· staff must maintain car according to ‘car maintenance list ... with the installation of...
TRANSCRIPT
www.unionkr.com
COPYRIGHT© 2013 UNI-ON.CO.KR ALL RIGHT RESERVED
UNI:ON provides our clients with all services related to Shipping, Shipbuilding,
Off-shore and Plant at Domestic and Foreign shipyards or ports. In the initial stage do our
company history, We dealt with many companies that resided at shipyards (SAMSUNG, DAEWOO
and HYUNDAI and Korean shipyards) to provide them with shipping agents, accommodations,
vehicles, and miscellaneous services.
Based on these experiences, we were born again as “UNION CO., LTD.” and we would like to be
a total-agent company for your success and prosperity provided with our best care.
UNI:ON looks forward to supporting you for the successful completion of your project.
Introduction
GENERAL SERVICE
TECHNICAL SERVICE
Accommodation
Transportation
Procurement
Forwarding Service
Relocation Service
Manpower (Expat+Local)
Fabrication
Commissioning
Modification
Shipping Agency
Operation Field Supply
& Support (Long Term)
HSE Policy
HSE POLICY
The purpose of UNI:ON HSE Policy is to protect and respect all living beings and environment,
which is the essence of our mission.
Our management recognizes our HSE policy as the most effective management tool.
Furthermore, our employees accept and apply the HSE procedures and instructions in their daily
work.
Our HSE guidelines can be summarized as follows;
● We take proactive measures to prevent accident.
● We prepare reactive measures in order to minimize the possible
effects of casualties.
● We record accidents to obtain meaningful and beneficial outcomes.
● We practice internal audits for HSE.
● We plan and practice HSE trainings for employees.
● We understand the HSE policies and targets of our customs.
● We control the waste originating from our activities in order to
minimize the environmental impacts.
● We optimize the utilization of resources and energy.
● We ensure that any new businesses and projects that we employ
will agree with HSE policy.
● We arrange, maintain and develop our working environment in
compliance with healthy working conditions.
● We all undertake to act in accordance with our HSE policy as
started above.
About Safety
UNI:ON always overemphasize the value of HSE.
Every action of UNI:ON staff, car, accommodation follow our work guide book which is focused
on Safety.
Following is its brief example.
Staff
● Establishment of Strict Regulation per each Service Category.
● Training for strict regulation for each service.
● Obtain material for use in safety training.
● Training for proper PPE use.
● Prepare training plan.
● Develop and give induction and specific training courses.
● Develop material for regular toolbox talks.
● Coordinate with Company manager and ensure Company’s mandatory courses are attended by the required
personnel.
● Defensive and Active Driving Training.
Accommodation
● Staff must check proper operation of safety equipments before hand-over.
● Staff must check and inform the ‘Fire plan’. This plan should be attached on visible area clearly.
Car
● Staff must checks insurance and registration condition before delivery.
● Both papers should be furnished in car.
● Staff must checks car safety kits (Emergency contact sticker, Fire extinguisher, First aid kits Camera, etc) before
delivery and regularly.
● Staff must give major control instruction for the car before leave.
● Staff must maintain car according to ‘Car Maintenance List’ for oil, Tires, etc.
Shuttle Service
● Driver must maintain bus according to ‘Car Maintenance List’ for Oil, Tires, and seatbelts etc.
● Driver must keep Speed Limit of road and traffic regulations.
● Driver must not drive if all passengers do not fasten their seat belt.
Services
General Shipping Agent
Service Ports
Our shipping agency services cover not only new building
projects but also loading / unloading / repair / lay-up vessels in
major ports in Korea.
- Hyundai Heavy Industries, Ulsan
- Hyundai Mipo Dockyard, Ulsan
- Samsung / DSME Shipyard, Geoje
- Sungdong / SPP shipyard, Tongyoung
- Shanghai / Weihai / Dalian, China
Service Scope
- Initial Set-up
- Visa Documentation
- Arranging Site Office
(Internet, Networking and Office facilities)
- Accommodation / Residence
- Immigration Formalities (Alien card, Re-Entry Permit)
- Forwarding of Personal Effects and Site Equipment
- Crew and Commissioning Member Handling
- Crew Pick-Up Service from Airport to Hotel
- Hotel with Meal Service
- Shuttle Service (Hotel - Ship)
- Medical Attendance
- Sailing Clearance
- Regular Formalities
- Paying Port Charge
- Arranging Pilot / Pilot Boat / Tug Boat / Line Handling Men
Others
- Crew Visa Handling
- Fresh Water / Bunker
- Initial Supply (Store / Spare / Provisions)
Services
Accommodation services
Accommodation
UNI:ON offers a wide range of fully furnished and equipped
apartment, with both company serviced apartment & privately
owned apartments are available.
