medical components for wound care, ostomy and … · for over 35 years manufacturers around the...

MEDICAL COMPONENTS FOR WOUND CARE, OSTOMY AND

MEDICAL DEVICES

PRODUCT GUIDE

For over 35 years manufacturers around the world have trusted Transcontinental Advanced Coatings to deliver high-performance medical components for wound dressings and the advanced wound care market.

The inspire® range includes breathable polyurethane films, polyurethane foams, hydrophilic foams, laminates and adhesives, ultra-thin films, novel highly breathable adhesive systems and new developments in infection control.

Our medical components are produced in ISO 9001-2015 facilities to exacting standards in a clean room environment and are tested to ensure compliance with the appropriate regulatory standards.

POLYURETHANE FILM, FOAM AND ADHESIVE

TECHNOLOGY FOR WOUND CARE DRESSINGS

FEATURES Breathable

Bacterial Barrier

Skin Friendly Adhesive

Pattern Coating

Printed

Waterproof

Conformable

Branded

Colored

Conductive

BENEFITS Low Risk of Maceration /

Rapid Wound Healing

Less Chance of Infection

Differentiation by Dressing Type

Corporate Branding

Differentiation and Correct Positioning of Dressing

Withstands Patient Washing / Showering

Dressing Stays in Place Longer

Highly Breathable; A Variety of Adhesive Types Available

Low Risk of Skin Reactions

Suitable for Electrodes

POLYURETHANE FILMS

PRODUCT DESCRIPTIONUNITS OF

MEASURE15µm PU Film on Paper Liner

15µm PU Film on Filmic Liner

20µm PU Film on Polyester

30µm PU Film on Paper Liner



25µm PU Film on a Paper Liner for hydrocolloid

applications

60µm PU Film on a Paper Liner

PU FILM/FOAM THICKNESS µm 15 15 20 30 30 30 25 60

COLOR / PRODUCT CODE OTHER COLORS ARE AVAILABLE

ON REQUEST

Clear 2151 2155 1201 2301 1301 2304 2250 2601

Pink 2150 1206 2350 2352 2650

Beige 2152 2340

White 2370

CASTING LINER RELEASE FORCEN/25mm/ PU

Release0.12 0.12 0.12 0.12 0.12 0.12 0.1 0.15

PU CASTING LINER TYPE Paper Polyester Polyester Paper Film Film Paper Paper

FINISH Matt Clear Clear Clear Clear Clear Clear Clear Clear

BACTERIAL BARRIER Yes Yes Yes Yes Yes Yes Yes Yes

MVTR UPRIGHT g/m2/24hrs 3500 3500 3000 2600 2300 2600 1400 17990

MVTR INVERTED g/m2/24hrs 15500 15500 9000 14500 9000 14500

TENSILE STRENGTH N/25mm 12.5 12.5 20 27.5 35 27.5 22 77

ELONGATION % 440 440 475 475 500 475 500 825

SUITABLE FOR GAMMA STERILIZATION

Yes Yes Yes Yes Yes Yes Yes Yes

COEFFICIENT OF FRICTION AGAINST COTTON SURFACE

0.85 0.85 0.85 0.85 0.85 0.78 0.85 0.85

COEFFICIENT OF FRICTION AGAINST TEFLON SURFACE

0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

PRINTABLE PU CASTING LINER Yes Yes Yes Yes Yes Yes Yes Yes

PRODUCT DESCRIPTION

Breathable film, typically for use in medical products as a backing film for hydrophilic foams, hydrocolloid dressings and adhesive coated secondary wound dressings for the consumer and professional markets.

Available in Clear, Pink, Beige and White and can be printed in-house with FDA approved inks.

CHARACTERISTICS

• Exceptional breathability

• Superior soft feel and high conformability

• Waterproof, bacterial barrier

• Low coefficient of friction

• Good transparency and exceptional matt surface

• Tested in accordance with ISO 10993 (Biological evauation of medical devices)

• Available with either film or paper casting liners

• Available in Master Rolls or slit to the customer’s specification

Recommended storage conditions of 23°C ±5°C, 50% ±10% Relative Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed above are for guidance purposes only and do not constitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contiained herein is intended as a recommendation to use our products to infringe any patent.


POLYURETHANE FILMS

ADHESIVE COATED FILMS PATTERN COATED ADHESIVE COATED FILMS

PRODUCT DESCRIPTIONUNITS OF

MEASURE

30µm PU Film on a

Filmic Liner with High Tack PSA

30µm PU Film on a Filmic

Liner with Medium Tack PSA


Liner with Breathable

PSA


Liner with a Medium Tack PSA


Liner with a Medium Tack PSA

60µm PU with a Medium Tack PSA


Liner with a Medium

Tack Pattern PSA


Liner with a Medium

Tack Pattern PSA


Liner with a High Tack

Pattern PSA


Liner with a High Tack

Pattern PSA


Liner with a Medium

Tack Pattern PSA

PU FILM/FOAM THICKNESS µm 30 30 30 30 30 60 30 30 30 15 20

COLOR / PRODUCT CODE OTHER COLORS AVAILABLE

ON REQUEST

Clear 2327 2331 1305 2325 2375P 2155P 1201P

Pink 2353 2351 2601 2371P 2376P 1206P

Beige

White

CASTING LINER RELEASE FORCE

N/25mm/ PU Release

0.15 0.15 0.14 0.15 0.15 N/A 0.2 0.2 0.2 0.12 0.12

PU CASTING LINER TYPE Film Film Film Film Film N/A Film Film Film Film Film

FINISH Matt Clear / Matt Clear / Matt Clear / Matt Clear / Matt Pink / Matt Clear / Matt Pink / Matt Clear / Matt Pink / Matt Clear / Matt Clear / Matt

