measurement engineering for heating and installation and heating... · 2006-06-13 · flue gas...

1

Measurement Engineering for Heating and Installation

Icons

Backlit display

Infrared printer

Reliable printout of measurementresults on site

Barcode reader

Used for data administration,customer allocation and schedu-ling

RS 232 interface

For easy connection to all sectorsoftware

User-friendly operation due tomenu-driven functions

SoftCase or TopSafe to protectinstrument during tough applica-tions

Shock-proof

Battery operation also possible

Battery can be recharged ininstrument

Flue Gas Analysis

Installation

Safety

Accessories Page 16

testo 325-2/3 Page 6-9

testo 325 M/XL Page 6-9

testo 300 M/L/XL Page 10-13

testo 300 XXL Page 14-15

Temperature Page 18-21

Pressure Page 21-23

Endoscopy Page 24

Wood/Material moisture meter Page 24

Gas leak detector Page 25

Flue gas spillage detector Page 25

CO warning instrument Page 26-27

Contents

2

New opportunities: The market for the supply of heat to buildings ischanging constantly. Solar systems, heat pumps and other technolo-gies, integrated concepts for energy supply and electronic controlsystems have established themselves. The objectives remain thesame - demand controlled heat supply, low energy consumption andlow emissions.

Regardless of the technology involved – every furnace must function100%; regular checks and tuning are therefore required. Our contribu-tion: We supply the best measurement engineering. We follow alldevelopments attentively, we are there wherever there is somethinggoing on. We recognise trends far in advance and can therefore offerwell-engineered applications ahead of the competition. You haverewarded us for our commitment by making us number one world-wide in the heating engineering sector.

Playing it safe.Measuring instruments must be reliable and efficient. For this reason,once developed we do not regard our products as being ready for themarket. Instead, we subject them to tough tests in the field. It is only

when this test is successful that we start with serial production. Allmeasuring instruments which leave our factory undergo qualityinspections.

Spoilt for choice?It is impossible to find another product line with so many well-engi-neered, mobile gas analysers as we have. We admit that that couldsometimes make the decision more difficult for you but you are guar-anteed that you are working with the best suited product for yourmeasurement job. Regardless for which flue gas analyser you decide,you can be assured that the gas paths are optimised i.e. are kept asshort as possible. Susceptibility and corrosion are thus avoided. Theresults of your measurements are made available immediately. User-friendly and intelligible operation, a well thought-out accessory andmeasurement case system ensure that you can work – efficiently, fastand professionally.

Combustion points undercontrol

3

“Is there a heatingfitter in R&D?”

Edgar Mesam laughs astutely when askedabout the quality of our products. The com-mitted owner of a heating and plumbing busi-ness in Bannholz has been a customer ofTesto for many years. As a heating fitter, he iscommitted to protecting the environment. Weasked him to speak about his experience withTesto products.

Edgar Mesam:“We are mainly involved in the maintenanceand upkeep of existing systems. It is not asspectacular as the installation of renewableenergy technology (which we also do, ofcourse) but the potential for saving energy ishuge. A defective system can use more than50% more energy compared with a system ingood working order and just an incorrectlyadjusted system can mean increased powerconsumption of 20 to 30%.

My most important tool for adjusting heatingsystems is first-class measurement engineer-ing which I get from Testo – all-inclusive, fromthe flue gas analyser to the fiberscope andeverything that goes with it. In my own expe-rience – and I have been in the business for20 years – no other manufacturer meets therequirements in the field like Testo does withits products.

Another important point: With Testo, I don´thave to grapple with the measurement engi-neering I get, I can select what I need for myrequirements from the wide range of equip-ment and accessories within an instrumentline.

Keep up the good work! I´m already lookingforward to the newest innovations which havealways convinced me up to now!

Edgar Mesam,Mesam GmbHHeating and Plumbing

Measurement cells with added value!The sensors specially developed for Testo have an above-averagelifetime of 2-3 years. One outstanding feature are measuring instru-ments in which you can exchange the measurement cell yourself –without the need for test gas calibration. Back in operation immedi-ately – couldn´t be quicker.

The cheapest measuring instrument sometimes turns out to be themost expensive...Heating problems in Winter. A true emergency! And your flue gasanalyser breaks down today of all days! This is where we come in. Weare proud of the top quality service we provide.

Learning changesWhat was that? What flue gas flows are permitted according to theregulations governing wood furnaces? We offer in-depth documenta-tion and leaflets on Testo Measurement Engineering, current stan-dards and guidelines and their implementation.

testo 325

testo 300 M/L/XL

testo 300 XXL

Page 10

Page 14

The right flue gas analyser for ev

For

heating

systems

5very requirement

Versatile instrument for professional maintenance

Comfort instrument for professional maintenance

Top instrument for extreme demands testo 300 XXL

testo 300 Mtesto 300 L/XL

Starter instrument with proven efficiency

Introduction to professional maintenance

testo 325 Mtesto 325 XL

Control measurement on the gas heater

Basic adjustments on oil and gas burners

testo 325-2

testo 325-3

OutlineAdjusting efficiency: TÜV approved O2, CO2, qA, °C, λ

Combustion quality: CO flue gas

Up to 2000 ppm, for gas systems

Up to 4000 ppm, for gas or oil systems with low pollution

No for low NOx inspections

Flue draught

Differential temperature, adjusting flow and return temperatures

Protection of CO measurement cell via switch-off function

Differential pressure, for adjustment of pressure ratios in gas systems, mbar/hPa

Probe for detecting gas leaks

Protection: Probe for measuring ambient CO

Printout with data and time

Timer function: Audible/optical alarm

Immediate stand-by: Measurement cells are exchanged without test gas adjust-mentAllocation and processing of information (analysis software)

Built-in data memory, no. of data blocks

Transmission of readings via RS 232 interface

Printer connection with print text

Barcode connection

State inspection: TÜV approved CO

* Only for testo 300 XL

8000 ppm, for oil systems with a high pollution level

30,000 ppm, for oil systems with extreme pollution and solid fuel systemsOpt.

Opt.Opt.

Autom.Man.

Opt.

40 40 40/200 40/200 80 80 80/1000

20 100 4000

testo testo testo testo testo testo testo

325-2 325-3 325 M 325 XL 300 M 300 L/XL 300 XXL

*

*

6

testo 325 – Introduction to Professional Flue Gas Analysis

Large, backlit display

Condensate trap in instru-ment

Gas pressure measure-ment with additionalsocket for +/-

User-friendly operation

Do you manage toget home by 5pmevery day?

Probably not,because yourjob expectsabove-averagededication. Youalso need part-ners who won´tlet you down.We are leadingthe way with ourquality service.

Check it out for yourself.

Do you need an accessory, doyou have a question about meas-uring or do you need a replace-ment instrument? – Testo Serviceemployees are at your service inmany locations – also near you.Good to know when the situationrequires.

Hans-Dieter Guth,Market ManagerContractors BU,Germany

7

testo 325 M / 325 XLtesto 325 M and XL instrumentssupply all important parameters(O2, CO, °C) at a glance.

They enable differential tempera-ture and differential pressuremeasurements (40/200 hPaswitchable) and fulfill all therequirements for the adjustment,maintenance and servicing of gasand clean oil burners (CO to4000 ppm).

• O2 TÜV approved

• Data documentation printed onsite

testo 325 XL: Additional features:

• TÜV approved CO measure-ment function

• Cache for

- CO level, environment

- O2 concentration, ingoing air

• Specific factors can be set for 6fuels

• Memory for 20 data blocks

• Battery recharging in instrument

testo 325-2 / 325-3The testo 325-2 and -3 instru-ments offer the standard func-tions of flue gas analysis for thebasic adjustment of oil and gasburners.

testo 325-2 measures O2 in fluegas, flue draught and calculatesflue gas loss and efficiency.

testo 325-3 measures the COlevel (up to 2000 ppm), draughtand gas flow pressure.

