martin + tschopp - price list 4.1 engt/martin... · * article 102 + 112: 70 mm, article132: 40 mm...
TRANSCRIPT
Cylindrical Gauges
Product Program
and Price List
Edition 4.1 - 201701
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 1
Mart in + Tschopp GmbH
Quality can be measured.
When the merchant Willy Martin and the precision mechanic Fritz Tschopp set up their company together in 1941, they were driven by the vision of manufacturing top quality precision mechanical products in the style of the world famous Swiss clockmakers. The result of this vision is the company Martin + Tschopp GmbH, an internationally renowned full-range supplier of cylindrical gauges and ground shafts. In a unique combination of modern and efficient production procedures coupled with the inherent Swiss quest for perfection, we develop and produce excellent cylindrical gauges and ground shafts “Made in Switzerland” for the world market. The challenge we face in the future is to continue perfecting this art in the spirit of our founders and to the benefit of our customers.
Our services and the added value we offer you are marked by the same level of perfection and precision with which we develop and manufacture our products. Our customer managers are specialists who see their jobs as a vocation and who are happy to advise you comprehensively. We can deliver many of our gauges from stock. In addition to our extensive standard program, we can also supply measuring equipment tailor-made to meet your needs. And if things need to be done quickly, you can take advantage of our express production service. On request, we can also calibrate your high-precision cylindrical gauges in our modern measuring laboratory.
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 2
Product Over view and Contents
The application options for cylindrical gauges are diverse. Despite the growing importance of computer-controlled measuring systems, cylindrical gauges, single-
ended and double-ended plug gauges, and thread measuring wires are still the most accurate, reliable and efficient measuring tools having proven their worth
millions of times over in practice.
Martin + Tschopp cylindrical gauges are available in a diameter range of hair-fine 0.06 mm to approx. 20 mm with a diameter accuracy of up to ± 0.3 μm. We offer
our measuring instruments made from top-quality gauge steel, tungsten carbide or ceramic.
Moreover, we have developed numerous other products – evolving from the simple cylindrical gauges – that make your work much easier on a day-to-day basis.
One excellent example of this are our thread measuring wires with micrometer holders.
Pin Gauges
Pin Gauges with Handle
Pin Gauge Standard Sets and Individual Sets
Single Ended Plug Gauges and Sets, Double Ended Plug Gauges
Thread Measuring Wires and Sets
SCS Calibration Services
Accessories and Packing
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 3
Pin Gauges – To ler ance Class 0 (± 0.3 µm )
According to DIN 2269
Tolerance ± 0.3 μm – more accurate than tolerance class 0 according to DIN 2269
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
Made out of gauge steel, tungsten carbide or ceramic; from Ø 5.01 mm engraving of diameter on cylinder face
For pin gauges according to special customer's specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00 10.00 12.00 14.00 16.00 19.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 9.99 11.99 13.99 15.99 18.99 20.00
Length [mm] 30/40* 60/40**
Type 101 (gauge steel) [CHF] 94.10 68.95 50.05 40.05 36.00 33.45 35.95 41.95 66.55 96.25 127.35 158.30 187.10
Type 111 (tungsten carbide) [CHF] 92.50 85.95 92.40 107.80
Type 131 (ceramic) [CHF] 122.30 120.95 124.45 130.00
* Article 101 + 111: 30 mm, Article 131: 40 mm ** Article 101 + 111: 60 mm, Article131: 40 mm
