nelson stud welding - chucks - stud weld gun imperial dimension chucks

2
Visit our website NelsonStud.com for 101 a list of our standard stock products. Nelson Stud Welding, Inc. Phone: 1-800-NEL-WELD 7900 West Ridge Road 1-800-635-9353 Elyria, Ohio 44035 Email: [email protected] Nelson Stud Welding reserves the right to modify and amend product descriptions and material specifications. To confirm accuracy of information contained within, please consult with your nearest representative at 1-800-635-9353. ACCESSORIES NELSON STUD WELDING SPECIFICATION Stud Weld Gun Imperial Dimension Chucks Chucks Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both imperial and metric dimensions so that the difference in size between two chucks can be easily compared. This will indicate if the stud will be tight or loose in an alternative chuck. The lengths given are the overall chuck lengths. Chucks for use with Standard Stud Weld Guns Chuck Description Stud Diameter Length (inches) Chuck Part Number Type Imperial Dimension Metric Dimension #4 0.112 2.84 2-5/8 500001135 1 1/8” and 11 ga. 0.125 3.17 2-5/8 500005001 #6 and 10 ga. 0.134 3.40 2-5/8 500001002 5/32 0.156 3.96 2-5/8 500001003 #8 and 8 ga. 0.164 4.17 2-5/8 500001006 3/16” and#10 0.187 4.76 2-5/8 500001005 7/32 and 1/4-20 pitch 0.218 5.54 2-5/8 500001004 1/4 0.250 6.35 2-1/4 500001007 2 5/16-18 pitch 0.275 6.98 2-1/4 500001008 5/16 0.312 7.92 2-1/4 500001009 3/8-16 pitch 0.330 8.38 2-1/4 500001010 3/8 0.375 9.53 2-1/4 500001011 7/16 0.437 11.10 2-1/4 500001012 1/2-13 pitch 0.448 11.38 2-1/4 500001013 1/2 0.500 12.70 2-1/2 500001014 3 9/16 and 5/8-11 pitch 0.562 14.27 2-1/2 500001015 5/8 0.625 15.87 3 500001016 3/4-10 pitch and 11/16 0.680 17.27 3 500001245 3/4 0.750 19.05 3 500001018 7/8 0.875 22.23 3 500001019 Types 1-3 #2 Morse Taper Mounting

Upload: stefan-ionita

Post on 05-Nov-2015

39 views

Category:

Documents


8 download

DESCRIPTION

Nelson Stud Welding - Chucks - Stud Weld Gun Imperial Dimension Chucks

TRANSCRIPT

  • Visit our website NelsonStud.com for 101

    a list of our standard stock products.

    Nelson Stud Welding, Inc. Phone: 1-800-NEL-WELD 7900 West Ridge Road 1-800-635-9353 Elyria, Ohio 44035 Email: [email protected]

    Nelson Stud Welding reserves the right to modify and amend product descriptions and material specifications. To confirm accuracy of information contained within, please consult with your nearest representative at 1-800-635-9353.

    ACCESSORIES

    NELSON STUD WELDING SPECIFICATION Stud Weld Gun Imperial Dimension Chucks

    Chucks

    Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both imperial and metric dimensions so that the difference in size between two chucks can be easily compared. This will indicate if the stud will be tight or loose in an alternative chuck. The lengths given are the overall chuck lengths.

    Chucks for use with Standard Stud Weld Guns

    Chuck Description

    Stud Diameter

    Length (inches)

    Chuck Part Number Type

    Imperial Dimension

    Metric Dimension

    #4 0.112 2.84 2-5/8 500001135

    1

    1/8 and 11 ga. 0.125 3.17 2-5/8 500005001

    #6 and 10 ga. 0.134 3.40 2-5/8 500001002

    5/32 0.156 3.96 2-5/8 500001003

    #8 and 8 ga. 0.164 4.17 2-5/8 500001006

    3/16 and#10 0.187 4.76 2-5/8 500001005

    7/32 and 1/4-20 pitch 0.218 5.54 2-5/8 500001004

    1/4 0.250 6.35 2-1/4 500001007

    2

    5/16-18 pitch 0.275 6.98 2-1/4 500001008

    5/16 0.312 7.92 2-1/4 500001009

    3/8-16 pitch 0.330 8.38 2-1/4 500001010

    3/8 0.375 9.53 2-1/4 500001011

    7/16 0.437 11.10 2-1/4 500001012

    1/2-13 pitch 0.448 11.38 2-1/4 500001013

    1/2 0.500 12.70 2-1/2 500001014

    3

    9/16 and 5/8-11 pitch 0.562 14.27 2-1/2 500001015

    5/8 0.625 15.87 3 500001016

    3/4-10 pitch and 11/16 0.680 17.27 3 500001245

    3/4 0.750 19.05 3 500001018

    7/8 0.875 22.23 3 500001019

    Types 1-3

    #2 Morse Taper Mounting

  • Nelson Stud Welding, Inc. Phone: 1-800-NEL-WELD 7900 West Ridge Road 1-800-635-9353 Elyria, Ohio 44035 Email: [email protected]

    Nelson Stud Welding reserves the right to modify and amend product descriptions and material specifications. To confirm accuracy of information contained within, please consult with your nearest representative at 1-800-635-9353.

    Visit our website NelsonStud.com for

    a list of our standard stock products.

    102

    ACCESSORIES

    NELSON STUD WELDING SPECIFICATION Stud Weld Gun Imperial Dimension Chucks (Continued)

    Chucks

    Chucks for use with Standard Stud Weld Guns (Continued)

    Type 4

    #2 Morse Taper Mounting

    Type 5

    1/2-20 Thread Mounting

    Chuck Description

    Stud Diameter

    Length (inches)

    Chuck Part Number Type

    Imperial Dimension

    Metric Dimension

    1 1.000 25.40 3-5/8 500001085

    4

    A 1 Body 500001110

    B 1 Sleeve 500000111

    1-1/8 1.125 28.57 3-5/8 500001086

    A 1-1/18 Body 500001113

    B 1-1/8 Sleeve 500001114

    1-1/4 1.250 31.75 3-5/8 500001088

    A 1-1/4 Body 500001117

    A 1-1/4 Sleeve 500001118

    1-3/8 1.375 34.93 3-5/8 500001091

    A 1-3/8 Body 500001121

    A 1-3/8 Sleeve 500001120

    1-1/2 1.500 38.10 3-5/8 500001093

    A 1-1/2 Body 500001123

    A 1-1/2 Sleeve 500001124

    1-5/8 1.625 41.27 3-5/8 500001424

    A 1-5/8 Body 500001425

    A 1-5/8 Sleeve 500001426

    1-3/4 1.750 44.45 3-5/8 500001095

    A 1-3/4 Body 500001115

    A 1-3/4 Sleeve 500001116

    5