mtc - niedax.de · mtc 5 wire mesh tray u-shaped, made of steel wires, spot-welded, with welded...

2018

WIRE MESH TRAYMTC

ICONS

Please ask for the Certifications VDE/UL

All products in this catalog are classified according to the EAN code (13 digits). The first 7 digits indicate the country (40 = Germany) and the manufacturer‘s code (13339 = Niedax). The following six digits are the product code. Example EAN code of the product TK = 40 60.85 13339 183708.

Hardware

Information pages

New

Installation Instructions

Reference Note

Fast Install

Siderail Height in mm

Wire Diameter in mm

Pipe Diameter in mm

Cover hole and depth in mm

Discontinued model

No halogen

No silicone

Plastics/ElastomerK01 PA - Polyamide, non halogen

K02 PS - Polystyrene, non halogen, impact resistant

K03 PE - Polyethylene, non halogen

K04 PP - Polypropylene, non halogen

K05 PC - Polycarbonate, non halogen

K06 SBR/NBR - Styrene-Butadiene-Nitrile Rubber, non halogen

K07 CR - Chloroprene Rubber, halogenated

K08 NBR - Nitrile Rubber, non halogen

K09 PVC hard - Hard Polyvinylchloride, halogenated

K10 PVC - Polyvinylchloridide, halogenated

K11 ABS - Acrylnitrile-Butadiene-Styrene, non halogen

K21 PUR - Polyurethane, non halogen

K14 POM - Polyoxymethylen, non halogen

K15 SBR - Styrene-Butadiene Rubber, non halogen

K16 CR/NBR - Chloroprene/Nitrile Rubber, halogenated

K17 CR/SBR - Chloroprene/Styrene-Butadiene Rubber, halogenated

K18 TPE - Thermoplastic Elastomer, non halogen

K19 FS 31 - Phenolic Resin, non halogen

K20 SI - Silicone Rubber, non halogen

K22 PET - Polyethylene Terephalate, non halogen

K12 ASA - Acrylate-Styrol-Acrylnitrile Copolymer, non halogen

K23 UP-GF - Glass-Fiber Reinforced Polyester, non halogen

Epoxy Coating, non halogenC1

SteelB Steel, bareV Steel, galvanized according to DIN EN ISO 50 961/50979 and DIN EN ISO 2081, blued, (Replacement galvanized according to DIN EN ISO 4042)

G Steel, galvanized according to DIN EN ISO 50 961/50979 and DIN EN ISO 2081, passivated, (Replacement galvanized according to DIN EN ISO 4042)

S Steel, pre-galvanized according to DIN EN 10346

F Steel, hot dip galvanized after fabrication (HDGAF) according to DIN EN ISO 1461 (Replacement according to DIN EN ISO 50 976)Steel, black-oxide finishSB

FG Steel, geomet® galvanized

COLOR Steel, pre-galvanized and powdercoatedCDV Steel, wire galvanized according to DIN EN 10244

Steel, galvanized according to nach DIN 50961/50979 und DIN EN ISO 2081, blued and powdercoatedVC

C R W L WA N PComplete model-No. white creme white light grey white aluminium aluminium aluminiumfor the colour RAL 9010 RAL 9001 RAL 7035 RAL 9006 natural anodized plate-finishedidentity on stock Other RAL colours on requests. For possible colour divergences we assume no l iabi l i ty .

STANDARD COLOURS SURFACE IN ALUMINIUM

F8 Steel, mechanical zinc plated / passivatedHigh quality coating. Corrosion resistance measured by means of a test salt spray according to DIN 50 021 (ASTM-B117-90) is at least 500 hours.

F9

F10

Steel, mechanical zinc plated / passivatedHigh quality coating. Corrosion resistance measured by means of a test salt spray according to DIN 50021 (ASTM-B117-90) is at least 600 hours.

Steel, electrical mechanical / passivatedZinc coating thickness of 5 microns, electrolytically applied and clear passivated according to BS EN 12329 2000 FE/ZN5//A.

F6 Natural colour Untreated material against corrosion.

F7 Steel, plastic coatingEVA (Ethylene Vinyl Acetate Copolymer Saponifies, Levasint®) resistance to fire according to DIN 4102.

F1 Steel, zinc coating and chromate Steel, zinc coating & chromate Thickness of zinc is between 8-12 microns, elec-trolytic galvanizing & additionally chromated. Corrosion resistance measured by using a salt spray test according to DIN 50021 (ASTM-B117-90) at least 72 hours.

F2 Steel, hot dip galvanizedThickness of zinc between 50-70 microns, after immersion machining in a bath of molten zinc.

F3 Stainless steel (material number. 1.4401 [316])Indoor use / Outdoor in humid environments and moderately aggressive.

F5 BrassFor indoor use only.

F4 Steel, coatedDekor-lacquer interior use in dry environments and not corrosive.

E1 Material Code: 1.4016

Stainless SteelE2 Material Code: 1.4310E3

E5 Material Code: 1.4571E6 Material Code: 1.4529

E4 Material Code: 1.4401, 1.4404 E7 Material Code: 1.4547E8 Material Code: 1.4430E9 Material Code: 1.4362

E10 Material Code: 1.4307E11 Material Code: 1.4034

Material Code: 1.4301, 1.4303

Operating temperature range

Functional maintenanceof Electric Cable Systems

AL Aluminium, N = naturally anodized, P = mill-finished, C = powdercoated in RAL coloursP Electrotechnical Porcelain, non halogen CU CopperMS Brass

© 2018 Niedax GmbH & Co. KG, Linz/Rhein. Changes, print - and punctuation errors and other errors reserved. All data without guarantee.

0718

Fast and quickly installed

Niedax is providing a complete wire mesh tray system primarily for industrial applications. Stainless steel versions are used in food & beverage processing as well as in chemical industry applications.

The wire mesh tray is of sound construction and designed for heavy loads due to wire diameters of up to 5 mm. Boltless accessories allow fast and easy installation.

MTC NXCITO Wire Mesh Tray

Easy Handling:NXCITO wire mesh tray can be installed smoothly and quickly even in confi ned spaces.

No need for bolts and splices:NXCITO wire mesh trays are connected with a patented snap lock mechanismthat ensures the same load rating as bolted splices.

NXCITO Wire Mesh Tray is fully compatible with all existing accessories.Grounding lugs, mounting plates for junction boxes …

1 2 3

Click!

ONE CLICK - FINISHED!

Suitable forcircuit

integrity

VDE-tested to DIN EN 61537

Width 100-400 mm suitable for circuit integrity, please refer to the general building authority test certifi cate.

UL-certifi ed products available on request.

MTC 1

SYSTEM Wire mesh tray MTC 30... P. 4

Wire mesh tray MTC 54... P. 5

Wire mesh tray MTC 105... P. 6

Wire mesh cable tray quick connector MTCQC... P. 6

Elbow 90°, adjustable MTCE... P. 7

Connector for fittings MTCA... P. 7

Universal splice plate GRHKM... P. 7

Universal splice plate GRV... P. 7

Adjustable splice plate GRGV... P. 8

Barrier strip RW... P. 8

Splice plate for barrier strip RTV... P. 8

Mounting clamp for barrier strip GRVC... P. 9

Cable drop out for wire mesh tray GTKA... P. 9

Mounting plate RMP... P. 9

Wire mesh mounting bracket GRWGK... P. 9

Fixing plate for wire mesh tray GRBP... P. 10

Mounting brackets GRMB... P. 10

Mounting bracket for wire mesh tray GTMB... P. 10

Wall and bracket mounting of wire mesh tray GTWAB... P. 10

Fixing clamp for wire mesh tray, horizontal GRKHV 173 S P. 11

Fixing clamp for wire mesh tray, horizontal GRKH... P. 11

Fixing clamp for wire mesh tray, vertical GRKV... P. 11

Beam clamp GRK 25 P. 11

Beam clamp PKS M... P. 12

Threaded rod M 6/... P. 12



Center hanger for threaded rod GRKB... P. 12

Trapeze hanger for wire mesh tray GTAB... P. 13

Center support for wire mesh tray GTCB... P. 13

Extension for wire mesh hanger GRTS 30/3 F P. 13

Mounting bracket for wire mesh tray GRHB 30/150 F P. 13

Standard hanger for wire mesh tray GRSH 30 F P. 14

Overhead hanger for wire mesh tray GRHS... P. 14

Hanger and wall bracket KTAM... P. 14

Overhead hanger HUF... P. 15

Spacer UD... P. 15

Bracket KTUM... P. 16

Fixing clip for wire mesh tray GRBA 40 E2 P. 16

Wire mesh cable tray ground terminal GTEKM 6X25 P. 16

Ground terminal MTEKM... P. 17

J-Hook bolt GRSM... P. 17

Slotted pan head bolt ZKM 6X16 P. 17

Mushroom head bolt FLM 6X20... P. 18

Mushroom head bolt FLM 8X16 F P. 18

Cover for wire mesh tray in roof shape MTCC... P. 18

Retaining bracket for wire mesh tray cover GRDHL... P. 19

An identical wire mesh tray just without the snap-in connectors is still available. Formerly known as Tolmega GTS… this series is now called Niedax MT…

Please find the nominal dimensions of accessories in the chart section.

ACCESSORIES

Available Side Rail Heights 30 54 105

!MTC 2

WIRE MESH TRAY SYSTEM

MTC 4


Wire mesh trayU-shaped, made of steel wires, spot-welded, with welded connector

Support span (m)

Load

q (k

N/m

)

Specified load ratings are independent of splice plate location.

