modern building codes: keeping pace with the wood revolution
TRANSCRIPT
Modern Building Codes: Keeping Pace with the Wood Revolution
Wood construction and the 2012 International Building Code
Earn 1 AIA/CES HSW continuing education learning unit (LU) CEU Publish Date: May 2015
Image: Togawa Smith Martin, Inc.
2
Best Practices
reThink Wood sponsors this Continuing Education Unit provided by McGraw-Hill Publishers. This course is registered with AIA CES for continuing professional education.
As such, it does not contain content that may be deeded or construed to be an approval or endorsement by the AIA of any materials of constructions or any manner of handling, using, distributing, or dealing in any material or product.
Credit earned on completion of this course will be reported to AIA CES for AIA members. Certificates of completion are available for self-reporting and record-keeping needs.
Questions related to the information presented should be directed to reThink Wood upon completing this program. Please contact [email protected].
AIA Provider Number: K029 AIA/CES Course number: K1505JAIA Credit: 1 AIA/CES HSW learning unit (LU)
3
Copyright Materials
This presentation is protected by U.S. and international copyright laws. Reproduction, distribution, display and use of the presentation without written permission of reThink Wood is prohibited.
© 2015, reThink Wood, reThinkWood.com
4
Learning Objectives
1. Discuss provisions in the International Building Code (IBC) intended to ensure that wood buildings provide the same level of fire performance as other building types.
2. Evaluate techniques that allow designers to safely increase the allowable heights and areas of building projects beyond the base limits stated in the IBC.
3. Identify the advantages of wood-frame structures in seismic and high-wind events.
4. Explain how advances in wood products and building systems are influencing the evolution of building codes.
5
Table of Contents
Section 1
Wood Construction and the 2012 IBC
Section 2
Fire Protection
Section 3
Seismic Performance
Section 4
Wind Resistance
Section 5
Sound Transmission and Acoustics
Section 6
The Evolution of Wood Construction
6
Table of Contents (continued)
Section 7Green Building Codes, Standards & Rating Systems
Section 8
Wood: The Sensible Revolution
Section 9
Endnotes
7
WOOD CONSTRUCTION AND THE 2012 IBCSECTION 1
8Photo: Mark Herboth Photography
• Uniform code adopted by most jurisdictions
• Recognizes fire protection techniques for wood construction
• Consolidates max allowable areas and heights
• Allows use of wood in a wide range of building types
IBC Offers Opportunities for Wood
The pioneering nature of building design encourages architects and engineers to push beyond the conventional.
Photo: Mark Herboth Photography
9
KEY PROJECTDesigning with Alternate Materials
Promega “The Crossroads”Madison, WisconsinArchitect: Uihlein/Wilson Architects, Inc. / EwingColeCompleted: 2013
Photo : EwingCole
IBC Section 104.11 states: “An alternative material, design or method of construction shall be approved where the building official finds that the proposed design is satisfactory and complies with the intent of the provisions of the code.”
10
American National Standards for Wood Design
• 2015 National Design Specification® (NDS®) for Wood Construction
• 2015 Special Design Provisions for Wind and Seismic (SDPWS)
• 2015 Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings
• 2015 Permanent Wood Foundation (PWF) Design Specification
11
2015 National Design Specification® (NDS®) for Wood Construction
• New chapter for cross laminated timber (CLT) that covers:• Member design• Connections• Fire design
• Structural composite lumber (SCL)• Now permitted for fire requirements
• Updated design properties for visually-graded southern pine dimension lumber
Click image to view
12
2015 Special Design Provisions for Wind and Seismic (SDPWS)
• New provisions for seismic and wind design of cantilevered wood-frame diaphragms
• Revisions to protocol for determining equivalent deformation-based shear distributions:• Allows more efficient seismic
design of shear walls
Click image to view
13
• New tabulated spans for lumber framing members
• Tables provide prescriptive wood-frame solutions for rafters and ceiling joists• Meet new deflection limits for
ceilings using gypsum wallboard or brittle finishes
2015 Wood Frame Construction Manual (WFCM) for One- and
Two-Family Dwellings)
Click image to view
14
2015 Permanent Wood Foundation (PWF) Design Specification
• Load-bearing wood-frame wall system
• Used for above- and below-grade use
• Foundation for light-frame construction
Click image to view
15
FIRE PROTECTIONSECTION 2
16
Wood’s Code-Compliant Fire-Resistive Performance
IBC specifies a basic allowable area based on:• Single story• Construction type • Occupancy
IBC then increases the allowable area based on features of the building, such as:
• Addition of an automatic sprinkler system• Side yard open space• Fire walls• Augmented exiting • Additional stories• Use of FRT wood in exterior walls
Wood-frame construction has an excellent history of code-compliant fire-resistive performance.
