new 2018 tsm catalog!4. to make sure you get the right kit the first time… d. etermine. w. hat. y....
TRANSCRIPT
DISC BRAKE ACCESSORIES
FRONT DISC
Page 14
REAR DISC
Page 17 Page 11
SUMMER 2018
TRANSFER CASE
Page 21
WATTS LINKAGE
Page 29
!2
DISC BRAKES HAVE SEVERAL ADVANTAGES OVER DRUM BRAKES
• Disc brakes cool much faster than drum brakes – so they are much better for heavy braking, high speed stops, multiple braking, trailer towing, mountain driving etc.
• Disc brakes are self adjusting
• Disc brakes are self cleaning – this doesn’t mean much on a street rod but off-road in mud, drum brakes collect grit and then the shoes grind it into the drums. Drums can be ruined in as little as 50 miles
• Disc brakes have less rotating weight than drums.
• Disc brakes pads are much easier to change than drum brake shoes.
• Disc brakes work more consistently and evenly than drum brakes.
*Photos in catalog and online may not represent your exact kit
DISC BRAKES
The Streetrod Mfg. Co., Inc. 4321 Willow Creek Rd Castle Rock CO 80104-9766
(303) 688-6882 Fax (303) 660-4660
TSMMFG.NET
!3
!4
To Make Sure You Get the Right Kit the First Time…
DETERMINE WHAT YOUR REAR END IS OUT OF Measure the spacing of the holes in your axle housing and compare the measurements with the patterns on page 6 & 7 of
this catalog. Ford especially has lots of different ends on their rear ends.
DETERMINE THE WHEEL STUD SPACING Ford is 5 x 4 1/2. This means studs on a 4 1/2” circle. You can’t measure across 2 studs because with only 5 studs the studs aren’t directly opposite each other. 6 studs will work that way but 5 studs will usually measure 1/4” less than the
spacing actually is. Check the pattern on page 5. On the Drive Shaft Parking brake you need to measure the spacing of the U-Bolt holes and compare with the chart on page 6 & 7.
On our disc brake kits we use G.M. Single piston calipers. In this catalog they are called:
LARGE G.M. (D-52 pad, 7” mounting screw spacing, 1 1/4” wide rotor)
SMALL G.M. (D-154 pad, 5 1/2” mounting screw spacing, 1” wide rotor)
WE HAVE TWO OBJECTIVES WITH OUR BRAKE KITS:
1. To use as many standard American parts as possible
2. We supply as complete a kit as possible, taking all the guesswork out of parts needed to complete installation.
1.
!5
WHEEL BOLT-PATTERN GAUGE
!6
J. CJ 5-7 MID ’70-’75, DANA 44 J. CJ 5-7 ‘48-MID ’70 M. CHRYSLER THRU 1/2 TON
Diagram Measurements: A=1 1/4” B= 2” C= 2”
Diagram Measurements: A=2’ B= 2” C= 2”
Diagram Measurements: A=3 3/16” B= 1 39/64” C= 3 9/16”
L. TOYOTA LAND CRUISER ‘60-’80 G. LATE MODEL G.M. S-10, 15 F. STUDEBAKER
Diagram Measurements: A=2 1/8” B= 2 1/8” C= 2 1/8”
Diagram Measurements: A=5 3/8” B= --- C= 2 11/16”
Diagram Measurements: A=2 15/16” B= 2 1/2” C= 2 15/16”
!7
F. FORD & BRONCO SMALL BEARING, CJ 5-7 ‘76+, CHEROKEE 80-89, DANA 44, AMERICAN MOTOR CO. 66-83
F. FORD LARGE BEARING F150 - BRONCO, 72-80 SCOUT
F. FORD LARGE BEARING STYLE 2, 8.8 F150, EXPLORER, SOME BRONCO II, WRANGLER
Diagram Measurements: A= 3 5/16” B= 2” C= 3 5/16”
Diagram Measurements: A= 3 1/2” B= 2 3/8” C= 3 1/2”
Diagram Measurements: A= 3 9/16” B= 2” C= 3 9/16”
F. FORD MUSTANG II, 7.5-8.8, BRONCO II, RANGER
F. 55-64 CHEVROLET, G.M. 1/2 TON TRUCK, 65-72 IMPALA CAPRICE
F. G.M. 1/2 TON TRUCK 88+
Diagram Measurements: A= 3 3/8” B= 1 11/16” C= 3 1/16”
Diagram Measurements: A= 3 3/8” B= 2 21/32” C= 3 3/8”
Diagram Measurements: A= 3 9/16” B= 2 27/32” C= —-
F. 10-12 BOLT G.M. CAR, SOME S-10 & S-15, ASTRO VAN
F. 73-86 CHEROKEE 6 X 5 1/2 F. CHEROKEE 90+
Diagram Measurements: A= 3 1/8” B= 2 7/16” C= 2 5/8”
Diagram Measurements: A= 3 3/4” B= 2 1/2” C= 3”
Diagram Measurements: A= 3 5/16” B= 1 19/32” C= 3 9/16”
F. TOYOTA LAND CRUISER 81+ FJ 60
F. TOYOTA TRUCK F. AMERICAN MOTOR CO. 66-83
Diagram Measurements: A= 4 3/8” B= 3 15/16” C= 3 5/16”
Diagram Measurements: A= 3 7/16” B= 3 7/16” C= 3 7/16”
Diagram Measurements: A= 3 5/16” B= 2” C= 3 5/16”
F. 14 BOLT G.M. F. FORD 72-79, DANA 60 FULL FLOATING
Diagram Measurements: A= 3 5/16” B= 3 5/16” C= 3 5/16”
