more than just nuts and bolts! “professionals serving professionals” new products ·...

“Professionals serving Professionals”

NEW PRODUCTS

Catalogue Supplement 4Q16

More Than Just Nuts and Bolts!

Protective Industrial Products. ..................................................................................... Pages 3-4

Watson Gloves .................................................................................................................. Page 4

Canadian Technical Tape .................................................................................................. Page 5

Makita Canada Inc. ...................................................................................................... Pages 5-7

North Safety Products ....................................................................................................... Page 7

Gray Tools ......................................................................................................................... Page 8

Apex Tool Canada Inc ....................................................................................................... Page 8

Century Wire & Cable. ....................................................................................................... Page 9

Norseman Drill & Tool ........................................................................................................ Page 9

Loctite. ............................................................................................................................... Page 9

Milwaukee Electric Tool .............................................................................................Page 10-16

www.boltsupply.com What’s New at The Bolt Supply House Ltd.“ P R O F E S S I O N A L S S E R V I N G P R O F E S S I O N A L S ”

Calgary (South), Alberta - Ph. (403) 287-0360 Fax (403) 287-3127

Calgary (North), Alberta - Ph. (403) 250-2658 Fax (403) 250-2677

Calgary (Foothills), Alberta - Ph. (403) 236-9000 Fax (403) 236-9006

Edmonton (North), Alberta - Ph. (780) 451-1220 Fax (780) 455-0237

Edmonton (South), Alberta - Ph. (780) 435-2747 Fax (780) 435-2847

Lethbridge, Alberta - Ph. (403) 328-8880 Fax (403) 328-8898

Medicine Hat, Alberta - Ph. (403) 527-7717 Fax (403) 527-0722

Ft. McMurray, Alberta - Ph. (780) 799-4580 Fax (780) 799-4582

Red Deer, Alberta - Ph. (403) 346-9393 Fax (403) 309-3373

Saskatoon, Saskatchewan - Ph. (306) 931-1960 Fax (306) 933-3139

Regina, Saskatchewan - Ph. (306) 721-5877 Fax (306) 721-5833

Prince Albert, Saskatchewan - Ph. (306) 922-3680 Fax (306) 922-3683

Winnipeg, Manitoba - Ph. (204) 694-2658 Fax (204) 694-5485

“Professionals serving Professionals”More Than Just Nuts and Bolts!

INDEX...

What’s New at The Bolt Supply House Ltd. www.boltsupply.com “ P R O F E S S I O N A L S S E R V I N G P R O F E S S I O N A L S ”

PROTECTIVE INDUSTRIAL PRODUCTSMaxiFlex® Cut™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers

Known and loved across the globe MaxiFlex® has become the world standard for precision handling gloves in dry environments. People have been asking us to make a cut resistant MaxiFlex® that’s still super thin, flexible, dexterous and comfortable. So we did. Here it is. We call it MaxiFlex® Cut™.FEATURES• Innovative fibres - we source our base

ingredients to develop our own unique high performance yarns and fibres that offer cut protection whilst maintaining high levels of comfort.

• Reinforcement - between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area.

• 360° breathability - patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today.

• Form, fit and feel - mimics the “hand at rest”, reducing hand fatigue and increasing comfort.

Part No. Description

PIP348743 MAXIFLEX CUT GRN W/BLK NITRILE EN3 GLOVE

• Latest knitting technology - utilized to produce smooth and rounded fingertips, improving fingertip sensitivity.

• Consistent liner penetration - from the nitrile, leaving only the soft liner resting against the skin.

• Optimized grip delivered through our micro-cup finish, allows for a controlled grip.

• All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation.

• This glove has been laundered prior to final packaging making it clean and safe for use.

• The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin.

• The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product.

• Made from component material which comply with Federal regulations for food contact, 21 CFR, 170-199

Size XS - XXXL

Designed and developed as a breathable glove, MaxiFlex® Ultimate™ has become the benchmark for precision handling in dry environments.FEATURES• MicroFoam Nitrile coatings are compatible

with light oils and will provide a good grip and excellent abrasion resistance

• Knit Wrist helps prevent dirt and debris from entering the glove• 100% Silicone-free• 360° Breathability - Patented micro-foam nitrile coating offers

360° breathability, making it the most breathable glove on the market today

• 25% Thinner - Than most foam nitrile gloves on the market while offering twice the mechanical performance

• Form, Fit and Feel - Mimics the “hand at rest”, reducing hand fatigue and increasing comfort

• Latest Knitting Technology - Utilized to produce smooth and

MaxiFlex® Ultimate™

Seamless Knit Nylon / Lycra Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers

rounded fingertips, improving fingertip sensitivity• Consistent Liner Penetration - From the nitrile, leaving only the

soft liner resting against the skin• Optimized Grip - The micro-cup finish allows for a controlled grip• All ingredients used in the manufacturing and construction of this

product are compliant with the REACH legislation• This glove has been laundered prior to final packaging making it

clean and safe for use• The Oeko-Tex® Association has evaluated and certified this

product as skin safe from the second it comes into contact with the skin

• The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product

• Made from component material which comply with Federal regulations for food contact, 21 CFR, 170-199

Size XS - XXXL


PIP34874 MAXIFLEX ULT GRY W/BLK NITRILE CTD GLOVE

Designed and developed as a 360° breathable cut resistant glove MaxiCut® Ultra™ combines high levels of cut protection with comfort, flexibility and dexterity for dry environments.

FEATURES• Innovative fibres - ATG® sources their base

ingredients to develop their own unique high performance yarns and fibers that offer cut protection while maintaining high levels of comfort.

• Reinforcement - between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area.

• 360° breathability - patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today.

• Form, fit and feel - mimics the “hand at rest”, reducing hand fatigue and increasing comfort.

• Latest knitting technology - utilized to produce smooth and

MaxiCut®Ultra™

Seamless Knit Engineered Yarn Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers

rounded fingertips, improving fingertip sensitivity.• Consistent liner penetration - from the nitrile, leaving only the soft

liner resting against the skin.• Optimized grip delivered through our micro-cup finish, allows for a

controlled grip.• All ingredients used in the manufacturing and construction of this

product are compliant with the REACH legislation.• This glove has been laundered prior to final packaging making it

clean and safe for use.• The Oeko-Tex® Association has evaluated and certified this product

as skin safe from the second it comes into contact with the skin.• The Skin Health Alliance has awarded professional dermatological

accreditation following review of the scientific dossier behind this product.

