MV-10

www.dok-ing.com

The MV-10 Double Tool Mine Clearance System is designed to clear various types of terrain containing antipersonnel (AP) mines, antitank (AT) mines, and unexploded ordnance (UXO).

The operating tools for digging and mine clearance consist of a flail tool attachment and tiller tool attachment, or a double flail tool attachment. These are fi xed in front of the system and are specifi cally designed to detonate or destroy the mines and UXO as the MV-10 moves forward.

The MV-10 is designed to perform one task only - mine clearance. It is not a modifi ed construction machine or tank, it is original double tool system for humanitarian demining.

Designed formine clearance

02 / DOK-ING MV-10

SAFETY RIDES FIRSTThe MV-10 system weights up to 20 tons, based on its confi guration, with excellent cross country performance. It is controlled by a single operator through a remote control unit. This system provides the best possible protection for the operator. By ensuring the operator is well clear of the MV-10 or inside a protected vehicle, we can be certain that

DOK-ING MV-10 / 03

READY TO USE RIGHT AWAYOnly few minutes are required to unload the MV-10 from any transportational asset and to begin with mechanical clearance activities.

The MV-10 requires no special preparation activities or additional personnel.

should a mine (particularly anti-tank) be detonated, people will be protected from even minor injuries or health issues that can arise from being in close proximity to the blast.

Only one operator and two mechanics are required for transport, operation and repairs/maintenance.

MV-10 at glance

04 / DOK-ING MV-10

HARDOX Deflector• Resistant to explosions of AP and AT mines• Protects MV-10 from damage• Reduces the dispersal area of exploded mines

Remote control aerial• Operational range: 1500 m in the line of sight

Standard Tool• Flail (front) & Tiller tool (back)

Additional Tool Attachments• Blade/gripper tool• Roller tool

Blade/gripper tool Roller tool

DOK-ING MV-10 / 05

Machine armor plates of special steel resistant to:• Wear• Fragments of exploded mines• Standard ammunition

Standard Remote Control Unit• Operational range: 1500 m in the line of sight• Complete control of all functions• Battery capacity: 16 hours

Deep profi le tracks• Can be equipped with track pads suitable for driving on hard surfaces

Electronic components• Sealed - completely protected from dust, humidity, water and temperature

Lifting points

06 / DOK-ING MV-10

PROTECTIONThe MV-10 Double Tool Mine Clearance System is clad with the special Swedish HARDOX 400 armor plates. The MV-10 is therefore highly resistant to the fragmentation of landmines.

The experience has shown that, when working properly, when an anti-tank mine is detonated, there is no permanent damage to the working tools of the MV-10 system.

DOUBLEEFFECTIVENESSBecause of its dimensions, excellent maneuverability, high engine power, and low track-ground pressure, the MV-10 can work year round in almost all conditions(-19ºC - +54ºC, 100% relative humidity), and it is not susceptible to damage by rain, snow or hail.

The MV-10 normally uses both tools - a rotating flail tool, designed to activate or shatter AP and AT mines, and rotating tiller tool, designed as a secondary activation method and at the same time to keep the digging depth constant. A flail and tiller unit can also work one at a time and rotation of tools is forward and backward.

SIMPLE TRANSPORTRoad transport of the MV-10 is done using a standard flat-bed trailer. The MV-10 system can also be transported within the C-130 Hercules. For transport by sea, it can be restrained in similar ways to road transport plus it has lifting points to enable it to be craned aboard.

POST SALE SERVICESTRAINING

DOK-ING has a vast experience in landmine clearance of various types of terrain. The acquired knowledge, expertise and experience are being passed over to the new ‘MV-10 teams’ so that they can as soon as possible start with safe and effi cient landmine clearance activities. DOK-ING’s standard training course lasts 2 weeks, either in Croatia or in countries where the MV-10 systems will be used. Because of the short training period for personnel, education costs for MV-10 operators are extremely low.

DOK-ING MV-10 / 07

MAINTENANCE

The MV-10 is easily accessible for inspection, maintenance, trouble-shooting, repair and/or replacement. Maintenance and repairs can be carried out on the fi eld or in workshop conditions. The tools required for repairs and maintenance are standard wrenches and additional specially modifi ed tools. Damage resulting from AP or AT mine detonations is usually minor in nature and can be corrected with a minimum expenditure of time and materials.

SPARE PARTS

As a commitment to providing a high quality service to our customers, DOKING maintains adequate stocks of parts on our premises, has its own in-house service capabilities and can send a team at short notice to any location in the world.

DOK-ING Ltd.Kanalski put 1, 10000 Zagreb, CroatiaT +385 1 2481 300 / F +385 1 2481 303info@dok-ing.com / www.dok-ing.com

MV-10 TECHNICAL CHARACTERISTICSDimensions (L x W x H)

Prime mover 4606 x 2240 x 2100 mm

Prime mover with tool 7226 x 2975 x 2129 mm

MV-10 Ground Clearance

Up to bottom armor protection 390 mm

Weight

Prime mover 15.5 metric tons

Prime mover with flail/tiller tool 20 metric tons

Engine

Caterpillar C18 6-cylinder, in-line, turbo-charged diesel 4-stroke, direct injection, water cooled

Power rating 571 kW (766 HP) at 2100 rpm

Direction of rotation Clockwise

Torque 3450 Nm at 1400 rpm

Engine weight 1673 kg

Coolant 60 liters

Oil 68 liters

Fuel capacity 480 liters

Fuel consumption 25 - 50 liters/hour

Power transmission

Power transmission Hydrostatic system

To tracks and flail Independent drives for propulsion and flail operation

Hydraulic fluid 430 liters

Track gearbox oil 2 x 2 liters

Working (clearance) speed 0 - 3 km/hour

Maximum transport speed 10 km/hour

Flail rotation velocity 0 - 800 rpm

Tiller rotation velocity 0 - 350 rpm

Gearbox

Gearbox oil 5.5 liters

Mine cleararing capacity

Clearing width 2450 mm

Average depth 350 - 600 mm

Clearing capacity Up to 7000 m²/h

7826

210

0

2975

224

0

7226