17
Techniques to Increase Allowable Building Size
• Use fire walls to create separate buildings; each is measured separately and subject to its own height and area limits for area
• Add automatic sprinkler system
• Use IBC’s open frontage provision, which allows an increase in building area if the building fronts on a public way or open space
• Increase to a higher construction type
18
Minimizing Fire Risk and Impacts
StellaMarina del Rey, CaliforniaArchitect: DesignARCCompleted: 2013
Photo: Lawrence Anderson, www.lawrenceanderson.net
Regardless of material, building components such as walls, floors and roofs are designed and rigorously tested to ensure they provide the necessary structural performance to allow occupants in a building to escape should fire occur, and for emergency responders to perform their duties.
19Photo: Davis & Church LLC
Passive:• Limit height and area of the
building• Prescribe use of fire-rated
building elements• Provide egress
Active:• Automatic fire detection system• Automatic sprinkler system• Alarm or other detection system
Codes are relying increasingly on active systems, since—with proper maintenance and alarm supervision—they have a high degree of reliability.
Passive and Active Building Fire Safety Measures
20Photo: Davis & Church LLC
Fire-resistive assemblies:• Vertical (wall)• Horizontal (floors, roofs)• Structural frame members
(columns, beams)
Most assemblies are required to have a 1- or 2-hour fire-resistive rating, as measured by ASTM Test Method E-119.
Fire resistance of wood assemblies may be calculated using the provisions of Section 722.6 of the IBC.
Rated Assemblies
21
Construction Types
• Influence Allowable Heights and Areas• Example: Type III allows greater heights and areas than
Type V
• Permit FRT wood in different locations• Type III and IV: FRT allowed in exterior walls, interior
walls and partitions
• Type I and II: FRT allowed in non-bearing partitions, non-bearing exterior walls and portions of roof
• Type I: allows heavy timber roofs without FRT
22
KEY PROJECTDesigning for Fire Protection
Cityville CityplaceDallas, TexasArchitect: JHP Architecture/Urban DesignCompleted: 2013
Photo: JHP Architecture
23Photo: Davis & Church LLC
Member types:• Sawn stress-grade lumber• Tongue and groove decking• CLT• Glulam
Achieves fire resistance through:• Use of wood members with specified minimum thickness and
composition (char)• Meeting fire resistance requirements in exterior and interior
walls• Avoids concealed spaces• Uses approved fasteners, details and adhesives
Type IV Construction utilizes heavy timber elements as the structural members.
Heavy Timber Construction
24Photo: Davis & Church LLC
• Building is vulnerable until fire doors, smoke alarms and sprinklers are in place
• IBC Chapter 33 outlines safety precautions:• Fire extinguishers• Standpipes• Egress
IBC Chapter 33 details provisions for fire extinguishers, standpipes and means of egress during construction.
Fire Safety During Construction
25
SEISMIC PERFORMANCESECTION 3
26
Wood Meets DemandingEarthquake Design Requirements
• Wood is a lighter weight building material; wood buildings resist less earthquake-induced force
• Numerous nail connections provide more load paths, less chance of collapse and better ductility
• Properly-constructed building elements (frames, shear walls, diaphragms, etc.) reduce weak links between structural members
27
KEY PROJECTDesigning for Seismic Performance
South ParkLos Angeles, CaliforniaArchitect: Togawa Smith Martin, Inc.Completed: 2016 (planned)
Rendering: Togawa Smith Martin, Inc..
28
WIND RESISTANCESECTION 4
29
System Integrity Key to Wind Resistance
When structural wood panels are properly attached and used to form diaphragms and shear walls, they also form some of the most solid and stable roof, floor and wall systems available.
Photo: Arch Wood Protection
All components—including framing, structural panel sheathing and inter-element fastening details—must be designed and installed correctly for diaphragms and shear walls to be effective.
30
Building System Failures Under Wind Forces
Most local building codes require a minimum of 33 fasteners for a standard 4×8 panel installed over roof supports at 24 inches on center.
• Loss of roofing materials and sheathing
• Improper connection detailing between structural systems
• Inadequate sheathing fastening
• Interrupted load path causes change in loading dynamics; diaphragm ceases to function
31
SOUND TRANSMISSION AND ACOUSTICSSECTION 5
32Photo: Davis & Church LLC
IBC provides minimum requirementsfor sound protection between floors:
• Sound Transmission Class (STC) rating• Impact Insulation Class (IIC) rating
Wood provides natural acoustic performance.