• Made from component materials which comply with Federal regulations for food contact 21 CFR 170-199

• Silicone FreeSize XS - XXXL


PIP443745 MAXICUT ULTRA BLUE W/BLK NITRILE EN5 GLOVE



WG102WS KEVLAR SLEEVE 10” 2 PLY O/S

WATSON GLOVES


WG353TPR STEALTH HELLCAT TPR ARAMID FOAM NITRILE


WG2756R RED DOG HD COWHIDE LTHR WELDING GLOVES OS

FEATURES & BENEFITS1 Two layer construction, 100% Kevlar® sleeve is cut and flame

resistant (up to 100°C) offering superior protection and durability2 10” in length3 Stay-up band ensure sleeves remain in placeAPPLICATIONSLight to Medium FabricationAssembly and InspectionAutomotive

• HPPE shell with ANSI A2 cut resistance for extra protection

• Foam nitrile coating provides abrasion and puncture resistance with superior wet/dry grip

• TPR on back and fingers provides impact protection

• Extended snug-fitting seamless knit wrist keeps out dirt and debris

Size S - XXL

FEATURES & BENEFITS• Rugged and heavy duty split cowhide

leather• Reinforced leather welted seams• Classic gunn cut design has seams set

away from the working area of the hand• Cotton fleece liningSize OS

102WS Kevlar® Sleeve

353TPR Stealth Hellcat2756R Red Dog


WG300KV ATLAS 300KV KEVLAR SKINNY DIP

FEATURES & BENEFITS• Kevlar® seamless knit shell• Natural rubber latex coating• Sure-grip crinkle finish• Open back design• Ergonomic form• Snug-fitting wristSize Large

300KV Atlas® Skinny Dip®

PROTECTIVE INDUSTRIAL PRODUCTS

Ideal for material handling, glass handling operations, fishing industries, sanitation, general maintenance, woodworking, waste handling and recycling.FEATURES• Seamless knit construction provides comfort without sacrificing dexterity• Kevlar® & Lycra fiber shell provides high tensile strength relative to its weight, is inherently cut resistant and will not melt, ignite or conduct electricity• Nitrile coated palm and fingertips for excellent dry grip and will not absorb liquids into the coating• Knit Wrist helps prevent dirt and debris from entering the glove• Cotton color binding denotes sizing• Launderable for extended life and to reduce replacement costsKevlarDuPont™ Kevlar® has the Power of PerformanceKevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar® licensed manufacturers. Size XS - XXL

G-Tek Kev™

Seamless Knit Kevlar® / Lycra Glove with Nitrile Coated Smooth Grip on Palm & Fingers - Medium Weight


PIP09K1450 G-TEK KEVLAR/LYCRA EN2 NITRILE CTD GLOVE

Ideal for electronics, glass cutting, sheet metal handling, general duty, parts assembly and sharp small parts handling.FEATURES• Seamless construction offers increased

comfort and breathability• PolyKor™ blended shell is lightweight

and provides excellent dexterity, tactile sensitivity and cut resistance

• Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip

• Knit Wrist helps prevent dirt and debris from entering the glove• Cotton color binding denotes sizing• Washable, resistant to chemicals, water, and ultraviolet lightPolyKor™ Engineered YarnProducts constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.Size XS - XXXL

G-Tek PolyKor™

Seamless Knit PolyKor™ Blended Glove with Polyurethane Coated Smooth Grip on Palm & Fingers


PIP16150 G-TEK CR, POLYKOR SHELL CTD PALM EN3 GLOVE


CANADIAN TECHNICAL TAPE


BST2 2 1/2” BLUE SHEATHING TAPE 60MM X 55M (219-08)

Application• Sealing of joints and seams of PE Barrier. • Tape has to be pressed firmly on surface. • Should be applied on clean, dry surfaces.

Benefits• Outstanding adhesion on polyethylene. • High shear adhesive provides aggressive

contact. • Strong and durable holding power. • Prevents air infiltration. • Water and moisture resistant. • Mold resistant. • Excellent resistance to UV. • CCMC evaluated, see Report # 14018-R

219-08 - Blue Contractor’s sheathing tape for PE vapor barrier

MAKITA CANADA INC.

Trigger Switch With Lock-On Button (AC/DC)• Labyrinth construction features

a complex series of channels to prevent penetration of dust and debris into the field and armature for maximum operational life

• Motor winding protection features “Zig-Zag” varnish on the armature and hardened powder on the field coils to act as an impenetrable barrier to dust and debris

• Rotatable gear housing can be positioned at every 90° for optimal positioning

• Removable side handle can be mounted on left or right side of tool

• Ergonomic soft rubber grip design for vibration absorption and comfortable operation

STANDARD EQUIPMENT INCLUDES: 6” Depressed Centre Wheel, Wheel Cover, Side Handle, Inner Flange, Lock Nut , Lock Nut Wrench 28.

Fast And Effortless Installation of 3/8” and 1/2” Threaded Rod• Unique design secures threaded

rod for fast and easy installation without damaging threads

• 1/4” hex shank suitable for use with Makita Impact Drivers, Driver-Drills and Hammer Driver-Drills*

• Available for 3/8” (part no. B-51611) and 1/2” (part no. B-51627) threaded rod

• Available 1/Pk• Ideal companion product to Makita Hollow Sockets* (DO NOT OPERATE IN HAMMER MODE)

High-Quality Circular Saw Blades5/8” Arbor

6” Angle Grinder

Threaded Rod Sockets

8-1/4” Circular Saw Blades


MAKA9453010 7-1/4” CT BLADE 24T 5/8”


MAKD21521 8-1/4” CT BLADE 24T 5/8”


MAKB51611 THREADED SOCKET BIT 3/8”

MAKB51627 THREADED SOCKET BIT 1/2”

EFFICIENCY: Ultra-coated blades provide reduced pitch build-upDESIGN : “M” shaped tooth has two cutting points to provide the speed of 24 tooth with the finish of 48 toothDURABILITY : High grade C-3, fine-grain Tungsten carbide tips for longer durabilityDESIGN : Greater wear area and more cutting tips increase the life up to 2X more than a traditional bladeINCLUDES : 7-1/4” 24T Ultra-Coated Framing Blade, 10/pkAbout ModelThe Makita 7-1/4 in. 24T Ultra-Coated Framing Blade is ideal for a full range of wood cutting applications. The ultra-coated blade resists pitch build-up, and the high-grade fine-grain Tungsten Carbide tips are engineered for improved durability and longer blade life. Makita’s exclusive “M”-shaped blade tooth has two cutting points, so it delivers the cutting speed of a 24-tooth blade, but with the finish of a 48-tooth blade.

Features•Ultra-coated blades provide reduced pitch build-up• “M” shaped tooth has two cutting points to provide the speed of 24 tooth with the finish of 48 tooth• High grade C-3, fine-grain Tungsten carbide tips for longer durability• Greater wear area and more cutting tips increase the life up to 2X more than a traditional framing blade• Exclusive dual-beveled tooth face has two 10° angles

7-1/4” 24T Carbide-Tipped Ultra-Coated Framing Blade, 10/pk

Backing: U.V. Treated polypropylene filmAdhesive: High Performance solvent based acrylic Total Thickness: 0.103mm • 4.1 milAdhesion: 66 N/100 mm • 60 oz/in Tensile Strenght: 525 N/100mm • 30 lb/inApplication Temperature: -18 °C to 50 °C • 0 °F to 122 °FTemperature Resistance: -40 °C to 100°C • -40 °F to 212 °FVOC (Volatile Organic Compound) content: Estimated 1%Moisture Vapor Transmission Rate: 3.9x10-9 g/Pa s m2Water Penetration Rate: 0.009 g/100 in2Air Permeance Rate: 0.0010 L/s m2Meets Canadian Specification: CCMC #14018-R


MAK9016DBZ 6” ANGLE GRINDER TRIGGER LOCK ON


MAKITA CANADA INC.

