mode: pm-rnr 360 rotation 3.6 bolt circle p fleam pat
TRANSCRIPT
Date: Tolerence: DrawnBy:OptionNo:
Name:
Material Specs:
PartNo:360501
PM-RNR DIMENSIONS
9/21/2015 crieman.00...........±.010.000.........±.005.0000......±.0005
DECIMAL:
1/2
36
60
56
18
3
2424.5
3.96 Bolt Circle
.4064 Places
Equally Spaced
5.06
Base Mount Pattern
8 PLACES EQUALLY
SPACE ON A 14.00BOLT CIRCLE
1) Secure the Pedastool to the floor with (8) 1/2"diameter wedge anchor bolts drilleda minimum of 3-3/4" into the concrete
2) Secure the base of the part manipulatorto the pedastool with (4) 3/8" bolts
-The pneumatic cylinder will require a minimum of 90 psi to performthe lifting operation.
-The lifting height is dependent on the load & air pressure (see chart).
-The part manipulator is capable of using air at 135 psi maximum ifavailable.
Load (lbs) Pressure (psi)85 12075 10065 90
FLEXARM PART MANIPULATORMODEL: PM-RNR
MAX LIFTING CAPACITY 85LBS.
360° ROTATION
Date: Tolerence: DrawnBy:OptionNo:
Name:
Material Specs:
PartNo:G30-0032
Steel, Alloy
PM-RNR Base Mount
7/24/2015 crieman.00...........±.010.000.........±.005.0000......±.0005
DECIMAL:
100.46 mm
11.00 mm
The FlexArm Part Manipulator is an ergonomic material handling solution that increases both productivity and employee safety. It operates in tight spaces to position parts, unload tools, or hold work pieces. It has the capacity to lift up to 200 lbs, yet is compact to work where a traditional overhead system won’t. It has 360-degree motion, multiple mounting options, and a variety of reach possibilities. The FlexArm Part Manipulator is built for versatility.
“The Part Manipulator is working out fantastic. The operators really like the ease of use and the time savings compared to the old method of transferring parts, which was a magnet on a jib crane.“
- Daniel Haire,Detroit Edge and Tool Co.
Use the Hook or Magnet end to maneuver parts
up to 200 lbs
Mount on an adjustable pedestal or
table
Compact design works where an overhead
system won’t
www.flexarminc.com
Distributed by Ergonomic Partners [email protected] www.ErgonomicPartners.comTel: (314) 884-8884
Part Manipulator
Date: Tolerence: DrawnBy:OptionNo:
Name:
Material Specs:
PartNo:360501
PM-RNR DIMENSIONS
9/21/2015 crieman.00...........±.010.000.........±.005.0000......±.0005
DECIMAL:
1/2
36
60
56
18
3
2424.5
3.96 Bolt Circle
.4064 Places
Equally Spaced
5.06
Base Mount Pattern
8 PLACES EQUALLY
SPACE ON A 14.00BOLT CIRCLE
1) Secure the Pedastool to the floor with (8) 1/2"diameter wedge anchor bolts drilleda minimum of 3-3/4" into the concrete
2) Secure the base of the part manipulatorto the pedastool with (4) 3/8" bolts
-The pneumatic cylinder will require a minimum of 90 psi to performthe lifting operation.
-The lifting height is dependent on the load & air pressure (see chart).
-The part manipulator is capable of using air at 135 psi maximum ifavailable.
Load (lbs) Pressure (psi)85 12075 10065 90
FLEXARM PART MANIPULATORMODEL: PM-RNR
MAX LIFTING CAPACITY 85LBS.
360° ROTATION
Date: Tolerence: DrawnBy:OptionNo:
Name:
Material Specs:
PartNo:G30-0032
Steel, Alloy
PM-RNR Base Mount
7/24/2015 crieman.00...........±.010.000.........±.005.0000......±.0005
DECIMAL:
100.46 mm
11.00 mm
Model Weight Range*
Linear Range Vertical Stroke
Arm Length
Angle Mount**
PM-RNR 0-85 18”-56” 24.5” 2 ‘ 1.5’ A
PM22-S0-200
16”-64” 23”
2’
2’ S
PM22-A 16”-64” 23” 2’ A
PM23-S
0-150
4”-76” 23” 3’ S
PM23-A 4”-76” 23” 3’ A
PM24-S 8”-88” 23” 4’ S
PM32-S
0-150
28”-76” 38”
3’
2’ S
PM32-A 28”-76” 38” 2’ A
PM33-S2 16”-89” 38” 3’ S
PM33-A2 16”-89” 38” 3’ A
PM34-S2 4”-101” 38” 4’ S
PM42-S
0-90
40”-88” 52”
4’
2’ S
PM42-A 40”-88” 52” 2’ A
PM43-S1 28”-101” 52” 3’ S
PM43-A1 28”-101” 52” 3’ A
PM44-S1 16”-113” 52” 4’ S
360600 Lifting Magnet
FX900032 30”-50” Adjustable Pedestal Mount
Part Manipulator Models and Prices
PM33-Straight PM33-Angled
*Weight Range is listed for 120 PSI
Distributed by Ergonomic Partners | [email protected] | (314) 884-8884 | www.ErgonomicPartners.com