maytag top load washer - richard jay | industrial and commercial … · supplier of commercial and...
TRANSCRIPT
Legendary Maytag DependabilityThe dependable robust top load washer.
1300 RICHARD (742 427)www.richardjay.com.au
Maytag warranty 2 years Parts and 1 year labour.
Energy-Effi cient Cleaning
• Best cleaning available enabled by
PowerWash® Cycle
• Sensor fi ll water levels reduce water
usage
High Speed Performance
• High speed spin of 144 G-Force
reduces dry ti me
Easy to use
• Extra large lid and tub opening
• Time remaining display
Most energy effi cient top load washer
MaytagTop Load Washer
MaytagMVW18MN
CYLINDERDrum Volume l 82
Diameter mm 528
Depth mm 605
Capacity kg 8
DIMENSIONSHeight mm 1036
Width mm 686
Depth mm 658
Lid Opening mm 432
Weight (net / gross) kg 55 / 63
SPEEDWash RPM
Extract (high force) RPM 700
G-force G 144
ENERGYElectric Power Consumpti on HP (W) 0.33 (250)
Total Energy per Cycle Kwh
WATER USAGEAvg. Total Water Usage / Cycle l 56.6
Avg. Hot Water Usage / Cycle l 16.7
Avg. Cold Water Usage / Cycle l 39.9
Operati onal Water Pressure psi 20-100
NOISE & CYCLE TIMENoise Level dB
Default Programme Durati on min
EXTERNAL FINISHDrum
Top Plate Porcelain-enamel
CIRCUIT PROTECTIONMain Control Board Fuse amps 10 (220-240V / 50Hz)
HOSEInlet Hose mm 1800
Drain Hose mm 1300
Maytag CommercialTop Load WasherMVW18MN Richard Jay is
Australia’s largest and most respected
supplier of Commercial and Industrial laundry
solutions
Supplying Maytag for over 30 years, Richard Jay is the
Maytag expert
1300 RICHARD (742 427)www.richardjay.com.au
3A/196 Power Street, Glendenning4/19 Success Street, Acacia Ridge76 Pym Street, Dudley Park31/640-680 Princes Highway, Brooklyn U1/25 Trade Road, Malaga
NSW & ACTQLDSA & NTVIC & TASWA
PRODUCT INSTALLATION SPECIFICATIONS
MODEL MVW18MN
CAPACITY - kgs 8
HEIGHT – mms 1073
WIDTH – mms 686
DEPTH – mms *including hoses fitted
699
APPROX. WEIGHT – kgs 55
WATER INLETS – inches 1 x Hot & 1 x Cold connection – Male threaded taps required.
3/4
WATER PRESSURE required – psi 20 - 100
DRAIN PIPE DIAMETER recommended – mm
Drain hose O.D. is 27mm
Flow Rate – Lts/min
51
- Needs 990 - 1100mmhigh standpipe
38 POWER CONNECTION
3-pin GPO required.
1 phase, 240v, 10amp GPO
CIRCUIT PROTECTION AMPS 16
WATER CONSUMPTION – Approx. Litres. 57
Established 1969www.richardjay.com.au 1300 RICHARD (742 427)
WA VIC & TAS SA & NT NSW & ACT QLD
* Customer supplied services must be located within 1 metre of each service connectionpoint on machine for standard fittings to reach. See machine drawing for locations.
This work is protected by copyright. Reproduction in whole or in part, in 2 or 3 dimensions is expressly forbidden except with the prior written permission of the copyright owner. © Richard Jay Laundry Equipment Pty Ltd.