PE

Jacket LSZH

Average Thickness (±0.05mm) 0.58


Outer Diameter (±0.2mm) 6.10

Rip Cord YES


Test Object Jacket

Test Material LSZH

Before Tensile Strength (Mpa) ≥8.3

Aging Elongation (%) ≥100

Aging Condition (˚C x hrs) 100 ˚C x 48 hrs

After Tensile Strength (Mpa) ≥75% of original

Aging Elongation (%) ≥75% of original

Cold Bend (-20 ± 2˚C x 4hrs) No crack

Bend Radius 76

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | CABLE


2D4P6ILS3B Clipsal titanium® Category 6, Low Smoke Zero Halogen, 4-Pair Cable, 23AWG, 305m

Colours: (BU) Blue only


Frequency(MHz)

Attenuation (dB/100m)

Return Loss(dB)

ACR(dB)

Delay(ns)

1 2.0 20.0 72.3 570.0

4 3.8 23.0 61.5 /

8 5.3 24.50 55.5 /

10 6.0 25.0 53.3 545.0

16 7.6 25.0 48.6 /

20 8.5 25.0 46.3 /

25 9.5 24.3 46.3 /

31.25 10.7 23.6 41.2 /

62.5 15.4 21.5 32.0 /

100 19.8 20.1 24.5 538.0

200 29.0 18.0 10.8 /

250 32.8 17.3 5.5 536.0

Frequency(MHz)

PSNEXT(dB)

ELFEXT(dB/100m)

PSELFEXT(dB/100m)

Delay

1 74.3 72.3 67.8 64.8

4 65.3 63.3 55.8 52.8

8 60.8 58.8 49.7 46.7

10 59.3 57.3 47.8 44.8

16 56.2 54.2 43.7 40.7

20 54.8 52.8 41.8 38.8

25 53.3 51.3 39.8 36.8

31.25 51.9 49.9 37.9 34.9

62.5 47.4 45.4 31.9 28.9

100 44.3 42.3 27.8 24.8

200 39.8 37.8 21.8 18.8

250 38.3 36.3 19.8 16.8

1.0-100.0MHz Input Impedance (Ohms) 100+/-15

100-250MHz Input Impedance (Ohms) 100+/-22

200-250MHz Input Impedance (Ohms) 100+/-32

1.0-250.0MHz Delay Skew (ns/100m) ≥45

Pair-to-Ground Capacitance Unbalance (pF/100m) ≥330

Max. Conductor DC Resistance 20˚C (Ohms/km) 73.2

Resistance Unbalance (%) ≥5

Nominal Velocity of Propagation (NVP,%) 69

2D4P6ILS3B,BU

Jacket

Conductor

Insulation

Filler

Rip Cord

58

Clipsal titanium® Cable Management PanelDeep

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | CABLE MANAGEMENT


RJ1UCMPC 1RU Clipsal titanium® Cable Management Panel, Deep

The Clipsal titanium® Cable Management Panel is a 1 rack unit (1RU) item designed for use in 19” rack

environments, managing patch cords that are connected between patch panels and/or active switches. The product

is recommended for mounting between every second row of patch panels/active switches.

The unique clips provide a quick and simple means of installing the panel in the rack or cabinet. Each of the four

cable management rings have been reinforced to accommodate the capacity for up to 50 patch cords. The rings

have been designed to facilitate easy insertion and removal of the patch leads, necessary in dynamic environments

where moves and changes are required.

D I M E N S I O N S

Product A B C

RJ1UCMPC 44mm 482mm 100mm


Clip on cover (patented).•

Rack mount clips eliminate the need for cage nuts • and screws.

Reinforced cable management rings can accommodate • up to 50 patch cords.

Cavities behind each ring provide additional space for • cable slack.

Additional depth on cable rings ensures compliance • with minimum bend radius requirements.

