Product:

1-Wire rope sling:

A-Mechanical Splice Wire Rope Sling:Probably the most common items of lifting gear are wire rope slings. The wire rope slings are either FC or IWRC with different type of terminations according to BS EN 13414:2003"hard eye, Soft eye, spelter socket,”.

They include all types of accessories "thimble, ferrule, links, shackles or hooks" In addition. We can press in range from 3mm up

to 77mm and they are single leg, two legs and up to six legs wire rope sling. They include all types of accessories, links, shackles or hooks".

B- Hand Splice wire rope Sling:

We manufacture hand splice slings according to BS EN13411-2:2001with high quality, within range from 8mm to 38mm diameter.

2-Chain Sling

We manufacture chain slings 1leg, 2legs, 3legs and 4legs using chain and its accessories produced by Crosby, George Taylor, and William Hacket, etc….According to EN818-4, Sizes 7mm to 32mm, large size according to client request.

3- Shackles

Our shackles range from 1/3 ton to 150 ton capacity. They are either safety or screw pin bow shackle. We are also distributors for Crosby & other manufacturers like George tailor (Van Beest Shackles).A-Bolt Type Anchor Shackle

Capacities 1/3 through 150 metric tons, grade 6 Forged — Quenched and Tempered, with alloy pins. Meets the performance requirements of Federal Specification

RR-C-271F Type IVA, Grade A, Class 3 and EN13889 Minimum Ultimate Strength is 6 times the Working Load

Limit.

B-Bolt Type Chain Shackle Capacities 1/3 thru 150 metric tons, grade 6 Forged — Quenched and Tempered, with alloy pins. Meets the Meets the performance requirements of Federal

Specification RR-C-271F Type IVB, Grade A, Class 3 and EN13889

Minimum Ultimate Strength is 6 times the Working Load Limit.

C-Screw Pin Anchor Shackle

Capacities 1/3 through 55 metric tons, grade 6. Forged - Quenched and tempered, with alloy pins. Meet the performance requirements of Federal

Specification RR-C-271F Type IVA, Grade A, Class 2 and EN13889:2003.

Minimum Ultimate Strength is 6 times the Working Load Limit

D-Screw Pin Chain Shackle Capacities 1/3 thru 55 metric tons. Forged - Quenched and Tempered, with alloy pins.

Meet the performance requirements of Federal Specification RR-C-271E Type IVA, Grade A, and EN13889:2003.

Minimum Ultimate Strength is 6 times the Working Load Limit.

E-Alloy Bolt Type Shackle

Quenched and Tempered. Alloy bows, Alloy bolts. Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel

200 thru 400 metric tons. Meets the performance requirements of Federal

Specification RR-C-271E, Type IVA, Grade B, Class 3 and EN13889:2003.

F-Subsea Shackle

Capacities from 6-1/2t through 55t. Forged Steel, Quenched & Tempered, with alloy pins. All ROV shackle bows, unless otherwise noted, are

galvanized, then painted fluorescent yellow. Minimum Ultimate Load is 5 times the Working Load Limit.

4-Hooks:

1-Grab Hook

Forged Alloy Steel - Quenched and Tempered Suitable for use with Grade 100 and Grade 80 chain Slings

per ASME B30.9. Minimum Ultimate Load is 4 times the Working Load Limit.

2-Safety Eye Hook

Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7,and ABS Guide for Certification of Cranes.

Available in carbon steel and alloy steel. Designed with a 5:1 Design Factor for (Carbon Steel); 4:1 Design

Factor for (Alloy Steel).

3-Swivel Safety Hook

Forged - Quenched and Tempered. Type Approval and certification in accordance with ABS 2006 Steel

Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes. Designed with a 5 to 1 safety factor. Alloy swivel hooks 1.25tA-31.5tA

4-Self Locking Eye Hook

Forged Alloy Steel - Quenched and Tempered. Recessed trigger design is flush with the hook body, protecting

the trigger from potential damage. meets the performance requirements of EN1677-3:2001 Minimum Ultimate Load is 4 times the Working Load Limit.