High-Performance Fan For Increased Air Circulation Or Cooling On Heavy Duty Jobsites

• 13” diameter fan provides maximum air volume for superior performance on heavy duty jobsites

• Automatic swing feature and manual tilt features allow fan to be positioned at any angle for maximum jobsite versatility

• Frame design reduces noise and can be easily removed for cleaning and maintenance

• Low / medium / high air speed settings• 3-stage automatic timer (1, 2 or 4 hours)• Rigid metal pipe stand with rubber bumpers provides

stability during operation and protects material or workpiece from damage

• Carrying handle for easy transportation

Cordless or Electric Jobsite Fan


MAKDCF300Z 18V LXT JOBSITE FAN (TOOL ONLY)

Electric BrakeCompact & Lightweight With Well Balanced Design• Designed for cutting channel, corrugated steel,

conduit, pipe, sheet metal, square tubing, angle iron and more

• LED Job Light illuminates cutting area• Large Lock-Off Safety Lever prevents accidental

startup• Stainless Steel Base Plate• Ergonomic Soft Rubber Grip for vibration absorption

and comfortable operationINCLUDES: Tool Only. Battery and Charger Sold Separately. 5-3/8” C.T. Saw

Blade 30T (A-95037), Hex Wrench 5, Safety Goggles.

5-3/8” Cordless Metal Cutting Saw


MAKDCS550Z 18V LXT 5-3/8” METAL CUTTING SAW TOOL ONLY

SHIPPED WITH MIXING PADDLE AND BUCKET!Variable Speed Feature Suitable For Professional Mixing of a Variety of Materials Includes:•Side Handle (152492-0)•Drill Chuck (763078-1)•Chuck Key (763411-7A)• Variable speed feature enables operator to

adjust speed to suit various materials and applications

• Ideal for mixing Thin-Set mortar, Drywall compound, Masonry, Paint and more!

• Increased continuous input rating, Rated amperage and no load speed for added performance and efficiency

• Improved motor cooling for added durability and operational efficiency• Aluminum gear housing• Conveniently located Forward / Reverse Switch• Lock-on button enables easy continuous operation• Rear handle rotates 360° with 24 locking positions• Removable side handle• Lanyard loop provides secure attachment of Safety / Security Lanyards• Ergonomic soft rubber grip for vibration absorption and comfortable operation

1/2” Spade Drill Kit


MAKDS4012X1 1/2” VSR DRILL W/MUD MIXING KIT

Thumb Switch with Lock-OnHigh Performance And Efficiency For Heavy-Duty Grinding Applications

• Automatic torque Drive Technology (ADT) feature adjusts the torque and speed according to the load condition, enabling rapid movement between high speed and high torque applications

• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions

• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged

use in manufacturing / production applications• Battery fuel gauge indicates approximate remaining battery power• Anti-restart feature prevents accidental start up of tool during battery

changing when switch is locked in the on position• Soft start feature gradually increases speed to eliminate start up shock• Electronic current limiter protects motor from accidental overload• Battery protection system provides over-discharge, temperature and circuit

protection for enhanced performance, battery cycle life and overall battery life

• Integrated dust screens act as additional protection against dust, dirt and debris

• Slim, ergonomic soft rubber grip design for vibration absorption and comfortable operation

INCLUDES: Tool Only. Battery and Charger Sold Separately. 5” Depressed Centre Wheel (D-20797), Toolless Wheel Cover, Side Handle, Lock Nut Wrench 28, Inner Flange 45, Lock Nut 5/8”-45

5” Angle Grinder with Brushless Motor


MAKDGA504Z 18V LXT BRUSHLESS 5” GRINDER SLIDE SWITCH T/O

Two Stage Safety Paddle Switch, Electric BrakeHigh Performance And Efficiency For Heavy-Duty Grinding Applications• Automatic torque Drive Technology (ADT) feature adjusts the torque and

speed according to the load condition, enabling rapid movement between high speed and high torque applications

• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions

• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged

use in manufacturing / production applications• Battery fuel gauge indicates approximate remaining battery power• Anti-restart feature prevents accidental start up of tool during battery

changing when switch is locked in the on position• Soft start feature gradually increases speed to eliminate start up shock• Electronic current limiter protects motor from accidental overload• Electric brake stops wheel or disc 3-5 seconds after switch is released for

increased operator safety• Battery protection system provides over-discharge, temperature

and circuit protection for enhanced performance, battery cycle life and overall battery life

• Integrated dust screens act as additional protection against dust, dirt and debris

• Slim, ergonomic soft rubber grip design for vibration absorption and comfortable operation

INCLUDES: Tool Only. Battery and Charger Sold Separately. 5” Depressed Centre Wheel, Toolless Wheel Cover, Side Handle, Lock Nut Wrench, Inner Flange 45B, Lock Nut 5/8”-45

5” Angle Grinder with Brushless Motor


MAKDGA508Z 18V LXT BRUSHLESS 5” GRINDER PADDLE SWTCH T/O

Charges 7.2V - 18V Ni-Cad, Ni-MH and Li-Ion Slide Style Batteries• Charges 18V 3.0 Ah Li-Ion battery BL1830 in just 22 minutes!• Charges 18V 4.0 Ah Li-Ion battery BL1840B in just 36 minutes!• Charges 18V 5.0 Ah Li-Ion battery BL1850B in just 45 minutes! • 3 Active Controls System (Current, Voltage & Temperature) provides

an optimal charge and ensures battery cannot be overcharged or overheated during the charging process

• Central Processing Unit (CPU) in battery communicates with charger to analyze battery and charge according to its unique condition

• Forced Air Cooling Fan keeps battery at optimum charging temperature and prevents over heating

• Digital Power Display indicates condition of battery and current charge level (-80%, +80%, 100%)

• Use with Adapter ADP04 - Part No. #193949-2 - to charge pod/stick style batteries

18V Li-Ion Rapid Charger


MAKDC18RC CHARGER DC18RC


MAKITA CANADA INC.

NORTH SAFETY PRODUCTS LTD.

