multiport serial boards cp-134el-a-i 4-port rs-422/485 pci ...linux et unix › maintenance facile...

2
1 fr.moxa.com [email protected] Multiport Serial Boards CP-134EL-A-I Cartes PCI Express RS-422/485 à 4 ports avec protection contre les surtensions 4 kV et isolation électrique 2 kV Compatible avec PCI Express x1 Vitesse de communication série jusqu‘à 921,6 Kbps Mémoire FIFO de 128 octets et contrôle des flux logiciels Différents câbles et boitier de raccordement disponibles pour RS-232/422/485 Pilotes fournis pour les dernières versions de Windows, Linux et Unix Maintenance facile avec affichage à LED et logiciel d‘administration Protection ESD de 15 kV, protection contre les surtensions de 4 kV et isolation électrique de 2 kV La carte série multivoies PCI Express intelligente CP-134EL-A-I est conçue pour les applications de TPV et de DAB, ainsi que pour les systè- mes d‘automatisation industrielle La CP-134EL-A-I est compatible avec tous les systèmes d‘exploitation courants. Ses 8 ports série prennent chacun en charge un débit de données pou- vant atteindre 921,6 kbps et fournissent des signaux de contrôle modem, ce qui garantit leur compatibilité avec un vaste choix de périphériques série. En outre, la CP-134EL-A-I fonctionne conformément à la norme PCI Ex- press x1, ce qui permet d‘installer la carte dans n‘importe quel emplace- ment répondant à ce format. Introduction Hardware Comm. Controller: 16C550C compatible Bus: PCI Express x1 Connector: DB44 female Serial Interface Number of Ports: 4 Serial Standards: RS-422/485 Max. No. of Boards per PC: 4 Serial Line Protection ESD Protection: 15 kV on the board Surge Protection: 4 kV Electrical Isolation: 2 kV Performance Baudrate: 50 bps to 921.6 kbps Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, XON/XOFF Serial Signals RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-2w: Data+(B), Data-(A), GND Operating Systems Windows Real COM Drivers: Windows 2000/XP/2003/ Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64) Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64) Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x Note: Please refer to Moxa’s website for the latest driver support information. Spécifications Technologie RS-485 intelligente pour une installation et un dépannage simples (brevet en cours) Il est relativement simple de mettre en place un réseau RS-485. La difficulté survient au moment de la mise sous tension, quand les péri- phériques connectés au réseau commencent à transmettre et recevoir des données. Dans la plupart des cas, les ingénieurs sont obligés d‘affi- ner les réglages du système en configurant des résistances de rappel et des terminaisons aux points stratégiques du réseau. La nouvelle techno- logie RS-485 intelligente de Moxa prend en charge deux fonctionnalités essentielles qui facilitent cette tâche : (1) une fonction d‘installation en un clic qui analyse automatiquement la topologie du réseau puis ajuste les terminaisons et les résistances de rappel, (2) une fonction de dépan- nage en un clic qui indique les modifications à faire pour remettre un réseau défaillant sur pied.

Upload: others

Post on 18-Jan-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Multiport Serial Boards CP-134EL-A-I 4-port RS-422/485 PCI ...Linux et Unix › Maintenance facile avec affi chage à LED et logiciel d‘administration › Protection ESD de 15 kV,

two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports

CP-134EL-A-I4-port RS-422/485 PCI Express board with 4 kV surge and 2 kV electrical isolation

The CP-134EL-A-I is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-134EL-A-I is compatible with all popular operating systems, and each of its 8 serial ports supports data rates of up to 921.6 kbps, and

provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-134EL-A-I works with PCI Express x1, allowing the board to be installed in any PCI Express slot.

Specifications

Overview

› PCI Express x1 compliant

› Serial communication speed up to 921.6 kbps

› 128-byte FIFO and on-chip S/W flow control

› Variety of connection cables and boxes available for RS-

232/422/485

› Drivers provided for the latest versions of Windows, Linux, and

Unix

› Easy maintenance with on-board LED display and management

software

› 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB44 femaleSerial InterfaceNumber of Ports: 4Serial Standards: RS-422/485Max. No. of Boards per PC: 4Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kVPerformanceBaudrate: 50 bps to 921.6 kbps

Serial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFFSerial SignalsRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GNDOperating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

1 w w w. m o x a . c o m i n f o @ m o x a . c o m

Multiport Serial Boards

two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports

CP-134EL-A-I4-port RS-422/485 PCI Express board with 4 kV surge and 2 kV electrical isolation

The CP-134EL-A-I is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-134EL-A-I is compatible with all popular operating systems, and each of its 8 serial ports supports data rates of up to 921.6 kbps, and

provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-134EL-A-I works with PCI Express x1, allowing the board to be installed in any PCI Express slot.

Specifications

Overview

› PCI Express x1 compliant

› Serial communication speed up to 921.6 kbps

› 128-byte FIFO and on-chip S/W flow control

› Variety of connection cables and boxes available for RS-

232/422/485

› Drivers provided for the latest versions of Windows, Linux, and

Unix

› Easy maintenance with on-board LED display and management

software

› 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB44 femaleSerial InterfaceNumber of Ports: 4Serial Standards: RS-422/485Max. No. of Boards per PC: 4Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kVPerformanceBaudrate: 50 bps to 921.6 kbps

Serial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFFSerial SignalsRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GNDOperating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

1 w w w. m o x a . c o m i n f o @ m o x a . c o m

Multiport Serial Boards

two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports

CP-134EL-A-I4-port RS-422/485 PCI Express board with 4 kV surge and 2 kV electrical isolation

The CP-134EL-A-I is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-134EL-A-I is compatible with all popular operating systems, and each of its 8 serial ports supports data rates of up to 921.6 kbps, and

provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-134EL-A-I works with PCI Express x1, allowing the board to be installed in any PCI Express slot.