5-Swivel Self Locking Hook

Forged Alloy Steel - Quenched and Tempered Rated for both Wire Rope and use with Grade 80/100 Chain. Ultimate Load is 4 times the Working Load Limit.

6-ROV Eye Hook

Quenched and Tempered. Sizes 3.2 ton through 31.5 ton. Fluorescent yellow finish for high subsea visibility. Ultimate Load is 4 times the Working Load Limit.

7-Sliding Chocker Hook.

Forged Alloy Steel-Quenched and Tempered. Design Factor 5:1 Ultimate Load is 5 times the Working Load Limit. Sizes 1.13 Ton through 6.75 Ton.

8-Sorting Hook.

Forged Alloy Steel-Quenched and Tempered. Deep straight throat permits efficient handling of flat plates or large

cylindrical shapes Design Factor 5:1 Ultimate Load is 4 times the Working Load Limit.

9-Barrel Hook

Forged Carbon Steel - Quenched and Tempered. Meets the performance requirements of Federal Specification RR-

C-271E, Type V, Class 6, Ultimate Load is 4 times the Working Load Limit.

5-Wire Rope Grips

We Supply all different types and sizes of wire rope grips these items are usually galvanized and follow the standards DIN"42, us/fed. Spec/ff-c-450 and Bs462 forged.

U-type ( G450)

Sizes 1/8" through 3 1/2” (3 mm through 90mm) Meets or exceeds all requirements of ASME B30.26

Bundle Clips( G460 )

Entire clip-galvanized to resist corrosive and rusting action. Meets or exceeds all requirements of ASME B30.26

6-Webbing Slings:

We have a wide range of webbing slings is available in various lengths and capacities. We have different lengths for a different capacity with different colors.1- Flat Webbing Slings eye & eye manufactured to EN1492-1, SF 7:1.2- Flat webbing sling twisted eye manufactured to EN1492-1, SF 7:1.3- Round webbing slings manufactured to EN1492-2, SF 7:1.4- Cargo Lashing manufactured to EN12195-2, SF 7:15- Cargo Net

Effective length

7-Personal Protective Equipment:

1- Fall arrest2- Full Body Harness3- Energy Absorbing Lanyard.

And big collection of PPE.

8-Heavy Duty Hand Operated Chain Blocks:

Manufacture according to BS 3243: 1990 Capacity 0.5 ton through 20 ton. Manufacture GT

9-Lever Hoist

Manufacture according to BS 4898:1997 Capacity 0.5 ton through 20 ton. Manufacture GT

10-Snatch Block

Forged alloy heat treated hooks. Forged steel swivel tees, yokes and shackles. Hook and shackle assemblies on 4-1/2” through 14” sizes can be

interchanged. Can be furnished with bronze bushings or roller bearings. Meets or exceeds all requirements of ASME B30.26, BS

4536:1970 Ultimate Load is 4 times the Working Load Limit

11-Forged Swivels

Hot dip Galvanized Quenched & Tempered Meets the performance requirements of Federal Specification RR-

C-271E, Type VII, Class 1

Ultimate Load is 5 times the Working Load Limit. Sizes 6mm to 38mm.

Regular Swivel

Jaw End Swivel

Chain Swivel

This type of Swivels are Suitable for frequent rotation under load.

12-Turnbuckles:

End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.

Hot Dip galvanized steel

Modified UNJ thread on end fittings for improved fatigue properties.

Body has UNC threads. Meets or exceeds all requirements of ASME B30.26 Ultimate Load is 5 times the Working Load Limit

13-Eye Bolts:

Shoulder Type Machinery Eye Bolts Forged Steel - Quenched and Tempered. Furnished with standard Hot Dip galvanized hex nuts. Ultimate Load is 5 times the Working Load Limit S-279 threaded UNC. M-279 metric threaded.