• TÜV approved O2, CO2 andtemperature measurementfunction

• Measures flow/return tempera-ture with separate probes; ∆Tdisplay (325-2/3)

• Data documentation printed onsite

• Magnetic SoftCase for protec-tion and positioning

testo 325 XL

testo 325-2/-3 testo 325 M testo 325 XLTechnical data

Temperature measurement

Meas. range -40 to +600 °C -40 to +600 °C -40 to +600 °C

Draught/Pressure measurement

delta P1 ±40 hPa ±40 hPa ±40 hPa

Efficiency measurement (Eta)

Flue gas loss (qA)

Meas. range 0 to 120 % 0 to 120 % 0 to 120 %

Meas. range 0 to 99.9 % 0 to 99.9 % 0 to 99.9 %

O2 measurement

Meas. range 0 to 21 Vol. % 0 to 21 Vol. % 0 to 21 Vol. %

CO measurement

Meas. range 0 to 2000 ppm 0 to 4000 ppm 0 to 4000 ppm

CO2 measurement

Display range 0 to CO2max 0 to CO2max 0 to CO2max

delta P2 ±200 hPa

testo 325-3 SetFlue gas inspection instrument

testo 325-3 flue gas analyser incl. batteries and calibration protocol

Flue gas probe, 180 mm immersion depth

Case

testo 325 M Basic SetStarter instrument for flue gas analysis

testo 325 M, flue gas analyser incl. battery and calibration protocol

230 V power unit for mains operation and recharging batteries

Compact flue gas probe, 180 mm immersion depth

Ambient air probe, 190 mm immersion depth

System case for measuring instrument, probe and accessories

SoftCase made of elastic plastic incl. magnetic plate and carrier strap

Testo printer

Part no. 0563 0332

Part no. 0563 0340

testo 325 M

O2, draught, °C measurement

Part no. 0563 0330

Flue gas analyser, incl. batteries andcalibration protocol

O2, CO2, °C, CO

Part no. 0632 0322

Flue gas analyser incl. battery and cali-bration protocol

testo 325-2

Time for the essentials“To be quite honest, the phones are usually quiet between 6 and7pm but the few who do call are delighted when somebody answers the phone.That´s why I´m happy to be here. Testo, at your service!

Regina MarxSales

testo 325 XL Basic SetProfessional flue gas analysis

testo 325 XL, flue gas analyser incl. rech. battery and calibration protocol

230 V power unit for mains operation and to recharge batteries

TÜV approved flue gas probe, 180 mm immersion depth

Ambient air probe, 190 mm immersion depth

System case for instrument, probe and accessories


Smoke tester

Part no. 0563 0334

O2, CO2, °C, CO, H2

Part no. 0632 0321

Flue gas analyser incl. rechargeablebattery and calibration protocol

±200 hPa

8

Part no.

Part no.

0554 0545

0554 0569

0554 0568

0554 1084

0554 0315

0554 0449

0554 0040

0554 0307

0554 0308

0516 0326

0516 0329

0516 0328

0516 0331

0516 3250

0516 2570

Part no.

Part no.

0600 9544

0600 9542

0600 9543

0600 9546

0632 1244

0600 8540

0600 9440

0516 2572

Printer and Accessories

Suitable probes at a glance Illustration

Testo printer with 1 roll of thermal paper and 4 AA size batteries, Prints readings on site

Accessories

300 mm

Ø 8 mm

180 mm

Ø 8 mm

Additional Accessories and Spare Parts

Spare thermal paper for printer (6 rolls)

Spare thermal paper for printer (6 rolls), Measurement data documentation legible for up to 10 years

Hose connection set, incl. silicone hose and connection adapter, For separate gas pressure measurement

Pressure connection hose, single, diameter: 4/6 mm, 50 cm long, without connection adapter

Spare particle filter (10 off)

Smoke tester with oil, soot sheet, for measuring soot in flue gas

Filter paper to determine smoke number, 40 strips for approx. 200 measurements

System case for measuring instrument, probe and accessories, easily attached to other system cases

Tools system case with tools bag without contents, attachable to system case 0516 0326

Product line system case with small plastic boxes without contents, attachable to system case 0516 0326

Universal system case without sections, attachable to system case 0516 0326, For easy storage of measuring instrument and additionalaccessories

Transport case (plastic) for instrument, probes and accessories, For safe and orderly storage

Transport and Protection

SoftCase made of elastic plastic with magnetic plate, carrier strap, Protects instrument from dirt and impact (testo 325-2/-3)

Compact flue gas probe, 180 mm immersion depthincl. probe stop for positioning, NiCr-Ni thermocoupleup to +500°C, 1.5 m hose

Compact flue gas probe, 300 mm immersion depthincl. probe stop for positioning, NiCr-Ni thermocoupleup to +500°C, 1.5 m hose

TÜV approved flue gas probe, 180 mm immersiondepth, corresponding to the latest instrument testguidelines for measurements on atmospheric gassystems, 2.2 m hose TÜV approved flue gas probe, 300 mm immersiondepth, corresponds to the latest instrument testing gui-delines, for measurements on atmospheric gas systems,2.2 m hose

Dual wall clearance probe, sickel shaped supply O2probe for measuring the O2 level in systems inde-pendent of ambient air

For testo 325 XL only

High temperature probe, TI thermocouple up to1000°C, 300 mm immersion depth, incl. probe stop,heat protection screen, 2.2 m hose

Flexible flue gas probe, 330 mm immersion depth,NiCr-Ni thermocouple up to +500°C, 2.2 m hose

Ø 8 mm

180 mm

Ø 8 mm

300 mm

Ø 8 mm

300 mm

Ø 10.5 mm

330 mm

SoftCase made of flexible plastic incl. magnetic plate and carrying strap, protects analyser from dirt and impact (testo 325 M/XL)

Power unit 230 V/ 8 V/ 1 A, for instrument (European plug), For mains operation and battery recharging

9

Clamp probe for measurements on pipes, pipe dia-meter 15 to 25 mm (max. 1"), meas. range short-term up to +130°C

-50 to +100 °C Fixed cableClass 2 5 s

Pipe wrap probe with Velcro strip, for temperaturemeasurement on pipes with diameter up to max. 120mm, Tmax +120°C

0 to +120 °C Fixed cableClass 1 90 s

150 mm

Ø 4 mm

60 mm

Ø 4 mm

190 mm

Ø 4 mm

395 mm

20 mm

The complete set in a robust case

Everything is stored ready to hand and easy to find in a robust andpractical Testo system case: testo 325 M flue gas analyser, powerunit, 180 mm compact flue gas probe, 190 mm ambient air probe,SoftCase, Testo printer, multimeter, smoke tester, magnetic tester,nozzle spanner, pressure test set, pressure meter, spillage detector,gas leak stick and service labels – i.e. fully equipped for maintenanceon oil burners and gas heaters.

testo 325 M – Set with all the tools you need for maintenance

Meas. range Accuracy Conn.t99IllustrationTemperature probes

Quick-action surface probe with sprung thermocou-ple strip, for measurements on floor heating systems,radiators, insulations...

-60 to +300 °C Fixed cableClass 2 3 s

Ambient air probe, immersion depth 190 mm, withprobe stop, magnetic clip, Tmax +100°C, for ambientair temperature measurement in systems which aredependent on/independent of ambient air

0... +100 °C

Ambient air probe, immersion depth 60 mm, with probestop, magnetic clip, Tmax +100°C, for dual wall clea-rance temp. meas. in systems with outside primary airintake

0 to +100 °C 30 s

35 mm

testo 325 M – Set with all the tools you need formaintenance

testo 325 M, flue gas analyser incl. battery and calibration protocol


Compact flue gas probe, 180mm immersion depth

Ambient air probe, 190mm immersion depth

System case for measuring instrument, probe and accessories


Testo printer

Multimeter

Smoke tester

Nozzle spanner

Pressure test set

Pressure meter

Spillage detector

Gas leak stick

Service labels

Part no. 0563 0333

0602 4692

0628 0020

Part no.

