mps 3000 capacitacion
DESCRIPTION
Capacitación Relé de Protección MPS3000TRANSCRIPT
-
MPS 3000Motor Protection and Control Relay
-
Sumary
Protection Features Protection Function Wiring Diagrams Control Features Programacion
-
Protection Features
Voltage base protectionUnder-voltageOver-voltagePhase-lossPhase sequenceMaximum start time
-
Protection Features
Current base protectionsToo many startsUnder currentLoad increaseOver-current level 1 (Stall/Locked protection),Over-current level 2 (Short circuit) Thermal OverloadUnbalanced currentGround fault current.
-
Protection Features
Power based protectionsUnder PowerLow Power Factor
-
Protection Features
Temperature Based Up to 10 sensors (10 RTDs are standard)Based Up to optionally 6 RTDs + 4 thermistors
-
Protection Features
General based protection Control circuit fault (C only)Welded contact (C only)Three external faultsComm. Port Failure.
-
Protection Features
Analog Inputs based protection For external devices such as Vibration sensor.
-
Protection Features
Two levels for most faults Usually used for Alarm and Trip.
-
Wiring Diagram
-
Wiring Diagram
-
Control Features
Starting methodsDirect OnlineStar DeltaSoft StartersReversing
Two Speeds.
-
Control Features
Control TypesLocal and Remote
Port RS485Comunicaton Protocol (Modbus Serial)
-
Control Features
A Liquid Crystal Display (LCD), together with a keypad and LEDs enables user friendly interface
Unauthorized setting changes can easily be prevented by the correct use of the Authorized key input terminals or a dedicated parameter: PARAM. SETTING (LOCKED or NOT LOCKED)
-
Control Features
Measured data Calculated data Logic inputs Statistical data Fault data
-
Programacion
-
Programacion
-
Programacion
-
Programacion
-
Programacion
-
Programacion
-
Programacion