mb group
DESCRIPTION
Bitumen IndustryTRANSCRIPT
![Page 1: Mb Group](https://reader034.vdocuments.us/reader034/viewer/2022042513/568c50f61a28ab4916b0b94d/html5/thumbnails/1.jpg)
Bulevardi “Zog I” , Tirana Business Center , 7 floor. Tirana – ALBANIA; www.mbgroup‐eu.com Tel: +355 4 22 74 500; Fax : +355 4 22 24 279; E‐mail : info@mbgroup‐eu.com
PRESENTATION
MB Group is an international company operating on the Balkan area on the domain of bituminous
materials, responsible for developing, manufacturing and marketing of Selenizza natural bitumen.
We are strongly committed to customer service, added value and business excellence.
Our product, Selenizza SLN is compatible with all bitumen and used to increase performance of
manufacturing of asphalt. Based on the thorough selection, is manufactured under strict control quality
system which guaranties compliance with national and European specifications.
Selenizza production capacity, strategic geographical location and efficient logistics are the best supply
guarantee for our customers.
Selenizza, the perfect natural additive to improve your asphalt business!
![Page 2: Mb Group](https://reader034.vdocuments.us/reader034/viewer/2022042513/568c50f61a28ab4916b0b94d/html5/thumbnails/2.jpg)
PackingQuality
Reference work sites in France
Transport
Selenice Bitumi Sha STAMP OF TRADER
Po box 4326Vlore, AlbaniaFax : +355 422 59 [email protected]
Plateforme portuaire - Martinique (France)
Route départementale - Indre et Loire (France)
Trottoir s - Piazza G. Mazzini (Rome)
rtOuvrage d’a - E70 (Italie)
Pont Valle Verzasca (Suisse)
Aeroport Martinique FWI
Voie Bus Chartres (France)
Selenizza SLN
THE PERFECT ADITIVE TOIMPROVE YOUR ASPHALT MIXES
Plateforme logistique – Lyon (France)
Since 2001, Selenice Bitumi Sha extracts, treats,
manufactures and distributes natural asphaltite.
Selenizza SLN® is an additive used among others,
for manufacturing high performance bituminous materials.
This additive is entirely natural and is only subject to hot
purification process aimed to reduce its sterile rate.
Our Laboratory performes systematic checks on the quality for each output. A certificate of analysis is delivered for every production
We offer the possibility to deliver the product to the final customer by truck, container, bulk cargo, etc.
Selenizza SLN 120® is packaged in different forms, such as hexagonal blocs of 12 kg, pellets of 4-12 mm, or powder
0-5mm, treated with an anti-caking agent.
The product is delivered in big bags, orin thermal fusible polyethylene bags.
Tailor-made weighted bags could be
manufactured for packaging, on customer request, depending on the total order
amount
Studies and evaluations of a new product (in pellets), obtained by mixing Selenizza
SLN with polymer SBS bitumen,are underway and will be soon proposed
to our customers
MartinikeContainers platform (Harbor of Pointe des Grives) – EME dhe BBME (120 kt)
Bourgneuf-Aiton :Truck to train platform
EME (20 kt)
Indre et LoireRegion network - BBME (20 kt)
Corrèze Region network – Highly performing
High Modulus BB (80 kt)
Le HavreHarbor platform Havre 2000
EME and BBME (120kt)
ToulouseBus parking – BBME – (15 kt)
St NazaireHarbor platform – BBME (40 kt)
LyonLogistic platform – EME (12 kt)
DunkerqueHarbor Containers platform
EME BBME (40 kt)
Brive la Gaillarde Regional road network RD1020 Brive bypass
EHP dhe BBHR (55 kt)
MoulinsRestructuring of 2x2 lanes national road RN 79
EME (25kt)
![Page 3: Mb Group](https://reader034.vdocuments.us/reader034/viewer/2022042513/568c50f61a28ab4916b0b94d/html5/thumbnails/3.jpg)
>18 000 MPa
Asphalt with SELENIZZA ®
>19 000 MPa
MONEY SAVING BY USING SELENIZZA
IMPROVING CHARACTERISTICS TO OBTAIN THICKNESS REDUCTION OF THE PAVEMENT LAYERS
IMPROVING THE RESISTANCETO TRAFFIC CONSTRAINTS
SELENIZZA THE RIGHT SOLUTION
RUTTING PUNCHING
Using only 0, 8%of SELENIZZA®
after 30 000 cycles
Without the use of SELENIZZA®after 30 000 cycles
With SELENIZZAWithout SELENIZZA
SPECIFICATIONS
Penetration @ 25°C (pen 10 cm) EN 1426 0
120
> 3,0
3.5
1,16
EN 1427
NFT 66 013
NFT 66 004
-
Softening point (R&B °C)
Penetration Index (IP)
Acidity Index (mg KOH/g)
Density @ 25°C (g/cm3)
P EN 22592 296Asphaltene content (wt %)
Mass loss @ 163°C, 5 hours (%)
TOTAL BINDER MODIFICATION
40 45 50 55 60 65 70 75 80R&B(°C)
100
10
Pee
ntra
tion
(25°
C)
Base bitumen 35/50
Base bitumen 50/70
Grade 50/70
Grade 35/50
Grade 20/30
Grade 10/20
0% SLN 120
Penetration versus softening point R&B (°C)
The addition of Selenizza SLN deeply modifies the rheology of the original binder.