0602 0392

0600 9788

0600 9798

10

How manydegrees are therereally?

How can you besure that youranalyser meas-ures exactlywhat it shouldbe measuring?Our certifiedDKD laborato-ries are unbeat-able in theiraccuracy and

give the values for all Testo meas-uring instruments – That’s whattrue measurement efficiency is allabout.

The competence of our engineersis held in high esteem by expertgroups and committees in Berlinand Brussels where they areinvolved in the developments offuture guidelines in their capacityas representatives of industry.

A comprehensive exchange ofknowledge and experience withofficial measurement institutesaround the world (e.g. DKD)ensures that your Testo measur-ing instrument can hold up to anycomparison. Indeed, these effortsdo have an objective: whoeveruses Testo measurement engi-neering, can be assured that heis using the industrial standard.

Of further benefit to you: Weknow today about the guidelinesand test specifications we will befaced with in the future.

Easy to read display

Gas sensors which canbe changed by the user

SoftCase with magneticholder

Clear allocation for easyoperation

Knut Hoyer, Head of Compe-tence Center forGas Analysis

testo 300 – Perfect for Professional Maintenance

11

testo 300 M SetProfessional analysis for heating fitters

Customer Service – Individual

“Since we started offering Service and Repairs in Customer Cen-ters, we now suddenly have more customers dropping by for a cup of coffee.Most of them are able to take the repaired instrument home a little later.”

Horst KohlheimService technician, Customer Center North Germany

O2, CO2, °C, CO

Part no. 0563 0310

Professional flue gas analyser, incl.rechargeable battery and calibrationprotocol

testo 300 M

O2, CO2, °C, CO, (NO)

Part no. 0563 0345

Flue gas analyser incl. rechargeablebattery and calibration protocol, 100memory

testo 300 L

O2, CO2, °C, CO, (NO)

Part no. 0563 0300

Pro flue gas analyser, incl. rech. battery andcal. protocol, 100 memory, gas leak detec-tion probe/ambient CO probe connection

testo 300 XL

testo 300 M, flue gas analyser, incl. rech. battery and calibration protocol

SoftCase (dirt/impact protection for measuring instrument)

230 V power unit for measuring instrument


Mini ambient air probe, 190 mm long

System case with foam insert for measuring instrument, probes and accesso-ries

Testo printer for cordless reading printouts

Part no. 0563 0469

testo 300 L SetConvenient professional analysis

testo 300 L flue gas analyser incl. rechargeable battery and calibration protocol



Mini ambient air probe, 190 mm long

SoftCase protection case incl. magnetic plate

System case with foam insert for instrument, probes, accessories

Smoke tester incl. oil, soot sheets, reference scale

Part no. 0563 0471

testo 300 L/XLtesto 300 L/XL can be used tocarry out official measurements.The CO measurement can beswitched off manually.

testo 300 M: Additional features

• Memory for 100 (optional 400,testo 300 XL) data blocks

• Barcode reader to read in sys-tem data

• Attachable printer (testo 300XL)

• Gas leak detection probe (testo300 XL)

• Ambient CO probe (testo 300XL)

testo 300 Mtesto 300 M, the robust flue gasanalyser for all gas and oil burn-ers as well as clean solid fuelburners (CO to 8000 ppm).

testo 300 M can analyse andmanage measurement data onyour PC (RS 232 interface).

• TÜV approved CO, O2, CO2and temperature measurementfunction

• NO measurement (optional)

• H2 compensation

• Integrated condensate trap

• Large display (6 parameters ata glance)

• Mains connection, rechargeablebattery or battery operation

testo 300 M testo 300 L/XLTechnical data

Temperature measurement

Meas. range -40 to +1200 °C -40 to +1200 °C

Draught/Pressure measurement

delta P1 ±80 hPa ±80 hPa

Efficiency measurement (Eta)

Flue gas loss (qA)

Meas. range 0 to 120 % 0 to 120 %

Memory

Other features

20 100 testo 300 L

100 (400) testo 300 XL

Built-in printer, testo 300 XL,Gas leak detection probe,testo 300 XL,Ambient CO probe, testo 300XL

Meas. range 0 to 99.9 % 0 to 99.9 %O2 measurement

Meas. range 0 to 21 Vol. % 0 to 21 Vol. %

CO measurement (with H2 compensation)

Meas. range 0 to 8000 ppm 0 to 8000 ppm

CO2 measurement

Display range 0 to CO2max 0 to CO2max

12

Accessories

Printers and Accessories Part no.

0554 0545

0554 0569

0554 0110

0554 0424

0554 0315

0430 0143

0554 0307

Ordering data/Gas drier Part no.

Testo printer with 1 roll of thermal paper and 4 AA size batteries, Prints readings on site

Spare thermal paper for printer (6 rolls)

Recharger for printer (with 4 standard rech. batteries), Rechargeable batteries are recharged externally

Car charging adapter, ready to measure following recharging in car, Battery is recharged while travelling in car

Hose connection set, incl. silicone hose and connection adapter, For separate gas pressure measurement

Cable, 1.5 m long, connects probe with plug-in head to meas. instrument , PUR coating material

Smoke tester with oil, soot sheet, for measuring soot in flue gas

Transport and Protection Part no.

Additional Accessories and Spare Parts Part no.

0554 3371Spare particle filter for flue gas analyser (10 off)

0554 0308Filter paper to determine smoke number, 40 strips for approx. 200 measurements

0516 0301SoftCase (protects instrument from dirt and impact) made of elastic plastic, with carrier strap and magnetic plate

0516 0100Transport case (leather) for instrument, probes and accessories, Robust, spacious case made of real leather

0516 0306Aluminium case for instrument, probe and accessories, Probes in lid make it easy to find parts in case

0516 0300Transport case (plastic) for measuring instrument, probes

0516 0303Measurement case (leather) with drawers for instruments and accessories

0516 0310System case for analyser, probes and accessories

0516 0328Product line system case with small plastic boxes without contents, attachable to system case 0516 0326

0516 0329Tools system case with tools bag without contents, attachable to system case 0516 0326

0516 0331Universal system case without sections, attachable to system case 0516 0326

0632 3370Compact gas drier, basic version, For measurements with a high condensate level (manual condensate emptying)

0632 3371Compact gas drier, Comfort version, For measurements with a high condensate level and long-term measurements (automatic condensateemptying)

0554 1143Power unit for compact gas drier and flue gas analyser

0449 0034Current connection cable, connects gas drier to flue gas analyser, Supplies power to flue gas analyser via the compact gas drier power unit

0554 3370Spare particle filter for compact gas drier (5 off)

0554 1084

0440 3922

0554 3922

0390 0072

0390 0074

0390 0070

0554 0310

0409 0178

PC Software and Accessories Part no.

Power unit 230 V/ 8 V/ 1 A, for instrument (European plug), For mains operation and battery recharging

NO measuring cell, Built-in in flue gas analyser

NO measuring cell (upgrade), For subsequent installation in flue gas analyser

Spare CO measuring cell, Quick and easy replacement of measuring cell by user

Spare NO measuring cell, Quick and easy replacement of measuring cell by user

Spare O2 measuring cell

Economical software, Windows® software for data management, With convenient analysis and graphics function, online measurement andbarcode printout

RS232 cable, Connects instrument to PC (1.8 m) for data transfer

13

180 mm

Ø 8.0 mm

Ø 8.0 mm

700 mm

Ø 8.0 mm

300 mm

Ø 8.0 mm

300 mm

330 mm

Ø 10.5 mm

150 mm

300 mm

Ø 5 mm

35 mm

15 mm

60 mm

Ø 4 mm

190 mm

Ø 4.0 mm

Ø 10 mm

200 mm

Ø 20 mm

190 mm

Ø 25 mm

Additional Ordering Data for Accessories/Suitable Probes at a glance

Accessories Ordering data for testo 300 XL only Accessories Ordering Data for testo 300 L/XL Part no.