Diagram Measurements: A= 3 9/16” B= 3 3/8” C= 3 9/16”
!8
!9
!10
!11
FRONT DISC BRAKE KITS
!12
COMPLETE FRONT DISC BRAKE KITS WITH NEW LOADED CALIPERS, STAINLESS LINES & GRADE 8 BOLTS
TYPE OF FRONT END ROTOR CALIPER PART # PRICE
ECONOLINE 61-67 CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1190 $497.95
35-42 CHRYSLER CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1339B $469.95
35-42 CHRYSLER CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1339S $469.95
46-54 PLYMOUTH CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1352B $469.95
46-54 PLYMOUTH CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1352S $469.95
46-54 DODGE, DESOTO CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1353B $469.95
46-54 DODGE, DESOTO CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1353S $469.95
46-54 DESOTO, CHRYSLER CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1354B $509.95
46-54 DESOTO, CHRYSLER CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1354S $509.95
46-54 DESOTO, CHRYSLER CUSTOM ROTOR 5X5 1/2
78-83 SMALL G.M. 1354-5.5B $519.95
46-54 DESOTO, CHRYSLER CUSTOM ROTOR 5X5 1/2
78-83 SMALL G.M. 1354-5.5S $519.95
62-72 B BODY PLYMOUTH, DODGE,
CUSTOM ROTOR 5X4 1/2
I.ARGE G.M. 1364 $489.95
1965 - 1983 AMC CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1390F 1390R
497.95 489.95
52 DODGE TRUCK CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1439B $509.95
52 DODGE TRUCK CUSTOM ROTOR 5X4 1/2
78-83 SMALL G.M. 1439S $509.95
34-36 INTERNATIONAL CUSTOM ROTOR 5X4 1/2
78-83 SMALL GM 1450-3 $517.95
34-36 INTERNATIONAL CUSTOM ROTOR 5X4 1/2
78-83 SMALL GM 1450-5 $517.95
41-68 INTERNATIONAL CUSTOM ROTOR 5X4 1/2
78-83 SMALL GM 1457 $507.95
59-68 INTERNATIONAL CUSTOM ROTOR 5X4 1/2
78-83 SMALL GM 1458 $507.95
65-66 F-100 CUSTOM ROTOR 5X5 1/2
78-83 SMALL GM 1501 $517.95
65-66 F-100 CUSTOM ROTOR 5X5 1/2
78-83 SMALL GM 1501X2 $537.95
67-72 F-150 CUSTOM ROTOR 5X5 1/2
78-83 SMALL GM 1502 $517.95
65-72 F-100 CUSTOM ROTOR 5X5 1/2
78-83 SMALL GM 1502X2 $537.95
57-73 INTERNATIONAL CUSTOM ROTOR 5X5 1/2
78-83 SMALL GM 1557 $507.95
57-73 INTERNATIONAL CUSTOM ROTOR 5X5 1/2
78-83 SMALL G.M. 1558 $507.95
60-75 FJ 40 CUSTOM ROTOR 6X5 1/2
WILWOOD 4 PISTON
1690 $700.00
48-52 FORD F2 & F3 CUSTOM ROTOR 8X6 1/2
I.ARGE GM 1849 $489.95
53-56 FORD F250 CUSTOM ROTOR 8X6 1/2
I.ARGE GM 1853 $489.95
63-68 D-200 CUSTOM ROTOR 8X6 1/2
I.ARGE GM 1860 $509.95
70 Dodge 1 Ton Custom Rotor 8x6 1/2
Large GM 1870 $849.95
!13
MUSTANG II
Description Part # Price
New Granada Rotors with Inner Races (Pair) 1200 $100
7 5/8” - 1102 6 3/4” - 71-73 PINTO
BRACKETS ONLYTYPE OF FRONT END ROTOR CALIPER PART # PRICE
74-78 MUSTANG II 74-80 PINTO 75-80 BOBCAT
75-80 GRANADA 69-74 NOVA 1002* $89.95
74-78 MUSTANG II 74-80 PINTO 75-80 BOBCAT
75-80GRANADA 5X41/2 78-83 SMALL G.M. 1102* $89.95
*MUST WATCH A ARM AND BRAKE HOSE CLEARANCE
!14
REAR DISC BRAKE KITS
!15
TYPE OF REAR END PART # PRICE
FORD 8"& 9" ALL 3 ENDS. ALSO INCLUDES: STUDS, & SPACER PLATES 2100 $639.95
FORD 9' WITH 1/2" BOLTS. ALSO INCLUDES: STUDS & SPACER PLATES 2100-5 $639.95
FORD MUSTANG II. ALSO INCLUDES: STUDS & SPACER PLATES 2130 $639.95
FORD MUSTANG II FOUR LUG 2130-4 $659.95
55-56 T-BIRD DANA 44. ALSO INCLUDES: STUDS & SPACER PLATES 2100-5T $649.95
8.8 RANGER, BRONCO II & EXPLORER. ALSO INCLUDES: STUDS. 2100C $639.95
RANGER, BRONCO II, EXPLORER 79-88 MUSTANG & T-BIRD 7.5 & 8.8 REAR. ALSO INCLUDES: STUDS.
2150 $639.95
1935 - 1960 CHRYSLER. ALSO INCLUDES: SPACER PLATES 2160E $639.95
CHRYSLER THRU 1/2 TON. ALSO INCLUDES: SPACER PLATES 2160 $639.95
CHRYSLER THRU 1/2 TON C-CLIP DAKOTA. 2160C $639.95
DODGE DAKOTA, DURANGO 6 LUG.
2552 $659.95
10 BOLT METRIC STUD 1993-2004 S-10 & S-15 GM REAR DISC BRAKE CONVERSION KIT.
2180M $609.95
1O & 12 BOLT G.M. C-CLIP 2180 $609.95
1O & 12 BOLT G.M. 1964-1977 NON C-CLIP. ALSO INCLUDES: SPACER PLATES
2181 $619.95
65-72 IMPALA CAPRICE. 2182 $649.95
ASTRO VAN. 2183 $629.95
LATE MODEL G.M.-10 BOLT 1978-1988 G-BODY ALSO S-10.S-15 - THRU 93 1982-2004.