Accepts 18V BL1815N / BL1830 / BL1840 / BL1850 Li-Ion batteries• Dual port design enables two batteries to be charge

simultaneously• Optimum charging system regulates thermal, voltage

and current during charging cycle to ensure battery cannot be over-charged or over-heated during the charging process

• Central Processing Unit (CPU) in battery communicates with charger to analyze battery and charge according to its unique condition

• Forced Air Cooling Fan keeps battery at optimum charging temperature and prevents over heating

• Digital Power Display indicates condition of battery and current charge level (-80%, +80%, 100%)

• USB port enables convenient charging of mobile devices on the job site• Charges 2 x 18V Li-Ion compact batteries in 15 minutes!• Charges 2 x 18V Li-Ion 3.0Ah batteries in 22 minutes!• Charges 2 x 18V Li-Ion 4.0Ah batteries in 36 minutes!• Charges 2 x 18V Li-Ion 5.0Ah batteries in 45 minutes!

Uvex Livewire sealed eyewear delivers the fit, performance and protection required in extreme environments, protecting workers against intense wind, sun, dirt, dust and debris, as well as high heat and humidity. With 10X longer-lasting anti-fog performance, and a precision, fit-tested foam-lined frame that defies debris, Uvex Livewire sealed eyewear is engineered for the extreme. To outfit even more of your team, there’s also a prescription frame option.

Wrap-around lens provides exceptional peripheral vision and protection. Flexible fingers adjust to most nasal profiles. Elastomer browguard deflects impact. Adjustable temples and lens inclination.

Features Bluetooth® Compatibility For Wireless Jobsite Use

• USB charging port enables convenient charging of mobile devices on the jobsite

• Operates on 7.2V - 18V slide and pod style Makita battery (battery not included) and AC or DC power sources

• Digital AM / FM Tuner with LCD Backlit Display and 10 pre-sets (5 AM / 5 FM)

• Dual auxiliary outlets suitable for MP3 players• IP64 rated for maximum weather and water resistance

suitable for jobsite or sports / recreational use• Rugged protective design with expanded rubber

bumpers and front metal cage• Two alarms, runs up to 35 hours on a single charge (with 5.0 Ah battery)• Swivel mount, soft bend antenna prevents breakage and/or loss• Swivelling carrying handle with soft rubber grip• AC Adapter - TBD(Bluetooth® is a registered trademark of Bluetooth® SIG)SPECIFICATIONSBattery: 7.2V - 18V Li-IonDimensions (LxWxH): 10-3/8” x 6-3/8” x 17” (257 x 163 x 431 mm) Net Weight: 9.7 lbs. (4.4 Kg)

18V Li-Ion Rapid Charger

Uvex Livewire™ Sealed Eyewar Uvex Genesis

Cordless or Electric Jobsite Radio with Bluetooth®

Variable 2-Speed, ReversibleFeatures Brushless DC Motor• eXtreme Protection Technology (XPT) offers

maximum protection against dust, debris and liquids for optimal performance in extreme conditions

• Battery fuel gauge indicates approximate remaining battery power

• Brushless DC motor with high power to weight and size ratio

• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications

• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life

• 21 clutch settings deliver up to 1,090 in. lbs. of torque• All metal gears for more efficient power transmission• Ultra-compact design (only 8-1/8” long)• Dual LED job lights with afterglow feature• Improved ergonomic soft rubber grip design for vibration absorption and

comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold

INCLUDES: Tool Only. Batteries and Charger sold separately. Side Handle, Deux Double Ended Bits, Bit Holder, Stopper Pole, Keyless Chuck, Hook

Variable Speed, ReversibleLightweight, 3 Mode Rotary HammerSDS-PLUS Shank Hammer & Rotation / Hammer Only / Rotation Only• Torque limiter stops bit rotation if bit jams for

increased operator safety and enhanced tool protection

• Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact

• 40 angle bit positions enable chisels to be positioned at optimum angle of operation

• Rubber housing bumper protects mode selector switch and gear housing from damage

• One touch sliding chuck enables quick and easy bit change• Ergonomic soft rubber grip design for vibration absorption and comfortable

operationINCLUDES: Tool Only. Batteries and Charger Sold Separately. Depth Gauge, Side Handle

1/2” Cordless Hammer Drill / Driver with Brushless Motor

15/16” Cordless Rotary Hammer Drill


MAKDC18RD CHARGER DC18RD


S2600HS UVEX LIVEWIRE BLACK FRAME, CLEAR HS LENS

S2601HS UVEX LIVEWIRE BLACK FRAME, ESPRESSO HS LENS


S3200HS UVEX GENESIS BLK FRM, CLEAR HS LENS

S3201HS UVEX GENESIS BLK FRM, ESPRESSO HS LENS

Replacement Lens

S6900HS UVEX GENESIS CLEAR HYDROSHIELD REPL LENS

S6901HS UVEX GENESIS ESPRESSO HYDROSHIELD REPL LENS


MAKDMR108 JOBSITE RADIO BLUETOOTH CORDLESS OR ELEC T/O


MAKDHP481Z 18V LXT BRUSHLESS 1/2” HAMMER DRIVER DRILL T/O


MAKDHR241Z 18V LXT 15/16” ROTARY HAMMER KIT (TOOL ONLY)


NORTH SAFETY PRODUCTS LTD.

Extended wrap-around lens for extra cheek and extra side protection. Soft flexible nose fingers conform to fit a variety of nasal profiles. Adjustable temples and lens inclination.

Futuristic, low profile design for chemical splash and impact. Toric lens provides superior optics and peripheral vision. Quick adjust headband

Uvex Genesis XC Uvex Stealth


S3300HS UVEX GENESIS XC BLK FRM, CLEAR HS LENS

S3301HS UVEX GENESIS XC BLK FRM, GRAY HS LENS

Replacement Lens

S6950HS UVEX GENESIS XC CLEAR HYDROSHIELD REPL LENS

S6951HS UVEX GENESIS XC GRAY HYDROSHIELD REPL LENS


S3960HS UVEX STEALTH GOGGLE GRAY BODY CLEAR HS LENS

S3961HS UVEX STEALTH GOGGLE GRAY BODY/GRAY HS LENS

Replacement Lens

S700HS UVEX STEALTH CLEAR HYDROSHIELD REPL LENS

S701HS UVEX STEALTH GRAY HYDROSHIELD REPL LENS

Floating lens design offers flexibility and fit. Ultra-lightweight at 27.5 grams for all day comfort. Secure wrap-around brow expands to fit a wide range of users.

Uvex Protégé


S4200HS UVEX PROTEGE BLK FRM, CLEAR HS LENS

S4201HS UVEX PROTEGE BLK FRM, GRAY HS LENS

• Open Four-Arm Frame Design Protects Blade, Does Not Trap Dirt in Case• Lightweight But Strong Case is Easy to Handle and Rewind• Two-Material Grip is Comfortable to Use• Hi-Viz® Orange Case is Easy to Find on the Job Site• Folding End Hook for True-Zero Measurements• Yellow Clad Fiberglass Blade Impervious to Moisture• Engineer’S Blade - 10Ths and 100Ths of Feet Plus Feet• Blade Style C2

1/2” x 200’ Engineer’s Hi-Viz® Orange Fiberglass Tape Measure, 10ths 100ths


LUFKFE200D TAPE,FBGL,1/2”X200’,OPEN REEL,ENGR

APEX TOOL CANADA INC.