Company owned apartment include:
- Pool & gym facilities
- Child minding services
- Family tours & local orientation
- House keeping & laundry service
- 24/7 Emergency & Security service
- Management of utilities
Additional services
- Relocation service: Transportation of personal goods,
arrange school enrollments & bus, medical attendance,
culture & Korean language lessons
- Visa support & Alien registration card services
- Car rental
- Defensive driving course
- Driver’s license support service
- Mobile phone hire: inc. bill &
international call management service
- Office & IT support services
- Social activities & team building
- Other miscellaneous services
Services
Manpower
To provide outstanding human resources to our Customer stably,
UNI:ON is carrying forward a collaborative partnership with
reliable HR companies. These companies take care of both local
& expatriate HR service and UNI:ON supports their visa
application, payroll, taxation etc at locally.
Specializing in supply of contractors in the following disciplines:
- QA/QC & Inspection services
- Design, Construction & Commissioning
- Administration, document control & IT
- Planning & Project Management
- Health, Safety & Environment (HSE)
- Preservation & Storage
- Drivers
Pick-up services
UNI:ON provides various pick-up services such like Airport
pick-up, Daily pick-up to work site, Bus operation for shuttle
service etc.
Taxation
As a long time partner of UNI:ON,
YNTA (Youngnam Taxpayers Association) is one of best
solution for payroll tax. YNTA provides accurate information to
our Taxpayer so help him to pay reduced tax payments.
Services
Forwarding
UNI:ON have prepared procedures for immediate notification to
Customers of air import related procedures, delivery schedules,
and flight number and fare information.
Through a close cooperative relationship with overseas branches and
partners, we are providing competitive rates and achieving fast shipping.
As the shipment proceeds, we provide notification prior to its arrival,
and when reporting customs EDI, we deliver to the warehouse of
your choice.
For customers that need it, we provide the fastest and most economical
door to door service, from the arrival of cargo, to customs procedures,
on the date that the customer’s requests.
Through our KTNET system, IAF provides direct confirmation of
shipment information from arrival to warehousing to delivery
from the warehouse.
Services
Procurement
Wide range of subcontractor are working for UNI:ON.
UNI:ON collects these various information and provide to our customer with most cost-effective price.
Once Customer requests, our supply system will answer with precise quotation within 2 working days at
farthest. All these supplies & fabricated materials are follow the international Standard or equivalent certifi-
cates.
Engine & Deck General Stores
- Electric Goods
- Tools & Equipment
- Hoses and Coupling
- General Expendables (Soap, Soap Powder, etc.)
- Kitchen Utensils
Wire & General Rope
- Polyphyline and Polyethylene Rope
- Nylon Rope
- Vinylone Rope
- Multi Rope
- Various Wire Ropes
Pipe coupling
- Handling pipe coupling for various repairs,
high pressure pipe coupling
Legal Equipment
- Personal Protective Equipment
- Inspection For Life Boat & Lift Raft & Equipment
- Fire Fighting System & Equipment
- Various Gas Detector
- Safety Equipment
Ship Stevedoring Equipment
- Cargo Lashing Gears (shackle, blocks)
- Container Lashing Gears
- Insulating Material
- Chain, Anchor
- Lashing Bends (automobiles) & Car Lashing
materials
Services
Engineering
Structural/Manufacturing
- Basic Drawing & Spec Review
- Scantling Plan
- Construction Design
- 3D Modeling
- Assembly Drawings
- Interface & Clash Check
- Stress Analysis
Machinery/Piping
- Conceptual Design
- Basic Design
- Functional Description
- Piping System Calculation
- Heat & Material Balance
- P&ID Development &
Preparation
- Machinery Arrangement
- 3D Modeling
Electrical/Instrument
- Basic Design
- Load Analysis
- Single Line Diagram
- Block Diagram &
Connection Diagram
- Functional Description
- IACS, F&G, ESD System
- C&E Diagram
- DP System
- Navigation/
Communication System
Services
Commissioning
UNI:ON Co., Ltd offers highly qualified engineers to ensure commissioning projects can be completed
in time and within the allotted budget. We support in development of FAT, preparations and procedures,
monitoring and expediting MC process, FSR mob scheduling, implementation of CP, FSR coordination
etc.
