may 2015 fdt group update -...
TRANSCRIPT
May 2015
FDT Group
Update
Glenn B. Schulz
Managing Director
Copyright 2015 by the FDT Group AISBL.
All rights reserved
29/06/20153
Contents FDT Group Intro
DTM Certifications
Cyber Security
OPC and Industry 4.0
Mobility
FDT GROUP INTRO
29/06/2015
FDT Group is an international, non-profit organization (AISBL)
o Incorporated in March 2006
History of more than 5 year prior
o Funded by membership dues
More than 90 members world-wide
More than 100 active volunteers
Headquartered in Jodoigne, Belgium
Purpose
o Technically advance the FDT standard
o Drive adoption of FDT standard by international standards
bodies
IEC 62453
ISA / ANSI 103
China GB/T
o Raise awareness of the FDT standard with end users and
vendors
FDT Group Introduction
DTM CERTIFICATIONS
29/06/2015
Independent labs carry out the test procedures
o FDT office audits the labs
FDT Office issues device certificates upon passing the tests
Visit www.fdtgroup.org for a list of DTMs
DTM Certification Trends
0
2500
5000
7500
10000
20
05
20
06
20
07
20
08
20
09
20
10
20
11
20
12
20
13
20
14
20
15
Devices Supportedby Certified DTMs
0100200300400500600
20
05
20
06
20
07
20
08
20
09
20
10
20
11
20
12
20
13
20
14
20
15
DTM Certificates Issued
* as of 30 April 2015
CYBERSECURITY
29/06/2015
A new cyber security infrastructure has been established
o Threat response
o Security architecture
o Security quality assurance
Independent audit of the FDT standards will be complete in Summer
2015
o Will result in best practices documents at a minimum
FDT members should name an cyber security contact
Visit www.fdtgroup.org technical documents for additional
information
FDT Cyber Security
FDTCyber
Security
Security Quality
Assurance
WG
Security Incident
Response
WG
Security
Architecture
WG
OPC AND INDUSTRY 4.0
29/06/2015
Network / devices need to be configured, before they can be used.
This can e.g. be done in a normal engineering tool using the DTMs.
Configured network topology / device type
information can be used to generate basic
part of FDT®2 OPC UA information model
Creation of FDT®2 - OPC UA info model
(1 / 2)
Engineering tool
plan
create
Information provided by the
DTMs can be used to complete
the information model
o Device type information
o Parameter information
o IO information
o Supported DTM functions
Creation of FDT®2 - OPC UA info model (2
/ 2)
Engineering tool
read
create
OPC UA server can use device DTMs to access
data
o Enables access to
all parameters, IOs
o Enables data read
and write
o OPC server doesn’t need
protocol specific handling
OPC UA server as FDT frame application
OPC Server – FDT frame
application
OPC UA Clients
browse
read/write
data
execute
function
Data
access
interface
Concept combines where FDT and OPC fits best
OPC provides uniform interface for many different
client applications
FDT provides network / device configuration and
access to devices
FDT concepts enable unification
of system engineering, configuration &
diagnosis in Industry 4.0
FDT supports Industry 4.0 devices, but is
also able to build a bridge to Industry 3.0
networks and devices
Required FDT extensions are
FDT OPC UA protocol annex specification
FDT / AutomationML data mapping annex specification
Next steps toward Industry 4.0
MOBILITY
29/06/2015
FDT Group is sponsoring
a survey being
conducted to better
understand the market
requirements of using
the FDT standard in a
mobile setting
Respondents > 250
Copyright 2014 FDT Group AISBL. All rights reserved. 16
FDT Mobility Survey - Overview
http://mobilitysurvey.fdtgroup.org
When doing device management with the FDT Standard, how often
do you perform:
o device installation and configuration?
o device monitoring?
o do alarm management and diagnostics?
o do you do calibration and maintenance?
Are there situations or tasks for which a mobile solution for device
management would be useful?
In what context might you work with a mobile solution?
Will you have network connectivity (e.g. 3G/4G/WiFi) in your mobile
application context?
Does your mobile solution need to work in a hazardous
environment?
What tasks might you perform with such a mobile solution?
Would you expect that the mobile application reacts to the proximity
to a machine or device?
Copyright 2014 FDT Group AISBL. All rights reserved. 17
FDT Mobility Study
A smartphone or tablet has many capabilities and sensors that
traditional computers do not have. Which of these could be useful
with mobile device management? If some of these terms are
unknown to you, leave the corresponding check boxes unchecked.
How many Device Type Managers (DTMs) should be included in a
single application on the mobile device?
How important is a reliable synchronization across devices (desktop,
mobile devices) for you?
Do you have concerns regarding the security of a mobile device
management?
Which aspects should determine who has access to certain functions
in the mobile application?
Which mobile devices should be supported by the FDT technology?
Which mobile operating systems should be supported?
Would you expect that you can use your personal mobile device for
device management?
Copyright 2014 FDT Group AISBL. All rights reserved. 18
FDT Mobility Study
CLOSING
29/06/2015
FDT Group Members