Pin Gauges – To ler ance Class 1 (± 1.0 µm )
According to DIN 2269
Tolerance ± 1.0 µm
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
Made out of gauge steel, tungsten carbide or ceramic; from Ø 5.01 mm engraving of diameter on cylinder face
For pin gauges according to special customer's specifications please ask for a quotation
* Article 102 + 112: 70 mm, Article132: 40 mm
Pin Gauges – To ler ance Class 2 (± 1.5 µm )
According to DIN 2269
Tolerance ± 1.5 µm – more accurate than tolerance class 2 according to DIN 2269
Step 0.01 mm
Made out of gauge steel or tungsten carbide; from Ø 5.01 mm engraving of diameter on cylinder face
For pin gauges according to special customer's specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00 10.00 12.00 14.00 16.00 19.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 9.99 11.99 13.99 15.99 18.99 20.00
Length [mm] 30 40 70
Type 103 (gauge steel) [CHF] 76.20 54.90 34.15 19.30 10.90 8.40 10.90 14.40 17.35 20.10 25.05 30.45 35.65
Type 113 (tungsten carbide) [CHF] 35.65 27.45 35.65 47.10
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00 10.00 12.00 14.00 16.00 19.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 9.99 11.99 13.99 15.99 18.99 20.00
Length [mm] 30 40 70/40*
Type 102 (gauge steel) [CHF] 82.35 58.80 43.65 29.35 15.15 13.15 14.90 18.20 29.60 36.20 47.90 59.50 67.75
Type 112 (tungsten carbide) [CHF] 46.50 40.35 45.75 55.85
Type 132 (ceramic) [CHF] 110.05 108.85 112.00 116.95
Type 103 w it h extr a s hor t lea d t imes
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 4
Pin Gauges with Handle – To lerance Class 0 (± 0.3 µm )
With plastic handle incl. engraving of diameter
Tolerance ± 0.3 μm – more accurate than tolerance class 0 according to DIN 2269
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
Made out of gauge steel, tungsten carbide or ceramic
For pin gauges according to special customer's specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 10.00
Measuring length [mm] 23 28/33* 57/32**
Type 101.G (gauge steel) [CHF] 103.45 78.30 59.40 45.70 41.65 39.10 50.95 56.95
Type 111.G (tungsten carbide) [CHF] 98.15 91.60 107.40 127.80
Type 131.G (ceramic) [CHF] 127.95 126.60 139.45 150.00
* Article 101.G + 111.G: 28 mm, Article131.G: 33 mm ** Article 101.G + 111.G: 57 mm, Article 131.G: 32 mm
Pin Gauges with Handle – To lerance Class 1 (± 1.0 µm )
With plastic handle incl. engraving of diameter
Tolerance Class ± 1.0 µm
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
Made out of gauge steel, tungsten carbide or ceramic
For pin gauges according to special customer's specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 10.00
Measuring length [mm] 23 33 62/32*
Type 102.G (gauge steel) [CHF] 91.70 68.15 53.00 35.00 20.80 18.80 29.90 33.20
Type 112.G (tungsten carbide) [CHF] 52.15 46.00 60.75 75.85
Type 132.G (ceramic) [CHF] 115.70 114.50 127.00 136.95
* Article 102.G + 112.G: 62 mm, Article 132.G: 32 mm
Pin Gauges with Handle – To lerance Class 2 (± 1.5 µm )
With plastic handle incl. engraving of diameter
Tolerance ± 1.5 µm – more accurate than tolerance class 2 according to DIN 2269
Step 0.01 mm
Made out of gauge steel or tungsten carbide
For pin gauges according to special customer's specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 10.00
Measuring length [mm] 23 33 62
Type 103.G (gauge steel) [CHF] 85.55 64.25 43.50 24.95 16.55 14.05 25.90 29.40
Type 113.G (tungsten carbide) [CHF] 41.30 33.10 50.65 67.10
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 5
Pin Gauge Sets – To lerance C lass 0 (± 0 .3 µm)
Pin gauge sets in high-quality wooden boxes with plastic inserts
Set type 101.3 – pin gauges without plastic handle with engravings on plastic inserts