Basic Block Diagram Commissioning Process
Services
Flushing
Flushing of Piping is carried out in order to remove mud, sand, cement, welding slag, loose foreign materials,
sludge & iron pieces etc. in to the pipe, generated during manufacturing, fabrication, transportation,
erection & construction.
In addition, the benefit of flushing will increase a significant life time of equipment and fully support a
successes of commissioning due to decontamination in the system and great support the equipment war-
ranty claim. A flushing method is purposed to minimized a possibility re-contamination during all processes
Water Flushing
Clean up the piping with water to remove welding Slug, Grit, Sanding, Tresh, dirt, loose scale other debris
and foreign material.
Water Jet is for large piping (larger than 6 inch in diagram) in which the flow is not enough with Circulation
Pump.
Pneumatic Flushing
Pneumatic Flushing is for piping which is not suitable for water flushing. In this case, flush the piping with air
instead of water. *minimum pressure - 4.92kg/cm2(70psig)
Pig flushing
After Water-jet flushing & Circulation, to remove remained water & dry up some pieces which is hard to dry
with ordinary drying method, Pig flushing is done.
Oil flushing
To remove particles inside piping, oil flushing is done. For better result, oil temperature is controlled stable
and periodically take samples to check the grade.
This enlarge lifetime of equipment, helps better condition of operation, and prevent accident.
Chemical cleaning
Services
Punch Clearing
UNI:ON punch clearing team have been involved in a number of on & off shore projects in different fields
and we provide a high quality service for all punches of E&I, Mech, piping etc. based on a thorough safety
awareness and superior technology to create the best quality of people gathered in UNI:ON.
We look forward to establishing a prosperous relationship with you and hope that bringing together will be
the first step to success.
Punch clearing process
Services
Machinery Installation
UNI:ON is providing comprehensive machine installation solutions for production machinery, industrial
plant and mechanical infrastructure. We are considered by many of our clients as the world’s experts in
machinery installation services, having demonstrated our expertise by successfully delivering many
projects over the last years and now-day.
Every machinery installation project is different.
Here are some of the typical services we undertake during an installation project:
- Decommissioning and removal of existing machinery
- Datum surveys and alignment checks
- Preparation of foundations and footings
- Floor marking and positioning checks
- Drilling and preparation of floor fixings
- Storage and transportation of machinery to site
- Heavy lifting into position utilizing our fleet of cranes, hydraulic gantries, forklifts
- Mechanical installation including any rebuilding along with the installation of guards or ancillary
equipment
- Alignment and levelling
- Installation of mechanical and electrical services and along with any ducting and ventilation systems
Organization
Services
Preservation
Preservation shall be provided to prevent the corrosion an deterioration of equipment and material from the
effects of environmental conditions during shipping, storage and construction.
Equipment & Parts shall be protected against the effects of climatic conditions such as rain, snow, freezing,
high humidity, fresh and salt water splashing, salt air, sunlight and mildew.
Admission of debris (for example, flushing water, shot blast, etc) as well as rough handling, jolting, and
impact, shall be avoided.
Equipment and parts to be preserved and protected shall include the following items. But not be limited.
● Machinery internals, bearings, seals, machined surface
● Electric motors, switchgear, transformers, cabinets, contactors, junction and splice boxes, batteries
● Instruments and associated cabinets, panels, terminal boxes
● Valve internals, stems, glands, bodies
● Flange faces, metallic gaskets, bolting, pipe threads, pipe support threaded adjusters
● Vessel and exchanger internals
● Fire and gas detection and HVAC distribution items
● External surface subject to corrosion
● Fire fighting & Life saving equipment
● All exposed machinery surface
UNI:ON is providing the preservation and protection of all equipment and materials during shipping, storage
and construction in accordance with requirements of owner specification.
Clients July .18. 2015
UNI:ON and Forerunner Companies have a good reputation in offshore oil & gas field throughout its past successful works and services to ship owners and vendors.