2090 $629.95
55-64 CHEVROLET. ALSO INCLUDES: SPACER PLATES 2350 $619.95
AMERICAN MOTORS 66-83. ALSO INCLUDES: STUDS & SPACER PLATES 2190 $649.95
STUDEBAKER. ALSO INCLUDES: SPACER PLATES 2191 $639.95
41-73? INTERNATIONAL R-100 TRUCK INCLUDES: SPACER PLATES 2050 $669.95
COMPLETE CAR & LIGHT TRUCK REAR DISC BRAKE KITS INCLUDE: ROTORS, BRACKETS, GRADE 8 BOLTS & GRADE 8 NUTS, NEW LOADED CALIPERS & STAINLESS LINES
CABLE TO CALIPER ADAPTERS Short Cable Extension Kit Includes: 2 Cable Extensions Sleeves & Clips (Part # 3111) $20.00
!16
COMPLETE 1/2 TON TRUCK REAR DISC BRAKE KITS CALIPER KITS INCLUDE NEW ROTORS, BRACKETS, GRADE 8 BOLTS, GRADE 8 NUTS, GRADE 8 LOCK WASHERS, NEW LOADED CALIPERS & STAINLESS LINES
TYPE OF REAR END ROTOR PART # PRICE
FORD 1/2 TON TRUCK 9” ALL 3 ENDS BRONCO 1957-1986. INCLUDES: SPACER PLATES
TRUCK DRILLED TO 5x5 1/2 2500 $659.95
FORD BRONCO 9” ALL 3 ENDS 1966-1986. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2500B $659.95
FORD 1/2 TON TRUCK 1/2” BOLTS 9’ 1957-1986. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2500-5 $659.95
FORD BRONCO 1/2” BOLTS 9’ 1957-1986. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2500-5B $659.95
1953-56 F 100. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 MM 2501-5 $659.95
FORD F-150 & BRONCO 80+ ’96 E150 VAN TO ‘06. TRUCK DRILLED TO 5x135 2530 $659.95
FORD F-150 8.8 9.75 97+. TRUCK DRILLED TO 5x5 1/2 2530M $659.95
G.M. 1/2 TON TRUCK SUBURBAN 5 LUG. TRUCK DRILLED TO 5x5 2540 $659.95
G.M. 88+ 1/2 TON TRUCK SUBURBAN 5 LUG. TRUCK DRILLED TO 5x5 2541 $659.95
G.M. 1/2 TON TRUCK 62-87 SUBURBAN BLAZER 6 LUG TO ’91. TRUCK DRILLED TO 6x5 1/2 2531 $609.95
G.M. 88-98 1/2 TON TRUCK 10-12 BLAZER 6 LUG ‘92+. TRUCK 6x5 1/2 2532 $609.95
G.M. 6 LUG COLORADO & CANYON TRUCK DRILLED TO 6x5 1/2 2533 $639.95
SCOUT MID 74-80. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2550 $669.95
1971 to 1980 D-100 Pickup TRUCK DRILLED TO 5x5 1/2 2550Pickup $669.95
1971 to 1980 Travelall TRUCK DRILLED TO 5x5 1/2 2550Travelall $669.95
CHRYSLER TRUCK 8 3/4 & DANA 60. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2551 $659.95
CHRYSLER TRUCK C-CLIP 8 1/4, 9 1/4. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2551C $659.95
CHRYSLER TRUCK 94 & NEWER. TRUCK DRILLED TO 5x5 1/2 2551-94 $659.95
FULL SIZE CHEROKEE, WAGONEER, J10 TRUCK 1974-1992 AMC 20 DANA 44. INCLUDES: SPACER PLATES
TRUCK 6x5 1/2 2460 $639.95
CHEROKEE, WAGONEER, XJ WRANGLER 1984-1989 DANA 35 C-CLIP. INCLUDES: STUDS & SPACER PLATES
CUSTOM ROTOR 5x4 1/2
2560 $639.95
CHEROKEE 90+ DANA 35 C-CLIP 8 1/4 WAGONEER XJ, YJ, TJ WRANGLER. INCLUDES: STUDS & SPACER PLATES
CUSTOM ROTOR 5x4 1/2
2561 $649.95
CHEROKEE 86-89 DANA 35 COMANCHE NON C CLIP. INCLUDES: STUDS & SPACER PLATES
CUSTOM ROTOR 5x4 1/2
2562-35 $649.95
CHEROKEE 86-89 DANA 44 NON C CLIP. INCLUDES: STUDS & SPACER PLATES CUSTOM ROTOR 5x4 1/2
2562-44 $649.95
97+ TJ, WRANGLER DANA 35. INCLUDES: STUDS & SPACER PLATES CUSTOM ROTOR 5x4 1/2
2563-35 $649.95
97-06 TJ, WRANGLER DANA 44. INCLUDES: STUDS & SPACER PLATES CUSTOM ROTOR 5x4 1/2
2563-44 $649.95
97+ TJ, WRANGLER DANA 44. INCLUDES: SPACER PLATES MODIFIED AXLES 2563-5.5 $659.95
CJ-5 AND JEEPSTER MID 1970-1975 DANA 44. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2570 $659.95
CJ-5 1948-Mid 1970 DANA 44. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2580 $659.95
69-73 J-20. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2580 J20 $659.95
CJ-5 7-8 76-86 SCRAMBLER MODEL 20. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2590 $659.95
CJ-7 86-87 DANA 44. INCLUDES: SPACER PLATES TRUCK DRILLED TO 5x5 1/2 2591 $659.95
TOYOTA LAND CRUISER FJ-40-45-55 1960-1980. 6 LUG TRUCK 2490 $619.95
TOYOTA LAND CRUISER FJ-40-45-55 1960-1980 WITH WILWOOD CALIPER. 6 LUG TRUCK 2490W $600
TOYOTA LAND CRUISER INCL STOCK FULL FLOAT 1981+ FJ-40, 60-62, 80-82. 6 LUG TRUCK 2491 $619.95
TOYOTA LAND CRUISER 75-80 FULL FLOATING FJ 40-45-55-60. 6 LUG TRUCK 2492 $619.95
