matthew smith, christopher ranc, shabab siddiq leader unit: raspberry pi...
TRANSCRIPT
Cats and other pets are often picky eaters. When owning multiple animals, it’s often especially difficult to ensure that each is able to get its required nutrition without another animal taking its food. ACF Serves as a local IOT devices with multi-feeder expandability that can all be programmed with your own smartphone.
The objective of this project was to design a versatile, expandable feeding system that is inexpensive to produce, allowing owners to have as many feeders as needed to accomodate however many pets they may have.
In order to facilitate rapid development and compatibility of peripherals, the ARM based Raspberry Pi was chosen as the center of this project. The ability to run a full 32-bit Debian Linux operating system allowed for a full backend written in Python using generic libraries and programming practices.
Leader Unit:● Raspberry Pi Zero W● Dual action managed WiFi and access point configuration● full use of GPIO and SPI● Flask HTTP server● MongoDB for storing pet info, configuration settings, and
feed histories ● Multi-threaded application server for monitoring
peripherals and acting on events.
Follower unit:● ESP-12-e● Securely operates on Leader’s access point for easy
configuration.● Micropython server operating similar to Flask for handling
communication between Leader and Follower.● Application server for handling peripherals
Generic components:● Common Python drivers for both Pi and ESP use.● RC522 RFID reader● EasyDriver H-Bridge motor driver
○ Nema 17 64oz.in stepper● TAL220 Load sensor with HX711 driver/amplifier
Android:● User application for adding and managing pets● Communicates to Leader unit via Managed WiFi( i.e., home
network)● Transfers data via JSON over HTTP requests
Physical design● 3D printed auger and gears from thingverse● Laser cut chassis ● PVC T coupling to hold and feed auger
Screenshots from the android app that allows configuration of pet information, feeding times, and
assigning the pet an RFID tag
Main feeder controller test configuration. Combination of
Raspberry pi, Easydriver stepper controller, and an RC522 RFID reader.
Feeder Chassis configured with RFID reader in front of bowl to check which animal is trying to
feed
Supplementary feeder controller test configuration. Combination of ESP
12-E development board, Easydriver stepper motor controller, HX711 ADC for load sensors, and an RC522 RFID
reader.
Objective
Subsystem Diagram
Leader Controller
Android Smartphone App
Feeder Chassis
A.C.F.: Automatic Cat FeederMatthew Smith, Christopher Ranc, Shabab Siddiq
RIT ARM Student Design Contest—Spring 2018

Follower Controller
Technical Details