Square Drive (inches): 3/8Capacity (in/lbs): 30 - 250Capacity (Nm): 4 - 28.8Increments (in/lbs): 1.00Increments (Nm): 0.11Head Style: Fixed RatchetNo. of Teeth: 36.00Overall Length (inches): 12-1/2”

Square Drive (inches): 1/2Capacity (in/lbs): 30-250Capacity (Nm): 47.5-345.8Increments (in/lbs):1.00Increments (Nm): 1.40Head Style: Fixed RatchetNo. of Teeth: 36Overall Length (inches): 22”

#82250 - 3/8” Dr. Micro-adjustable Fixed Head Torque Wrench

#83250 - 1/2” Dr. Micro-adjustable Fixed Head Torque Wrench


GRAY82250 TORQUE WRENCH 3/8” DR. 250 FT/LBS


GRAY83250 TORQUE WRENCH 1/2” DR. 250 FT/LBS

GRAY TOOLS CANADA INC.


Pro Lock mechanical connector was designed to prevent all extension cords with standard straight blade 15A-125V Plugs and Connectors from pulling apart. Our Pro Lock™ connector eliminates the problem of accidental disconnects that result in the unnecessary loss of power.All heavy duty extension cords (12/3 and 10/3) can use our Pro Lock Connectors to ensure these cords from pulling apart. Features:• Specially designed automatic locking

feature: insert male blades and pins into the Pro Lock connector and push together to lock; pull the collar down to unlock.

• No accidental disconnects.• For extra safety and strength, we solder all our connections.• Lighted Amber Power Check connector indicates there is power running

through the cord.

Pro Lock - For Secure & Safe Connections


PROLOCKBL PRO LOCK MECHANICAL CONNECTOR BLUE

CENTURY WIRE & CABLE

LOCTITE

LOCTITE 567 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application to the part. It prevents galling on stainless steel and can withstand temperatures up to 480°F (250°C) versus 400°F previously (200°C). Cures on lightly contaminated surfaces and does not require a primer on inactive metals.Excellent for high pressure applications: locks and seals tapered metal, pipe threads and fittings. Ideal for stainless steel, aluminum, galvanized metal and other inert metals. Disassembles with hand tools.Features and Benefits • General purpose, low strength liquid thread sealant for sealing metal threads• Prevents leaks due to vibrational loosening and other stresses• Temperature resistance up to 480°F (250°C)• Controlled Strength for easy disassembly• Excellent chemical resistance• Easy to apply• Cures on active and inactive metals• Lubricates to avoid galling on stainless steel fittings• NSF/ANSI 61 Approved• UL and ULC Approved

Loctite® 567™ High Temperature Thread Sealant is a general purpose instant thread sealant for taper/taper threads and fittings.


LOC2087067 THREAD SEALANT 567HIGH TEMP 50 ML TUBE



LOCTITE® 518™ Gasket Sealant is a medium-strength gasket sealant which cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Seals up to 300°F, fills gaps up to 0.05” and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service.Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a form-in-place gasket on rigid flanged connections, e.g. transmissions, gear box, and engine casings.

Improved formula provides these additional properties:• Medium-strength, flexible anaerobic flange gasket• For active and inactive rigid metal flanges• Cures through minor surface contamination• Adapts to flange surface irregularities and gaps up to 0.25 mm• Gel-type consistency • Seals instantly against low pressure• Reduces inventory costs – no need for large inventory of cut

gaskets• Resists high pressure when fully cured• No compression set or misaligned gaskets• Easy to automate• Eliminates manual assembly of conventional gaskets, reduces process costs

Recently Improved - LOCTITE® 518™ has better cure on contaminated surfaces, increased flexibility and adhesion and improved cure on inactive metals such as aluminum.


LOC2096061 #518 FLANGE SEALANT/ GASKET ELIMINATOR 300ML

M35 Increased hardness for tough jobs.Similar to M2, 6% cobalt added to increase heat resistance.

Type 14, M35 Cobalt Cutters Gold Finish


NORS16901 6 PC M35 COBALT ANNULAR CUTTER SET SB-5 TYPE 14

NORSEMAN DRILL & TOOL

• We use high impact polycarbonate on both housing & collar to guarantee hard service, extra-heavy duty use.

• Pro Lock Connectors fit all standard 15A-125V U-Ground ends.• Available in carded blister packs for consumers or in bulk units for faster

assembly.• Available color: Blue

Specifications:• Temperature Range: -40°F to +160°F.• Pull Strength: 80 Lbs horizontally or vertically.• Custom cord strain relief helps reduce cord tension and excess bending.• UL Listed and cUL for Canada.


Features • TRUEVIEW™ high definition light output • Milwaukee® designed optic maximizes

performance • Spot-flood sliding beam adjustment • Dual function switch for momentary or lock-on use • 3 output modes (high, low, strobe) • M12™ fuel gauge with low battery indication• Ergonomic grip with knurled texture • Includes lanyard for secure gripping • 6000 series aluminum, type II anodized finish • IP54 ingress protection

M12™ LED Metal Flashlight


MILW235520 M12 LED METAL FLASHLIGHT

What’s included (1) M18 FUEL™ 1-9/16” SDS Max

Hammer Drill (Tool Only) (2) M18™ REDLITHIUM™ HIGH

DEMAND™ 9.0 Battery Pack (1) M18™ & M12™ Rapid Charge Station (1) Depth Rod(1) Side Handle(1) Carrying CaseFeatures • Milwaukee® POWERSTATE™ Brushless Motor provides more

power, more run-time, and longer life.• The Milwaukee® REDLITHIUM™ Battery Pack is the most durable

pack on the market delivering more run-time, power and longer battery life.

• REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.

• As fast as corded.• Corded durability.• Over 20 minutes of chipping.

M18 FUEL™ 1-9/16” SDS Max Hammer Drill Kit


MILW271722HD M18 FUEL 1-9/16” SDS MAX HAMMER 2 BATT KIT

Features • REDLINK™ Intelligence: Provides optimized

performance and overload protection using total system communication between tool, battery and charger

• Best-in-Class Construction: Offers long-lasting performance and durability

• All-Weather Performance: Delivers fade-free power in extreme jobsite conditions

• Versatility: Powers 70+ Milwaukee M12™ cordless solutions

M12™ REDLITHIUM™ 3.0 Compact Battery Pack


MILW48112430 M12 RED LITHIUM 3.0 COMPACT BATTERY PACK

Features • REDLINK™ Intelligence: Provides optimized

performance and overload protection using total system communication between tool, battery and charger


• All-Weather Performance: Delivers fade-free power in extreme jobsite conditions

• Versatility: Powers 70+ Milwaukee M12™ cordless solutions

M12™ REDLITHIUM™ XC6.0 Extended Capacity Battery Pack


MILW48112460 M12 RED LITHIUM XC6.0 EXT CAPAC BATTERY PACK

Features • REDLINK™ Intelligence: Provides

optimized performance and overload protection using total system communication between tool, battery and charger