TOYOTA TRUCK 85- 1979-1985 6 LUG TRUCK 2493 $629.95
TOYOTA TRUCK 86+ 1986-2004 6 LUG TRUCK 2494 $629.95
!17
COMPLETE 3/4 & 1 TON TRUCK REAR DISC BRAKE KITS NEW ROTORS, BRACKETS, GRADE 8 BOLTS, GRADE 8 LOCK WASHERS, GRADE 8 NUTS, NEW LOADED CALIPERS & STAINLESS LINES
2620-2621, 2630-2631, 2830 A - 3 5/16” B - 3 5/16”2660, 2661 A - 3 3/8” B - 3 9/16”2670, 2870 A - 3 23/64” B - 3 19/32”2680-2680LN, 2659 A - 3 3/8” B - 3 3/8”2682N-2882 A - 3 9/32” B - 3 9/32”
TYPE OF REAR END PART # PRICE88+ G.M. 10 & 14 BOLT HEAVY DUTY SEMI FLOATING. 2620 $669.95
88+ G.M. 10 & 14 BOLT HEAVY DUTY SEMI FLOATING SHORT AXLE. 2620S $619.95
88+ G.M. 10 & 14 BOLT HEAVY DUTY SEMI FLOATING. 2621 $709.95
88+ G.M. 10 & 14 BOLT HEAVY DUTY SEMI FLOATING SHORT AXLE. 2621S $659.95
2002+ G.M. SIERRA & SILVERADO 10 & 14 BOLT H.D. 2620SS $619.95
1972 & EARLIER GM DANA 60 8 LUG 7 BOLT BACKING PLATE. ALSO FITS J-20 2629 $729.95
G.M. 14 BOLT FULL FLOATING 1973 & LATER 2630E $689.95
G.M. 14 BOLT FULL FLOATING 1986 & LATER DRUM SLIPS OVER STUDS. 2630L $729.95
1980-1987 G.M. 14 BOLT SEMI FLOATING. 2631E $729.95
1988 – PRESENT G.M. 14 BOLT SEMI FLOATING. 2631L $729.95
FORD DANA 60 FULL FLOAT 1967-1972 SINGLE WHEEL ONLY. 2659 $689.95
FORD DANA 60 FULL FLOAT 1973-1979 SINGLE WHEEL ONLY. 2660 $669.95
1980-1996 FORD 8 LUG REAR DISC BRAKE DRUM ON BACK OF HUB. 2661 $729.95
1980-1996 FORD 8 LUG REAR DISC BRAKE DRUM SLIPS ON. 2661L $729.95
FORD STERLING FULL FLOAT 1981-1998 SINGLE WHEEL ONLY. 2670 $729.95
DODGE DANA 60 FULL FLOAT 93 & EARLIER SINGLE WHEEL ONLY. 2680 $689.95
DODGE DANA 70 1988-1993 SINGLE WHEEL ONLY. 2680LN $729.95
DODGE DANA 60, 70 & 80 FULL FLOAT 1994 - 2001 SINGLE WHEEL ONLY. 2682N $729.95
GMC MOTORHOME. 2700 $1285.00
GM 14 BOLT & D-70 DUAL WHEEL. 2830 $989.95
FORD STERLING DUAL REAR WHEELS. 1981 - 1998 2870 $1089.95
1994-2007 DODGE DANA 70 & 80 DUAL REAR WHEELS. 1994 - 2001 2882 $1089.95
GM 8 Lug Eaton full floating rear axle - Drum is on the back side of hub 2630Eaton $689.95
GM 8 Lug Eaton full floating rear axle - Drum slips off once wheel is removed 2630EatonL $729.95
Jeep J20 Mid 1973-1985 2640 $729.95
!18
TRANSFER CASE PARKING BRAKE
!19
TRANSFER CASE PARKING BRAKE REAR END DESCRIPTION U-BOLT SPACING PART # PRICEFJ-40 MECHANICAL PARKING BRAKE SECOND SEAL FOR WORN YOKES.
INCLUDES: STAINLESS ROTOR, CALIPER, BRACKET2.360 x 2.695 4065 $399.95
FJ-60 MECHANICAL PARKING BRAKE. INCLUDES: STAINLESS ROTOR, CALIPER, BRACKET
2.6 x 2.6 & 2.36 x 2.695 4066 $399.95
FJ-60 MB3 MECHANICAL PARKING BRAKE. INCLUDES: STAINLESS ROTOR, CALIPER, BRACKET
2.6 x 2.6 & 2.36 x 2.695 4066MB3 $299.95
84-88 TOYOTA TRUCK MECHANICAL PARKING BRAKE. INCLUDES: STAINLESS ROTOR, CALIPER, BRACKET
2.35 x 2.68 4067 $320.00
NP 205 NP 205 TRANSFER CASE PARKING BRAKE KIT 1.7969 X 3.75 4205-0071 $300.00NP 205 NP 205 TRANSFER CASE PARKING BRAKE KIT 1.43 X 2.9 4205-0600 $300.00NP 205 NP 205 TRANSFER CASE PARKING BRAKE KIT 1.43 X 3.3 4205-0625 $300.00NP 205 NP 205 TRANSFER CASE PARKING BRAKE KIT (1350 YOKE) 1.66 X 3.185 4205-0681 $300.00NP 205 NP 205 TRANSFER CASE PARKING BRAKE KIT 1.82 X 3.24 4205-0690 $300.00
304 STAINLESS ROTORS
U-Bolt Hole Spacing (both directions)
U-Bolt Hole Spacing (both directions)
U-Bolt Hole U-Bolt Hole Spacing Diameter
PART # PRICE
1.43 X 2.9 36.33 X 73.66 5/16 8 inch 0600 $125.00 ea1.43 X 2.98 36.33 X 75.70 5/16 8 inch 0620 $125.00 ea1.43 X 3.3 36.33 X 83.82 5/16 8 inch 0625 $125.00 ea1.438 X 3.434 36.513 X 87.313 5/16 8 1/2 inch 0947 $120.001.488 X 2.81 37.80 X 71.38 1/4 8 inch 0635 $125.00 ea1.5 X 2.34 38.10 X 59.44 5/16 8 inch 0020 $125.00 ea1.595 X 2.885 40.52 X 73.28 1/4 8 inch 0630 $125.00 ea1.57 X 2.975 39.88 X 75.57 5/16 8 inch 0640 $125.00 ea1.57 X 3.3 39.88 X 83.82 5/16 8 inch 0660 $125.00 ea1.53 X 3.31 38.87 X 84.08 5/16 8 inch 0637 $125.00 ea1.638 X 3.304 (1350 Yoke) 41.61 X 83.93 3/8 8 inch 0664 $125.00 ea1.65 X 3.175 41.91 X 80.65 1/4 8 inch 0680 $125.00 ea1.66 X 3.76 