Memory extension to 400 data blocks, Saves readingsfrom up to 400 complete systems in testo 300 XL

Part no.

0440 0122

Attachable printer (securely attached) including 1 roll ofthermal paper and batteries

0554 0570

SoftCase for attachable printer (protects printer fromdirt/impact), Protects from impact and falls

0516 0411

Barcode reader to read in measurement locations,Quick and accurate allocation of reading to site

0554 0460

Barcode labels, self-adhesive (1200 off), Location mar-ked with barcode, printing via software

0554 0411

Adhesive pockets (50 off) for printout, paper barcodelabels...

0554 0116

Probes Illustration Part no.

Compact flue gas probe, 180 mm immersion depthwith probe stop, NiCr-Ni thermocouple up to +500°C,built-in independent condensate trap and particle fil-ter, 2.2 m hose

0600 9534

Compact flue gas probe, 300 mm immersion depthwith probe stop, NiCr-Ni thermocouple up to +500°C,built-in independent condensate trap and particle fil-ter, 2.2 m hose

0600 9532

Flue gas probe, 300 mm immersion depth with probestop, NiCr-Ni thermocouple up to +1000°C, built-inindependent condensate trap and particle filter, 2.2 mhose

0600 8532

Flue gas probe, 700 mm immersion depth with probestop, NiCr-Ni thermocouple up to +1000°C, built-inindependent condensate trap and particle filter, 2.2 mhose

0600 8531

Flexible flue gas probe, 330 mm immersion depth,NiCr-Ni thermocouple up to +500°C, integrated con-densate trap independent of position and particle fil-ter, 2.2 m hose (without flue draught measurement)

0600 9430

Meas. range Accuracy Conn.t99IllustrationTemperature probes Part no.

Ambient air probe, 300 mm immersion depth, withprobe stop for separate measurement of ambient airtemperature (e.g. systems with outside primary airintakes)

0600 97910 to +100 °C

Mini ambient air probe, 60 mm immersion depth, w.probe stop, magnetic clip, Tmax +100°C, for dualwall clearance temp. meas. in systems w. outside pri-mary air intakes

0600 97970 to +100 °C

Ambient air probe, immersion depth 190 mm, with probestop, magnetic clip, Tmax + 100°C, for ambient air tem-perature measurement in systems dependent on/inde-pendent of ambient air

0600 97870 to +100 °C

Mini ambient air probe, Tmax +80°C, for separateambient air temperature measurement

0600 36920 to +80 °C

Pipe wrap probe for pipes with diameter of up to 2", forflow/return temperature measurement in hydronic sys-tems

0600 4593-60 to +130°C

Fixed cableClass 2 5 s

Spare meas. head for pipe wrap probe 0602 0092-60 to +130

°CClass 2 5 s

Quick-action surface probe with sprung thermocouplestrip, for measurements on floor heating systems, radia-tors, insulations...

0604 0194-200 to +300°C

Plug-in head.connection cable0430 0143 or0430 0145 requi-red

Class 2 3 s

Meas. range Other featurest90IllustrationFor testo 300 XL only Part no.

Gas leak detection probe to detect leaks in gas hea-ting systems

0632 12460 to +10000ppm CH4

1st alarm limit: 200 ppm CH42nd alarm limit: 10,000 ppm CH4Alarm: optical display (LED) and audible signal (buzzer) triggered ifalarm limit is exceeded

2 s

Ambient CO probe to measure CO level in ambientair

0632 12470 to +500ppm CO

35 s

Dual wall clearance probe, sickle shaped supply O2probe for measuring the O2 level in the dual wall clea-rance of systems independent of ambient air

0632 1248

14

Removable control unit

Built-in printer

Stable connections forpressure and velocitymeasurement

testo 300 XXL – Top equipment for extreme maintenance requirements

testo 300 XXLUsing the testo 300 XXL meas-urement system it is possible tocarry out all measurement jobson all gas, oil and solid fuel fur-naces at highest flexibility (CO isoptional up to 30000 ppm).

The measurement system ismade up of an analysis box forflue gases and a control unitwhich also serves as a hand-heldinstrument for additional ambientmeasurements.

• Automatic CO fresh air rinse• Hot spot search during the

zeroing phase• Memory: 4000 data blocks• Built-in printer• 8 user defined function buttons• Adjustable timer with alarm

function • Touchscreen (optional) • NOX (NO, NO2) measurement

Experts are our favourite cus-tomers

...because theyknow what theyare doing. Weoffer you oursupport with ourfield-orientedtrainings onmeasurementprocedures, andon physicalcohesions.

Even more important is theexchange with other specialistsfrom your branch. After all, weare dealing with your compe-tence and your professional rou-tine when using our instruments.

By the way: 98% of our trainingparticipants fully recommend ourseminars and training.

Detlef Higgelke,Head of TestoAG Academy

15

TÜV approved flue gas probe, 180 mm immersiondepth, up to +500°C, corr. to the latest instr. test gui-delines, also for meas. on atmospheric gas systems,2.2 m hose

0600 9556

TÜV approved flue gas probe, 335 mm immersiondepth, up to +500°C, corresponding to the latestinstrument test guidelines, also for atmospheric gassystems, 2.2 m hose

0600 9557

Flue gas probe, 335 mm immersion depth incl. probestop, NiCr-Ni thermocouple up to +500°C, 2.2 m (sui-table for use with NO2 sampling)

0600 8550

Flue gas probe, 335 mm immersion depth incl. probestop, NiCr-Ni thermocouple up to +1000°C, 2.2 m(suitable for use with NO2 sampling)

0600 8552

Flue gas probe, 700 mm immersion depth incl. probestop, NiCr-Ni thermocouple up to +1000°C, 2.2 m(suitable for use with NO2 sampling)

0600 8551

Probes Part no.

testo 300 XXL analysis box, with built-in power unit, condensate trap, calibration protocol,measures temperature, flue gas dew point, flue draught, O2, CO2, CO (H2 compensa-ted), flue gas loss, efficiency, excess air

0563 0352

testo 300 XXL control unit, displays measurement data and controls the analysis box, incl.built-in printer, backlit display, temperature and pressure measurement, 1 user definedprobe socket (leak detection probe, ambient CO probe, ambient air probes), RS 232interface, data memory for 4000 data blocks

0563 0354

Cable, coiled, 2m, connects control unit and analysis box 0449 0052

Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307

Mini ambient air probe, 60 mm immersion depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in systems w. outside primary air intakes

0600 9797

Transport case for analyser, probes and accessories 0516 0351

TÜV approved flue gas probe, 335 mm immersion depth, up to +500°C, correspondingto the latest instrument test guidelines, also for atmospheric gas systems, 2.2 m hose

0600 9557

testo 300 XXL analysis box, with built-in power unit, condensate trap, calibration protocol,measures temperature, flue gas dew point, flue draught, O2, CO2, CO (H2 compensa-ted), flue gas loss, efficiency, excess air

0563 0352

testo 300 XXL control unit, displays measurement data and controls the analysis box, incl.built-in printer, backlit display, temperature and pressure measurement, 1 user definedprobe socket (leak detection probe, ambient CO probe, ambient air probes), RS 232interface, data memory for 4000 data blocks

0563 0354

Cable, coiled, 2m, connects control unit and analysis box 0449 0052

Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307

Mini ambient air probe, 60 mm immersion depth, w. probe stop, magnetic clip, Tmax+100°C, for dual wall clearance temp. meas. in systems w. outside primary air intakes

0600 9797

Quick-action hot wire probe, Ø 10 mm, with telescopic handle, for measurements in thelower velocity range with direction recognition