Complements Clipsal titanium® patch panel styling.•

100mm cable ring depth.•


Quick product installation using rack mount clips.•

Clipsal titanium® styling

Rack clips for easy mounting

Reinforced cable rings

Capacity for 50 patch cords

RJ1UCMPC

B

C

A

RJ1UCMPC

59


RJ1HUSSR 1RU Shallow Side Ring

RJ1HUDSR 1RU Deep Side Ring

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | CABLE MANAGEMENT

Clipsal Side Rings

The side rings are typically used in frames or cabinets to provide vertical patch ccord management. These rings

have several features that make them stand out. The “ring and lock” design utilises proven plastic hinge technology

to guide patch cords. These rings have unique teeth locks that are easy to open and snap back to lock tight again

should you need to open the rings.

The rings can be mounted with patch panels or directly onto the vertical panel mounts (VPM) of the equipment frame.


Test Object Jacket

Ring Material Polypropylene, Graphite Grey

D I M E N S I O N S

Product Height Width Depth

RJ1HUSSR 42mm 43mm 65mm

RJ1HUDSR 42mm 43mm 130mm

RJ1HUSSR


Graphite Grey.•

Teeth locks that provide easy access and security for • patch cords.

Available in 1RU deep and shallow versions.•


The key benefi t is the “ring and lock” design which not • only makes the loading and unloading of patch cords or cables easier but also secures them in place, keeping the cabinet neat and uncluttered. This makes circuit identifi cation and administration for the customer far more effi cient.

The two rings’ depths enable the customer to manage • the cabinet or rack better depending on the amount of patch cords being used.

RJ1HUDSR

60

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | MUTOS

MUTOs

M U L T I U S E R T E L E C O M M U N I C A T I O N S O U T L E T S ( M U T O )

Clipsal provides a range of MUTO options, which are ideal in situations where a number of terminals are required in

the one area.

Floor outlet housings can also be used in desktop applications where up to 12 services are required, and fi t all

standard Clipsal face plates.

All Clipsal 2000 Series Wall Plates will fi t into the housing and surrounds of the MUTO's.


224/1 Floor Outlet Housing for two Standard Plates. Can be used on desktops

224/2 Floor Outlet Housing for four Standard Plates. Can be used on desktops

2000/2 Two Gang Flush Surround, Curved Sides. Suits all 2000 Series grids

2000/3 Three Gang Flush Surround, Curved Sides. Suits all 2000 Series grids

2000/4 Four Gang Flush Surround, Curved Sides. Suits all 2000 Series grids

2000H2 Horizontal Two Gang Flush Surround, Curved Sides. Suits all 2000 Series grids

2000H4 Horizontal Four Gang Flush Surround, Curved Sides. Suits all 2000 Series grids

2000H2

224/1

2000/3

Loaded 224/1 Floor Outlet

Loaded Faceplate

61

Surface Mount Blocks

The Clipsal Surface Mount Blocks are suitable for desk or wall mounting. The port sizes range from one through six

ports and can be accommodated side by side to give greater port counts if necessary. The blocks come with screws

and double-sided tape to provide an alternative mounting option.

T E C H N I C A L S P E C I F I C A T I O N S

Height Width Depth

One Port 25.1mm 38.4mm 58mm

Two Port 25.1mm 62mm 58mm

Four Port 25.2mm 114.3mm 70mm

Six Port 35mm 170mm 110mm

CLIPSAL DATACOMMS | CATEGORY 6 RJ45 SOLUTION | SURFACE MOUNT BLOCKS


SMRJ88A6/1,WE Surface Mount Block 1 Port Category 6 RJ45





Surface mounted on either wall or desk.•

Accommodates modular products.•

Port labelling area provided.•

Category 6 connectors included. •

SMRJ88A6/1,WE

SMRJ88A6/2,WE

SMRJ88A6/4,WE

SMRJ88A6/6,WE

category 6 rj45 solution - clipsalupdates.clipsal.com/clipsalonline/files/brochures/w...category 6...

Documents