Reference
Reference
Project Owner Period Location Services
FLNG Projects Shell 2013~Present SHI Korea Accommodation, Manpower, General & logistic services
Drillship Projects Seadrill 2013~Present SHI, DSME Korea Accommodation, Manpower, & General logistic services
TOP PLSV Projects Odebrecht 2013~2014 DSME Korea Accommodation, Manpower, General & logistic services
LNG FSRU Projects Hoegh LNG 2012~Present HHI Korea Accommodation, Manpower, General & logistic services
PTSC FSO Project Petrovietnam 2011~2013 SDME Korea Accommodation, Manpower, General & logistic services
LNG Projects Gaslog 2011~Present SHI Korea Accommodation, General & logistic services
EGP3B Chevron Nigeria 2011~Present Lagos Nigeria Manpower, EPC, OSV supply
Pieter Schelte PLSV Project
Allseas 2011~Present DSME Korea Accommodation, Manpower, General & logistic services
Project Owner Period Location Services
South Nemba
Auxiliary DSME 2012 ~ 2014 DSME Piping Flushing & Hydro Test
Commissioning
ODN #2 Odebrecht 2011 ~ 2012 DSME Flushing (Derrick). Hydro Test Commissioning
Heerema Aegir DSME 2011 ~ 2012 DSME
Main DG Piping Flushing & Hydro Test Remote Operate Valve System Chemical
Cleaning & Oil Flushing Commissioning
ODN #1 Odebrecht 2010 ~ 2011 DSME Flushing (Derrick). Hydro Test Commissioning
T.O.P Odebrecht 2012 ~ 2014 DSME Flushing. Hydro Test, Commissioning Fabrication, Installation
CLOV Total 2012 ~ 2013 DSME Commissioning, Flushing, Hydro Test
Pre. Fabrication, Installation Pre. Commissioning
PAZFLO Total 2010 ~ 2012 DSME Commissioning, Flushing, Hydro Test
Pre. Fabrication, Installation, Pre. Commissioning
Clair Ridge BP 2014 ~ Present HHI
Flushing, ATEX Certification & Compliance, Commissioning (Electrical, Instrument & Control, Mechanical), Preservation, Con-struction Labor & Materials for OFE, Purchase & Supply of Special Commissioning Materials, MC (Punch Killing for E&I, Pipe & Structure)
Quad 204 BP 2014 ~ Present HHI
Flushing, ATEX Certification & Compliance, Commissioning (Electrical, Instrument & Control, Mechanical), Preservation, Con-struction Labor & Materials for OFE, Purchase & Supply of Special Commissioning Materials, MC (Punch Killing for E&I, Pipe & Structure)
MOHONORD0 Total 2014 - Present HHI F.O Deaeration Tank Design & Fabrication
EGINA Total 2013 ~ Present SHI
ESDG FAT, DCC, Machinery Installation, Commissioning, Expansion Tank Design & Fabrication Manpower & General
Arkutun Dagi Exxon Mobil 2013 ~ 2014 DSME Flushing. Hydro Test, Commissioning Preservation, MC (Punch Killing )
Songa Offshore #1 Songa Offshore 2013 ~ Present DSME Flushing. Hydro Test, Commissioning
Reference
Technical Services
Company Certificate
ISO 9001:2009 ISO 14001:2009 OHSAS 18001:2007
Registration for Shipping Business Interim Document of Compliance
Company Network
Head Office 4F, Dongsung Bldg., 1120-19 Suwol-Dong, Geoje-Si, Gyeongnam, Korea 656-303 TEL +82 55 638 2774 (Rep.)
FAX +82 55 688 2775 E-mail [email protected]
http://www.unionkr.com
Thank you.
Ulsan Office 3F, Daeyoung Bldg,. Ilsan-Don, Dong-Gu, Ulsan-Si, Korea TEL +10 8937 9543
E-mail [email protected]
China Office D33-5, Peace modern city, Shahekou Dist, Dalian,China TEL +86 8437 7165
FAX +86 8437 7195 E-mail [email protected]
Russia Office Office 401, #293, Komsomolskaya. Ave. Yuzhno Sakhalinsk, Russia 693020
TEL +74 242305031
E-mail [email protected]
4F, Dongsung Bldg., 1120-19 Suwol-Dong, Geoje-Si, Gyeongnam, Korea 656-303
TEL +82 55 638 2774
FAX +82 55 688 2775 [email protected]
www.unionkr.com