0635 1041

Transport case for analyser, probes and accessories 0516 0351

Gas leak detection probe to detect leaks in gas heating systems 0632 1246

Ambient CO probe to measure CO level in ambient air 0632 1247

TÜV approved flue gas probe, 335 mm immersion depth, up to +500°C, correspondingto the latest instrument test guidelines, also for atmospheric gas systems, 2.2 m hose

0600 9557

°C, m/s, %RH, hPa, CO, CO2, rpm,mA

Part no. 0563 0354

testo 300 XXL control unit, displaysmeasurement data and controls theanalysis box, incl. built-in printer, back-lit display, temperature and pressuremeasurement, 1 user defined probesocket (leak detection probe, ambientCO probe, ambient air probes), RS232 interface, data memory for 4000data blocks

testo 300 XXL Control unit

O2, CO2, °C, CO, (NO), (NO2)

Part no. 0563 0352

testo 300 XXL analysis box, with built-in power unit, condensate trap, cali-bration protocol, measures tempera-ture, flue gas dew point, flue draught,O2, CO2, CO (H2 compensated), fluegas loss, efficiency, excess air

testo 300 XXL analysis box

NO measuring module, 0 to 3000 ppm, built into ana-lysis box 0440 3935

Power unit 230 V/ 8 V/ 1 A, for instrument (Europeanplug), For mains operation and battery recharging 0554 1084

NO2 measuring module, built into analysis box 0440 3926

CO solid fuel measurement set consisting of gas pre-paration, strong pump and measuring range extensionmodule

0440 0567

CO solid fuel measurement upgrade (available fromservice point) 0554 0567

Touch screen with pen (available only with originalorder) 0440 0559

Cable, coiled, 2m, connects control unit and analysisbox 0449 0052

Hose connection set, incl. silicone hose and connec-tion adapter 0554 0315

Pressure drop test set 200 mbar, incl. manual bulbpump, hoses, T-fitting with valve, conical test stopper 0554 3153

High pressure test pump (for test pressures greaterthan 500 mbar) 0554 3157

Spare thermal paper for printer (6 rolls) 0554 0569

Transport and Protection Part no.

Software and Accessories Part no.

Accessories and Spare parts Part no.

Carrying strap set for analysis box and hand-held ana-lyser 0440 2545

Measurement case (leather) with drawer for analysersand accessories 0516 0307

Configuration and adjustment software for instrumentprogramming/set-up 0554 0507

PC analysis software for producing graphs, charts,diagrams, tables and for customer data management 0554 0508

RS232 cable 0409 0178

Technical data

O2 measurement

CO2 measurement 0 to CO2

0 to +25 Vol. %

CO measurement (H2 comp.)

Efficiency 0 to +120 %

0 to +10000 ppm

NO measurement (optional)

delta P 1

0 to +500 ppm

0 to +3000 ppm

Draught

Temperature measurement -40 to +1200 °C

delta P 2

Flue gas loss (qA) -20 to +99.9 %

NO2 meas. (optional)

See the testo 300 XXL brochure and www.testo.de for more information.

Recommended Set: testo 300 XXL, Basic Set for Installation

and Customer Service

Recommended Set: testo 300 XXL, Comfort Set for Installa-

tion, Customer Service, Damage Assessment/Analysis

-40 to +40 hPa

±1000 hPa

±80 hPa

16

Case

Printer

Readings documentation

The readings are sent to theTesto printer by infrared. We alsohave an additional attachableprinter for the testo 300 XL.

Case system

• The attachable case systemespecially for contractorsmakes it easy to transport allyour equipment

• The system case, particularlyrobust, made of ABS plastic,with foam inserts

• Unlimited extension possibilitieswith the Testo case system

Qualification

Heating MeasurementEngineering Qualification forHeating Fitters and ServiceEmployees.

Please ask us for moreinformation.

Common Accessories and Qualification

Testo printer with 1 roll of thermal paperand 4 AA size batteries

testo 575 fast printer, incl. 1 roll of ther-mal paper and batteries, Infrared thermalline printer with graphics function

Part no. 0554 0545

Part no. 0554 1775

System case for measuring instrument,probe and accessories, easily attachedto other system cases

Part no. 0516 0326

Tools system case with tools bagwithout contents, attachable to systemcase 0516 0326

Part no. 0516 0329

Product line system case with smallplastic boxes without contents, atta-chable to system case 0516 0326

Part no. 0516 0328

Universal system case without sec-tions, attachable to system case 05160326

Part no. 0516 0331

Measuring instruments for your safety

Temperature

Pressure

Endoscopy / Wood moisture

Indoor Air Quality

testo 905-T2 Page 18

Installation andSafety

Measuring Instruments for Installation

testo 925 Page 18

Differential temperature measurement – At aglance

Daily temperature measurement – Easy androbust

Surface temperature measurement

testo 935

Non-contact temperature measurement – Fastand clean testo 825-T2 Page 19

Detector for leaks on natural gas pipes testo 316-1 Page 25

Flue gas spillage detector for detecting esca-ping flue gas testo 317-1 Page 25

CO warning measurement – For your safety testo 315-2 Page 26

Versatile CO measurement – For safety and ser-vice testo 315-1 Page 27

2 in 1 temperature measurement – Non-contactor direct testo 825-T4 Page 20

Monitoring room temperature – Efficiently testo 174 Page 20

Monitoring temperature – Long-term andwithout interruption testo 175-T3 Page 21

Fiberscopes – For fast diagnoses testo 318-S Page 24

Pressure measurement – Ideal for field use, effi-cient and accurate testo 506 Page 21

Pressure measurement for gas and water instal-lation testo 312-2/-3 Page 22

Complete test system for gas and water instal-lation Test system Page 23

Compact wood/material moisture meter testo 606 Page 24

18

Checking flow temperature

TopSafe protects againstdirt and water

The testo 905-T2 measurementstick measures surface tempera-tures up to 500°C fast and effi-ciently. The sprung, wide thermo-couple measuring headguarantees a very quick reactiontime and a high accuracy level.

testo 905-T2

Measuring surface temperature e.g. in a radiator

With flexible joint

Flexible measuring head

Daily temperature measurement – Easy and robust

Surface temperature measurement

• User-friendly operation

• Easy-to-read

• Super fast measurement

• Auto Off function

Affordable and robust. The testo925 versatile thermometer is idealfor tough applications during dailytemperature measurements.

testo 925 • Hold button for freezing reading

• Large easy-to-read display

• TopSafe case protects from dirt,water and impact (optional)

Part no. 0560 9052

Surface temperature measurementstick with spring loaded probe, incl.multi-function clip, battery

testo 905-T2

Part no. 0560 9255

testo 925, thermometer, incl. batteryand calibration protocol

testo 925

Technical data

Meas. range

Battery life 150 h

-50 to +350 °C Short-term to +500°C

Technical data

Probe type

Meas. range -50 to +1000 °C

Battery life 150 h

Dimensions 190 x 57 x 42 mm

Weight 300 g

Type K (NiCr-Ni)

Ordering data for Accessories

TopSafe (protection case) with bench stand

Part no.

Suitable probes at a glance

Quick-action surface probe with sprung thermocouplestrip, for measurements on floor heating systems, radi-ators, insulations...

Part no.

0516 0186

0602 0392

19


Non-contact surface temperature measurement e.g. ina radiator

Water-tight and robustinside TopSafe (IP 67) andholder

With laser sighting

Differential temperature (flow/return) measurement

Data documentation prin-ted on site (optional)

The testo 935 differential ther-mometer measures the tempera-ture values of two probes simul-taneously. In this way, you canmeasure the temperature differ-ence between flow and return ina heating boiler. The large two-line display shows both valuesand the differential value can becalled up.

testo 935

Differential temperature measurement – At a glance

Non-contact temperature measurement – Fast and clean

• 2 probes can be connected

• Display: T1, T2 and differentialtemperature

• Button to hold readings and callup min and max values


Part no. 0560 9350

Thermometer, incl. battery and calibra-tion protocol

testo 935

The compact, fast responseinfrared thermometer testo 825-T2 accurately measures surfacetemperatures up to 400°C, forexample, at difficult to accesspoints.

testo 825-T2 • Laser sighting

• Emissivity adjustable from 0.20to 1.00

• Acoustic alarm sounds whenlimit is exceeded

• Wall/belt holder to quickly posi-tion instrument

Part no. 0560 8256

Infrared thermometer with laser sigh-ting and audible alarm, incl. TopSafeand wall/belt holder

testo 825-T2

Technical data


Battery life 150 h


Weight 300 g

Technical data


Measurement spot 1/3

Battery life 20 h

Dimensions 184 x 43.4 x 19 mm

Weight 80 g

Adhesive tape e.g. for polished surfaces (roll, 10 mlong, 25 mm wide), E = 0.93, temperature resistant upto +300°C

Part no.


