naudin pantone
TRANSCRIPT
ExhaustIntake
12" x 1" Black Pipe Nipple (painted)
12" x 1/2" Steel Rod
1" x 1/2" x 1/2" Galvanized Reducing Tees (Ward - best)
" Copper Tubing (* 5/8")
1/2" Brass Flare Nuts (* 5/8")
The Plasm
Engine
22mm / 7/8" Copper Oil Drain Plug Washers
The FREE GEET 5kW Fuel Procesdrawing by JL Naudin - 11-11-99 -updated: 09-Email: [email protected] - Web site: http://The full explanations about the construction hasthe GEET web site at : http://www.friend.ly.net/Gand also at : http://jnaudin.free.fr/geet/html/geet( Courtesy of Paul & Molley Pantone - update c
North Pole
1/2" Galvanized Pipe Tees Cauti
16 7/16" x 1/2" Black Pipe - (Cut + Threaded)
During the 20 minutes of "burn-in time" the engine must be oriented so as the reaction chamber in w is entering is facing to magnetic North
The side where the fuel enter is facing South.
Air mixture valve
1" x 1/2" x 1/2" Galvanized Reducing Tees (Ward - best)
1/2" Galvanized Pipe Tees
1/2" NPT Ball Valves (B&K - best)
The BUBBLER
ma endothermic REACTOR
22mm / 7/8" Copper Oil Drain Plug Washers
Exhaust
ssor diagram -21-00 /go.to/jlnlabs/s been freely published inGEET/plans.htmtplans.htm
courtesy of Bob Colvin )
South Pole
ion : Hot Temperature
The pyrolytic chamber
1 gallon Anti-Freeze Jug
1/2" NPT Ball Valves (B&K - best)
which the exhaust
Auxiliary bubbler valvefor non-petroleum fuels