must have tools and equipment for volcanic …
TRANSCRIPT
MUST HAVE TOOLS AND EQUIPMENT FOR VOLCANIC MECHANIC CLASS
1. CABLE AND HOUSING CUTTERS
2. CASSETTE LOCKRING TOOL
3. CHAIN WHIP
4. CHAIN TOOL
5. CHAIN CHECKER
6. BOTTOM BRACKET TOOL (SPECIFIC TO BOTTOM BRACKET ON YOUR BIKE)
7. CRANK PULLER FOR SPLINED CRANKS
8. CHAIN RING NUT TOOL
9. PHILLIPS AND FLATHEAD SCREWDRIVERS
10. T-25 TORX WRENCH
11. NEEDLE NOSE PLIERS
12. PEDAL WRENCH
13. HEX WRENCH SET
14. TIRE LEVERS
15. ADJUSTABLE WRENCH
16. SPOKE WRENCH
17. TRAVEL STAND
18. BRAKE SET FOR HYDRAULIC BRAKES IF APPLICABLE
RECOMMENDED SHOP TOOL LIST (OPTIONAL FOR CLASS)
1. MALLET
2. RULER
3. TAPE MEASURE
4. TORQUE WRENCH
5. SOCKET AND BIT SET
6. 8MM HEX PEDAL WRENCH
7. P HANDLE HEX WRENCHES
8. 2, 2.5, 3 MM HEX Y WRENCH
9. 4, 5, 6 MM HEX Y WRENCH
10. CONE WRENCH SET
11. ROTOR TRUING FORK
12. MAGNET
13. FLOOR PUMP
NICE TO HAVE SHOP TOOL LIST
1. SPOKE TENSION METER
2. WHEEL ALIGNMENT GAUGE OR DISHING TOOL
3. THREADLESS SAW GUIDE
4. HACK SAW
5. TAP AND DIE SET
6. DRILL
7. THREADLESS NUT SETTER
8. HEADSET PRESS
9. HEAD CUP REMOVER
10. CROWN RACER SETTER
11. CROWN RACE REMOVER
12. AIR COMPRESSOR
PATROL TOOL SET
1. MULTI-TOOL WITH CHAIN TOOL
2. TIRE LEVERS
3. PATCH KIT
4. HAND PUMP
5. SPARE TUBE
6. SPARE CHAIN OR QUICK LINK
*Please refer to tool list for Recommended, Nice to have, and Patrol Tool set
All items can be purchased through Volcanic and shipped to our facilities before your arrival. Send the order with the
tool name and quantity needed. Please review Suggested tool kits from Park Tool. Please provide Volcanic Bikes with a
list of tools needed so we may build an order with pricing and special mechanics class discounts.
Tool orders must be submitted no later than MONDAY AUGUST 1st, 2016. Via [email protected] or
509-427-8623*Pictures above are only references and we are able to get most brands if you have a preference.
Want to bring your bike? Order this travel case for the plane or future shipping needs. Retail $350 plus shipping.
Discounts may apply when shipping 2 or more. Bike Case Instructions .pdf
AK-2 FEATURES MSRP $305
ADVANCED MECHANIC TOOL KIT
KIT INCLUDES:
*ITEMS IN YELLOW ARE ON THE MUST HAVE TOOLS LIST
*ITEMS IN BLUE ARE ON THE RECOMMENDED TOOL LIST
BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups – Instructions
BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive – Instructions
BO-2 Bottle Opener
CC-3.2 Chain Wear Indicator – Instructions
CM-5.2 Cyclone Chain Scrubber – Instructions
CN-10 Professional Cable and Housing Cutter – Instructions
CNW-2 Chainring Nut Wrench - Instructions
CT-3.2 Chain Tool – Instructions
CWP-7 Compact Crank Puller – Instructions
DCW-1 Double Ended Cone Wrench: 13/14mm (2)
DCW-2 Double Ended Cone Wrench: 15/16mm (2)
DCW-3 Double Ended Cone Wrench: 17/18mm
FR-5 Cassette Lockring Tool – Instructions
GP-2 Super Patch Kit – Instructions
GSC-1 GearClean Brush
HXS-1.2 Professional L-Shaped Hex Wrench Set
MLP-1.2 Master Link Pliers – Instructions
PAW-12 12" Adjustable Wrench
PW-3 Pedal Wrench – Instructions
RR-12 Tape Measure
SD-SET Shop Screwdriver Set of 4
SR-11 Sprocket Remover/Chain Whip 5-to 11-Speed Compatible – Instructions
SW-0 Precision Spoke Wrench: .127" – Instructions
SW-2 Precision Spoke Wrench: .136" – Instructions
TB-2 Tire Boot (2) – Instructions
TL-1.2 Tire Lever (3) – Instructions
TWS-3 Torx® Compatible 3-Way Wrench
Soft Bristle Soaping Brush
High Pressure Inflation Gauge
Items needed for Class not in AK-2 Set: (See tool list)
Needle Nose Pliers
Travel Stand
*All items can be purchased individually and can be directly shipped to Volcanic before your arrival. Volcanic will also
ship your purchased items to your department upon departure. Purchaser is responsible for shipping costs if you choose
to have Volcanic ship them.