TopSafe (protection case) with bench stand

Part no.


Pipe wrap probe for pipe diameter 5 to 65 mm, with exchange-able measuring head. Measuring range short-term to +280°C

Waterproof immersion/penetration probe

Part no.

Transport case (plastic) for instrument and accessories

0554 0051

0516 0183

0602 4592

0602 1292

0516 0184

20

Logging room temperature with immediate alarm dis-play if limits are exceeded

Temperature measurement on a non-smooth radiatorusing a self-adapting, flexible measuring head and non-contact measurement on a radiator

Monitor ambient temperature – Efficiently

2 in 1 temperature measurement – Non-contact or direct

Large display

Data transfer to PC ornotebook via interface(optional)

The testo 825-T4 infrared andcontact thermometer can meas-ure surface temperatures up to+400°C quickly and without con-tact or accurately by contact.The contact side is equippedwith a fast response sprungmeasurement head for shiny, re-flecting or uneven surfaces butalso for objects with unknownemissivities. The direct referencemeasurement with the infraredthermometer makes it possible todetermine and adjust the emis-sivity required for the infraredmeasurement.

testo 825-T4 • All the advantages of testo 825-

2

• Infrared and contact measure-ment in one instrument

• Emissivity adjustable to contactmeasurement

• Auto-Off function

The testo 174 mini data logger canmeasure room temperatures overlonger periods of time which means itcan be used to monitor the controlbehaviour of a thermostat valve. Thecurrent reading is shown in the dis-play. The following can be called up:Stored minimum and maximumvalue, limit values and battery life.

testo 174• Accurate, efficient temperature

logging with up to 3900 read-ings

• Alarm display if user definedmaximum/minimum values areexceeded

• Software for data export, dataanalysis and parameterisation(optional)

• Data secure even if battery isspent

Part no. 0560 8258

Infrared and contact thermometer withsighting laser and alarm, incl. TopSafeand wall/belt holder

testo 825-T4

Part no. 0563 1741

Temperature mini data logger, 1 chan-nel, incl. wall holder, lock and battery

testo 174

Part no. 0563 1742

Temperature mini data logger, 1 chan-nel, ComSoft 3 Basic, wall holder, lock,interface incl. PC connection cable,battery

testo 174, Starter Set

Technical data

Technical data

Infrared thermometer

Meas. range

Meas. spot Ø/Distance 1/3

-50 to +400 °C



Weight 24 g

Measuring rate 1 min to 4 h (selectable)

Datamemory

3900 readings

Battery life 500 days (typical)

Analysissoftware

MS Windows 95b / 98 /ME / NT4-Sp4 / 2000 /XP

Contact thermometer

Battery life 20 h

Dimensions 184 x 43.4 x 19 mm

-50 to +250 °C

21

Switchable measurement range; gas flow pressure andflue draught measurement

Electronic U-tube mano-meter

Inspects flow/return temperature

Data is sent to PC ornotebook via attachableinterface (optional)

Monitor temperature – Long-term and uninterrupted

Pressure measurement – Practical, efficient and reliable

The 175-T3 temperature data log-ger logs temperature at 2 differentpoints simultaneously over aperiod of several days, weeks oreven months. In this way you can,for example, check the tempera-ture spread between the flow andreturn of a heating system over alonger period of time.

testo 175-T3• Temperature logging with up to

16000 readings

• Alarm display when userdefined maximum/minimum val-ues have been exceeded

• Software for data analysis andparameterisation (optional)

The mini differential pressuremeter is ideally suitable for allpressure measurements whenadjusting heating boilers. Itswitches over the measurementrange automatically. It measuresthe flue gas draught or the differ-ential pressure of the combustionchamber compared to the envi-ronment with the very high accu-racy level of the lower measure-ment range, all other pressureswith the upper measurementrange. One-touch operation. Themagnet in the rear wall of thehousing and the suspension loopfacilitate easy attachment. Yourhands are then left free for adjust-ment work.

testo 506• Automatic measurement range

switchover 10 / 200 hPa/mbar

• 5 switchable units: hPa/mbar,mmH2O, mmHg, inH2O, psi

• Magnet holder and suspensionloop

• Soft rubber casing protectsagainst impact

• 4/6 mm hose connections

Part no. 0563 1756

2 channel temperature data logger,wall holder and calibration protocol

testo 175-T3

Part no. 0560 5063

0 to 10/200 hPa/mbar

Differential pressure meter, incl. con-nection hoses and battery

testo 506

Technical data

Meas. range

Battery life 150 h

0 to +10 hPa


Weight 55 g

+10 to +200 hPa


Analysissoftware

MS Windows 95b /98 / ME / NT4-Sp4 /2000 / XP

Datamemory

16000 readings


Weight 90 g

* At a measuring cycle of 15 min (-10 to +50°C)

Measuring rate 10 s to 24 h

Battery life > 2.5 years*-50 to +1000 °C


testo 575 fast printer, incl. 1 roll of thermal paper and batteries 0554 1775

Lock for wall holder for testo 175/177 data loggers 0554 1755

ComSoft 3 - Basic Set with RS 232 interface for testo 175 0554 1759

Spare thermal paper for printer (6 rolls), Measurement datadocumentation legible for up to 10 years 0554 0568

Part no.


Pipe wrap probe for pipe diameter 5 to 65 mm, with exchange-able measuring head. Measuring range short-term to +280°C 0602 4592

Part no.


Connection hose, silicone, 5m long , Max. load 700hPa (mbar)

0554 0440

Pressure connection hose, single, diameter: 4/6 mm,50 cm long, without connection adapter

0554 0449

Pressure set with flue draught probe, includes 2 x sili-cone hoses each with Ø 4mm and Ø6mm, 4mm and6mm T-piece, connecting piece

0554 3150

Part no.

Technical data

22

Differential pressure measurement on heating units

215 mm

Ø 5 mm

Printout

With alarm function

Pressure measurement for gas and water installation

The testo 312-2 and 3 manome-ters are DVGW approved andcorrespond to TRGI for all pres-sure adjustments and pressureinspections on gas heating boil-ers. Use the testo 312-2 preci-sion manometer to check fluegas draught, differential pressurein the combustion chamber com-pared with ambient pressure orgas flow pressure with high reso-lution. Fine pressures with a reso-lution of 0.01 hPa can be meas-ured in the range from 0 to 40hPa. The versatile testo 312-3pressure meter facilitates fast andefficient preliminary and maintests on gas and water pipelinesup to 6000 hPa (6 bar).

testo 312-2/-3• Switchable mesuring ranges,

ideal resolution

• Compensation of temperaturecontrolled reading deviations

• Alarm display when userdefined limit values areexceeded

• Clear display with time

0632 0314

Precision manometer up to 40/200hPa, DVGW approval, incl. alarm dis-play, battery and calibration protocol

testo 312-3

Up to 40/200 hPaVersatile pressure meter up to300/6000 hPa, DVGW approval, incl.alarm display, battery and calibrationprotocol

Up to 300/600 hPa

testo 312-2

TopSafe (protection case), with bench stand, Protects instru-ment from dirt and impact

Magnetic bench stand suitable for TopSafe 0516 0443, Forpositioning on boilers, for example

0516 0443

Pressure set with flue draught probe, includes 2 x sili-cone hoses each with Ø 4mm and Ø6mm, 4mm and6mm T-piece, connecting piece

0554 3150

0554 0407

Case, For secure storage of measuring instrument 0516 0191

Transport case (plastic), For transport and secure storage ofmeasuring instrument and accessories 0516 3120

9V rechargeable battery for instrument, Instead of battery 0515 0025

Recharger for 9V rechargeable battery, For external rechargingof 0515 0025 battery 0554 0025

Testo printer with 1 roll of thermal paper and 4 AA sizebatteries, Prints readings on site 0554 0545

Recharger for printer (with 4 standard rech. batteries),Rechargeable batteries are recharged externally 0554 0110


Spare thermal paper for printer (6 rolls), Measurement datadocumentation legible for up to 10 years 0554 0568

Pressure transmitter 1-1000 mbar to measure pressure in filledwater pipelines 0554 3168

Pressure transmitter 1-6 bar to measure pressure in filled waterpipelines 0554 3159

Connection hose for pressure transmitter to system (1 off) 0554 3170

Part no.