Specifications

Overview

› PCI Express x1 compliant

› Serial communication speed up to 921.6 kbps

› 128-byte FIFO and on-chip S/W flow control

› Variety of connection cables and boxes available for RS-

232/422/485

› Drivers provided for the latest versions of Windows, Linux, and

Unix

› Easy maintenance with on-board LED display and management

software

› 15 kV ESD, 4 kV surge, and 2 kV electrical isolation onboard

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB44 femaleSerial InterfaceNumber of Ports: 4Serial Standards: RS-422/485Max. No. of Boards per PC: 4Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kVPerformanceBaudrate: 50 bps to 921.6 kbps

Serial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFFSerial SignalsRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GNDOperating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

1 w w w. m o x a . c o m i n f o @ m o x a . c o m

Multiport Serial Boards

1 f r . m o x a . c o m i n f o @ m o x a . c o m

M u l t i p o r t S e r i a l B o a r d s

CP-134EL-A-ICartes PCI Express RS-422/485 à 4 ports avec protection contre les surtensions 4 kV et isolation électrique 2 kV

› Compatible avec PCI Express x1

› Vitesse de communication série jusqu‘à 921,6 Kbps

› Mémoire FIFO de 128 octets et contrôle des fl ux logiciels

› Différents câbles et boitier de raccordement disponibles

pour RS-232/422/485

› Pilotes fournis pour les dernières versions de Windows,

Linux et Unix

› Maintenance facile avec affi chage à LED et logiciel

d‘administration

› Protection ESD de 15 kV, protection contre les surtensions

de 4 kV et isolation électrique de 2 kV

La carte série multivoies PCI Express intelligente CP-134EL-A-I est conçue pour les applications de TPV et de DAB, ainsi que pour les systè-mes d‘automatisation industrielle La CP-134EL-A-I est compatible avec tous les systèmes d‘exploitation courants.

Ses 8 ports série prennent chacun en charge un débit de données pou-vant atteindre 921,6 kbps et fournissent des signaux de contrôle modem,

ce qui garantit leur compatibilité avec un vaste choix de périphériques série.

En outre, la CP-134EL-A-I fonctionne conformément à la norme PCI Ex-press x1, ce qui permet d‘installer la carte dans n‘importe quel emplace-ment répondant à ce format.

Introduction

HardwareComm. Controller: 16C550C compatibleBus: PCI Express x1Connector: DB44 female

Serial InterfaceNumber of Ports: 4Serial Standards: RS-422/485Max. No. of Boards per PC: 4

Serial Line ProtectionESD Protection: 15 kV on the boardSurge Protection: 4 kVElectrical Isolation: 2 kV

PerformanceBaudrate: 50 bps to 921.6 kbps

Serial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF

Serial SignalsRS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GNDRS-485-2w: Data+(B), Data-(A), GND

Operating SystemsWindows Real COM Drivers: Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10(x86/x64)Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.xNote: Please refer to Moxa’s website for the latest driver support information.

Spécifi cations

Technologie RS-485 intelligente pour une installation et un dépannage simples (brevet en cours)Il est relativement simple de mettre en place un réseau RS-485. La diffi culté survient au moment de la mise sous tension, quand les péri-phériques connectés au réseau commencent à transmettre et recevoir des données. Dans la plupart des cas, les ingénieurs sont obligés d‘affi -ner les réglages du système en confi gurant des résistances de rappel et des terminaisons aux points stratégiques du réseau. La nouvelle techno-

logie RS-485 intelligente de Moxa prend en charge deux fonctionnalités essentielles qui facilitent cette tâche : (1) une fonction d‘installation en un clic qui analyse automatiquement la topologie du réseau puis ajuste les terminaisons et les résistances de rappel, (2) une fonction de dépan-nage en un clic qui indique les modifi cations à faire pour remettre un réseau défaillant sur pied.

Page 2: Multiport Serial Boards CP-134EL-A-I 4-port RS-422/485 PCI ...Linux et Unix › Maintenance facile avec affi chage à LED et logiciel d‘administration › Protection ESD de 15 kV,

2

M u l t i p o r t S e r i a l B o a r d s

Physical CharacteristicsDimensions: 67.2 x 103 mm (2.69 x 4.06 in)

Environmental LimitsOperating Temperature: 0 to 55°C (32 to 131°F)Storage Temperature: -20 to 85°C (-4 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)Altitude: Up to 2000 mNote: Please contact Moxa if you require products guaranteed to functionproperly at higher altitudes.

Standards and CertificationsEMC: CE, FCCEMI: EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class B

EMS: EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS)Green Product: RoHS, CRoHS, WEEE

MTBF (mean time between failures)Time: 433,077 hrsDatabase: Telcordia (Bellcore), GB

Power RequirementsPower Consumption: 3,414 mA @ 3.3 V

WarrantyWarranty Period: 5 yearsDetails: See www.moxa.com/warranty

Dimensions

Unit: mm (inch)

Références de commandeAvailable ModelsCP-134EL-A-I: 4-port RS-422/485 low profile PCI Express x1 serial board w/ surge protection andelectrical isolationCP-134EL-A-I-DB9M: 4-port RS-422/485 low profile PCI Express x1 serial board w/ surge protectionand electrical isolation, includes DB9 male cableCP-134EL-A-I-DB25M: 4-port RS-422/485 low profile PCI Express x1 serial board w/ surgeprotection and electrical isolation, includes DB25 male cable

© Moxa Inc. All Rights Reserved. Updated Dec. 4, 2013. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.