7/28/2019 Mensaje Mode

1/2

NCR Native Message Mode

Message mode is a software feature that is available for customizing the SST operation locally. The feature is availablein the CONFIGURE menu within the supervisor mode. It is a possible 17-digit number when printed using the menuoption 1, PRNT CONFIG. The data is identified by the line MESSAGE MODE =. The number of digits can vary from aminimum of 1 to a maximum of 17. Most software has 8 digits available to program (see Table 6-4, Menu 1 for an

example). The first digit is digit a , with the remaining digits following the alphabet (for example, Message Mode =abcdefghijklmnopq). Table 7-2 describes each digit and its definition.

Table 7-2 NCR Native Message Mode

Digit Code Definition

Specifies the type of message mode. It must be a 1 for NCR native mode.a

1 (default) NCR Native Mode

Controls the reporting of supervisor menu selections to the hostcomputer.

0 (default) Only items chosen from the Select menu are reported

b

1 1 menu number and menu item from all menus are reported

Controls three different sets of options:Whether or not to retract cash

Whether or not to beep while the cash is presentedWhether or not to beep while the depositor is waiting for an envelope tobe deposited.

Retract Cash Cash Present Beeper ON DepositBeeper ON

0 (default) Yes Yes Yes

1 No Yes Yes

2 Yes No Yes

4 Yes Yes No

5 No Yes No

c

6 Yes No No

Controls three different sets of options:Whether to check night safe for a full condition after the deposit iscompleted or before the deposit beginsWhether or not a NAK from a security camera is sent to the hostcomputerWhether or not the cancel key is enabled after a statement has beenrequested.

Check Full Status After Deposit Send Camera NAK CancelStatement

0 (default) Yes Yes Yes

1 No Yes Yes

2 Yes No Yes

3 No No Yes

4 Yes Yes No

5 No Yes No

6 Yes No No

d

7 No No No

Controls two different sets of options:Whether a dispenser status is sent after the notes are presented or aftera retract/auto purge cycle has completed.Whether to beep while the card is presented or not.

Send status after present Beep on cardreturn

0 (default) Yes Yes

1 No Yes

2 Yes No

e

3 No No

7/28/2019 Mensaje Mode

2/2

Controls three separate options:Whether or not a download is always saved on disk or only when thedownload contains a config IDWhether or not a consumer's account number is recorded on the journalwhen the card is capturedWhether or not messages are recorded on the journal when the SST highorder communication goes on and off line.

Always Save Download Print Account Number Print On/Off-Line

0 (default) Yes No No

1 No No No

2 Yes Yes No

3 No Yes No

4 Yes No Yes

5 No No Yes

6 Yes Yes Yes

f

7 No Yes Yes

Controls two separate options:Whether the maximum number of print lines before a cut is 24 or 49Whether or not the NDC+release number and NDC+ software ID fieldsare added to the configuration terminal state message.

Receipt Maximum - 24 Lines Send Releasenumber

0 (default) Yes No

1 Yes No

2 No No

3 No No

4 Yes Yes

5 Yes Yes

6 No Yes

g

7 No Yes

Controls three separate options:Whether the FDK keys on the right of the CRT are used or the FDK keyson the leftWhether the clear key is on the top right of the keyboard or switchedpositions with the cancel key.

Right FDKs Enabled StandardKeyboardLayout

0 (default) Yes Yes

1 No Yes

2 Yes No

h

3 No No

i Reserved - not used

j Reserved - not usedk Reserved - not used

l Reserved - not used

m Reserved - not used

n Reserved - not used

o Reserved - not used

p Reserved - not used

q Reserved - not used