Wire mesh tray MTC 30 … E4 on request

Load chart: q = equally distributed load (tested acc. to DIN EN IEC 61537)

MTC 30.050 V

50 3,9 3,9MTC 30.100 V 100 3,9 3,9MTC 30.150 V 150 3,9 3,9MTC 30.200 V 200 3,9 3,9MTC 30.300 V 300 3,9 3,9MTC 30.050 F

50 3,9 3,9MTC 30.100 F 100 3,9 3,9MTC 30.150 F 150 3,9 3,9MTC 30.200 F 200 3,9 3,9MTC 30.300 F 300 3,9 3,9MTC 30.050 E3

50 3,9 3,9MTC 30.100 E3 100 3,9 3,9MTC 30.150 E3 150 3,9 3,9MTC 30.200 E3 200 3,9 3,9MTC 30.300 E3 300 3,9 3,9MTC 30.050 E4 50 3,9 3,9MTC 30.100 E4 100 3,9 3,9MTC 30.150 E4 150 3,9 3,9MTC 30.200 E4 200 3,9 3,9MTC 30.300 E4 300 3,9 3,9

V

VVVVF

FFFF

E3

E3E3E3E3E4E4E4E4E4

Model No. widthinside

B

steel wire -Ølengthwise

steel wire -Øcrosswise

mm mm mm

smallestpackaging

unit

3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m

EANcode

711215711222711239711246711253712014712021712038712045712052713011713028713035713059713066714018714025714032714049714056

Weightin kg

per 100

m

39,8753,8467,7582,43

110,4343,8559,2374,5390,67

121,4740,1254,1968,1882,96

111,1340,5354,7368,8783,80

112,25

MTC 20

MTC 5


Support span (m)

Load

q (k

N/m

)



Load chart: q = equally distributed load (tested to DIN EN IEC 61537 standard)

MTC 54.050 V

50 3,90 3,90MTC 54.100 V 100 3,90 3,90MTC 54.150 V 150 3,90 3,90MTC 54.200 V 200 3,90 3,90MTC 54.300 V 300 4,82 4,82MTC 54.400 V 400 4,82 5,82MTC 54.500 V 500 4,82 5,82MTC 54.600 V 600 4,82 5,82MTC 54.050 F

50 3,90 3,90MTC 54.100 F 100 3,90 3,90MTC 54.150 F 150 3,90 3,90MTC 54.200 F 200 3,90 3,90MTC 54.300 F 300 4,82 4,82MTC 54.400 F 400 4,82 5,82MTC 54.500 F 500 4,82 5,82MTC 54.600 F 600 4,82 5,82MTC 54.050 E3

50 3,90 3,90MTC 54.100 E3 100 3,90 3,90MTC 54.150 E3 150 3,90 3,90MTC 54.200 E3 200 3,90 3,90MTC 54.300 E3 300 4,82 4,82MTC 54.400 E3 400 4,82 5,82MTC 54.500 E3 500 4,82 5,82MTC 54.600 E3 600 4,82 5,82MTC 54.050 E4 50 3,90 3,90MTC 54.100 E4 100 3,90 3,90MTC 54.150 E4 150 3,90 3,90MTC 54.200 E4 200 3,90 3,90MTC 54.300 E4 300 4,82 4,82MTC 54.400 E4 400 4,82 5,82MTC 54.500 E4 500 4,82 5,82MTC 54.600 E4 600 4,82 5,82

V

VVVVVVVF

FFFFFFF

E3

E3E3E3E3E3E3E3E4E4E4E4E4E4E4E4


B



mm mm mm

smallestpackaging

unit

3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m

EANcode

711260711277711284711291711314711321711338711345712069712076712083712090712113712120712137712144713073713080713097713110713134713165713189713219714063714070714087714094714117714124714131714148

Weightin kg

per 100

m

62,9876,6689,91

104,16202,94283,58333,23382,8068,9484,3398,90

114,58223,24311,94366,55421,0863,3877,1590,48

104,83204,24285,39335,35385,2464,0277,9391,40

105,89206,30288,28338,75389,14

MTC 20

MTC 6



Support span (m)

Load

q (k

N/m

)



Load chart: q = equally distributed load (tested to DIN EN IEC 61537)

MTC 105.100 V

100 3,90 3,90MTC 105.150 V 150 3,90 3,90MTC 105.200 V 200 4,82 4,82MTC 105.300 V 300 4,82 5,82MTC 105.400 V 400 4,82 5,82MTC 105.500 V 500 4,82 5,82MTC 105.600 V 600 4,82 5,82MTC 105.100 F

100 3,90 3,90MTC 105.150 F 150 3,90 3,90MTC 105.200 F 200 4,82 4,82MTC 105.300 F 300 4,82 5,82MTC 105.400 F 400 4,82 5,82MTC 105.500 F 500 4,82 5,82MTC 105.600 F 600 4,82 5,82MTC 105.100 E3

100 3,90 3,90MTC 105.150 E3 150 3,90 3,90MTC 105.200 E3 200 4,82 4,82MTC 105.300 E3 300 4,82 5,82MTC 105.400 E3 400 4,82 5,82MTC 105.500 E3 500 4,82 5,82MTC 105.600 E3 600 4,82 5,82MTC 105.100 E4 100 3,90 3,90MTC 105.150 E4 150 3,90 3,90MTC 105.200 E4 200 4,82 4,82MTC 105.300 E4 300 4,82 5,82MTC 105.400 E4 400 4,82 5,82MTC 105.500 E4 500 4,82 5,82MTC 105.600 E4 600 4,82 5,82

V

VVVVVVF

FFFFFF

E3

E3E3E3E3E3E3E4E4E4E4E4E4E4


B



mm mm mm

smallestpackaging

unit

3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m

EANcode

711352711369711376711383711390711413711420712151712168712175712182712199712212712229713233713264713288713318713325713332713349714155714162714179714186714193714216714223

Weightin kg

per 100

m

104,37117,61203,45280,79325,95373,30421,64114,80129,37223,80308,86358,55410,63463,81105,03118,36204,75282,57328,03375,68424,33106,10119,56206,82285,44331,35379,49428,63

MTC 20

Wire mesh cable tray quick connector, one-pieceU-shaped, spot-welded of steel wires, with welded connectors

for quick connection of horizontal in longitudinal direction aligned mesh cable trays

Used for: Wire mesh cable tray MTC 54...

MTCQC 54.100 E3

54 100MTCQC 54.150 E3 54 150MTCQC 54.200 E3 54 200MTCQC 54.300 E3 54 300

NNNN

E3

E3E3E3

Model No. Height H

widthinside

B

mm mm

smallestpackaging

unit

10 pc.10 pc.10 pc.10 pc.

EANcode

166824166831166848166855

Weightin kg

per 100

13,7814,7323,8436,08

MTC 20

MTC 7

Elbow 90°, adjustableU-shaped, spot-welded of steel wires, with welded connectors

Used for: Wire mesh tray MTC 54 …

Elbow 90° MTCE 54 … E4 on request

MTCE 54.100 V

100MTCE 54.150 V 150MTCE 54.200 V 200MTCE 54.300 V 300MTCE 54.100 F

100MTCE 54.150 F 150MTCE 54.200 F 200MTCE 54.300 F 300MTCE 54.100 E3

100MTCE 54.150 E3 150MTCE 54.200 E3 200MTCE 54.300 E3 300MTCE 54.100 E4 100MTCE 54.150 E4 150MTCE 54.200 E4 200MTCE 54.300 E4 300

NNNN

NNNN

NNNNNNNN

V

VVVF

FFF

E3

E3E3E3E4E4E4E4


B

mm

smallestpackaging

unit

4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.4 pc.

EANcode

711512711536711550711574712311712335712359712373713424713431713455713462714315714322714339714346

Weightin kg

per 100

pc.

30,5534,7654,45

106,8033,6138,2459,90

117,4830,7534,9854,80

107,4831,0635,3455,35

108,57

MTC 25

Connector for fittings

creating fittings for wire mesh trays on site

MTCA 4 E3

4MTCA 5 E3 5MTCA 6 E3 6

NNN

E3

E3E3

Model No. for steel wire diameter

mm

smallestpackaging

unit

50 pc.50 pc.50 pc.

EANcode

713615713622713639

Weightin kg

per 100

pc. /

1,091,011,03

Universal splice plate2-parts

for making straight runs of wire mesh tray and fittings flexibly

GRHKM 6X15 V

8.8GRHKM 6X15 F

8.8GRHKM 6X15 E3

70

V

F

E3

Model No. resistanceclass

smallestpackaging

unit

50 pc.50 pc.50 pc.

EANcode

012442012435012428

Weightin kg

per 100

pc.

1,831,831,82

MTC 20

Universal splice plate2-parts

for making straight runs of wire mesh tray and fittings flexibly

GRV 6

1 FLM 6X16 FGRV 6 F

1 FLM 6X16 FGRV 6 E3

1 FLM 6X16 E3GRV 6 E5

1 FLM 6X16 E5

S

F

E3

E5

Model No. incl. accessories smallestpackaging

unit

50 pc.50 pc.20 pc.20 pc.

EANcode

280209280186802104127733

Weightin kg

per 100

pc.

2,622,752,692,72

MTC 8


Adjustable splice plate

Requirement: 2 pieces per joint

for fabrication of an angle connection of straight wire mesh tray with two lateral longitudinal steel wires(max. 41 mm centrical distance)

Please order necessary fixing material separately2 GRSM 6

GRGV 50

2 GRSM 6 VGRGV 50 F

2 GRSM 6 FGRGV 50 E3

2 GRSM 6 E3

S

F

E3


unit

10 pc.10 pc.10 pc.

EANcode

940561940585940578

Weightin kg

per 100

pc.