Tool orders must be submitted no later than MONDAY AUGUST 1st, 2016. Via [email protected] or
509-427-8623
EK-2 FEATURES MSRP $661.46
TRAVEL AND EVENT KIT
KIT INCLUDES:
*ITEMS IN YELLOW ARE ON THE MUST HAVE TOOLS LIST
*ITEMS IN BLUE ARE ON THE RECOMMENDED TOOL LIST
ATD-1 Adjustable Torque Driver
AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm
BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups – Instructions
BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive – Instructions
BO-2 Bottle Opener
CC-3.2 Chain Wear Indicator – Instructions
CCW-5 Crank Bolt Wrench: 14mm and 8mm
CN-10 Professional Cable and Housing Cutter – Instructions
CNW-2 Chainring Nut Wrench - InstructionsCP-1 Chain Whip Pliers
CT-3.2 Chain Tool – Instructions
CWP-7 Compact Crank Puller - Instructions
DCW-1 Double Ended Cone Wrench: 13/14mm (2)
DCW-2 Double Ended Cone Wrench: 15/16mm (2)
DCW-3 Double Ended Cone Wrench: 17/18mm
FR-5H Cassette Lockring Tool with Handle: Shimano®, SRAM®, Sun Race®
GSC-1 GearClean Brush
HCW-15 36mm/32mm Headset Wrench
HMR-4 Shop Hammer
HT-8 8mm Hex Tool
HXS-1.2 Hex Wrench Set
MLP-1.2 Master Link Pliers – Instructions
MW-8 Metric Wrench: 8mm
MW-9 Metric Wrench: 9mm
MW-10 Metric Wrench: 10mm
PAW-12 12" Adjustable Wrench
PW-4 Professional Pedal Wrench
RR-12 Tape Measure
SD-SET Shop Screwdrivers (Set of 4)
SW-0 Precision Spoke Wrench: .127" – Instructions
SW-1 Precision Spoke Wrench: .130”
SW-2 Precision Spoke Wrench: .136" – Instructions
SZR-1 Shop Scissors
TL-6.2 Steel Core Tire Levers (Set of 2)
TWS-1 Torx® Compatible Wrench Set
Items needed for Class not in EK-2 Set: (See tool list)
Needle Nose Pliers
Travel Stand
*All items can be purchased individually and can be directly shipped to Volcanic before your arrival. Volcanic will also
ship your purchased items to your department upon departure. Purchaser is responsible for shipping costs if you choose
to have Volcanic ship them.