42.17 X 95.51 3/8 8 1/2 inch 0070 $120.00 ea1.66 X 3.185 (1350 Yoke) 42.17 X 80.90 3/8 8 inch 0681 $125.00 ea1.66 X 3.185 (1350 Yoke) 42.17 X 80.90 3/8 10 inch 0681-10 $140.00 ea1.661 X 3.227 (1350 Yoke) 42.19 X 81.97 3/8 8 inch 0665 $125.00 ea1.7969 X 3.75 45.64 X 95.25 5/16 8 1/2 inch 0071 $140.00 ea1.82 X 3.24 46.23 X 82.30 5/16 8 inch 0690 $125.00 ea2.01 X 2.395 51.06 X 60.84 5/16 8 inch 0695 $125.00 ea2.35 X 2.68 59.69 X 68.08 10mm 8 inch 0067 $125.00 ea2.36 X 2.695 59.95 X 68.46 7/16 8 1/4 inch 0065 $125.00 ea2.36 X 2.695 59.95 X 68.46 7/16 8 1/2 inch 0166 $140.00 ea2.6 X 2.6 66.04 X 66.04 7/16 8 1/2 inch 0066 $140.00 ea2.665 X 2.945 67.70 X 74.81 5/16 8 inch 0670 $125.00 ea
!20
REAR END DESCRIPTION ***U-BOLT SPACING PART # PRICE
8” FORD Bolt-On 1 1/8" U-Joint Cap 1 9/16" x 2 31/32" 6840MB3 $279.95
8” FORD Bolt-On 1 1/16" U-Joint Cap 1 9/16" x 2 31/32" 6841MB3 $279.95
9” FORD Bolt-On 5/16" U-Bolt 1 7/16" x 2 29/32" 6000MB3 $279.95
9” FORD Bolt-On 5/16" U-Bolt 1 7/16" x 3" 6020MB3 $279.95
9” FORD Bolt-On 5/16" U-Bolt 1 7/16" x 3 1/4" 6025MB3 $279.95
9” FORD Bolt-On 5/16" U-Bolt 1 9/16" x 2 31/32" 6040MB3 $279.95
9” FORD Bolt-On 5/16" U-Bolt 1 9/16" x 3 1/4" 6060MB3 $279.95
9” FORD 1350 After Market Yoke 1.638 X 3.304 6064MB3 $309.95
9” FORD 1350 After Market Yoke 1.661 X 3.227 6065MB3 $309.95
9” FORD Bolt-On Flange Style 2 3/4" x 3" 6070MB3 $249.95
9” FORD 1350 After Market Yoke 1.66 X 3.185 6081MB3 $309.95
ROCKWELL Mechanical Parking Brake. Includes: Stainless Rotor, Caliper, Bracket
1.66 x 3.76 4070 $399.95
DIVCO Mechanical Parking Brake. Includes: Stainless 10” Rotor, Caliper, Bracket
1.66 X 3.185 6962 $400.00
55-64 CHEV Drill 3 holes through fins. Kit Includes: Brackets, Bolts, Rotor, Hurst Airheart Aluminum Caliper with Pads, Sleeves and Bolts to attach it to the caliper bracket. (Bracket bolts to fins on 3rd Member.
1 7/16” x 2 29/32” 6400 $249.95
PINION MOUNTED PARKING BRAKE
DRIVE SHAFT PARKING BRAKE
55-64 Chev Part # 6400
!21
PINION MOUNTED PARKING BRAKEREAR END DESCRIPTION ***U-BOLT
SPACINGPART #
PRICE
8” FORD 1 1/8” U-JOINT CAP 1 9/16” x 2 31/32” 6840 $229.958” FORD 1 1/16” U-JOINT CAP 1 9/16” x 2 31/32” 6841 $229.959” FORD 5/16” U-BOLT 1 7/16” x 2 29/32” 6000 $229.959” FORD 5/16” U-BOLT 1 7/16” x 3” 6020 $229.959” FORD 5/16” U-BOLT 1 7/16” x 3 1/4” 6025 $229.959” FORD 5/16” U-BOLT 1 9/16” x 2 31/32” 6040 $229.959” FORD 5/16” U-BOLT 1 9/16” x 3 1/4” 6060 $229.959” FORD 1350 YOKE 3/8” U-Bolt 1.638” x 3.304” 6064 $259.959” FORD 1350 YOKE 3/8” U-Bolt 1.66” x 3.227” 6065 $259.959” FORD FLANGE STYLE 2 3/4” x 3” 6070 $199.959” FORD 1350 YOKE 3/8” U-Bolt 1.66” x 3.185” 6081 $259.95HALIBRAND 5/16” U-BOLT 1 7/16” x 2 29/32” 6100 $229.95FRANKLAND 5/16” U-BOLT 1 7/16” x 2 29/32” 6100 $229.95WINTERS 1/4” U-BOLT 1 5/8” x 3 3/16” 6180 $209.95*CORVETTE DRIVER’S SIDE CALIPER U-BOLT 1 7/16” x 2 29/32” 6200 $229.95*CORVETTE DRIVER’S SIDE STRAP 1 7/16” x 2 29/32” 6201 $229.95*CORVETTE PASSENGER SIDE CALIPER U-BOLT 1 7/16” x 2 29/32” 6300 $229.95*CORVETTE PASSENGER SIDE STRAP 1 7/16” x 2 29/32” 6301 $229.95*CORVETTE DRIVER’S SIDE CALIPER U-BOLT 1 9/16” x 3 1/4” 6260 $229.95*CORVETTE DRIVER’S SIDE STRAP 1 9/16” x 3 1/4” 6261 $229.95*CORVETTE PASSENGER SIDE CALIPER U-BOLT 1 9/16” x 3 1/4” 6360 $229.95*CORVETTE PASSENGER SIDE STRAP 1 9/16” x 3 1/4” 6361 $229.95**CHRYSLER FITS 8 3/4” CHRYSLER (CAR AXLE) 1 1/2” x 2 13/16” 6535 $219.95**CHRYSLER FITS 8 3/4” CHRYSLER (CAR AXLE) 1 9/16” x 3 5/16” 6537 $219.95DANA 60 FITS DANA CAR AND 1/2 TON 1 5/8” x 3 3/16” 6580 $209.95JAG CHEV YOKE SEDAN REAR & E TYPE 1 7/16” x 2 29/32” 6600 $269.95JAG ORIGINAL FLANGE YOKE SEDAN REAR & E
TYPE2” x 2 3/8” 6695 $269.95
ALUM VET ROTOR ONLY 1 9/16” x 2 29/32” 0630 $125.00INTERNATIONAL 41-49 INTERNATIONAL PARK BRAKE 1 7/16” x 3 7/16” 6947 $300.00
*63-79 **MUST MACHINE YOKE ***CHECK YOUR YOKE
!22
CALIPERS MEASUREMENT OF CALIPERS
PART # DESCRIPTION PRICE
