mitel line interface module
TRANSCRIPT
DATA SHEET
MITEL LINE INTERFACE MODULEINTERFACE MODULEINTERFACE MODULE
PROVIDES TELEWORKERS WITH LOCAL EMERGENCY ACCESSThe Mitel® Line Interface Module ensures mission-critical enterprises always have voice communications. It also enables remote workers to have localized calling and emergency services as well as failover capability in the event of a network failure.
MITEL TELEWORKER SOLUTION ENHANCEMENTLine Interface Module is a discreet component that plugs into the back of your Mitel 5324, 5330, 5330e, 5340, 5340e, or 5360 IP Phones for local access, emergency dialing and guaranteed survivability. With it, voice communication automatically and transparently defaults to a public switched telephone network (PSTN) analog line if IP service is disrupted, allowing users to continue to make and receive calls. It works as a convenient solution that enables remote workers and teleworkers to have local calling capability and access to local emergency services. If something should happen to the network, DSL services or even the local router, teleworkers still have uninterrupted access to voice communications. Line Interface Module is, in essence, a low-cost disaster recovery solution for converged, mission-critical environments of any kind.
KEY FEATURES· User selection of either local area network (LAN) or PSTN
from a single desktop device· Emergency call ability to local emergency services when
used in remote / teleworker locations· Privacy mode option in shared analog line scenarios· Phone automatically connects to PSTN upon a LAN failure· Allows IP phones to connect to an analog trunk to allow users
to make and receive calls· User selectable: will allow a user to select a PSTN line to make
and receive phone calls on an analog line without disconnecting from the IP connection
· In failover mode the IP phone will automatically switch to analog mode
· Installs into the module compartment of a 5324, 5330, 5330e, 5340, 5340e, or 5360 IP Phone
· Analog mode supports basic phone operation, handset and dial pad functionality
KEY BENEFITS· Reduced long distance charges for remote teleworkers· Survivability at the edge of the network· Extends Mitel’s resiliency strategy from the core of the network
to the user desktop· Ensures business continuity in the event of a network disruption· Flexibility of Mitel IP phones enables modules to be easily installed
and confi gured· Teleworker support enables teleworkers to have one device for
both corporate and local access
POWER CONFIGURATIONLine Interface Module supports Power over Ethernet (IEEE 802.3af) or 48 V DC Ethernet power adapter (purchased separately) for the 5324, 5330, 5330e, 5340, 5340e, and 5360 IP Phones, which is recommended for teleworker or remote use.
POWER CONSUMPTION0.4 W (in addition to the power consumed by the phone that the Line Interface Module is attached to).
MINIMUM SYSTEM SOFTWARE REQUIREMENTS· Mitel Communications Directors (MCD) Release 5.0· Mitel 5000 Communications Platform (CP) Release 5.0 · Mitel SX-200 IP Communications Platform (ICP) Release 4.0 (UR5)· Mitel Border Gateway Release 7.1
SUPPORTED IP PHONES· 5324 IP Phone· 5330 IP Phone· 5330e IP Phone· 5340 IP Phone· 5340e IP Phone· 5360 IP Phone
mitel.comTHIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains.
M MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective holders.
© Copyright 2012, Mitel Networks Corporation. All Rights Reserved. GD 372_10363 PN 51008540RI-EN
FOR MORE INFORMATION ON OUR WORLDWIDE OFFICE LOCATIONS, VISIT OUR WEBSITE AT MITEL.COM/OFFICES
GLOBAL HEADQUARTERS
Tel: +1(613) 592-2122Fax: +1(613) 592-4784
ASIA PACIFIC
Tel: +61(0) 2 9023 9500Fax: +61(0) 2 9023 9501
U.S.
Tel: +1(480) 961-9000Fax: +1(480) 961-1370
EMEA
Tel: +44(0)1291-430000Fax: +44(0)1291-430400
CALA
Tel: +1(613) 592-2122Fax: +1(613) 592-7825
DATA SHEET | MITEL LINE INTERFACE MODULE
ENVIRONMENTAL CONDITIONS
Temperature Humidity
Operational +4˚C to +49˚C 34% at +49˚C95% at 29˚C
STORAGE
Temperature Humidity
Operational -40˚C to +66˚C 15% at +66˚C95% at 29˚C
LINE INTERFACE MODULE CONFIGURATION
MITEL | SIMPLY COMMUNICATING®
PSTN
Firewall
Analog Tip/Ring
Ethernet LAN
Remote Site
Teleworker Gateway
IP CommunicationsPlatform
Bridge all Analog Lines
with Line Interface Modules
Ethernet
PSTN Trunk Analog Fax
5235 IP Phone
5330IP Phone
5340 IP Phone
5360 IP Phone
5324 IP Phone
5 3 6 0 I P P h o n e
Corporate Network
Internet