Can further reduce sound transmission using:• Gypsum board attached using resilient metal channels• Glass-fiber or rock-fiber insulation
Wood-frame construction is particularly efficient in residential buildings where sound insulation is required.
Acoustical Considerations
33
KEY PROJECTAcoustic Performance
University House Arena DistrictEugene, OregonArchitect: Mahlum ArchitectsCompleted: 2013
Photo: Lincoln Barbour
34
Wood Absorbs and Disperses Sound
Arena Stage at the Mead Center for American Theater
Poplar wood slat wall system with basket weave design absorbed and dispersed sound in “The Cradle,” a small oval-shaped theater.
Photo: Nic Lehoux, courtesy of Bing Thom Architects
35
THE EVOLUTION OF WOOD CONSTRUCTIONSECTION 6
36Photo by Matt Todd, courtesy of WoodWorks
• Typically Type III or V Construction• V = allows use of untreated wood throughout• III = requires exterior walls to be non-combustible
construction/FRT wood
• Four stories common, economical
• IBC permits five stories (six for office occupancy)
• Podium structures common
Mid-rise/Multi-family
37
KEY PROJECTBeyond Five Stories with the IBC
1201 Mercer / RivetSeattle, WashingtonArchitect: Ankrom Moisan ArchitectsCompleted: 2014
Photo: Casey Braunger, CBPhoto
38
Schools
Benefits of wood construction
• Cost effective• Speed of construction• Design versatility• Meets green building goals• Reduces stress, creates
positive learning environment
The IBC has well-established parameters for wood-frame schools, which is good news for school districts trying to meet a limited budget.
Photo by Bethel School District
39
Originally designed in steel and masonry, El Dorado High School was changed to wood-frame construction—saving $2.7 million.
Motivating Environment
El Dorado High School
• Exposed wood and natural light enhances learning and motivates students
• Warm spaces
• One of the first schools in Arkansas to make extensive use of wood
• Successful implementation prompted change in school board policy to allow use of wood in school construction
Photo: Dennis Ivy, courtesy WoodWorks
40
Mass Timber
Cross laminated timber / CLT
• 3, 5 or 7 layers of solid dimension lumber glued to create full-depth solid wood panels
• Cross lamination provides exceptional strength, stability and rigidity• Low-carbon alternative to concrete and steel• Fast installation• Reduced on-site waste• Light weight/reduced foundation requirements• Thermal performance• Design versatility• Chars slowly, providing fire-resistive protection Photo courtesy of naturallywood.com
41
CLT Code Approvals
2015 IBC allows CLT use with Type IV Construction; ANSI/APA PRG 320-2011 Standard for Performance-Rated Cross-Laminated Timber provides quality assurance. Download a free copy of the CLT Handbook here.
Photo courtesy of Lend Lease
IBC recognizes CLT products manufactured to the ANSI/APA PRG 320-2011 Standard as code-compliant.
42
GREEN BUILDING CODES, STANDARDS AND RATING SYSTEMS
SECTION 7
43
Environmental Evolution• U.S. Green Building Council
• California Green Building Standards Code (CALGreen)
• ASHRAE 189.1, a code-intended commercial green building standard published by ASHRAE in cooperation with the Illuminating Engineering Society of North America (IES)
• International Green Construction Code (IgCC)
IgCC’s key mandatory requirement is that at least 55 percent of materials (based on mass, volume or cost) be used, recycled, bio-based and/or indigenous in any combination.
44
Life Cycle Assessment (LCA)Encourages design professionals to:
• Compare different building designs based on their true environmental impacts over their entire life cycle, from extraction or harvest through manufacturing, transportation, installation, use, maintenance and disposal or recycling
• Make informed choices about the materials they use
Source: Building Green With Wood www.naturallywood.com LCA studies consistently show that wood is
better for the environment than steel or concrete in terms of embodied energy, air and water pollution, and greenhouse gas emissions.
45
WOOD: THE SENSIBLE REVOLUTIONSECTION 8
46
Building Codes Recognize Wood’s Safety
IBC allows wood use in a wide range of building applications.
Wood provides:• Cost effectiveness• Functionality• Design flexibility• Beauty• Environmental performance
47
ENDNOTESSECTION 9
48Photo by David Lena; courtesy of HMC Architects
Ready to take the online CEU Test?
Click below to earn your AIA/CES HSW Learning Unit:
http://continuingeducation.construction.com/reThinkWood.php
49
For more information on building with wood, visit reThinkWood.com/CEU
THANK YOU!