3100 (2) NEW SMALL G.M. FRONT CALIPERS, PADS & MOUNTING BOLTS $120.00 PAIR
3110 (2) NEW SMALL G.M. REAR CALIPERS, PADS, MOUNTING BOLTS & CALIPER PARKING BRAKE PARTS
$300.00 PAIR
3010 (2) NEW LARGE G.M. FRONT CALIPERS, PADS & MOUNTING BOLTS $120.00 PAIR
3020 (2) REBUILT 80MM X LARGE FRONT CALIPERS, PADS & MOUNTING BOLTS
$100.00 PAIR
3120 (2) NEW LARGE G.M. REAR CALIPERS, PADS, MOUNTING BOLTS & CALIPER PARKING BRAKE PARTS
$320.00 PAIR
3121 (2) NEW LARGE G.M. REAR CALIPERS, PADS, MOUNTING BOLTS & CALIPER PARKING BRAKE PARTS (NO CABLE BRACKET)
$320.00 PAIR
CALIPERS
!23
MB 2 Caliper Often Purchased with MB 2 Caliper
MB 3 Caliper Often Purchased with MB 3 Caliper
MB 4 Caliper Often Purchased with MB 4 Caliper
Clevis & Pin
!1/4" Diameter Pin hooks to cable with a crimped end. Part # 7201 $10.00ea
Cable Bracket
! Part # 7095 $30.00ea
Extra Large mechanical caliper for Larger Rotors and Industrial Uses.
! Positive pad retraction. Adjustable pad pressure. Mounting bracket included. Fits rotors 9 1/2" to 13" inch Diameter. Overall length 8 5/8" inches Height 1 5/8" inches. Mounting bracket hole spacing 5 1/2" center to center Part # 7213 $135.00ea 1/8" to 7/8" Rotor thickness Part # 7214 $135.00ea 7/8" to 1 7/8" Rotor thickness
Clevis & Pin
! 1/4" Diameter Pin hooks to cable with a crimped end. Part # 7201 $10.00ea
Cable Bracket
Part # 7095 $30.00ea
!Large mechanical caliper for transfer case parking brakes. Also for Other Industrial Uses.
Positive pad retraction. Adjustable pad pressure. Mounting bracket included. Fits rotors 10" and smaller Diameter. Rotor thickness 1/8 through 5/8 thick. Part # 7212 $120.00ea
Clevis & Pin
!
3/8" Diameter Pin 3/8-24 Female Thread
Part # 7205 $10.00ea
! Fits rotors 3/16" to 3/8" thick 8" and smaller Diameters Mounting Pins 6" apart overall length 7" height 2" The lever is Reversible Part # 7211 $190.00ea
Clevis & Pin
! 1/4" Diameter Pin 10/32 Female Thread Part # 7204 $10.00ea
Cable
! Specify Length needed. Every 6 inches from 30 inches to 60 inches. Add $2.00 Extra for every 6 inch increase from 66 inches to 168 inches. Part # MB-4 Cable $100.00ea
Clevis & Pin
1/4" Diameter Pin 10/32 Female Thread Part # 7204 $10.00ea
Cable
! Specify Length needed. Every 6 inches available from 30 inches to 60 inches. Part # MB-3 Cable $100.00ea Add $2.00 for each additional 6” added from 66 to 168 inches
Clevis & Pin
!3/8" Diameter Pin 3/8-24 Female Thread hooks to cable with a crimped end.
Part # 7206 $10.00ea
MB-2 Bracket
!
Helps mount 7211 caliper.
Part # 7208 $30.00ea
!24
MB7 Caliper
7 inch pin to pin mechanical caliper. This caliper will fit all 7 inch pin to pin large GM caliper brackets and rotors. You can use our double caliper brackets mounting this MB-7 in one position for your parking brake and the non parking brakes hydraulic calipers part #3010 or #3020 for your hydraulic brakes. This will give you a trouble free parking brake that will not get out of adjustment and also trouble free hydraulic brakes. This mechanical caliper holds the pads off of the rotor when the cable is released for no drag or pad wear. Uses modified D-52 GM pads. Fits rotor thickness from .5 to 1.3 inches. Cable bracket rotates 360 degrees to hook up your cables in any position.
Part # MB7 $280.00 pair
MB5 Caliper
5.5 inch pin to pin mechanical caliper. This caliper will fit all 5.5 inch pin to pin small GM caliper brackets and rotors. You can use our double caliper brackets mounting this MB-5 in one position for your parking brake and the non parking brakes hydraulic calipers part #3100 for your hydraulic brakes. This will give you a trouble free parking brake that will not get out of adjustment and also trouble free hydraulic brakes. This mechanical caliper holds the pads off of the rotor when the cable is released for no drag or pad wear. Uses modified D-154 GM pads. Fits rotor thickness from .5 to 1.3 inches. Cable bracket rotates 360 degrees to hook up your cables in any position.