BACTERIAL BARRIER Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

MVTR UPRIGHT g/m2/24hrs 600 600 1400 800 600 450 1500 1600 2000 3500 2500

MVTR INVERTED g/m2/24hrs 650 650 1400 850 650 500 4400 4400 8000 9000 5000

TENSILE STRENGTH N/25mm 27.5 27.5 35 27.5 27.5 >50 27.5 27.5 27.5 14 20

ELONGATION % 475 475 50 475 475 800 475 475 475 400 475

SUITABLE FOR GAMMA STERILIZATION

Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes

SUITABLE FOR ETHYLENE OXIDE STERILIZATION

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

PSA LINER TYPE N/A Paper Paper Paper Paper Paper Paper Paper Paper Paper Paper Paper

TYPICAL ADHESION TO STEEL N/25mm 19 13 19 12 13 13 17 17 8 8 17

ADHESIVE DEPOSIT g/m2 40 40 25 25 40 40 18 18 12 12 18

PATTERN COATING COVERAGE % 100 100 100 100 100 100 75 75 50 50 75

PSA LINER RELEASE N/25mm 0.05 0.05 0.04 0.07 0.07 0.06 0.1 0.1 0.1 0.1 0.06


0.78 0.78 0.78 0.95 0.95 0.85 0.95 0.95 0.95 0.95 0.95


0.3 0.3 0.3 0.3 0.3 0.3 0.45 0.45 0.45 0.45 0.45

PRINTABLE PU CASTING LINER Yes Yes Yes Yes Yes N/A Yes Yes Yes Yes Yes

PRODUCT DESCRIPTION

Adhesive coated films are used for a variety of applications including secondary wound dressings, island dressings and plasters. The materials with clear filmic casting liners are also suitable for applications where there is a need to see the wound as the dressing is applied or for incise applications.

Available in Clear, Pink, or Blue and can be printed with FDA approved inks.

CHARACTERISTICS

• Exceptional breathability

• Superior soft feel and high conformability

• Waterproof, bacterial barrier


• Good transparency and exceptional matt surface

• Tested in accordance with ISO 10993 (Biological evauation of medical devices)

• Available with either film or paper casting liners

• Available in Master Rolls or slit to the customer's specification

ADHESIVE COATED POLYURETHANE FILMS

FOAMS

PRODUCT DESCRIPTION UNITS OF MEASURE 130µm Film / Foam 15µm PU Film / Foam 250µm PU Film / Foam 400µm Film / Foam

PU FILM/FOAM THICKNESS µm 130 250 250 400

COLOR / PRODUCT CODE OTHER COLORS ARE AVAILABLE ON REQUEST

Clear

Pink 7210 7252 7255 7242

Beige 7250 7240

White 7251 7241

PU CASTING LINER TYPE Paper Paper Paper Paper

FINISH Matt Matt Matt Matt Matt

CASTING LINER RELEASE FORCE N/25mm/PU Release 0.10 0.15 0.15 0.15

BACTERIAL BARRIER No Yes Yes Yes

MVTR UPRIGHT g/m2/24hrs 2500 4000 1500

MVTR INVERTED g/m2/24hrs 2500 3500 5000 2500

TENSILE STRENGTH N/25mm 12 25 20 30

ELONGATION % 400 450 450 450

SUITABLE FOR GAMMA STERILIZATION No Yes* No Yes*


- 0.85 0.85 0.85


- 0.35 0.35 0.35

PRINTABLE PU CASTING LINER Yes Yes Yes Yes

SPECIALTY PRODUCTS

*Dependent on dose

CHARACTERISTICS

Transcontinental Advanced Coatings has experience in coating specialty products to meet particular customer needs. This expertise includes:

• Printing of films

• Patterned adhesive coating

• Gamma sterilizable adhesives

• Pigmentation of films

• Coating of customer supplied/approved adhesive

Recommended storage conditions of 23°C ±5°C, 50% ±10% Humidity. Consult Material Safety Datasheet before transport, storage or use. Although every effort has been made to supply reliable data, the values listed are for guidance purposes only and do not consitute a specification. Each user must make their own tests to determine the suitability of the material for their own use. The material referenced in this Product Guide is a component to be used in the construction of products that are for external use only. Nothing contained herein is intended as a recommendation to use our products to infringe any patent.

PLEASE CONTACTTranscontinental Advanced Coatings directly if your application has not been covered by our standard range (contact details below)

CONTACTCHINA Site:+86 20 3221 8338Transcontinental ChinaFactory 2-101No 96 Banhe Road, Huangpu DistrictGuangzhou 510730

UK Site:+44 1978 660241Transcontinental United KingdomAsh Road NorthWrexham Industrial EstateWrexham, LL13 9UF

USA Site:+1 704 847 9171Transcontinental Matthews700 Crestdale RoadMatthews, NC 28105

For more information, please visitwww.tc.tc/advancedcoatingsor email [email protected]


PRODUCT DESCRIPTION

Uncoated polyurethane film/foam laminate components that are typically used for professional wound care applications. Can be printed with FDA approved inks.

Available in White, Pink, Beige and Brown.

CHARACTERISTICS

• Exceptionally soft feel with cusioning and insulating characteristics

• Waterproof and breathable


• Outer film provides bacterial barrier and easy clean surface

• Used to create dressings that can be applied without the need for support films/papers

• Available in Master Rolls or slit to the customer's specification

POLYURETHANE FOAMS

medical components for wound care, ostomy and … · for over 35 years manufacturers around the...

Documents