11,0018,4611,00

Barrier stripperforated, C-shaped

for the separation of wires and cables with different functions and/or voltages

RW 35

30 0,75 4 FLM 6X12RW 50 47 0,75 4 FLM 6X12RW 60 55 0,75 4 FLM 6X12RW 85 80 0,90 4 FLM 6X12RW 110 98 0,90 4 FLM 6X12RW 35 F

30 0,75 4 FLM 6X12 FRW 50 F 47 0,75 4 FLM 6X12 FRW 60 F 55 0,75 4 FLM 6X12 FRW 85 F 80 0,90 4 FLM 6X12 FRW 110 F 98 0,90 4 FLM 6X12 FRW 35 E3

30 0,80 4 FLM 6X12 E3RW 50 E3 47 0,80 4 FLM 6X12 E3RW 60 E3 55 0,80 4 FLM 6X12 E3RW 85 E3

80 0,90 4 FLM 6X12 E3RW 110 E3

98 0,90 4 FLM 6X12 E3RW 35 E5

30 0,80 4 FLM 6X12 E5RW 60 E5 55 0,80 4 FLM 6X12 E5RW 110 E5 98 0,90 4 FLM 6X12 E5

S

SSSSF

FFFF

E3

E3E3E3

E3

E5

E5E5

Model No. Height H

Materialthickness

(t)

incl. accessories

mm mm

smallestpackaging

unit

10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m10 x 3 m

EANcode

213504224951225002237609251001213603938551225101237708251100333325333356333400333424333509082926729401074518

Weightin kg

per 100

m

35,1345,0549,8678,3990,3738,6749,5854,8786,1299,3037,6548,3253,4878,8888,7338,5153,8681,25

The continuous perforation allows a stepless mounting.

Splice plate for barrier strip

for the mechanical, electrical and at the joint form-fitting connection of the separators in alignment inthe longitudinal direction

RTV 35 E2

29,0 80RTV 50 E2 46,5 80RTV 60 E2 54,5 80RTV 85 E2 79,5 80RTV 110 E2 97,5 80

E2

E2E2E2E2

Model No. Height H

LengthL

mm mm

smallestpackaging

unit

20 pc.20 pc.20 pc.20 pc.20 pc.

EANcode

213658224999225149237753251162

Weightin kg

per 100

pc.

0,741,181,392,032,50

The connection of the barrier strips to be carried out by clicking in the splice plates at the joint.

MTC 9

Mounting clamp for barrier strip

for attaching barrier strip to wire mesh trays

GRVC 14

1 FLM 6X20 FGRVC 14 F

1 FLM 6X20 FGRVC 14 E3

1 FLM 6X20 E3GRVC 14 E5 1 FLM 6X20 E4

S

F

E3

E5


unit

50 pc.50 pc.20 pc.20 pc.

EANcode

280308280339841509141876

Weightin kg

per 100

pc.

2,282,402,302,32

Cable drop out for wire mesh tray

for wire mesh trays with a distance of cross-span of 100 mm and/or distance for longitudinalsteel wire of 50 mmfor wire mesh trays ( > 100 mm width) and max. steel wire diameter of 6 mm

for boltless mounting by putting and sliding on

Used for: Wire mesh tray MTC …

GTKA 50 S

GTKA 50 FG

GTKA 50 E3

GTKA 50 E4

S

FG

E3

E4

Model No. smallestpackaging

unit

10 pc.10 pc.10 pc.10 pc.

EANcode

967483136865116720136858

Weightin kg

per 100

pc.

16,517,614,014,0

MTC 23

Mounting plate

for mounting distribution or junction boxes

RMP 130

2 FLM 6X12RMP 130 F

2 FLM 6X12 FRMP 130 E3

2 FLM 6X12 E3RMP 130 E5

2 FLM 6X12 E5

S

F

E3

E5


unit

10 pc.10 pc.10 pc.10 pc.

EANcode

206148206162769728073276

Weightin kg

per 100

pc.

27,9030,7828,0928,38

MTC 25

Mounting accessories required for mounting on mesh cable trays 2 x GRSM 6 please orderseparately.

Wire mesh mounting bracket, single-piece

The clamping range includes steel wire thickness from 3,0 up to 6,0 mm

for variable threaded rod suspension of wire mesh tray (max. 300 mm)for variable mounting at the side of wire mesh tray (max. 100 mm width)for variable floor mounting of wire mesh tray

GRWGK 10 S

GRWGK 10 E3

S

E3


unit

25 pc.25 pc.

EANcode

280797931057

Weightin kg

per 100

pc.

5,85,8

MTC 24

MTC 10


Fixing plate for wire mesh tray

for floor and bracket mounting of wire mesh tray


Fixing accessories for the particular application have to be ordered separately.

GRBP 6 S

GRBP 6 F

GRBP 6 E3

GRBP 6 E5

S

F

E3

E5


unit

50 pc.50 pc.50 pc.50 pc.

EANcode

936953966257936960127726

Weightin kg

per 100

pc.

1,111,221,121,13

Mounting brackets

for screwless wall mounting of mesh cable trays up to a width of 100 mm and at least two longitudinalwires at the sides with a central distance ≥ 25 mm and ≤ 50 mmfor central threaded rod suspension of mesh cable trays up to a width of 300 mm

Used for: Wire mesh cable tray MTC...

GRMB 50

GRMB 50 E3

S

E3


unit

20 pc.20 pc.

EANcode

864904912018

Weightin kg

per 100

7,237,27

Mounting bracket for wire mesh tray

for boltless wall mounting of wire mesh tray with max. 100 mm width and min. 2 lateral longitudinalsteel wires, centered threading rod suspension up to a width of 300 mmfor the mounting of distribution boxes


GTMB 65 S

GTMB 65 FG

GTMB 65 E3

GTMB 65 E4

S

FG

E3

E4


unit

20 pc.20 pc.20 pc.20 pc.

EANcode

058211058198058181079445

Weightin kg

per 100

pc.

8,68,79,09,0

MTC 20

Wall and bracket mounting of wire mesh tray

for wall mountingfor attaching wire mesh trays to any kind of brackets


GTWAB 50 S

GTWAB 50 FG

GTWAB 50 E3

GTWAB 50 E4

S

FG

E3

E4


unit

50 pc.50 pc.50 pc.50 pc.

EANcode

058990058983058976018642

Weightin kg

per 100

pc.

2,62,63,02,5

MTC 20 MTC 21

MTC 11

Fixing clamp for wire mesh trayhorizontal / vertical

for fixing wire mesh trays to horizontal and vertical steel girder flanges with a maximum thickness of20 mm

Used for: Wire mesh tray GR …, GRS .., GRL…, GRCI… and MTC … 100-…

GRKHV 173 S

173 148 0,6 0,9 1 SK 8X35 VN S

Model No. total length L

supportlength

L1

loadrating

F1 at L 1/2

loadrating

F2 at L 1/2

incl. accessories

mm mm kN kN

smallestpackaging

unit

10 pc.

EANcode

166381

Weightin kg

per 100

36,77

MTC 22

Screw tightening torque 8 NmWidth across flats 13

An alternating arrangement of the hook bolts guarantees a secure fastening of the wire mesh tray tothe wire mesh tray fastening clamp.A right-angled recess in the legs allows it to be mounted on round support profiles or an installation ofcable protection tubes ≤ Ø 30 mm.For horizontal mounting, an additional suspension can be fitted to the mounting bracket usingthreaded rod M 10/.. through a Ø 11 mm hole.In addition, a screw distance clamp SASS 30 can be attached at the front.Through outlets in the horizontal support surface, it is possible to mount up to 4 clamps. B(K) 12 - 90 (depending on size) in register installation.Wire mesh tray fixing clamp GRKHV 173 E3 on request.

Fixing clamp for wire mesh trayhorizontal

for fixing of wire mesh tray onto flange (max. 20 mm) of horizontal steel beam


GRKH 153 F

153 101 0,5 1 SK 8X25 FGRKH 187 F 187 135 0,5 1 SK 8X25 F

F

F


supportlength

L1

loadrating

F at L=1/2

incl. accessories

mm mm kN

smallestpackaging

unit

10 pc.10 pc.

EANcode

000098000111

Weightin kg

per 100

pc.

41,1447,06

MTC 21

Bolting torque: 15 Nm

An alternating arrangement of the J-hook bolts ensures a reliable mounting of the wire mesh tray atthe fixing clamp.

Fixing clamp for wire mesh trayvertical

for fixing of wire mesh tray onto flange (max. 20 mm) of horizontal steel beam


GRKV 132 F

132 99 0,5 1 SK 8X25 FGRKV 166 F 166 133 0,5 1 SK 8X25 F

F

F


supportlength

L1

loadrating

F at L=1/2

incl. accessories

mm mm kN

smallestpackaging

unit

10 pc.10 pc.

EANcode

000081000074

Weightin kg

per 100

pc.

42,949,5

MTC 21

Bolting torque: 15 Nm

An alternating arrangement of the J-hook bolts ensures a reliable mounting of the wire mesh tray atthe fixing clamp.

Beam clamp

for horizontal clamp fastening of mesh cable trays with at least two longitudinal floor wiresand a central longitudinal wire spacing of ≤ 50 mm on steel girder flanges with a Thickness of ≤20 mm

Used for: Angled mesh cable tray GRL 60.090, mesh cable trays GR..., GRS..., GRCI 50.050 andMTC... from width 100 mm

GRK 25

1 SK 8x25 FF


unit

50 pc.

EANcode

280902

Weightin kg

per 100

pc.