Part # MB5 $280.00 pair
Clevis & Pin
1/4" Diameter Pin 10/32 Female Thread. Part # 7204 $10.00ea
Clevis & Pin
1/4" Diameter Pin hooks to cable with a crimped end. Part # 7201 $10.00ea
!25
Provides a temporary "hold" assist for one brake line. Can use with DOT 3, 4, and 5. 12 Volt fits 3/16", 1/4" and 5/16" lines
MICO HYDRAULIC BRAKE LOCK MICO 690 DUAL SYSTEM SINGLE LINE 10 FOOT CABLE OPERATED
(PART # 3800) $425.95 (PART # 3802) $1235.96 (PART # 3804) $660.00
DUAL LINE 10 FOOT CABLE OPERATED
WE DO NOT HAVE REPAIR PARTS. CHECK WITH MICO INC.:
Mico Inc. PO Box 8118 N Mankato, MN 56002-8118
(PART # 3806) $700.00 1-507-625-6426 Fax: 1-507-625-3212
MATERIAL LENGTH THREAD SIZE BANJO THREAD PART # PRICERUBBER 91/2" 3/8-24 M10X 1.5 3700 $50.00
RUBBER 91/2" 3/8- 24 7/16-20 3701 $50.00BRAIDED STLS 8" AN - 3 & 3/8 - 24 M10X1.5 3702-8 $50.00
BRAIDED STLS 161/2" AN - 3 & 3/8 - 24 M10X1.5 3702-16 $50.00BRAIDED STLS 8" AN - 3 & 3/8 - 24 7/16 - 20 3703-8 $50.00
BRAIDED STLS 161/2" AN - 3 & 3/8 - 24 7/16 - 20 3703-16 $50.00BRAIDED STLS 8" M10X1.0 M10X1.5 3704-8 $50.00
L.C.STLS KIT 14" & 44" M10X1.0 M10X1.5 3705 $50.00BRAIDED STLS 29” & 31” 7/16-24 M10X1.5 3708 $125.00 for two pairBRAIDED STLS 8” 10MMX1.0 10MMX1.5 3707-8wilwood $50.00
BRAIDED STLS 18” 10MMX1.0 10MMX1.5 3707-18wilwood $50.00
FLEXIBLE BRAKE HOSES
RUBBER
BRAIDED STAINLESS
DISC BRAKE ACCESSORIES
!26
STAINLESS DROP LINES
LINES ADAPTERS
PART # PART #
12” 3782-12 $12.00 Part # 3784 $4.00 3/16f to - 3
14” 3782-14 $12.00 Part # 3785 $4.00 1/4f to - 3
16” 3782-16 $12.00 Part # 3786 $4.00
10mm. 1f to – 3
18” 3782-18 $14.00
20” 3782-20 $14.00 Part # 3794 $4.00 3/16m to – 3
22” 3782-22 $14.00 Part # 3795 $4.00 1/4m to – 3
24” 3782-24 $14.00 Part # 3796 $4.00 10mm. 1m to - 3
28” 3782-28 $14.00
RESIDUAL VALVES
PART # PRESSURE LENGTH PRICE
3402 2 POUND 1 5/81NCH $25.00
3410 10 POUND 1 5/81NCH $25.00
2 lb. can be used when the master cylinder is lower than the calipers. 10 lb. used on drum brakes to keep air from entering wheel cylinders.
THRU THE FRAME BRAKE FITTING (303) STAINLESS
FRAME WIDTH DESCRIPTION PART # PRICE
1/4" ELBOW -3 OUTLET 3/16 INVERTED FLARE ON THE INLET
3710 $50.00
1 1/2" 3715
2" 3720
2 1/4" 3722
2 1/2" 3725
3" 3730
1/4" TEE -3 OUTLET 3/16 INVERTED FLARE ON BOTH INLETS
3750 $50.00
1 1/2" 3755
2" 3770
2 1/4" 3772
2 1/2" 3775
3" 3780
3/16 Brake lines go right into the inlets no extra fittings are needed.
!27
B. CONTROL CABLE CO. FOR CUSTOM AUTOMOTIVE TYPE BRAKE CABLES CONTACT:
Can make cables for any application. They can make cables to fit the rear parking brake calipers as well as any additional lift in your truck. It is the nicest way to hook up the parking brakes. Give them a call.
CONTROL CABLE CO. (562) 949-0455
CONTROLCABLES.COM
A. PROPORTIONING VALVES
Adjustable – Used to balance front to rear brakes
Part # 3328 $49.95
!28
Includes: Complete Cable with Stainless End Rods, Stainless Swivel Support Tubes, Stainless Cable, Clevis and Pin to attach to Caliper Brake Lever, Rear Bracket and Bolts.
*Comes in 6” increments from 24” to 60”; longer than 60”, see price sheet.
To measure, go from connecting point on brake lever to back side of U-Joint Yoke and add 12 inches.
Description Part # Price
Fits 8” Ford Specify Length* 7008 $100
Fits 9” Ford Specify Length* 7009 $100
Fits Halibrand or Frankland Specify Length* 7000 $100
Cable and Clevis (No Bracket) 7010 $80
Clevis and Pin to Help Connect to Hand Brake 10-32 Female Thread 7204 $10
Extra Cable every 6 inches $2
Vega Brake Lever Our Handle Pinto Brake Lever
Hookup Kit: Connects the front of the cable to a Vega Hand Brake Lever
Hookup Kit: Connects the front of the cable to Our Handle
Hookup Kit: Connects the front of the cable to a Pinto Hand Brake Lever
(Part # 7100) $30.00 (Part # 7105) $30.00 (Part # 7110) $30.00
Gennie Shifter Universal Parking Brake Handle
Hookup Kit: Connects the front of the cable to a Gennie Hand brake (old fashioned lever-not lo-line)
Hookup Kit: Universal Bracket for lo-line and other Hand Brake Levers
10” Parking Brake includes Handle and Clevis
(Part # 7120) $30.00 (Part # 7130) $10.00 (Part # 7004S) $50.00
!
