ZipLink Wireless 5.8 GHz POTS Line & Ethernet Extender

Features• Complete working system in a box• No radio experience required• Ethernet bandwidth supports VoIP connectivity• Works with ACP Series 2.0 for linesharing capability• Extend one or two POTS lines and 12 Mbps Ethernet• Ruggedized for outdoor installation - NEMA 4 rating

Call for data sheets and support:

NEW!!

WIRELESS LAST MILE CONNECTIVITY for SUBSTATION COMMUNICATIONS

Don't let "Last Mile" obstacles derail your installation project or bust your budget. Avoid trenching to hard to reach substation and revenue billing sites with the ZipLink 5.8GHz Ethernet Radio, a wireless POTS Line & Ethernet Extender from Multi-Link.

The ZipLink is a fast, affordable alternative to trenching cable through impassable terrain, across parking lots, streets, or where substrate is too unstable. A typical trenching job would cost $3,500 to get started and average $200/hr in operations costs thereafter. At a fraction of the cost, the ZipLink could be installed and running in few a hours. Since the POTS connection is wireless, there is no need to install a high voltage telecom interface to prevent ground potential rise from damaging the PSTN.Available in five models for project customization; Outdoor rated with military grade encryption.

NO permits or licenses requiredNO high voltage telecom interfaceNO need for surveys or right of way mapsNO direct burial cableNO radio experience necessaryNO trenching costs or delays

122 Dewey Drive • Nicholasville, KY 40356800.535.4651 • www.multi-link.net

ZipLink-2 System Shown

INDUSTRIAL WIRELESS PHONELINE & ETHERNET EXTENDER

WIR

ELES

S LA

ST M

ILE

CO

NN

ECTI

VIT

Y

RUGGEDIZED HI-SPEED ETHERNET EXTENDER

ZipLink-Xtreme/200200Mbps Wireless Ethernet Extender

ZipLinkWireless 5.8 GHz Phoneline & Ethernet Extender

ZipLink is a fast, affordable, wireless alternative to trenching cables through impassable terrain. Phone and Ethernet connections are extended up to a mile by an 256-bit AES encrypted direct sequence radio signal.

The newest ZipLink wireless Ethernet extender has all the features and benefits of the ZipLink but withmore range, speed, and ruggedness. The ZipLink-X200extends 200Mbps of bandwidth up to three miles lineof sight in conditions ranging from -40°F to 145°F.

Features• Complete working system in a box• No radio experience required• Ethernet bandwidth supports VoIP connectivity• PBX compatible• Extend one or two POTS lines and 12 Mbps Ethernet• Ruggedized for outdoor installation - NEMA 4 rating

Communication Protocols Supported: EthernetAnalog phone line (1 and 2 line models)Dial-up modemsVoice over Internet ProtocolFax

Benefits• Saves money by eliminating costly trenching • Fast Installation -- Hours not days• No permits or licenses required • No need for surveys or right of way maps

Manufactured by:

ZipLink System includes:• MASTER and REMOTE end radios; Pre-configured as working pair• 2 x power adapters (POE injectors for Ethernet models)• 2 x 100 ft. of outdoor Cat 3 cable (Cat 5e for Ethernet models)• 2 x wall pole mount and brackets & all hardware

Required tools:Drill/ Phillips head screwdriver, Fishline, RJ11 crimper, 10mm nut driver

Specifications: Radio Range: 3 Miles / 5 kilometersOver the air data rate: 200MbpsOperating Temperature: -40F to +145F (-40C to +60C)Power Required: 19W maximum, 10W typicalRadio Type: 5.8 GHz DSSS, License FreeEncryption: 256 Bit WPA-PSK (AES)Radio Power: +40 dBm (adjustable)Radio Sensitivity: -82 dBm @ 10-5 BEROutdoor Unit Size: 12” x 12” x 3.5” System Shipping Weight: 23 lbs

Don’t Trench it...ZIP it!

From Zero to200 Mbps in seconds!

122 Dewey Drive • Nicholasville, KY 40356800.535.4651 • www.mul -link.net

Manufacturer Part # Description List UPC Multi-Link, Inc. ZipLink-1 1 Phoneline &12 Mbps Ethernet Extender $1995 757317917070 Multi-Link, Inc. ZipLink-2 2 Phoneline &12 Mbps Ethernet Extender $2895 757317917087 Multi-Link, Inc. ZipLink-E Rugged 40 Mbps Ethernet Extender 1mi $1195 757317917100 Multi-Link, Inc. ZipLink-X Rugged 80 Mbps Ethernet Extender 3mi $1995 757317917094 Multi-Link, Inc. ZipLink-X200 Rugged 200 Mbps Ethernet Extender 3mi $2495 757317917209

NEW!