18,29

MTC 21

MTC 12


Beam clampincl. slotted shoulder screw M8

Depending on the application different fixing material will be used.

for beam profiles with parallel flanges or slanted flanges with a maximum inclination of 14% as well assupply line to the consumers

PKS M6/10-40 F

6 - 35 6 1,8 1,6PKS M8/10-40 F 6 - 35 8 1,8 1,6PKS M8/10-40 E3

6 - 35 8 1,8 1,6PKS M8/10-40 E5

6 - 35 8 1,8 1,6

F

FE3

E5

Model No. thicknessof flange (t)

ThreadM

vertical nominal load F1

vertical nominal load F2

mm kN kN

smallestpackaging

unit

25 pc.25 pc.25 pc.25 pc.

EANcode

133871077571126866126873

Weightin kg

per 100

pc.

20,2721,2019,4019,59

Bolting torque: 4 NmWrench size 13

Threaded rod, M6

M 6/1000

1000 4.6 4 SMU 6M 6/1000 E3

1000 1.4301 4 SMU 6 E3V

E3

Model No. LengthL

resistanceclass

incl.accessories

mm

smallestpackaging

unit

25 pc.25 pc.

EANcode

919420107544

Weightin kg

per 100

pc.

21,7218,77

Threaded rod, M8

M 8/1000

1000 4.6 4 SMU 8M 8/1000 E3

1000 1.4301 4 SMU 8 E3V

E3

Model No. LengthL

resistanceclass

incl.accessories

mm

smallestpackaging

unit

25 pc.25 pc.

EANcode

203505107568

Weightin kg

per 100

pc.

35,135,1

Threaded rod, M10

M 10/1000

1000 4.6 4 SMU 10M 10/1000 E3

1000 1.4301 4 SMU 10 E3V

E3

Model No. LengthL

resistanceclass

incl. accessories

mm

smallestpackaging

unit

25 pc.25 pc.

EANcode

203208769902

Weightin kg

per 100

pc.

56,4056,42

Center hanger for threaded rodtwo-parts

for centered hanging of wire mesh tray (max. width of 300 mm) and a centered distance of cross-steelwire of 50 mm

Used for: Wire mesh cable tray MTC… from width 100 mm

GRKB 10

GRKB 10 F

S

F


unit

25 pc.25 pc.

EANcode

280704280759

Weightin kg

per 100

pc.

1010

MTC 23

MTC 13

Trapeze hanger for wire mesh tray

for a two-sided suspension by threaded rod

Used for: Wire mesh tray MTC … up to maximum 6 mm wire thickness

GTAB 8 S

GTAB 8 E3

GTAB 8 E4

GTAB 8 FG

S

E3

E4

FG


unit

20 pc.20 pc.20 pc.20 pc.

EANcode

057924136629136636136643

Weightin kg

per 100

pc.

7,07,05,77,0

MTC 23

The trapeze hanger be used between length-wire and cross-wire. For safety reason against poppingout from the trapeze hanger the lugs have to be turned-over with a screw driver.

Center support for wire mesh trayC-bracket

Used for: Wire mesh tray MTC 30.050, 30.100, 54.050 and 54.100

GTCB 50/100 S

0,2GTCB 50/100 FG

0,2GTCB 50/100 E3

0,2

S

F

E3

Model No. loadratingat L/2

kN

smallestpackaging

unit

25 pc.25 pc.25 pc.

EANcode

136674136667136650

Weightin kg

per 100

pc.

202020

MTC 23

The load rating shown is only valid for proper anchorage in the building structure.

Extension for wire mesh hanger

for extending of ceiling suspension/mounting bracket for wire mesh tray GRHB 30/150 F

GRTS 30/3 F

3000F

Model No. LengthL

mm

smallestpackaging

unit

1 pc.

EANcode

895182

Weightin kg

per 100

pc.

250,92

Mounting bracket for wire mesh traysingle

When large loads are placed in suspended wire mesh trays (> 200 mm) they must besupported against deflection.

for wall mounting of wire mesh tray (max. 100 mm)for centered or alternated arranged ceiling suspension for wire mesh tray (max. 200 mm) inconjunction with one GRTS 30/3 F or one GRSH 30/… Ffor double-sided arranged ceiling suspension for wire mesh tray (>.300 mm) in conjunction with GRTS30/3 F or GRSH 30/… F

GRHB 30/150 F

71,5 86,5F

Model No. Height H

LengthL

mm mm

smallestpackaging

unit

20 pc.

EANcode

895168

Weightin kg

per 100

pc.

12,34

Boltless fixing in the bottom of the wire mesh tray.Use an extra J-hook GRSM 6 F to protect wire mesh tray from tilting. Please order separately.

MTC 14


Standard hanger for wire mesh tray

for centered or staggered in reverse order hanging of wire mesh tray

GRSH 30 F

170 86,5 1 FLM 8X16 FF

Model No. Height H

LengthL

incl. accessories

mm mm

smallestpackaging

unit

10 pc.

EANcode

895199

Weightin kg

per 100

pc.

29,64

MTC 24

Boltless fixing in the bottom of the wire mesh tray.Use an extra J-hook GRSM 6 F to protect wire mesh tray from tilting. Please order separately.

Overhead hanger for wire mesh tray

for mounting on wall or ceiling

GRHS 30/150 F

150GRHS 30/200 F 200GRHS 30/300 F 300GRHS 30/400 F 400GRHS 30/500 F 500GRHS 30/600 F 600GRHS 30/700 F 700GRHS 30/800 F 800GRHS 30/900 F 900GRHS 30/1000 F 1000

F

FFFFFFFFF

Model No. LengthL

mm

smallestpackaging

unit

20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.1 pc.1 pc.1 pc.1 pc.

EANcode

909421909445909469909483909506909520909544909568909582909605

Weightin kg

per 100

pc.

14,8419,0025,0033,0044,2848,0055,0063,0070,0088,00

MTC 24

Hanger and wall bracketmedium-weight

Warning : instructions for non-standard lengths. For more details please refer to the mountinginstructions

for wall installation and overhead hangers

KTAM 100

60 110 1,2 2 FLM 6X12KTAM 150 60 160 1,2 2 FLM 6X12KTAM 200 80 210 1,2 2 FLM 6X12KTAM 300 82 320 1,5 2 FLM 6X12KTAM 400 82 420 1,5 2 FLM 6X12KTAM 100 F

60 110 1,2 2 FLM 6X12 FKTAM 150 F 60 160 1,2 2 FLM 6X12 FKTAM 200 F 80 210 1,2 2 FLM 6X12 FKTAM 300 F 82 320 1,5 2 FLM 6X12 FKTAM 400 F 82 420 1,5 2 FLM 6X12 FKTAM 100 E3

60 110 1,2 2 FLM 6X12 E3KTAM 150 E3 60 160 1,2 2 FLM 6X12 E3KTAM 200 E3 80 210 1,2 2 FLM 6X12 E3KTAM 250 E3 80 260 1,2 2 FLM 6X12 E3KTAM 300 E3 85 310 1,2 2 FLM 6X12 E3KTAM 100 E5

60 110 1,2 2 FLM 6X12 E5KTAM 150 E5 60 160 1,2 2 FLM 6X12 E5KTAM 200 E5 80 210 1,2 2 FLM 6X12 E5KTAM 300 E5 85 310 1,2 2 FLM 6X12 E5KTAM 400 E5 115 410 1,2 2 FLM 6X12 E5

S

SSSSF

FFFF

E3

E3E3E3E3E5

E5E5E5E5

Model No. Height H

LengthL

loadratingat L/2

incl. accessories

mm mm kN

smallestpackaging

unit

20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.

EANcode

186303078530186402186501186600968459078578968466968473968480840304078592840328078608840342728305078615728404728503728602

Weightin kg

per 100

pc.

16,4121,9430,2744,2050,2817,7623,8433,0148,3855,2716,3721,9330,3237,0750,7816,5122,1330,6144,3373,59

MTC 20 MTC 25

The load-bearing capacity specifications apply only if sufficiently anchored to the load-bearingsubstrate or if mounted on suspended supports in accordance with the regulations.

MTC 15

Overhead hangerU-profile

Load in F kN

Def

lect

ion

f in

mm

For an approximate symmetric load distribution a lateral tilting is rarely measurable.

Total length = length of U-profile inclusive head plateHUF 50/200 offers limited space for mounting cable trays (length of overhead hanger - heightof bracket). Two-sided arrangement (horizontal) on the same height due to the spacer UD 24 ispossible.Used for: Bracket KTUL …., KTUM … and KTDL …

Load chart: Deflection of overhead hanger (onesided load)

HUF 50/200

201HUF 50/250 255HUF 50/300 301HUF 50/400 401HUF 50/500 501HUF 50/600 601HUF 50/200 E3

204HUF 50/300 E3 304HUF 50/400 E3 404HUF 50/500 E3 504HUF 50/600 E3 604HUF 50/200 E5

204HUF 50/300 E5 304HUF 50/400 E5 404HUF 50/500 E5 504

F

FFFFF

E3

E3E3E3E3E5

E5E5E5


mm

smallestpackaging

unit

20 pc.20 pc.20 pc.20 pc.20 pc.10 pc.20 pc.20 pc.20 pc.20 pc.10 pc.20 pc.20 pc.20 pc.20 pc.

EANcode

168705168804168903169009169108169207327300327409327508327607327621727506727605727704727803

Weightin kg

per 100

pc.

48,1855,6861,9775,7889,57

103,9640,8253,4466,0678,6891,3141,2353,9866,7379,48

For static reasons brackets have to be installed at least 50 mm above hangers end. This willalso guarantee an easy mounting of the protective cap.