!
!
CABLES & HANDLES
!29
MODIFIED WATTS LINKAGE
Universal Watts Includes: Bracket that bolts to 3rd member, special arms with urethane bushings and aluminum caps, Control Rods with 5/8” heim end and clevis for each arm, Frame Brackets and Assorted Bolts
8” Ford Includes: Bracket that bolts to 3rd member 8 1/2 inch height from the center of the pinion to the top of the arms, special arms with urethane bushings and aluminum caps, Control Rods with 5/8” heim end and clevis for each arm, Frame Brackets and Assorted Bolts
9” Ford Includes: Bracket that bolts to 3rd member 8 1/2 inch height from the center of the pinion to the top of the arms, special arms with urethane bushings and aluminum caps, Control Rods with 5/8” heim end and clevis for each arm, Frame Brackets and Assorted Bolts
(Part # 8000) $340.00 (Part # 8008) $340.00 (Part # 8009) $340.00
Plus Features: Complete bolt on, or frame brackets can be welded if desired, mounted in urethane to reduce noise, balanced design with the arms and control rods. (Specify frame width or style. Specify drive shaft centered or housing centered)
What is Watts Linkage? Watts Linkage does the same thing as a Panhard Bar (controls the sideways movement of the rear end) but it moves the rear end straight up and down instead of in an arc like a Panhard Bar. The narrower the frame rails the more Watts Linkage is needed.
UNIVERSAL 6” x 6” wide Arms FORD 9” 6” High
!30
MODIFIED WATTS LINKAGE
DESCRIPTION PART # PRICE INCLUDES
Watts Franklin, Halibrand Winters 8001 $340 BRACKET THAT BOLTS TO 3RD MEMBER, SPECIAL ARMS WITH URATHANE BUSHINGS AND ALUMINUM CAPS. CONTROL RODS WITH 5/8” HEIM END AND CLEVIS FOR EACH ARM. FRAME BRACKETS AND ASSORTED BOLTS.
Franklin Halibrand Left Side Caliper 8101L $540
Franklin, Halibrand Right Side Caliper 8101R $540
Winters Left Side Caliper 8180L $540
Winters Right Side Caliper 8180R $540
MODIFIED WATTS LINKAGE PARKING BRAKE COMBINATION KITS INCLUDE: ALL OF THE WATTS LINKAGE PARTS PLUS PARKING BRAKE PARTS AND A BRACKET FOR THE CABLE
Plus Features: The complete Watts Linkage, is very compact with the Brake and Cable fitting neatly together. Order Cable without Bracket for further savings. (Specify frame width or style. Specify drive shaft centered or housing centered.)
DESCRIPTION U BOLT SPACING PART # PRICE
8” FORD 1 9/16” x 2 31/32” 8040 $540.009” FORD 1 7/16” x 2 29/32” 8100 $540.009” FORD 1 7/16” x 3” 8120 $540.009” FORD 1 7/16” x 3 1/4” 8125 $540.009” FORD 1 9/16” x 2 31/32” 8140 $540.009” FORD 1 9/16” x 3 1/4” 8160 $540.009” FORD 2 3/4” x 3” 8170 $540.00
!31
303-688-6882 FAX: 303-660-4660 WEB: TSMMFG. NET
4321 WILLOW CREEK ROAD CASTLE ROCK CO 80104-9766
NAME______________________________________
STREET____________________________________
CITY______________________________________
STATE__________ZIP________________________
TELEPHONE (______)________________________
EMAIL____________________________________
DATE_____________________________________
NAME____________________________________
STREET___________________________________
CITY______________________________________
STATE__________ZIP________________________
TELEPHONE AT THIS LOCATION (______)___________________________________
SHIP
TO
GIVE COMPLETE ORDERING INFORMATION
QUANTITY PART # NAME OF ITEM PRICE EACH TOTAL PRICE
SUBTOTAL
4% SALES TAX (COLO., ONLY)
FREIGHT (PLEASE CALL FOR PRICE)
TOTAL
!32
ORDERING INFORMATION
TERMS Cash with order, Visa or MasterCard. Personal checks will delay order until the check clears the bank. The best ways to send money are: Postal Money Order, Express Money Order, Bank Money Order, Bank Draft, Cashiers Check, or Certified Personal Check.
All foreign shipments require full payment in advance. Complete mailing address required .... Box #s are not acceptable.
PRICES Prices are subject to change without notice. Price changes are due to manufacturers and material costs fluctuating. In the event of extreme increases, you will be notified promptly, before we ship. If there is a slight increase or decrease, your parts will be shipped at the new price.
ORDERING For fast service, you may order online tsmmfg.net, call (303) 688-6882, fax (303) 660-4660, or mail order to TSM MFG. CO., INC. 4321 Willow Creek Road, Castle Rock, Colorado 80104-9766. Use part # and description on each item.
SHIPPING Unless you specify, orders will be shipped via U.P.S. all orders shipped F.O.B. Castle Rock, Colorado. (You pay the freight).
CLAIMS Delivery of all merchandise is the responsibility of the carrier. Always check the condition of the merchandise, shipping container and packing slip in the presence of the delivery agent. This insures prompt action, should any claims need to be filed for damaged or broken parts. Remember, YOU must file the claim with the delivering carrier.
RETURNS Should you receive a defective item, or have a problem, all efforts will be made to correct the problem. Please contact us for authorization before returning any merchandise. All returned merchandise is subject to a 15% restocking fee. Shipping and Handling charges are non-refundable. Merchandise is not refundable if modified or in non-resalable condition. Return shipments must be sent freight prepaid, and must have a copy of your receipt. All sales final after 30 days.
WARRANTY The following is made in lieu of all warranties expressed or implied. Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable for any loss, injury or damage, direct or consequential, arising out of the use of, or inability of the product. After use, the user shall assume all risk and liability whatsoever in connection therewith.
!33
PART # DESCRIPTION PRICE5001 SMALL $20.00
5002 MEDIUM $20.00
5003 LARGE $25.00
5004 X-LARGE $25.00
5005 XX-LARGE $30.00
