nasa - aeronautical structures manual
DESCRIPTION
NASA - Aeronautical Structures ManualTRANSCRIPT
-
Section C3.0December 15, 1970Page 6 "_ _.
nominally identical specimens have larger scatter and fall below the
theoretical values.
Another source of discrepancy is the dependence of buckling
loads of cylindrical shells on edge values of longitudinal and circumferential
displacements or forces. Also, because tangential edge conditions have not
usuaUy been precisely controlled in buckling tests, some of the scatter of
test results can be attributed to this source. Current methods of establishing
design data tend to treat both initial imperfections and edge conditions as
random effects. Results from all available tests are considered together
without regard to specimen construction or methods of testing and are
analyzed to yield lower bound or statistical correction factors to be applied
to simplified versions of the theoretical results. This tochnique has proved
satisfactory to date for design purposes.
Within the limitations imposed by the state of the art, acceptable
procedures for the estimation of critical loads on circular cylindrical ....
shells are described in this section.
3.I.I ISOTROPIC UNSTIFFENED CYLINDERS.
Unsttffened isotropic circular cylinders subjected to variousconditions of loading are considered below.
3. I. I. 1 Axial Compression -- Unpressurized.
The desi_u allowable buckling stress for a circular cylinder
subjected to axial compression is given by
0 X
cr _- 7E t/r (I)_1 4 3 (1-_ _)
0 Xcr Et
- 0.6_/ _ (for _ =0.3)r
-
asm-A100asm-A200asm-A300asm-A400asm-B100asm-B200asm-B300asm-B400asm-B450asm-B455asm-B456asm-B457asm-B458asm-B459asm-B460asm-B470asm-B480asm-B500asm-B600asm-B700asm-B710asm-B712asm-B720asm-B722asm-B730asm-B734asm-B800asm-B830asm-B840asm-B900asm-B940asm-B970asm-B972asm-C100asm-C150asm-C200asm-C220asm-C300asm-C310asm-C320asm-C330asm-C340asm-C400asm-D100asm-D300asm-D323asm-D370asm-D380asm-D400asm-D500asm-D600asm-E100asm-E130asm-E150asm-E200asm-E240asm-F100asm-F120asm-F200asm-G100asm-H100asm-H120