• Fuel gauge onboard: Displays remaining runtime for less downtime on the job

• All-Weather Performance: Delivers fade free power in extreme jobsite conditions

• Versatility: Powers more than 100 Milwaukee® M18™ cordless power tools

M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Battery Pack


MILW48111890 M18 RED LITHIUM HIGH DEMAND 9.0 BATTERY PACK







M18™ REDLITHIUM™ XC6.0 Battery Pack


MILW48111860 M18 RED LITHIUM XC6.0 EXT CAPAC BATTERY PACK

MILWAUKEE ELECTRIC TOOL




MILW48207063 SDS+2CT 3/4” X 8” X 10”

MILW48207401 SDS+2CT 5/32” X 4” X 6”

MILW48207452 SDS+2CT 3/8” X 6” X 8”

MILW48207473 SDS+2CT 1/2” X 8” X 10”

MILW48207602 SDS+2CT 5/8” X 6” X 8”

Features • Enhanced Rebar Guards provide increased durability • Breaker Points lead to faster drilling speeds • Variable Flute for Up to 20% more Holes per Charge in Cordless

Rotary Hammers • Centering Tip for exact spot drilling • Wear Mark Indicators to show end of life and when bit no longer

meets the ANSI requirement • Reinforced Flutes for minimized vibration and maximum durability

SDS-PLUS 2CTMILW48207401

MILW48207452

MILW48207602

Features • Nylon Bond Blade Protection• 5-Point Reinforced Frame• Finger Stop - Protects Finger during

Blade Retraction• Dual Magnets - Prevents Roll off when

Measuring Steel Studs, EMT and Threaded Rod

• Blueprint Scale - Calculates 1/4” and 1/8” Drawings

• Wire Form Belt Clip - Reduces Pocket Tearing

• 2-Sided Printing - Increases Measurement Readability

• Up to 9’ Standout

Magnetic Tape Measures


MILW48227116 16 FTMAGNETIC TAPE MEASURE

MILW48227125 25 FT MAGNETIC TAPE MEASURE



MILW48227216 5M/16 FT MAGNETIC TAPE MEASURE

MILW48227225 8M/26 FT MAGNETIC TAPE MEASURE

MILW48227225MILW48227216

MILW48227135MILW48227130

MILW48227125MILW48227116







• The M18™ & M12™ Rapid Charger charges packs up to 40% faster, reducing downtime and maximizing productivity

M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Starter Kit


MILW48591890 M18 RED LITHIUM HIGH DEMAND 9.0 STARTER KIT

Features • For use with drop-in anchors• Stopping Shoulder to Drill Accurate Depths

Repeatedly• Patented Flute Geometry to Remove Debris

Rapidly and Maximize Impact Energy• Centering Tip to Reduce Bit Walking and

Create Exact Spot Drilling

Stop Bit SDS-PLUS


MILW48207652 1/2” X 13/16” SHORT STOP BIT SDS-PLUS

MILW48207653 1/2” X 1-11/16” STOP BIT SDS-PLUS

MILW48207652

MILW48207653

Features • SDS-MAX Shank• 4-Cutter Head• Highest quality carbide maximizes material pulverization• Optimized flutes provide fastest debris extraction for faster

drillingOverviewMilwaukee®’s SDS-Max 4-Cutter Rotary Hammer Drill bits feature a 4-Cutter 4x90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

1” X 17” SDS-MAX 4-Cutter


MILW48203953 SDSMAX 4CT 1” X 12 X 17”



What’s included (1) M12™ Heated Jacket - (Jacket Only)(1) M12 REDLITHIUM™ 2.0 Compact Battery Pack(1) M12™ Lithium-ion Battery Charger(1) M12™ Battery Holder with 2.1A USB ChargerFeatures• Washer and dryer safe• Up to (8) hours of run-time with M12™ REDLITHIUM™ 2.0 Compact

Battery Pack• One-touch LED controller with (3) heat settings per heat zone (chest

and back zone can be adjusted independently of front hand pocket zone)

• ToughShell™ Stretch Polyester delivers 5X Longer Life and wind/water resistance

• FreeFlex™ Mobility Gussets provide enhanced mobility • Adjustable cuffs and waist with drop tail extended back• High loft insulation to trap heat (3) outer zip pockets, (1) inner zip pocket, (1) low-profile battery pocketOverviewPowered by M12™ REDLITHIUM™ Battery Technology, Milwaukee® M12™ Heated Jackets use carbon fiber heating elements to create and distribute heat to the chest, back, and front hand pockets. For use in abrasive environments, ToughShell™ Stretch Polyester delivers 5X Longer Life than previous softshell jackets, and provides wind and water resistance to survive the elements.

M12™ Heated Jacket Kits

Size S- 3X


MILW201B212 M12 BLACK HEAT JACKET KIT

MILW201B20 M12 BLACK HEAT JACKET ONLY

MILW201G21 M12 GRAY HEAT JACKET KIT

MILW201G20 M12 GRAY HEAT JACKET ONLY

MILW201R21 M12 RED HEAT JACKET KIT

MILW201R20 M12 RED HEAT JACKET ONLY

MILW201R21MILW201R20

MILW201G21MILW201G20

MILW201B212MILW201B20

What’s Included (1) M12™ Heated Jacket - Realtree Xtra® (Jacket Only) (1) M12 REDLITHIUM™ 2.0 Compact Battery Pack(1) M12™ Lithium-ion Battery Charger (1) M12™ Battery Holder with 2.1A USB ChargerFeatures• Washer and dryer safe• Up to (8) hours of run-time with M12™ REDLITHIUM™ 2.0

Compact Battery Pack (not included)• One-touch LED controller with (3) heat settings per heat zone

(chest and back zone can be adjusted independently of front hand pocket zone)

• QuietShell Stretch Polyester reduces noise from movement and provides wind/water resistance

• FreeFlex™ Mobility Gussets provide enhanced mobility

• Adjustable cuffs and waist with drop tail extended back

• High loft insulation to trap heat (3) outer zip pockets, (1) inner zip pocket, (1) low-profile battery pocket

Size S- 3X


MILW221C21 M12 XTRA HEAT JACKET KIT

MILW221C20 M12 XTRA HEAT JACKET ONLY

M12™ Heated Jacket - Realtree Xtra® KitWhat’s Included (1) M12 REDLITHIUM™ 2.0 Compact Battery Pack(1) M12™ Lithium-ion Battery Charger(1) M12™ Battery Holder with 2.1A USB ChargerFeatures• Washer and dryer safe• Up to (8) hours of run-time with M12™ REDLITHIUM™ 2.0

Compact Battery Pack• One-touch LED controller with (3) heat

settings per heat zone (chest and back zone can be adjusted independently of front hand pocket zone)

• Wind and water resistant polyester softshell

• High loft insulation to trap heat • Thumb-hole cuffs(2) outer zip pockets, (1) inner zip pocket, (1) low-profile battery pocket

