meritor permalube rpl series drivelines · meritor offers permanently lubricated driveline...
TRANSCRIPT
Meritor offers permanently lubricated driveline solutions to fi t virtually any application, with a wide range of rated torque capacities and premium features.
Permalube™ RPL35
Permalube™ RPL25
Our driveline solutions offer the following benefi ts:■ Permanently lubricated and sealed for life■ High torque-rated models available■ Extended U-joint life■ 5-year/500,000-mile linehaul warranty
Permalube™ RPL35
Permanently Lubricated and Ready for Work
MERITOR®
PERMALUBE™ RPL SERIES DRIVELINES
Permalube™ RPL25
Meritor Heavy Vehicle Systems, LLC2135 West Maple RoadTroy, Michigan 48084 USA
Call 1-866-668-7221or visit meritor.com.
©2015 Meritor, Inc.Litho in USARevised 5-15SP-0662
First in Permanently Lubricated TechnologyMeritor Permalube™ RPL Series drivelines were the fi rst in the North American heavy-duty commercial
vehicle industry to be permanently lubricated and sealed for life. The advantage? Reduced operating and
maintenance costs, industry-leading warranties, easy serviceability and extended U-joint life, particularly
on gear-fast/run-slow drivetrains and higher torque applications.
■ 5-year/500,000-mile linehaul warranty
■ High-torque-rated models available for demanding applications, including heavy service and downspeeding
■ Four-bolt design for easy installation and service
■ E-coated steel guard secures and protects the slip seal
against contaminants and damage
■ Extended U-joint life: – Triple lip seals provide the ultimate protection
against contaminants – Nylon thrust washers eliminate
metal-to-metal contact, preventing wear
■ Self-aligning center bearing is standard
■ Environmentally "green" because the need to grease the driveline is eliminated
■ Partner with a leader – Meritor has been the industry's
technology leader in drivetrain solutions for over 20 years
Features and Benefi ts
High-Torque RatedSpecifi cations RPL20 RPL25 RPL25SD RPL35 RPL35SD
Tube Size (inches) 4.095 x 0.18 4.59 x 0.18 4.69 x 0.23 4.69 x 0.23 5.204 x 0.236
Tubing I.D. (inches) 3.735 4.23 4.23 4.23 4.732
Swing Diameter (inches) 7.80 9.10 9.10 8.11 8.11
Driveline Rating (lb.-ft.) 12,000 17,200 18,500 21,500 25,820
Driveline Rating (n-m) 16,270 23,320 25,083 29,150 35,000
Application Main & Inter-axle Main & Inter-axle Main Main Main
The RPL35 Series drivelines were designed for demanding applications, such as heavy service and downspeeding. These applications often place higher torque demands on the drivetrain system. The RPL35 Series drivelines accommodate the increased engine torques and distribute it more evenly throughout the system.
For more information on downspeeding, refer to Meritor Downspeeding Solutions spec sheet (SP-1589).
Secure fl ange connections throughout the RPL35 Series drivelines accommodate high torques.
Meritor Driveline Warranty CoverageThe Meritor driveline warranty for linehaul applications is 5 Years/500,000 miles parts, 1 year unlimited miles labor included. Every claim is fully supported by OnTrac. Call 1-866-668-7221(OnTrac1). For details, download the Commercial Vehicle Systems Warranty brochure (SP-95155)
from meritor.com/lod.
Backed by DriveForce™
All RPL Series drivelines are backed by the industry’s largest and best-equipped fi eld support team. DriveForce supports Meritor and Meritor WABCO products cradle to grave. It serves the North American market with a combination of sales, service and aftermarket representatives. For more information or to fi nd your DriveForce representative, visit meritor.com/driveforce.
Premium Support
Assumes 900,000-mile truck lifecycle and 18 greasing intervals with savings of $33 per interval. *
Zero Miles 1,046,000 Miles 1,566,000 Miles
Real-life examples of high-mileage U-joints show virtually no wear.