14-Wire Rope Lubricant

Vitalife® products are the preferred wire rope lubricants in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope.

15-Clamps

A-Vertical Clamp Universal - For Lifting in any Direction Available in capacities of .5 thru 30 metric tons (Higher Working

Load Limits are available upon request) Wide variety of jaw openings available: 0 to 155mm. Available in a variety of styles: IPU10 - Standard clamp for materials with a surface hardness to

37Rc (345HB). IPU10J - Larger jaw opening. IPU10S - For use with Stainless Steel material. IPU10H - For use with materials with a surface hardness to 47Rc

(450HB).

IPU10S

B-Horizontal Clamp

For Horizontal Lift and Transfer - with Pretension System

Welded alloy steel body for strength and smaller size. Forged alloy components, where required

Manufactured by a ISO 9001 facility Design Factor based on EN 13155 and ASME B30.20.

IPHNM10 IPH10 IPHTONZ IPHTOZ

IPPE IPBC IPHGUZ

C-Beam Clamp

For the Transfer of Steel Beams and Attachment of Tackle Eye:

Welded alloy steel body for strength and smaller size. Forged alloy components, where required.

Manufactured by a ISO 9001 facility. Design Factor based on EN 13155 and ASME B30.20.

IPTK IPTKW

IPTKU IPSTARTEC11 IPDV

IPVK

D-Pipe Clamp The new Crosby Clamp-Co Adjustable Pipe Grab provides an excellent means of handling cylindrical objects. Featuring padded grabs, the new Grab offers an excellent method of handling any pipe or solid bar, 88.9 mm to 914 mm, especially where damage to material surface is not permitted.

CCPA CCPG

E-Beam Clamp Crosby Clamp-Co Beam Clamps provide an

efficient method for handling wide flange beam sections and plate girders. When lifting, these beam clamps grip the beam at three points, and when properly balanced

and safely guided, the beam can be handled even if the clamp is slightly off center lengthwise.

CCBC CCBG CCGG F-Pipe Hook Crosby Clamp-Co Pipe Hooks provide a fast and efficient method for lifting pipe, tube or any similarly shaped fabrications.

CCPHI CCPH

16-Manufacture all Carg Carrying Units “CCUs” :

A lot of equipments and materials are transported in containers. Large or heavier items are transported in open tops, cargo boxes, Baskets, etc.. these are all classified as “Cargo Carrying Units” in which we design and manufacture.Containers:

BS container

Mini Container Chemical Container

Open Top Container Offshore Container

Baskets:

Cargo Basket Tool Baskets

Personal Basket

Offshore Basket

Pipe Basket

Caravans

Spreader Beams:We manufacture test and certify many different sizes and capabilities of spreader beams; they have data plate, and painted. also they meet or exceed ASME B.30.20 to be used in conjunction now is the new AME BTH-1-2005 design of below the hook lifting device. This provides minimum structural mechanical and electrical component selection criteria for ASME B30.20 below the hook lifting device.

Gas RacksGsa bottle rack allow secure transportation and carriage of oxygen bottles, acetylene tanks or other similar gas bottle/ tanks for offshore. Design and manufacture the units to BS EN 12079 standardFabricated with door and locking device for secure transportation of the gas bottle / tanks. Chain with securing points are provided to ensure the gas bottle are in place during transportation. c/w forklift pocket.

Pad EyesSizes from 1/3 ton to 55 ton capacity, beveled, hole to fit 3/16” to 2 ½” ---G-209/2130 Crosby shackles , proof tested to 2X rated capacity.

Protection Products:

1. Steel Protector:Manufacturing all sizes and types of thread protectors.

2. Plastic Protector:

We produce HDP heavy duty plastic protectors with a special elastomer formulation in which make these protectors act as supper tough protectors. All protectors are closed end. Also we produce LP “light plastic protectors” for one time use and line pipes protectors where all are open end.

3. Lifting Cap protectors. Certified lifting caps to carry and pull pipe etc through lifting cap strong bail.