Size S- 2X


MILW231B21 M12 WOMEN HEAT JACK KIT

M12™ Heated Women’s Jacket Kit - Black



What’s Included (1) M12™ 3-in-1 Heated Jacket - Black (251B-20)(1) M12 REDLITHIUM™ 2.0 Compact Battery Pack (1) M12™ Lithium-ion Battery Charger(1) M12™ Battery Holder with 2.1A USB ChargerFeatures• Washer and dryer safe• Up to (8) hours of run-time with M12™

REDLITHIUM™ 2.0 Compact Battery Pack • One -touch LED controller with (3) heat

settings per heat zone (chest and back zone can be adjusted independently of front hand pocket zone)

• GridIron™ Ripstop Polyester Outlasts 12oz cotton duck by 3X, and provides wind/water resistance FreeFlex™ Mobility Gussets provide enhanced mobility

• Riveted and reinforced pocket edges, and tarnish resistant metal zippers

• Integrated rib knit cuffs, exterior storm flap, and drop tail extended back

(4) large outer pockets, (1) quick-access pencil pocket, (2) large inner pockets, (1) inner zip pocket, (1) low-profile battery pocket

Size S- 2X


MILW251B21 M12 BLK 3-1 WRK JACKET KIT

MILW251B20 M12 BLK 3-1 WRK JACKET ONLY

M12™ 3-in-1 Heated Jacket Kit - BlackFeatures• GridIron™ Ripstop Polyester Outlasts 12oz cotton duck by 3X • FreeFlex™ Mobility Gussets provide enhanced mobility • Wind and water resistant • 100g of high-loft insulation • Riveted and reinforced pocket edges, and

tarnish resistant metal zippers • Fitted hood provides full range of vision • Rib knit cuffs and waist keep cold air out(2) large outer pockets, (1) quick-access sleeve pocket, (1) inner zip pocketOverviewEngineered to battle the jobsite and survive the elements, Milwaukee’s Hooded Jacket is built for tradesman who can’t let cold slow them down. Focused on providing reinforcement in areas where traditional workwear fails, GridIron™ 900 Denier Ripstop Polyester Outlasts 12oz cotton duck by 3X against abrasion and tearing. Combined with large riveted and reinforced utility pockets and a tarnish resistant metal zipper, this jacket won’t quit before the day is over. FreeFlex™ Mobility Gussets across the back and a fitted hood designed to provide full range of vision make sure that the Milwaukee® Hooded Jacket won’t get in the way of the work on a cold weather job.

Size S- 3X


MILW252B BLACK WRK HOOD JACKET

Milwaukee® Hooded Jacket - Black

What’s included (1) M12™ Heated Hoodie - (Hoodie Only) (1) M12 REDLITHIUM™ 2.0 Compact Battery Pack (1) M12™ Lithium-ion Battery Charger (1) M12™ Battery Holder with 2.1A USB ChargerOverviewPowered by M12™ REDLITHIUM™ Battery Technology, Milwaukee® M12™ Heated Hoodies use carbon fiber heating elements to create and distribute heat to the chest and back. Combining a durable cotton/polyester exterior with a waffle weave thermal lining, the hoodie provides a versatile three-season solution to keep heat in and allow users to shed bulky layers. Features• Washer and dryer safe• Up to (6) hours of run-time with M12™ REDLITHIUM™ Compact

Battery Pack • One-touch LED controller with (3) heat settings • Waffle weave thermal lining traps heat • Durable utility pockets with reinforced edges to protect from

abrasion • Fitted hood provides full range of vision when worn under a hard

hat (2) large exterior pockets, (1) integrated device pocket, (1) low-profile battery pocket

M12™ Heated Hoodie Kits

Size S- 3X


MILW301B21 M12 BLACK HEAT HOOD KIT

MILW301B20 M12 BLACK HEAT HOOD ONLY

MILW301G21 M12 GRAY HEAT HOOD KIT

MILW301G20 M12 GRAY HEAT HOOD ONLY

MILW301R21 M12 RED HEAT HOOD KIT

MILW301R20 M12 RED HEAT HOOD

MILW301R21MILW301R20

MILW301G21MILW301G20

MILW301B21MILW301B20


OverviewThe Milwaukee® WorkSkin™ Cold Weather Base Layer is constructed to handle the demands of hard work in cold conditions. Fast Wicking Sweat Zones underneath the arms and across the upper back move moisture away from the body quickly in high-sweat areas to avoid dampness, cold, and freezing. Durable, long-lasting fabric used in other areas provides more insulation while resisting pilling and fighting odor to extend product life. When worn next-to-skin and under outer layers, WorkSkin™ manages moisture and body temperature to help tradesmen work dry, stay warm, and stay comfortable in the cold. Features• Fast Wicking Sweat Zones move moisture away from under arms

and upper back• Durable body fabric resists pilling and fights odor to extend

product life • Drop tail extended back provides extra protection • Seamless shoulders reduce abrasion from straps and harnesses

Size S- 3X


MILW401G LNG SLV GRAY BASE

WorkSkin™ Cold Weather Base Layer - Gray


Features• Lighting For Task, Area, and Overhead• 4,400 Lumens for Maximum Coverage• High Impact Polycarbonate Lens• AC In and Out: String up to 10 together• Protected AC Plugs• Self-Centering Hang Hook• 180° and 360° Electronic Light Control• Low Battery indicator OverviewMOST VERSATILE LIGHT ON SITE - The M18™ Radius™ LED Compact Site Light is the World’s first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW™ High Definition output, the M18™ Radius™ LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.

M18™ RADIUS™ LED Compact Site Light


MILW214520 M18 RADIUS LED COMPACT SITE LIGHT

Features• Set Light Remotely from 50 ft • Optimize Brightness and Runtime • Program Automatic Schedule • Lighting For Task, Area, and Overhead • 4,400 Lumens for Maximum Coverage • High Impact Polycarbonate Lens • AC In and Out: String up to 10 together • Protected AC Plugs Self-Centering Hang Hook • Reinforced Hang Hole • 180° and 360° Electronic Light Control • Low Battery indicator OverviewMOST VERSATILE LIGHT ON SITE - The M18™ Radius™ LED Compact Site Light is the World’s first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW™ High Definition output, the M18™ Radius™ LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.