Part no.

Suitable probes at a glance Part no.

Part no.

0632 0313

Printers and Accessories



Technical data testo 312-2

Meas. range -40 to +40 hPa -200 to +200 hPa

Resolution

Overload

0.01 hPa

±1000 hPa ±1000 hPa

0.1 hPa

Accuracy ±1.5% of mv (+3 to +40hPa)±0.03 hPa (0 to +3 hPa)

±0.5 hPa (0 to +50 hPa)±2 hPa (+50 to +200 hPa)±1 digit

Technical data testo 312-3

Meas. range -300 to +300 hPa -6000 to +6000 hPa

Common data testo 312-2/-3

Dimensions

Weight

215 x 68 x 47 mm

300 g

Resolution

Overload

0.1 hPa

±8000 hPa ±8000 hPa

1 hPa

Accuracy ±0.5 hPa (0 to +50 hPa)±1.5 hPa (+50 to +300 hPa)

±2% of mv (+400 to +2000hPa)±4% of mv (+2000 to+6000 hPa)±4 hPa (0 to +400 hPa)

±1 digit

Part no.Part no.

23

Pressure test on water pipes (3-5 bar test pressure)

Display with reading

Printout with date

Complete test systems for gas/water fitters

Assurance when purchasing“Often, interested customers do not expect a visit from me fol-lowing consultation by telephone. If a customer gets to see the instrument itgives him maximum assurance when making the decision to buy.”

Uwe BeckerHead of Customer Center, Southwest Germany

Everything you need to inspectgas and water pipeline installa-tions: Check pressure drop usingthe testo 312-3 electronic pres-sure meter. The measurementresults are output on the printer.Using the slide rule, you canquickly determine the amount ofgas leaking and thus the service-ability of the gas pipelines. A gasleak is quickly detected by testo316-1.

Testing system set • Pre and main test on gas

pipelines

• Pressure check on waterpipelines

• Fast detection of amount ofleaking gas

• Efficient leak detection


Pressure drop test set 200 mbar, incl. manual bulb pump,hoses, T-fitting with valve, conical test stopper 1/2"

0554 3153

High pressure test pump (for test pressures greater than 500mbar)

0554 3157

Single-pipe counter cap, connects test fittings to pipe, Simplydismantle gas counter, attach single-pipe counter cap and con-nect hose

0554 3156

Two-valve branch (brass) to connect 2 or more pipes, can beblocked off separately

0554 3161

Single-valve stop to block off pipe, e.g. when changing hosesduring a test

0554 3162

LW 6 connection hose, To connect T-fitting/single-pipe countercap or for extension purposes

0554 3158

Conical test plug 1/2" to connect test fittings to gas pipe,Connects test fittings to pipe

0554 3151

Conical test plug 3/4" to connect test fittings to gas pipe,Connects test fittings to pipe

0554 3155

Conical test stop 1" to connect test fittings to gas pipe,Connects test fittings to pipe

0554 3152

High pressure stage stop 3/8" and 3/4", To connect test fittingsto gas pipe

0554 3163

High pressure stage stop 1/2" and 1", To connect test fittings togas pipe

0554 3164

Leak detection spray, To detect leaks (bubbles appear) in gaspipes

0554 3166

System case for the complete test system, Ensures orderly sto-rage of case contents

0554 3165

Slide rule to quickly determine serviceability 0554 3169

DKD calibration certificate/Pressure, Differential and positivepressure; 6 measuring points distributed over meas. range (>0.6% of full-scale value)

0520 0225

Part no.

High pressure set with case (without instrument)

Pressure drop test set, 200 mbar

Testing pump, greater than 500 mbar

Single-pipe counter cap

Two-valve T-fitting

Single-valve barrier

Connection hose LW

Conical test plugs 1/2" and 3/4"

High pressure stage stop 3/8", 1/2",3/4", and 1"

Leak detection spray

System case

Please order the testo 312-3 or testo 312-2 instrument suitable for yourrequirements (see opposite page)

Part no. 0554 3160

Testing system set

testo 312-3 pressure meter

TopSafe for testo 312

Printer

testo 316-1 gas leak detector

TopSafe for testo 316-1

Accessories: Tightness set 200mbar, testing pump, single-pipecounter cap, two valve T-fitting, sin-gle valve barrier, connection hose

LW 6, conical test plugs 1/2", 3/4",high pressure stage stops 3/8",3/4", 1/2", 1", leak detection spray,slide rule, system case

Part no. 0563 0314

24

Compact wood/material moisture meter

The compact testo 606 moisturemeter is very user-friendly. Simplyremove protective cap, placemeasuring electrodes in thebuilding material - finished:

- Wood moisture measurement

- Measurements on buildingmaterials e.g. plaster, flooring...

• Moisture scale (6 to 44%) forwood and building material

• Protection cap with clip - testo606 is always ready to hand

• Automatic instrument and bat-tery test

Fast and easy measurement of material moisturePart no. 0560 6061

Inspecting a hard to reach point in a heating system

Halogen illumination

With mirror

Fiberscopes – For fast diagnosis

914 mm long, Ø 10 mm

testo 318-1

Service Warranty

Authentic quality: one of Testo´s major claims. Warranties of upto 3 years are proof of our lasting quality - this thoroughness has made us one ofthe leading manufacturers in the world.

Jörg WittemerHead of Customer Service

The fiberoptic testing tools fromthe testo 318 series provide youwith a clear picture of difficult-to-access points. Dark areas are illu-minated by the built-in halogenlight and the high powered lensfocuses on objects as close as19 mm (3/4”). The lens and probeshaft can be immersed in liquidswithout worry.

testo 318• Thin flexible probe shaft

• Easy one-hand operation

• Clip-on 45° mirror (optional)

• For inspections in seconds

Part no. 0632 0318


testo 318-2

Part no. 0632 0319

Technical data testo 318-1/-2 S

Number of imagepoints (fibres)

40°

6,000

testo 318-1/-2/-6

40°

Min. focussing distance

Viewing field

19 mm 19 mm

Probe diameter 6 mm 10 mm

Max. bending radius 203 mm 203 mm

Light source Halogen lamp (3220 K) Halogen lamp (3220 K)

6,000

Fiberscope, probe: 914 mm long/Ø 10mm, halogen light, batteries

Fiberscope, probe: 457 mm long/Ø 10mm, halogen lamp, batteries


testo 318-1 S

Part no. 0632 3181


testo 318-2 S

Part no. 0632 3182

Fiberscope, probe: 914 mm long/Ø 6mm, halogen light and batteries

Fiberscope, probe: 457 mm long/Ø 6mm, halogen lamp and batteries


Spare halogen lamp, Extremely powerful for optimum illumina-tion, even in dark areas

0213 0017

Clip on 45° mirror, Ø 10 mm, For inspections at hard to accesspoints

0554 1320

Attachable clip incl. magnet, Ø 10 mm, e.g. for quickly gathe-ring small, loose metal parts in ducts, shafts etc.