Spacer

for double-sided arrangement of the outriggers horizontally at the same height

Used for: Bracket KTUL... and KTUM... on hanging standards HUF 50/... and U 50/... Profiles at oneheight

UD 24

1 FLM 10X50UD 24 E3

1 FLM 10X50 E3S

E3


unit

20 pc.20 pc.

EANcode

171033327652

Weightin kg

per 100

17,9818,48

MTC 16


Bracketmedium-weight

Used for: Overhead hanger HUF 50/… and HDUF 50/…

KTUM 100

73 105 1,2 FLM:2 6X12, 1 10X25 FKTUM 150 73 155 1,2 FLM:2 6X12, 1 10X25 FKTUM 200 73 205 1,2 FLM:2 6X12, 1 10X25 FKTUM 300 73 305 1,2 FLM:2 6X12, 1 10X25 FKTUM 400 83 405 1,2 FLM:2 6X12, 1 10X25 FKTUM 100 F

73 105 1,2 FLM:2 6X12 F, 1 10X25 FKTUM 150 F 73 155 1,2 FLM:2 6X12 F, 1 10X25 FKTUM 200 F 73 205 1,2 FLM:2 6X12 F, 1 10X25 FKTUM 300 F 73 305 1,2 FLM:2 6X12 F, 1 10X25 FKTUM 400 F 83 405 1,2 FLM:2 6X12 F, 1 10X25 FKTUM 100 E3

73 105 1,2 FLM: 2 6X12 E3, 1 10X25 E3KTUM 200 E3 73 205 1,2 FLM: 2 6X12 E3, 1 10X25 E3KTUM 300 E3 83 305 1,2 FLM: 2 6X12 E3, 1 10X25 E3KTUM 400 E3 83 405 1,2 FLM: 2 6X12 E3, 1 10X25 E3KTUM 100 E5

73 105 1,2 FLM:2 6X12 E5, 1 10X25 E5KTUM 200 E5 73 205 1,2 FLM:2 6X12 E5, 1 10X25 E5KTUM 300 E5 83 305 1,2 FLM:2 6X12 E5, 1 10X25 E5KTUM 400 E5 83 405 1,2 FLM:2 6X12 E5, 1 10X25 E5

S

SSSSF

FFFF

E3

E3E3E3E5

E5E5E5

Model No. Height H

LengthL

loadratingat L/2

incl. accessories

mm mm kN

smallestpackaging

unit

20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.20 pc.

EANcode

170425170432170449170463170487968497968503968510968534968541329021329045329069329083728220728244728268728282

Weightin kg

per 100

pc.

21,4526,2731,0846,8673,2822,9328,2333,5250,8879,9421,5131,2059,5873,6721,5731,3559,9074,26

MTC 20

The loads shown are valid only for an installation on overhead hangers according to instructions.The load ratings refer to the mounting of the bracket onto an overhead hanger with only one bolt.

For model KTUM 300 E3, …E5 as well as for KTUM 400, … F, …. E3, … E5 height (H2) is 66 mm.

Fixing clip for wire mesh tray

for attaching wire mesh tray to any kind of brackets

Used for: Bracket KTUM 100-400 and bracket KTAM 100-400

GRBA 40 E2

3,5 - 4,8 7x40E2

Model No. for steel wire diameter

slotted holeLL

mm mm

smallestpackaging

unit

50 pc.

EANcode

948390

Weightin kg

per 100

pc.

0,58

MTC 25

The fixing clip will be inserted into the lugs of slot hole perforation of the bracket and tilted. Analternating arrangement of the fixing clips on the bracket ensures a reliable mounting of the wire meshtray.

Wire mesh cable tray ground terminal

The thrust piece and the clamping plate are made of tinned brass, the screw iselectro galvanized, blue passivated

for the connection of equipotential bonding / earthing cables 6-35 mm²for use in dry interiors


GTEKM 6X25

6 - 35

Model No. Section

mm²

smallestpackaging

unit

25 pc.

EANcode

058068

Weightin kg

per 100

pc.

5,1

MTC 17

Ground terminalwith serrated lock washer and toothed flange nut M6 according to DIN EN 1661 completely made ofstainless steel

to ensure equipotential bonding of cable trays and all common cable trays with holes Ø 6 - Ø 7 mmfor the connection of equipotential bonding / earthing cables, stranded or solidfor indoor and outdoor use

Used for: Wire mesh cable tray MTC…. and cable trays

MTEKM 4X10 E10

4 - 10N E10

Model No. Section

mm²

smallestpackaging

unit

25 pc.

EANcode

165643

Weightin kg

per 100

2,45

In the case of an insulated conductor, the insulation must be removed over a length of 30 mm, it ispossible to tension 2 x 6 mm².

Ground terminalincluding threaded rod M 12, 2 washers Ø 30mm and screws M 6x12

The clamp and the M12 threaded rod are made of tinned brass, the washers are made ofstainless steel.Made of copper-coated aluminium alloy and the M 6X12 screw made of galvanic galvanizedsteel, blue passivated.

to ensure equipotential bonding in mesh cable trays with a central longitudinal wire spacingof max. 25 mm as well as all common cable trays with bores Ø 6 - Ø 7 mmfor the connection of equipotential bonding / earthing cables, stranded or solidfor indoor and outdoor use

Used for: Wire mesh cable tray MTC…. and cable trays

MTEKM 6X25 MS

6 - 25N MS

Model No. Section

mm²

smallestpackaging

unit

20 pc.

EANcode

168125

Weightin kg

per 100

3,85

In the case of an insulated conductor, the insulation must be removed over a length of 30 mm.

J-Hook boltincl. serrated flange nut, acc. DIN EN 1661

for mounting of wire mesh trays

GRSM 6 V

6GRSM 6 F

6GRSM 6 E3

6

V

F

E3

Model No. ThreadM

smallestpackaging

unit

50 pc.50 pc.50 pc.

EANcode

280506940554343799

Weightin kg

per 100

pc.

1,161,161,15

MTC 21 MTC 24

Slotted pan head bolt, M6, acc. DIN EN ISO 1580incl. serrated flange nut, acc. DIN EN 1661

ZKM 6X16

6 16V

Model No. ThreadM

LengthL

mm

smallestpackaging

unit

100 pc.

EANcode

461103

Weightin kg

per 100

pc.

0,1

MTC 18


Mushroom head bolt, similar DIN 603incl. serrated flange nut, acc. DIN EN 1661

FLM 6X20 G

6 20 -FLM 6X20 FG

6 20 -FLM 6X20 E4

6 20 -

G

FG

E4

Model No. ThreadM

LengthL

resistanceclass

mm

smallestpackaging

unit

100 pc.100 pc.100 pc.

EANcode

057948057931101825

Weightin kg

per 100

pc.

0,90,70,9

Mushroom head bolt, similar DIN 603incl. serrated flange nut, acc. DIN EN 1661

FLM 8X16 F

8 16 8.8F

Model No. ThreadM

LengthL

resistanceclass

mm

smallestpackaging

unit

50 pc.

EANcode

206704

Weightin kg

per 100

pc.

2,09

Cover for wire mesh tray in roof shapeinclination angle 7,5°

to snap-fit on U-shaped wire mesh cable trays

Used for: Wire mesh cable tray MTC….

Cover for MTCC… E4 upon your request

MTCC 50/7.5° S

62,5 0,50MTCC 100/7.5° S 111,0 0,75MTCC 150/7.5° S 161,0 0,75MTCC 200/7.5° S 213,0 0,75MTCC 300/7.5° S 315,0 0,90MTCC 400/7.5° S 416,0 0,90MTCC 500/7.5° S 517,0 1,00MTCC 600/7.5° S 617,0 1,00MTCC 50/7.5° F

62,5 0,50MTCC 100/7.5° F 111,0 0,75MTCC 150/7.5° F 161,0 0,75MTCC 200/7.5° F 213,0 0,75MTCC 300/7.5° F 315,0 0,90MTCC 400/7.5° F 416,0 0,90MTCC 500/7.5° F 517,0 1,00MTCC 600/7.5° F 617,0 1,00MTCC 50/7.5° E3

62,5 0,50MTCC 100/7.5° E3 111,0 0,80MTCC 150/7.5° E3 161,0 0,80MTCC 200/7.5° E3 213,0 0,80MTCC 300/7.5° E3 315,0 0,80MTCC 400/7.5° E3 416,0 0,80MTCC 500/7.5° E3 517,0 1,00MTCC 600/7.5° E3 617,0 1,00MTCC 50/7.5° E4 62,5 0,50MTCC 100/7.5° E4 111,0 0,80MTCC 150/7.5° E4 161,0 0,80MTCC 200/7.5° E4 213,0 0,80MTCC 300/7.5° E4 315,0 0,80MTCC 400/7.5° E4 416,0 0,80MTCC 500/7.5° E4 517,0 1,00MTCC 600/7.5° E4 617,0 1,00

NNNNNNNN

NNNNNNNN

NNNNNNNNNNNNNNNN

S

SSSSSSSF

FFFFFFF

E3

E3E3E3E3E3E3E3E4E4E4E4E4E4E4E4

Model No. WidthB

Materialthickness

(t)

mm mm

smallestpackaging

unit

3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m

EANcode

154975154654154999154661154678154685155026155033154982154692155019154715154722154739155040155057155064155071155088155095155118155125155132155149159727159666159673159680159697159710159734159741

Weightin kg

per 100

37,8286,04

115,61146,02248,69314,86429,58508,7641,6194,64

127,17160,62273,56346,34472,54559,6338,0592,44

124,19156,83222,48281,67432,32512,0038,4493,38

125,44158,42224,74284,52436,69517,18

MTC 19

Retaining bracket for wire mesh tray cover

for fixing cable tray covers on U-shaped cable trays with at least two longitudinal wires on the sides

Used for: Cover for wire mesh tray GRD…., GRD… /7,5° and MTCC… /7,5°

GRDHL 30 S

GRDHL 30 F

GRDHL 30 E3

S

F

E3


unit

50 pc.50 pc.50 pc.