Tool orders must be submitted no later than MONDAY AUGUST 1st, 2016. Via [email protected] or
509-427-8623
PK-2 FEATURES MSRP $727
PROFESSIONAL TOOL KIT
KIT INCLUDES:
*ITEMS IN YELLOW ARE ON THE MUST HAVE TOOLS LIST
*ITEMS IN BLUE ARE ON THE RECOMMENDED TOOL LIST
ATD-1 Adjustable Torque Driver
AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm
AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm
BBT-5/FR-11 Bottom Bracket/Cassette Lockring Tool for Campagnolo® (12-tooth)
BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups – Instructions
BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive – Instructions
BCB-4.2 Bike Cleaning Brush Set
BO-2 Bottle Opener
CBW-1 Open End Wrench: 8/10mm
CBW-4 Open End Wrench: 9/11mm
CC-3.2 Chain Wear Indicator – Instructions
CCP-22 Crank Puller for Square Taper Cranks
CCP-44 Crank Puller for Splined Cranks
CCW-5 Crank Bolt Wrench: 14mm and 8mm
CM-5.2 Cyclone® Chain Scrubber – Instructions
CN-10 Professional Cable and Housing Cutter – Instructions
CNW-2 Chainring Nut Wrench - Instructions
CP-1 Chain Whip Pliers
CT-3.2 Chain Tool – Instructions
DAG-2.2 Derailleur Hanger Alignment Gauge – Instructions
DCW-1 Double Ended Cone Wrench: 13/14mm
DCW-2 Double Ended Cone Wrench: 15/16mm
DCW-3 Double Ended Cone Wrench: 17/18mm
DH-1 Dummy Hub – Instructions
DP-2 Threaded Dummy Pedal – Instructions
FR-5 Cassette Lockring Tool: Shimano®, SRAM®, Sun Race® – Instructions
GP-2 Super Patch Kit – Instructions
HCW-15 36mm/32mm Headset Wrench
HMR-4 Shop Hammer
HT-8 8mm Hex Tool
IR-1 Internal Cable Routing Kit – Instructions
MLP-1.2 Master Link Pliers – Instructions
NP-6 Needle Nose Pliers
OBW-4 Offset Brake Wrench
PAW-12 12" Adjustable Wrench
PH-1 P-Handled Hex Wrench Set of 8 with Holder – Instructions
PW-4 Professional Pedal Wrench
SBC-1 Spoke, Bearing and Cotter Gauge
SCW-13 Shop Cone Wrench: 13mm
SCW-14 Shop Cone Wrench: 14mm
SCW-15 Shop Cone Wrench: 15mm
SCW-16 Shop Cone Wrench: 16mm
SCW-17 Shop Cone Wrench: 17mm
SCW-18 Shop Cone Wrench: 18mm
SCW-19 Shop Cone Wrench: 19mm
SD-SET Shop Screwdrivers (Set of 4)
SP-7 Side Cutter Pliers
SW-0 Precision Spoke Wrench: .127" – Instructions
SW-1 Precision Spoke Wrench: .130”
SW-2 Precision Spoke Wrench: .136" – Instructions
SZR-1 Shop Scissors
TB-2 Emergency Tire Boot (3) – Instructions
TL-6.2 Steel Core Tire Levers (Set of 2)
TWS-1 Torx® Compatible Wrench Set
Items needed for Class not in PK-2 Set: (See tool list)
Travel Stand
*All items can be purchased individually and can be directly shipped to Volcanic before your arrival. Volcanic will also
ship your purchased items to your department upon departure. Purchaser is responsible for shipping costs if you choose
to have Volcanic ship them.
Tool orders must be submitted no later than MONDAY AUGUST 1st, 2016. Via [email protected] or
509-427-8623
SK-2 FEATURES MSRP $100
HOME MECHANIC STARTER KIT
THE SK-2 INCLUDES:
*ITEMS IN YELLOW ARE ON THE MUST HAVE TOOLS LIST
*ITEMS IN BLUE ARE ON THE RECOMMENDED TOOL LIST
CT-5 Mini ChainBrute Chain Tool – Instructions
DCW-1 Double Ended Cone Wrench: 13/14mm
DCW-2 Double Ended Cone Wrench: 15/16mm
DCW-3 Double Ended Cone Wrench: 17/18mm
FR-5 Cassette Lockring Remover – Instructions
GP-2 Super Patch Kit – Instructions
GSC-1 GearClean Brush
HCW-16 Chain Whip / 15mm Pedal Wrench - Instructions
HXS-1.2 L-Shaped Hex Wrench Set
SD-2 Shop Screwdriver: #2 Phillips
SW-7.2 Triple Spoke Wrench
TL-1.2 Tire Lever Set - Instructions
1622 Torx® Compatible "L" Wrench
Items needed for Class not in SK-2 Set: (See tool list)
Needle Nose Pliers Cable Housing Cutters Chain Checker
Travel Stand Crank Puller for Splined Cranks Chain Ring Nut Tool
Flathead Screwdriver Tire Levers Adjustable Wrench
Bottom Bracket tool
*All items can be purchased individually and can be directly shipped to Volcanic before your arrival. Volcanic will also
ship your purchased items to your department upon departure. Purchaser is responsible for shipping costs if you choose
to have Volcanic ship them.
Tool orders must be submitted no later than MONDAY AUGUST 1st, 2016. Via [email protected] or
509-427-8623