M18 RADIUS™ LED Compact Site Light w/ONE-KEY™


MILW214620 M18 RADIUS LED COMPACT SITE LIGHT W/ONE KEY

Product OverviewPowered by M12 REDLITHIUM Battery Technology, the Milwaukee M12 Heated Vest uses carbon fiber heating elements to create and distribute heat to the chest and back. Wind and water resistance combined with a thermal fleece lining provide protection from the elements and allow for three-season versatility. Reinforced with GridIron 900 Denier Ripstop Polyester to Outlast 12 oz. cotton duck work wear by 3X against abrasion and tear, the vest also features riveted, reinforced pockets and a tarnish resistant metal zipper to survive the jobsite. •Washer and dryer safe•Up to (6) hours of run-time with M12 REDLITHIUM compact battery pack•1-touch LED controller with (3) heat settings•GridIron ripstop polyester outlasts 12 oz. cotton duck by 3X, and provides wind/water resistance•Riveted and reinforced pocket edges, and tarnish resistant metal zippers•Thermal fleece lining and drop tail extended back•(2) large outer pockets, (1) inner zip pocket, (1) low-profile battery pocket•Compatible with all M12 REDLITHIUM batteries and all M18 REDLITHIUM batteries (M18 power source sold separately)Size S- 3X

M12 12-Volt Lithium-Ion Cordless Black Ripstop Heated Vest Kit


MILW271B21 M12 BLACK WRK VEST KIT

MILW271B20 M12 BLACK WRK VEST ONLY

MILW271B

Will MILW271B work here?



OverviewThe Milwaukee Cable Cutting Pliers feature a forged head for lasting durability and high cut quality through the toughest applications. The Cable Cutting Pliers are designed with an optimized blade angle that will remain sharp when cutting through copper and aluminum cable. The cable cutting pliers offer rust protection for tough jobsite conditions. The Cable Cutting pliers feature a curved ergonomic handle with comfort grips that will not peel. Features• Beveled Jaw Head• Optimized Blade Angle• Comfort grips will not peel or dig into hands during

extended use• Rust resistant• Forged strength design• Ergonomic Handle Design• 4/0 Aluminum Max Capacity• 2/0 Copper Max Capacity


MILW48226104 CABLE CUTTERS

Cable Cutting Pliers

Features• 3.5” Jaw Capacity • 9” Compact Length • Comfort grips will not peel or dig into hands

during extended use • Rust resistant • Forged strength designOverviewThe Milwaukee PVC/Oil Filter Pliers feature forged jaws for lasting durability through tough jobsite applications. The jaws are designed with a 3.5” capacity for a multitude of common applications including, PVC fittings, small sink basket strainers, oil filters, and more. The PVC/Oil filter plier handles are a compact 9” long but boast the jaw capacity of much larger pliers giving them maximum versatility. Also featured, are comfort grips which will not peel or dig into hands during use.


MILW48226321 OIL FILTER PLIERS

PVC/Oil Filter Pliers

Features• Cordless Detailing• Total Control • Full-Size Car On One Charge• 7” Pad Capacity • Variable Speed Dial and Trigger• Constant Power TechnologyOverviewThe M18 FUEL™ 7” Variable Speed Polisher is the world’s first cordless full-size rotary polisher. By harnessing the power, performance and run-time of M18 FUEL™ technology, this tool delivers corded performance that allows users to power through the most demanding applications. At more than 1 lb. lighter than corded, and the ability to deliver total control through a variable speed dial and trigger, the new M18 FUEL™ Polisher frees users from the extra work, distractions, paint damage, and inconvenience caused by cords. Paired with M18 XC5.0 batteries, the M18 FUEL™ Polisher can complete a full size car on one charge when working on moderate to good paint.The M18 FUEL™ Polisher is equipped with a rubber over mold front housing to protect the paint from scratches in use as well as a removable dust cover to protect the motor and electronics from wool fibers and residue. The new tool is designed to distribute more of its weight over the pad, providing natural pressure on the surface area and more.(1) M18 FUEL™ 7” Variable Speed Polisher (Tool Only)(2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (1) Backing Pad, (1) Side Handle

M18 FUEL™ 7” Variable Speed Polisher Kit


MILW273820 M18 FUEL 7” VARI SPEED POLISHER BARE

MILW273822 M18 FUEL 7” VARI SPEED POLISHER KIT

MILW273822P M18 FUEL 7” VARI SPEED POLISHER KIT W/PADS*

*(Kit Includes: (1) 7” Wool Cutting Pad)

MILW273822P

MILW273820

MILW273822

Milwaukee knit cap will make a perfect addition to your Milwaukee Gear.Features• 100% turbo spun acrylic knit Hypoallergenic• Tight knit allows for easy embroidery Hand

washable• 8-1/2 in. lengthSpecifications:• Color: Red• Decoration: Embroidery


MILW501R RED KNIT HAT

Red Cuffed/ Extended Knit Hat - One SizeOverviewThe Milwaukee Cuffed Knitted Hat is made out of 100% Acylic material, designed for extreme warmth and durability. The hat can be worn cuffed or extended for maximum versatility. The hat’s design allows it to be worn comfortably underneath a hard hat. It is intended for cold weather use. • 100% acrylic• Can be worn cuffed or extended for maximum

versatility• Fits under hard hat• Cold weather accessory• Heavy duty material


MILW501G GRAY CUFFED KNIT HAT

Men’s Gray Cuffed Knit Hat


“Serving Your induStrY Since 1948”

OverviewThe Milwaukee Fencing Pliers feature a forged head for lasting durability through the toughest applications. The Fencing Pliers are designed with a multi-purpose design which incorporates a staple puller, staple pincher, fencing wire cutter, fencing wire puller, fencing wire crimper, and general purpose hammer. The fencing plier offer rust protection for tough jobsite conditions. The fencing pliers are designed with a curved handle with comfort grips that will not peel. Features• Multi-Purpose Tool • High-Leverage Design • Comfort grips will not peel or dig into hands

during extended use • Rust resistant • Forged strength design


MILW48226410 FENCING PLIERS

Fencing Pliers

OverviewThe Milwaukee 7” Nipping Pliers feature hardened jaws with an optimized blade angle for cutting and pulling nails, screws, fence wire, and other materials. The 7” Nipping Plier feature an iron carbide edge for maximum cutting life. The pliers’ smooth jaw design will not marr finish surfaces during pull or pry applications. The 7” Nipping Pliers offer a durable forged design that are resistant from rust, and comfort grips that will not peel. Features• Iron Carbide Edge • Smooth Jaw • Comfort grips will not peel or dig into hands during

extended use • Rust resistant • Forged strength design


MILW48226407 7” NIPPER

7” Nipping Pliers


OverviewMilwaukee® SHOCKWAVE Impact Duty™ Magnetic Bit Tip Holders are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE Impact Duty™ magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement. The 2-piece construction of the holders is the optimal assembly for abusive applications. Features• Use with Milwaukee® SHOCKWAVE Impact Duty™

Insert Magnetic Nut Drivers• 2-piece construction withstands abuse in impact

applications• Proprietary steel and heat treat process for

maximum strength and durability

SHOCKWAVE™ Magnetic Bit Tip Holder


MILW48324511 SHOCKWAVE BIT TIP HOLDER MAG 6”

MILW48324512 SHOCKWAVE BIT TIP HOLDER MAG 12”

MILW48324512

MILW48324511

SHOP ONLINE TODAY!Online Shopping

Made Easy!www.boltsupply.com

more than just nuts and bolts! “professionals serving professionals” new products ·...

Documents