EANcode

126996075676092857

Weightin kg

per 100

3,273,603,29

The cover retaining strap was designed to additionally secure the lids for vertical installation. Inaddition, it serves as wind protection in the outside area for vertical and horizontal installation.For fastening to the vertical cross wires of the cable trays, please order hook bolts GRSM 6separately.

Installation instructions

Installation Bracket GTMB 651. GTMB 65 is used for centered hanging the wire mesh tray with

threaded rod, up to a width of 300 mm. 2. GTMB 65 is also used as a wall bracket for trays with up to 100 mm

width and two side wires.

Wall and Cantilever fixing GTWAB 501. GTWAB 50 is used as a wall bracket up to trays with 100 mm width.2. GTWAB 50 is also used for fixing the wire mesh tray onto a cantilever arm

bracket KTAM/KTUM with nut & bolt.

wall mounting cantilever mounting

Installation instruction of cable mesh tray quick connector MTCQC 54…1. Push together the ends of the cable mesh tray without welded-on

connector at a distance.2. Push the side clamps of the connector at an angle to the cross wires of

both cable mesh trays, then clip in the opposite side – done.3. Quick connection for horizontal lengthwise cable mesh trays.

Universal joiner GRHKM 6X15This universal joiner is one way of joining individual shorter parts or to manufacture bends.

MTC 20

INFORMATION

Shim GRK 25For installation on horizontal steel girders with a maximal thickness of 20 mm. The clamping is effecuated by two floor side wires of the cable mesh tray with a center distance of 50 mm max. between the horizontal wires.

Mounting clamp horizontal GRKH...In order to install horizontal steel girder flanges with a maximal strength of 20 mm. Due to mutual bracing of the clip bolts, a tilt protection of the cable tray to the clamp is achieved.

The combination of cable mesh tray wall mounting and boom mounting GTWAB 50 and the shim GRK 25, a clamping assembly of cable mesh trays MTC 30.050 and MTC 54.050 is possible with only one floor side wire on horizontal steel girder flanges with a flange strength of 20 mm. This arrangement achieves a tilt protection cable tray to shim.

Mounting clamp vertical GRKV...In order to install vertical steel girder flanges with a maximal strength of 20 mm. Due to mutual bracing of the clip bolts, a tilt protection of the cable tray to the clamp is achieved.


MTC 21


Through outlets in the horizontal support surface, it is possible to install up to 4 clamps B(K) 12 - 90 (depending on size) in register installation. Rectangular recesses in the legs of the terminal also allow the installation of cable protection tubes ≤ Ø 30 mm.

An alternating arrangement of the hook head bolt guarantees a secure fastening of the wire mesh tray to the fixing clamp for wire mesh tray. Here, too, a suspension at the barrier strip clamp tip can be made using threaded rod M 10/....

For horizontal mounting, an additional suspension can be made by means of threaded rod M 10/... at the barrier strip clamp tip through the Ø 11 mm hole. A SASS 30 screw distance clamp can also be attached at the front.

Fixing clamp GRKHV 173 S

MTC 22

INFORMATION


Dual threaded rod hanging bracket GTAB 8To ensure a proper fixing lengthwise the GTAB 8 needs to be mounted at a cross-section of length and cross wires meet (1). By bending the bottom parts with a screwdriver or fixing with bolt & nut the wire mesh tray cannot slide out.

Threaded rod hanging bracket GRKB 10GRKB 10 is used for centred hanging of the wire mesh tray with threaded rod, up to a width of 300 mm.

Central hanger GTCB 50/1001. Usage for MTC 30.050 and MTC 54.050, the side wire hooks into the

vertical flap of the GTCB 50/100 while the bottom wire sits into the groove of the short arm. Secured anchorage with a push of a screwdriver.

2. To prevent levering out, turn the bracket with a screwdriver.3. Both longitudinal floor units of the MTC 30.100 / MTC 54.100 are required

for anchoring to the longer shanks of the central suspension. Fold down both stirrups (2.) to fix them in place.

Wire Mesh Tray cable outlet GTKA 50For wire mesh trays with a cross wire spacing of 100 mm and/or a longitudinal wire spacing of 50 mm, a width ≥ 100 mm and a max. wire diameter of 6 mm.

screwdriver

M 6/...

MTC 23


Fixing clamp GRWGK 10The fixing clamp is suitable for mesh cable trays with wire thicknesses of 3 mm - 6 mm and a longitudinal wire spacing of max. 50 mm. 1. For wall mounting of mesh cable trays up to max. 100 mm width with at

least two longitudinal wires on the sides.

Fixing clamp GRWGK 103. GRWGK 10 can be used for hanging wire mesh trays up to 300 mm

width and two bottom wires with a max. wire distance of 50 mm.

Standard Hanging bracket GRSH 30GRSH 30 is used for hanging wire mesh trays from the ceiling in the middle or left & right of the tray. There must be two bottom length wires and the distance between them must be max. 50 mm. This bracket together with the GRSM 6 hook bolt (non-tilt effect) offers a very quick and efficient ceiling hanging option. Ideal for trays up to 200 mm width.

Fixing clamp GRWGK 102. For the floor fixing of wire mesh trays with a central longitudinal floor

wire spacing of max. 50 mm and at least two longitudinal wires. Suitable for wire mesh trays from a width of 100 mm.

Hanging bracket GRHS 30/…GRHS 30 is used for fixing wire mesh trays onto a wall or the ceiling. With a hook bolt GRSM 6 on the top side wire and the extra support on the bottom side wire mesh trays with bigger widths can be mounted solid. In particular, for wire mesh trays ≥ 300 mm.

Standard Hanging bracket GRSH 30For trays with widths ≥ 300 mm you can use the GRSH 30 as shown below. You can use the wire mesh trays in a staggered formation also. Ideal for trays ≥ 300 mm.

GRHS 30/...

MTC 24

INFORMATION


Elbow 90° One Part – 3 different bendsThe Elbow 90° is a multifunctional connecting unit used to form vertical and horizontal bends with various radii.

Boltless Cantilever clip fixing GRBA 40 E2GRBA 40 E2 is used for a boltless fixing on a cantilever bracket KTAM... .  The clip sits into the perforation of the cantilever bracket. The tray then gets pushed into the clip, and clicks in to a secure fixing.Also, pictured fixing possibilities for GTMB 65 (see above).

Mounting plate RMP 130 For the attachment of junction and distribution boxes or screwed cable glands on cable trays and cable ladders as well as for the installation at cable trays with at least two lateral line wires.

Vertical OUT 90° Vertical IN 90°

Horizontal 90° Elbow

Number of segments for connecting unit MTCE 54MTCE 54.100 mm - 3 segmentsMTCE 54.150 mm - 3 segmentsMTCE 54.200 mm - 4 segmentsMTCE 54.300 mm - 4 segments

segments

1. Ø 29 mmfor cable glands with -  metric connection thread M 25 (1234M25…)

-  Pg-connection thread Pg 16 (1234P16…)

2. Ø 25,5 mmfor cable glands with -  metric connection thread M 25 (1234M25…)




4. Ø 22,6 mmfor cable glands with -  metric connection thread M 20 (1234M20…)




MTC 25

nieDAX GeneRAL TeRMS OF SALe AnD DeLiVeRY

I. GENERAL PROVISIONS1. The following terms of sale and delivery are valid for every contract entered into by the Buyer and Niedax regarding delivered goods. They are valid for all future

businesses even if they have not been expressly agreed upon again. Deviating purchasing terms of the buyer which are not expressly accepted by us, are not valid for Niedax. That applies also if Niedax has not expressly rejected them. The following terms are valid also if Niedax has executed the Buyer’s order without objections while knowing of his adverse or different purchase terms. Sales to private, i.e. non-business customers are not made.

2. All agreements between the Buyer and Niedax regarding the execution of the sales contracts are contained by writing in the contracts.3. If particular provisions are legally invalid, the whole contract shall remain validity regarding in the remaining parts, except for those cases where adherence to

the contract would be unacceptable for at least one contractual party.

II. PRICES AND TERMS OF PAYMENT1. The prices indicated are net, ex works, excluding packing, the respective VAT if applicable has to be added on top.2. Prices apply without packing costs for orders up to Euro 600 net (not including VAT). In the case of orders greater than Euro 600 net (not including VAT), we

deliver free of charge to the next goods station, including packing, for sealed collection in one consignment. Haulage at the place of reception is at the expense of the customer.

3. An additional charge of Euro 10 net (not including VAT) per order is levied on minimum orders of a value of less than Euro 100 net (small orders, not including VAT). The minimum-sized packing or packing drums are made to suit requirement and are only sold in complete packing units. A surcharge of Euro 5 net (not including VAT) to cover expenses is levied per unit (packing or packing drum) for orders that deviate from the standard packing unit sizes.

4. Delivery in parts is permitted if economically reasonable for the Buyer.5. If deliveries are to be made to construction sites, the costs for freight / transportation will be advanced by Niedax und will be invoiced to the Buyer if no freight-

free delivery is applicable or had been agreed.6. If not otherwise agreed, all payments have to be made at the latest 10 days after invoicing to allow a three per cent discount, 30 days after invoicing to allow a

two per cent discount and 45 days after invoicing net without deductions. This assumes that our invoice has not been dispatched before delivery of the goods; if that may be the case as an exception, the periods for payment shall be calculated on the day of delivery.