  

  

 Secure Dial‐up Substation Access 

Benefits  Secures dial‐up meter/modems from unauthorized access 

Provides a Secure & Controlled “Out of Band” communications    path to IT Service Ports 

3, 5, and 9 port models  Works during power outages when AC or DC UPS’s are in use 

Reduce or eliminate costly dedicated phone lines 

Automatically directs calls to phones, meters, power quality monitors, relays   

Applications Utility Meter Reading Telephony Firewall Substation Communications Out‐of‐Band Network Access 1st Line Network Support Secure Service Port Access Remote Site Management Modem Polling SCADA Interrogation 

Product Overview Reduce  phone  line  costs,  improve connectivity,  and  secure  your telecom  and  network  equipment with  Multi‐Link’s  ACP  Series  2.0, Telephony Switch & Dial‐up Modem Firewall.    

 

 ACP‐500  

The ACP Series 2.0 enables utilities to communicate with remote meters, modems, 

relays, monitors, etc. more efficiently and securely while cutting costs. 

 Call Routing The  ACP  2.0  automatically  routes  calls  to dial‐up  modems,  ensuring  that  the  right resource  is  reached  the  first  time.  This consistent  connectivity  prevents  time consuming  dial‐backs  and  streamlines polling and data acquisition processes.  Out of Band Access Installed on an existing POTS  line,  the ACP provides  an  inexpensive,  secure  and controlled “out of band” path for accessing service ports to network equipment.  Up to nine  devices  can  share  a  single  telephone line,  eliminating  costly  phone  lines  and saving  up  to  $400/month  per  site. Companies with multiple  remote  sites  can realize a significant ROI in 3 months or less.  Telephony Firewall The  ACP  2.0  is  engineered  to  provide  an additional  layer  of  security  to  connected devices.Vulnerable pathways to equipment via  the  PSTN  are  protected  by programmable Security Access Codes up to seven characters. There are over 35 million combinations  to  choose  from,  effectively creating  a  telephony  firewall  for  dial‐up connections.   

 New Features! 

 HACKER SHIELD PROTECTION Programmable Security Access Codes, up to 7 digits per port, protects connected devices from unauthorized access for a robust telephony firewall. 

Caller ID “Store & Forward” CID is sent to device on first ring. 

Multiple Line Seizure Ports Up  to  four device ports  can now be designated  for  emergency  line seizure for critical applications. 

Simplified Installation All  line‐in and device  jacks are RJ11. No  additional  connectors  are required. 

LED Status Display Seven segment display shows port in use & programming value read‐back. Audible read‐back tones are also provided for remote programming. 

Data Disruption Protection Prevents  active  calls  from interruption by another device. 

Remote Programming ACP’s can be securely programmed by a remote administrator.  Standard Features 

DSL Compatible  Bell Spec Ring‐Back Tones  Dual Surge Protection  No Software to Install  Mounting Bracket Included  2 Year Warranty  Free Phone Tech Support  Proudly Made in USA 

   

                         

  

  

  

How does the ACP Series 2.0 work? The  ACP  installs  on  an  analog  phone  line  and  answers inbound calls at the first sign of ring voltage. After the ACP goes off‐hook,  it  immediately  screens  for  fax and  security access  codes  (SAC).  During  this  processing  period,  a  Bell spec “ring‐back” tone  is  issued to the calling party. Once a SAC  command  is  received,  the  call  is  routed  to  the corresponding port. In the absence of fax/access codes, the call  is  defaulted  to  device  port  #1.  Outbound  calls  are processed  in  the normal  fashion with barge‐in protection. The  emergency  barge‐in  (EBI)  feature  allows  up  to  four user  designated  device  ports  to  seize  the  phone  line  for critical outbound calls. 

Ask our technicians Our  experienced  staff  of  technicians  is  available  to  answer any  questions  you  may  have  about  programming  or installation. We  can  even  test  and  program  your  unit  over the  phone! We  are  available  before  and  after  the  sale  to ensure  your  satisfaction  and  optimal  performance  for  your application.  

Toll Free: 800.535.4651 International: +1 859.885.6363 

sales@multi‐link.net

 

  

Multi‐Link, Inc. 122 Dewey Drive | Nicholasville, KY | 40356 USA 

Sales and Tech Support:  800.535.4651 Fax:  859.885.6619 www.multi‐link.net 

 

 Copyright © Multi‐Link, Inc. 2015