Depending on the added quantity of Selenizza, and on the base bitumen as well, it is possible to obtain precise penetration and/or R&B values of the resulting binder.The important rate of asphaltenes composing Selenizza, will contribute to harden the base binder, without modifying the elastic properties of the reconstituted binder.
Selenizza is entirely diluted in the base bitumen. The resulting high performance asphalt mixes thus obtained are homogenous and easy to implement.
The increasing of the modulus of rigidity and the resistance to the permanent deformation, by adding Selenizza in the bitumen binder, enhance the rutting resistance and leading to higher longevities of the pavements.
6 cmBBME
10 cmEME
PF3
9 cmEME
30 cm
25 cm
Modulus > 5 400 MPa
5 cmBBSG
12 cmGB
13 cmGB
PF3
Basic structure
Alternative proposed
Modulus Modulus
Modulus
> 9 000 MPa
Modulus> 14 000 MPa
Standards of«Asphalts»
The additive Selenizza is compatible with all bitumen and its asphaltene content, which is superior to 50%, confers to the asphalt mixes exceptional rheological and mechanical properties. It may be introduced and blended directly in the hot bitumen tanks, but usually, it is included during the asphalt mixing process (in the intermittent batch mixer for the discontinuous asphalt plants, or in the recycling drum for the continuous plants)
Economize bitumen binder up to
-17%0% SLN 120
10% SLN 120
20% SLN 120
30% SLN 120
10% SLN 120
20% SLN 120
30% SLN 120
Softening point measurement, indicating the difference between 50/70 grade bitumen and the same 50/70 grade bitumen, blended with
15% SELENIZZA SLN 120
Modulus> 9 300 MPa
> 50
0.08
-2
![Page 4: Mb Group](https://reader034.vdocuments.us/reader034/viewer/2022042513/568c50f61a28ab4916b0b94d/html5/thumbnails/4.jpg)
>18 000 MPa
Asphalt with SELENIZZA ®
>19 000 MPa
MONEY SAVING BY USING SELENIZZA
IMPROVING CHARACTERISTICS TO OBTAIN THICKNESS REDUCTION OF THE PAVEMENT LAYERS
IMPROVING THE RESISTANCETO TRAFFIC CONSTRAINTS
SELENIZZA THE RIGHT SOLUTION
RUTTING PUNCHING
Using only 0, 8%of SELENIZZA®
after 30 000 cycles
Without the use of SELENIZZA®after 30 000 cycles
With SELENIZZAWithout SELENIZZA
SPECIFICATIONS
Penetration @ 25°C (pen 10 cm) EN 1426 0
120
> 3,0
3.5
1,16
EN 1427
NFT 66 013
NFT 66 004
-
Softening point (R&B °C)
Penetration Index (IP)
Acidity Index (mg KOH/g)
Density @ 25°C (g/cm3)
P EN 22592 296Asphaltene content (wt %)
Mass loss @ 163°C, 5 hours (%)
TOTAL BINDER MODIFICATION
40 45 50 55 60 65 70 75 80R&B(°C)
100
10
Pee
ntra
tion
(25°
C)
Base bitumen 35/50
Base bitumen 50/70
Grade 50/70
Grade 35/50
Grade 20/30
Grade 10/20
0% SLN 120
Penetration versus softening point R&B (°C)
The addition of Selenizza SLN deeply modifies the rheology of the original binder.