7. If the Buyer fails to fulfil his obligations to pay, e.g. does not honour a cheque or a bill payable or ceases his payments, or when circumstances become known that put his creditworthiness into question, then the entire residual debt shall become due, even if invoices exist that have a later maturity date or other agree-ments have been made regarding extension of the term of payment. In this case we shall not be obliged to make further deliveries unless the customer offers advanced payment before delivery. In the event that the customer does not offer cash payment, then we shall be entitled to claim damages for non-performance.

8. The Buyer can only set off against claims which are undisputed, accepted or legally ascertained.

III. DELIVERY TIMES, DELAY1. Compliance with set periods for deliveries presupposes the punctual submission of all the necessary documents and other obligations that are to be supplied

by the ordering party, If these preconditions are not promptly satisfied, then the periods of time shall be increased accordingly; this shall not apply if Niedax is responsible for the delay.

2. In case Niedax delays performance, the ordering party shall be entitled to demand damages limited to the foreseeable, typically occurring damage, except if the delay results from a deliberate or grossly negligent breach of contract or in case of fatal or bodily injury or injury to health, with Niedax having to take responsibility for respective acts committed by representatives and agents.

3. If the Buyer can prove damages resulting from the delay in delivery, he is entitled to claim compensation of 0.3 % for each full week of delay, but not more than a total of 15% of the price of the amount of delivery that could not be put to appropriate use because of the delay.

4. In case the dispatch or delivery are delayed at the request of the ordering party by more than a month after notification of readiness to deliver, it shall be pos-sible to invoice the ordering party for storage for each month commenced at a rate of 0.5%, but not more than a total of 5%, of the price of the objects to be delivered. The contract parties remain free to prove higher or lower storage costs.

5. If the delivery times are not observed as a consequence of force majeure, e.g., mobilization, war, insurrection, or similar events like strikes or lock-outs, then the periods of time shall be extended accordingly.

IV. PASSING OF RISK, RECEIPT, TAKING BACK1. The risk, including for carriage paid delivery, is passed to the ordering party as follows:

a) in the case of deliveries without mounting or installation, when they are handed over to the transport agent or to the ordering party in case of collection by themselves. At the request and expense of the ordering party deliveries will be insured by Niedax against the usual transport risks; b) in case of deliveries including mounting or installation the passing of risk is on the day of acceptance within the ordering party’s premises, or, if agreed, after a faultless test operation.

2. If the ordering party is responsible for delays in dispatch, delivery, the commencement or execution of the mounting or installation, acceptance at the ordering party’s premises or the trial operation, or if the ordering party delays acceptance for any other reason, then the risk shall be transferred to the ordering party.

3. The ordering party may not refuse to accept deliveries for the reason of slight defects.4. Returns of goods have to be coordinated with the concerned person dealing with the case. Articles which are especially produced and not fit for warehousing

are exempt from taking back.

V. RETENTION OF TITLE1. The delivered goods shall remain our property until all our claims arising from the business relationship have been settled. The delivered goods may only be

sold in the due course of business either for cash payment or by transferring our reservation of ownership to the buyer. They may not be pledged nor assigned nor transferred by the customer.

2. The Buyer may sell or utilize the goods subject to retention of title for proper business purposes, unless he is in delay of payment. The customer herewith assigns to us all his future claims from release of the reserved goods. This assignment shall apply both for the full value and for the partial value corresponding to our coownership share of the goods sold. The assignment shall remain valid until all our claims have been paid in full. We hereby accept this assignment. The thus originated sole or partial ownership will be kept by the Buyer on our behalf.

3. We authorize the Buyer revocably to collect payments regarding the assigned claims - as long as he continues to fulfil his obligations towards us and does not become bankrupt. The sums received shall be transferred to us immediately when our claims are due. This authorization can be revoked anytime if the Buyer does not adhere to his payment obligations. The Buyer is not entitled to assign the claims to other parties, e.g. in a system of debt collection by factoring, except if at the same time the factor accepts the obligation to pay the consideration directly to us as long as claims by us exist against the Buyer.

4. If the goods are combined or merged with other items, we gain co-ownership regarding the new item, corresponding to the value of our reserved goods in relation to the value of the other goods at the time of processing. If the goods subject to retention of title are processed by the customer, each processing takes place for us.

5. In the case of neglect of duty by the Buyer, esp. delay of payment, we are entitled to the retraction of the goods subject to retention of title as well as to the with-drawal from the affected deal. The performance of rectraction or of claiming the retention of the goods only means a withdrawal if we declare it expressly to be.

6. The customer shall immediately inform us of any third-party judicial enforcement measures against the reserved goods or claims assigned to us in advance. Such information must be accompanied by the documentation required for intervention.

0317

nieDAX GeneRAL TeRMS OF SALe AnD DeLiVeRY

VI. WARRANTY FOR MATERIAL DEFECTS AND LIABILITY1. Claims for defects can only be made if the Buyer adhered to his obligation under § 377 HGB to properly examine and if necessary notify Niedax of defects.2. In case of a defect, the Buyer has to give Niedax the opportunity for supplementary performance within reasonable time. The supplementary performance is

deemed failed after unsuccessful attempts, if not more attempts are appropriate and just and reasonable for the buyer, regarding the contractual item. If the supplementary performance has failed, the Buyer is entitled – notwithstanding possible claims regarding damages – to withdraw from the contract or to reduce the remuneration. Damages resulting from defects cannot be claimed before the supplementary performance has been attempted twice (at least) unsuccessfully, except regarding damages under Clause VIII.

3. Claims on the part of the Buyer for expenses necessary for the purpose of remedying defects, will be beared by Niedax assumed that they are necessary and are not increased because the object of delivery has afterwards been taken to a place other than the premises of the ordering party, unless such movement complies with its use in accordance with the regulations.

4. Claims for only minor deviation from the agreed quality cannot be accepted. We must therefore reject claims for only minor impairment to fitness for use, or for natural wear and tear, or for damage arising after the transfer of risk as a result of faulty or negligent handling, excessive stress, unsuitable operating materials, defective building works, unsuitable building ground, or occurring as a result of other external influences that have not been presumed according to the contract. In case the ordering party or a third party carries out inexpert repairs or changes, there no right for claims will be granted by Niedax for defects caused by these works or the consequences of them.

5. We are liable according to the law for damages to life, body and health that result from an intentional or negligent neglect of duty committed by us, our repre-sentatives or agents, as well as for damages that are fall within product liability laws. We are liable for damages not included in the first sentence which result from intentional or grossly negligent breaches of contract as well as in case of fraudulent concealment of a defect committed by us, our representatives or agents, following the legal provisions. In those last mentioned cases however our liability is limited to the foreseeable, typically occurring damage, except when we or our representatives or agents have acted intentionally.

6. We are liable for damages that are caused by us by slight negligent neglect of contractual obligations whose fulfillment is indispensable for the contractual performance and in whose compliance the Buyer fundamentally and justifiably trusts (fundamental contractual obligations). Our liability is however limited to damages that are typically related to the contract and foreseeable.

7. In accordance with § 478 BGB (Rückgriff des Unternehmers [Contractor’s Recourse, § 478 BGB]), the ordering party’s rights of recourse against Niedax only exist in so far as the ordering party has made no agreements with its supplier that extend beyond the legal claims for defects.

8. Claims for material defects are subject to a limitation period of 12 months. This restriction shall not apply in so far as the law prescribes longer periods in accordance with §§ 438, Par. 1 No. 2 (Bauwerke und Sachen für Bauwerke [Buildings and Items for Building]), 479 Par. 1 (Rückgriffsanspruch [Right of Re-course]) and 634a Par. 1 No. 2 (Baumängel [Building Defects]) of the BGB [German Civil Code], and in cases of injury to life, health or bodily injury, in case of an intentional or gross carelessness on the part of Niedax, and in case of fraudulent concealment of a defect.

VII. IMPOSSIBILITY; ADAPTATION OF CONTRACTS1. If delivery is impossible, the ordering party shall be entitled to demand compensation, unless Niedax is not responsible for the impossibility. The claim for da-

mages on the part of the ordering party is, however, limited to 15% of the value of that part of the delivery that cannot be put into appropriate operation due to the impossibility of delivery. This limitation shall not apply in so far as there is absolute liability in cases of intent or gross negligence or in the event of fatal or bodily injury or injury to health; this is not associated with any change in the burden of proof to the disadvantage of the ordering party. The right of the ordering party to withdraw from the contract remains unaffected.

2. If unforeseeable events in the sense of Item III No. 5 significantly change the economic importance or content of the delivery or have a significant effect on the working activities of Niedax, the contract shall be reasonably adapted respecting good faith. If this is not economically justifiable, Niedax shall have the right to withdraw from the contract. If he wishes to avail himself of this right to withdraw from the contract, then he shall undertake to inform the ordering party of the fact immediately, having determined the extent and consequences of the event; this shall also apply if an extension of the delivery time has first been agreed with the ordering party.

VIII. FURTHER CLAIMS TO DAMAGES1. Claims to damages and expenses by the Buyer (hereafter: damages), whatsoever the legal reason, especially resulting from a neglection of contractual ob-

ligations or from an unlawful act, are excluded.2. The aforesaid exclusion is not valid insofar as there is mandatory liability by law, e.g. under product liability law, in cases of intentional or grossly negligent acts,

damages to life, body and health and neglect of fundamental contractual obligations. Our liability regarding the neglect of fundamental contractual obligations is however limited to damages typically related to the contract and foreseeable, except with intentional or gross negligence and with damages to life, injuries, impacts on health. This is not associated with any change in the burden of proof to the disadvantage of the ordering party.