0554 1321

Attachable clip incl. magnet, Ø 6 mm e.g. for fast collection ofsmall, loose metal parts in ducts, shafts etc. 0554 1324

Clip on 45° mirror, Ø 6 mm, For visual inspections at hard-to-access points

0554 1325

Part no.


testo 318-6

Part no. 0563 3186

Complete 318-6 Kit consisting of fiberscope, probe: 1830 mm long/Ø 10 mm,halogen lamp, clip-on 45° mirror, attachable clip with magnet, spare lamp, batte-ries and hard shell case

25

Establishes if flue gases have been drawn off comple-tely from the burner

Flue gas spillage detector

Detector for leaks in natural gas pipes

The testo 316-1 gas leak detectorquickly detects even the smallestleaks.

testo 316-1

• Bendable measurement probefor inaccessible pipes

• Optical and audible alarm if limitvalue is exceeded

• TopSafe case protects from dirtand impact (optional)


TopSafe (protection case) with bench stand, Protects instru-ment from dirt and impact

0516 0189

Case for instrument and probes, For safe and orderly storage 0516 0182

Transport case (plastic), For transport and secure storage ofmeasuring instrument and accessories

0516 3120

Accessories set (for instrument without TopSafe) includes multi-function clip, carrier loop, probe holder

0554 0550

Part no.

Part no. 0632 0316

Electronic gas leak detector with flexi-ble probe, battery included

testo 316-1

Technical data

Meas. range 0 to 10000 ppm CH4

1st alarm limit From 200 ppm CH4

2nd alarm limit 10000 ppm CH4

Battery life 5 h

Dimensions 190 x 57 42 mm

The testo 317-1 spillage detectorefficiently locates escaping heat-ing flue gases. The practicalinstrument immediately gives offan optical and acoustic alarmmaking a visual inspection unnec-essary. The bendable probemakes it ideal for use at hard-to-access points.

testo 317-1 • Reliable detection of leaking flue

gases

• Bendable measurement probefor inaccessible points

• Audible and visual alarm

Part no. 0632 3170

Spillage detector with flexible probe,incl. battery

testo 317-1

Technical data

Reaction time

Length of probe pipe 200 mm

Diameter/Probe pipe tip Ø 10 mm


Weight 300 g

2 s

Checks for leaks in domestic gas pipes

TopSafe case protectsfrom dirt and impact(optional)

26

Part no.

Calibration Certificates Part no.

Safe CO level check

With printout

CO zeroing in contamina-ted room

CO warning measurement – For your safety

Use testo 315-2 to check the COlevel in ambient air. Even low con-centrations of the highly poison-ous gas are detected. In this way,you can judge whether theburner flue gases are being fullydrawn off.

testo 315-2 • Reliable CO warning

• Adjustable alarm limits


• Automatic zero point adjust-ment

• Data printout on site (optional)


Part no. 0632 0317

CO warning instrument, with batteryand calibration protocol

testo 315-2

CO flue gas probe to measure CO in flue gas, with exchangea-ble NOx filter and pressure reducer

0554 3154


Recharger for 9V rechargeable battery, For external rechargingof 0515 0025 battery

0554 0025


0516 0443


0554 0407

Multi-function clip (for instrument with TopSafe) consisting ofmulti-function clip and magnetic holder

0554 0398

Spare particle filter (10 off), For CO flue gas probe 0554 0040

Filter granulates (refill set) to renew NOX filter in CO flue gasprobe

0554 3167

Testo printer with 1 roll of thermal paper and 4 AA sizebatteries, Prints readings on site

0554 0545

Recharger for printer (with 4 standard rech. batteries),Rechargeable batteries are recharged externally

0554 0110


Spare thermal paper for printer (6 rolls), Measurement datadocumentation legible for up to 10 years

0554 0568

Case, For secure storage of measuring instrument 0516 0191


0516 3120

ISO calibration certificate/Flue gas , Calibration points 2.5% O2;100 and 1000 ppm CO; 800 ppm NO; 80 ppm NO2; 1000ppm SO2

0520 0003

ISO calibration certificate/CO, CO probes; calibration points 0;80 ppm

0520 0039

Part no.

Part no.

Technical data

Meas. range

Alarm limits 50/100/500 ppm

50/100/500 ppm

Accuracy ±10 ppm CO (0 to +100 ppm CO)±10% of mv (+100 to +2000 ppm CO)

Resolution 1 ppm CO

Zero point adjustment Automatically when switched on


Weight 400 g

0 to +2000 ppm CO


Printers and Accessories


27

Checks gas flow pressure

Parallel CO alarm

395 mm

215 mm

Ø 5 mm

Versatile CO measurement – For safety and service

The testo 315-1 provides youwith all the measurement func-tions needed to service gas heat-ing systems. While measuringdraught, pressure difference,temperature or ionisation current,the instrument can also simulta-neously show the CO level in theambient air. In this way, youalways have the system´s safetyunder your watchful eye.

testo 315-1 • Efficient CO warning

• Three alarm limits are user-defined


• Automatic zero point adjust-ment

• Two temperature inputs to com-pare the flow and return tem-perature

• Compensation of temperature-related reading deviations


Part no. 0632 0315

CO warning and servicing instrumentfor gas heating systems with batteryand calibration protocol

testo 315-1



Recharger for 9V rechargeable battery, For external rechargingof 0515 0025 battery

0554 0025


0516 0443


0554 0407

Testo printer with 1 roll of thermal paper and 4 AA sizebatteries, Prints readings on site

0554 0545


0516 3120

Part no.


CO flue gas probe to measure CO in flue gas, withexchangeable NOx filter and pressure reducer

0554 3154

Cables for measuring ionisation current (2 off) incl.clamp testing tips, cable 1 m long

0554 0551

Pipe wrap probe with Velcro strip, for temperaturemeasurement on pipes with diameter up to max.120 mm, Tmax +120°C

0628 0020

Pressure set with flue draught probe, includes 2 xsilicone hoses each with Ø 4mm and Ø6mm, 4mmand 6mm T-piece, connecting piece

0554 3150

Part no.

Technical data

Accuracy ±10% of mv(+100 to +2000ppm CO)±10 ppm CO (0to +100 ppmCO)

±0.5 hPa (-49.9 to +49.9hPa)±1.5 hPa (-200to -50 hPa)±1.5 hPa (+50to +200 hPa)

±1.5% of mv (-40 to -3 hPa)±1.5% of mv(+3 to +40hPa)±0.03 hPa (-2.99 to +2.99hPa)

±0.5% of mv(+100 to +600°C)±0.5 °C (0 to+99 °C)

Resolution 0.01 hPa (-40to +40 hPa)

0.1 °C (-40 to+600 °C)

0.1 hPa (-200to +200 hPa)

Battery type 9V block battery

Battery life 16 h

Oper. temp. +5 to +45 °C

Material/Housing ABS

Display LCD, 2 lines

Storage temp. -20 to +50 °C

215 x 68 x 47 mm

400 g

Dimensions

Weight

Meas. range 0 to +2000ppm CO

-200 to +200hPa

-40 to +40 hPa -40 to +600 °C

±1 digit

-100 to+100 µA

±3 µA (-100to +100 µA)

1 µA (-100 to+100 µA)

1 ppm CO (0to +2000 ppmCO)

28

Additional documentation isavailable on Heating, AirConditioning and Ventilation:

Total Testo Commitment

Electronic ManifoldsMeasurement Engineeringfor AC and Ventilation

Complete Reference Measure-ment for Heating Units

Practical HandbookHeating Measurement

Sub

ject

to c

hang

e w

ithou

t not

ice

measurement engineering for heating and installation and heating... · 2006-06-13 · flue gas...

Documents