Depending on the added quantity of Selenizza, and on the base bitumen as well, it is possible to obtain precise penetration and/or R&B values of the resulting binder.The important rate of asphaltenes composing Selenizza, will contribute to harden the base binder, without modifying the elastic properties of the reconstituted binder.
Selenizza is entirely diluted in the base bitumen. The resulting high performance asphalt mixes thus obtained are homogenous and easy to implement.
The increasing of the modulus of rigidity and the resistance to the permanent deformation, by adding Selenizza in the bitumen binder, enhance the rutting resistance and leading to higher longevities of the pavements.
6 cmBBME
10 cmEME
PF3
9 cmEME
30 cm
25 cm
Modulus > 5 400 MPa
5 cmBBSG
12 cmGB
13 cmGB
PF3
Basic structure
Alternative proposed
Modulus Modulus
Modulus
> 9 000 MPa
Modulus> 14 000 MPa
Standards of«Asphalts»
The additive Selenizza is compatible with all bitumen and its asphaltene content, which is superior to 50%, confers to the asphalt mixes exceptional rheological and mechanical properties. It may be introduced and blended directly in the hot bitumen tanks, but usually, it is included during the asphalt mixing process (in the intermittent batch mixer for the discontinuous asphalt plants, or in the recycling drum for the continuous plants)
Economize bitumen binder up to
-17%0% SLN 120
10% SLN 120
20% SLN 120
30% SLN 120
10% SLN 120
20% SLN 120
30% SLN 120
Softening point measurement, indicating the difference between 50/70 grade bitumen and the same 50/70 grade bitumen, blended with
15% SELENIZZA SLN 120
Modulus> 9 300 MPa
> 50
0.08
-2
![Page 5: Mb Group](https://reader034.vdocuments.us/reader034/viewer/2022042513/568c50f61a28ab4916b0b94d/html5/thumbnails/5.jpg)
PackingQuality
Reference work sites in France
Transport
Plat eforme po rtuaire - Mar tinique (F rance )
Rout e dépa rtementale - Indre et Loire (F rance)
Trottoir s - Piazza G. Mazzini (Rome )
rtOuvrage d’a - E70 (It alie)
Pont Valle Verzasca (Suisse )
Aeroport Martinique FW I
Voie Bus Chartres (France )
Plateforme logistique – L yon (France)
Our Laboratory performes systematic checks on the quality for each output. A certi�cate of analysis is delivered for every production
We o�er the possibility to deliver the product to the �nal customer by truck, container, bulk cargo, etc.
Selenizza SLN 120® is packaged in di�erent forms, such as hexagonal blocs of 12 kg, pellets of 4-12 mm, or powder
0-5mm, treated with an anti-caking agent.
The product is delivered in big bags, orin thermal fusible polyethylene bags.
Tailor-made weighted bags could be
manufactured for packaging, on customer request, depending on the total order
amount
Studies and evaluations of a new product (in pellets), obtained by mixing Selenizza
SLN with polymer SBS bitumen,are underway and will be soon proposed
to our customers
Martinik eContainers platform (Harbor of Pointe des Grives) – EME dhe BBME (120 kt)
Bourgneuf-Aiton :Truck to train platform
EME (20 kt)
Indre et LoireRegion network - BBME (20 kt)
Corrèze Region network – Highly performing
High Modulus BB (80 kt)
Le HavreHarbor platform Havre 2000
EME and BBME (120kt)
ToulouseBus parking – BBME – (15 kt)
St NazaireHarbor platform – BBME (40 kt)
LyonLogistic platform – EME (12 kt)
DunkerqueHarbor Containers platform
EME BBME (40 kt)
Brive la Gaillarde Regional road network RD1020 Brive bypass
EHP dhe BBHR (55 kt)
Moulin sRestructuring of 2x2 lanes national road RN 79
EME (25kt)