3. The Buyer’s claims to damages mentioned here in Art. VIII expire after the end of the limitation period according material defects under Article VI paragraph 8. In case of titles to claim according to the Product Liability Act the legal rules regarding the limitation period will apply.

4. The 12 months limitation period also applies to measures to remedy the damages, especially to product recalls.

IX. PLACE OF PERFORMANCE, OF JURISDICTION AND APPLICABLE LAW1. Place of performance of deliveries and payments is Linz am Rhein. The sole place of jurisdiction for all disputes arising directly or indirectly out of sales con-

tracts between Niedax and the Buyer (including action on a dishonored cheque or bill payable) shall be governed by the place of performance, too. Niedax shall, however, also be entitled to bring an action at the domicile of the ordering party.

2. The legal relationships between the contractual parties shall be governed exclusively by German substantive law, to the exclusion of the United Nations Con-vention on Contracts for the International Sale of Goods (CISG).

X. SETTLEMENT OF CONSUMER CLAIMSCompanies of NIEDAX GROUP do not enter into contractual relationships with consumers in accordance to § 310 fig. 3 BGB as our products are exclusively delivered to authorized distributors and commercial customers. For this reason we are not participating in any settlement procedure for claims from consumers in any Consumer Arbitration Centre. However, in accordance to the German law on alternative settlements of consumer claims we are obliged to inform about the relevant authority for settlement of consumer claims (Consumer Arbitration Centre):

Allgemeine Verbraucherschlichtungsstelle des Zentrums für Schlichtung e.V.Straßburger Str. 877694 KehlInternet: www.verbraucher-schlichter.de

As of 03/2017

NIEDAX GmbH & Co. KG . Asbacher Str. 141 . D-53545 Linz am Rhein bzw. Postfach 1286 . 53541 Linz/Rhein . ++49 (0) 2644 5606 - 0 . Fax - 13

0718InternatIonal SaleS agencIeSAustralianiedax australia Pty. ltd. level 28, 1 Market StreetSydney, nSW [email protected] . www.niedax.com.au

Belgiumniedax-Kleinhuis n.V.tulpenstraat 2B-9810 eke/nazarethtel: +32 92200790 . Fax: +32 [email protected]

Brazilniedax Sistemas de Bandejamento para cabos ltda.rua Verbo Divino, 1661, 3° andar, cjto. 32, sala 04chácara Santo antônio, 04719-002 São Paulotel: +55 19 38782566 . Fax: +55 19 [email protected]

BruneiJoffren Omar Company Sendirian BerhadHead Office Seria Lot 49-51 Sg. Bera light Industrial area Seria KB1933, negara Brunei Darussalamtel: +673 3223 863 . Fax: +673 3223 309

Bulgarianiedax BulgariaFilip-Kutev-Str. 137BG-1407 Sofiatel: +359 29624574 . Fax: +359 [email protected]

Chilechile niedax chile Spaamérico Vespucio norte 1385 - módulo 37Quilicura, Santiagotel: +56 232 [email protected] . www.niedax-group.com

Austrianiedax Kabelverlege-Systeme gmbHresselstraße 10a-2120 Wolkersdorftel: +43 2245901100 . Fax: +43 [email protected] . www.niedax.at

CroatiarS Kabel d.o.o.Savska cesta 41/VI, Poslovni to10144 Zagrebtel: +385 1 611 2038 . tel: +385 1 631 [email protected] . www.rs-kabel.hr

ChinaShanghai Huanye electronics co., ltd.room 1616, north Building no.1839 Qixin roadShanghai, china, 201100tel: +86 21 54130175 803 . Fax: +86 21 [email protected] . www.huanyechina.com

Netherlandsniedax-Kleinhuis B.V.Bijsterhuizen 20-05anl-6604 lH Wijchentel: +31 243788533 . Fax: +31 [email protected] . www.niedax.nl

EstoniaPoweram elektriseadmed oÜakadeemia tee 33, 12618 tallinn, estoniatel: +372 672 6833 . Fax: +372 672 [email protected] . www.poweram.ee

Franceniedax FranceParc d‘activités Washingtonav. de la ferme du roy, Fr-62404 Béthune cedextel.: +33 321 64 75 75 . Fax: +33 321 64 75 [email protected] . www.niedax-group.com

DenmarkDuelco a/SSystemvej 8-10DK-9200 aalborg SVtel: +45 70101007 . Fax: +45 [email protected] . www.duelco.dk

ItalyFemi-cZ S.p.a.Viale del lavoro, 1645100 rovigotel: +39 0425 470711 . Fax: +39 0425 [email protected] . www.femicz.it

Indianiedax cable Management Systems Pvt. ltd.# 1007, Prestige Meridian I, 29 Mahatma gandhi roadBangalore - 560 [email protected] . www.niedax.co.in

GCC-Statesniedax Middle east FZeP.o. Box 262461FZS2ac08, Jebel ali, Uae-Dubaitel: +9714 880 7970 . Fax: +9714 880 [email protected] . www.niedax.com

Ireland/UKniedax cMS ltd.clash Industrial estateIrl-tralee, co. Kerry, Irelandtel: +353 667128701 . Fax: +353 [email protected] . www.niedax-group.com

NorwayBVS aSIndustriveien 29 . n-2020 Skedsmokorsettel: +47 64838989 [email protected] www.niedax.no

PakistanIndustrial Supplies & engineering associatesPo BoX 8103 Baghbanpura lahore-9, P.o. code: 54920tel: +92 [email protected] . [email protected]

Russianiedax llcleningradsky Prospekt 76/4125315 Moskautel: +7 495 249 45 [email protected] . www.niedax-group.ru

Polandniedax-Kleinhuis Polska Sp.zo.o.ul. Zagòrska 133Pl-42-680 tarnowskie gòrytel: +48 323819810 . Fax: +48 [email protected] . www.niedax.pl

SerbiageMeX d.o.oZrenjanski put 103b11210 Belgradtel: +381 11 33181 . Fax: +381 11 [email protected]

Romanianiedax romania s.r.l.Soseana chitilei nr. 3, sector 1ro-012381 Bucurestitel: +40 216680280 . Fax: +40 216680280 [email protected] . www.niedax-group.com

SingaporeNiedax Asia Pacific Pte. Ltd.4 Battery road, Bank of china Building # 25-01Singapore [email protected]

Slovak Republicniedax Slowakia s.r.o.Pestovateľská 6SK-82104 Bratislavatel: +421 244630934 . Fax: +421 [email protected] . www.niedax.sk

SloweniaKabeltrade d.d.o.latkova vas 83B, 3312 Preboldtel: +386 3 620 24 [email protected]

Hungaryniedax Kereskedelmi Kft.Budafoki út 10.H-2030 Érdtel: +36 23521300 . Fax: +36 [email protected] . www.niedax-group.com

Thailandniedax (thailand) ltd.62/10 M6, t Samnaktorn, a. Ban changrayong 21130 thailandtel: +66 (33) 679 899 . Fax: +66 (33) 679 [email protected]

USAniedax Inc.2970 charter Streetcolumbus, oH 43228 USatel: +1 6149218469 . Fax: +1 [email protected] . www.niedaxusa.com

Spainniedax-Kleinhuis Ibèrica S.l.U.c/Italia 5 y 7e-28971 grinón (Madrid)tel: +34 918103197 . Fax: +34 [email protected] . www.niedax.com

Switzerlandniedax eBo Schweiz agWehreyering 21 PostfachcH-3930 Visptel: +41 279456868 . Fax: +41 [email protected]

VietnamNiedax Asia Pacific Pte. LtdHo chi Minh [email protected]

SwedenFasteus teknik aBMagasinsgatan 35S-43437 Kungsbackatel: +46 30051000 . Fax: +46 [email protected] . www.fasteus.se

LithuaniaJSc „Swelbalt“Sudmantu kaimas92498 Klaipèdos rajonastel: +370-46-300 100 . Fax: +370-46-300 [email protected] . www.swelbalt.lt

LetivaaS ernergoFIrMa JaUDaKrustpils street 119lV-1057 riga, latVIatel: +37 67725789 . Fax: +37 [email protected] . www.jauda.com

LuxembourgMinusines S.a.B.P. 2212; 8, rue Hogenbergl-1022 luxemburg-gasperichtel: +352 495858 . Fax: +352 [email protected] . www.minusines.lu

Israelerco ltD41 Hayozma St. P.o Box 12045ashdod 77000tel: +972 732 020 002 . Fax: +972 732 020 [email protected] . www.erco.co.il

KoreaHansung SystemrM # 301 nexvill, 1301-2, Baekseok-Dong, Ilsan-dong-gu, goyang-Si, Kyunggi-Do, Korea, 410-817tel: +82 31 908 [email protected]

Mexiconiedax de Mexico S.a. de c.V.calle San Bernardo 9acolonia Sanctorum cuautlancingo PueblaMexico c.P. 72730tel: +52.222.485.0586 & 485.0588 Fax: +52.222.485.0414 . [email protected]

Czech Republicniedax-Kleinhuis s.r.o.Palackeho 701cZ-27746 Veltrusytel: +42 0315781116 . Fax: +42 [email protected]

Please ask for the Certifications VDE/UL

Steel, galvanized according to nach DIN 50961/50979 und DIN EN ISO 2081, blued and powdercoated

Material Code: 1.4307Material Code: 1.4034

Niedax GmbH & Co. KGAsbacher Straße 141D-53545 Linz/Rhein

Postfach 1286D-53541 Linz/Rhein

Tel: +49 (0) 2644/5606-0Fax: +49 (0) 2644/5606-13

[email protected] N

X 00

100

02 G

B

mtc - niedax.de · mtc 5 wire mesh tray u-shaped, made of steel wires, spot-welded, with welded...

Documents