Set type 101.4 – pin gauges with engraved plastic handle
Tolerance ± 0.3 μm – more accurate than tolerance class 0 according to DIN 2269; further details according to individual gauges
Made out of gauge steel; tungsten carbide and ceramic on request
For pin gauge sets according to special customer’s specifications please ask for a quotation
Diameter from [mm] 0.10 0.50 0.10 1.00
to [mm] 0.50 1.00 1.00 2.00
Step [mm] 0.01 0.01 0.01 0.01 Number of pin gauges [pieces] 41 51 91 101
Type 101.3 (set price) [CHF] 1 777.05 1 827.35 3 336.10 3 000.85
Type 101.4 (set price) [CHF] 2 082.70 2 116.50 3 925.25 3 573.50
Pin Gauge Sets – To lerance C lass 1 (± 1 .0 µm)
Pin gauge sets in high-quality wooden boxes with plastic inserts
Set type 101.3 – pin gauges without plastic handle with engravings on plastic inserts
Set type 101.4 – pin gauges with engraved plastic handle
Tolerance ± 1.0 μm; further details according to individual pin gauges
Made out of gauge steel; tungsten carbide and ceramic on request
For pin gauge sets according to special customer’s specifications please ask for a quotation
Diameter from [mm] 1.00 0.10 0.50 0.10 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00
to [mm] 10.00 0.50 1.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00
Step [mm] 0.10 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Number of pin gauges [pieces] 91 41 51 91 101 101 101 101 101 101 101 101 101
Type 102.3 (set price) [CHF] 1 381.80 1 236.25 703.95 1 759.95 1 159.00 1 159.00 1 399.40 1 399.40 1 399.40 1 708.40 1 708.40 1 708.40 1 708.40
Type 102.4 (set price) [CHF] 2 157.60 1 541.90 993.10 2 349.10 1 731.65 1 741.00 2 914.40 2 914.40 2 914.40 3 223.40 3 223.40 3 223.40 3 223.40
Pin Gauge Sets – To lerance C lass 2 (± 1 .5 µm)
Pin gauge sets in high-quality wooden boxes with plastic inserts
Set type 101.3 – pin gauges without plastic handle with engravings on plastic inserts
Set type 101.4 – pin gauges with engraved plastic handle
Tolerance ± 1.5 μm – more accurate than tolerance class 2 according to DIN 2269; further details according to individual pin gauges
Made out of gauge steel
For pin gauge sets according to special customer’s specifications please ask for a quotation
Diameter from [mm] 1.00 0.10 0.50 0.10 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00
to [mm] 10.00 0.50 1.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00
Step [mm] 0.10 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Number of pin gauges [pieces] 91 41 51 91 101 101 101 101 101 101 101 101 101
Type 103.3 (set price) [CHF] 1 059.75 897.10 624.35 1 347.25 895.45 887.20 1 100.80 1 100.80 1 100.80 1 347.25 1 347.25 1 347.25 1 347.25
Type 103.4 (set price) [CHF] 2 238.15 1 202.75 913.50 1 936.40 1 468.10 1 469.20 2 615.80 2 615.80 2 615.80 2 862.25 2 862.25 2 862.25 2 862.25
Ind iv id ua l sets requ ire d? No pr o ble m f or us , fee l f re e t o a sk !
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 6
Indiv idual Sets
Individually tailored set combinations according to
your requirements at attractive conditions
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 7
Single Ended P lug Gauges – To lerance C lass 0 (± 0.5 µm ) and To ler ance C lass 1 (± 1 .0 µm)
With plastic handle incl. engraving of diameter; an attractive alternative to pin gauges and pin gauges with handle
Made out of gauge steel: tolerance ± 0.5 µm
Out of tungsten carbide and ceramic: tolerance 1.0 µm
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
For single ended plug gauges according to special customer’s specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 10.00
Measuring length [mm] *
Type 201 (gauge steel, tol. 0) [CHF] 22.05 17.40 15.90 10.00 9.65 9.70 12.70 17.35
Type 211 (tungst. carbide, tol. 1) [CHF] 36.00 31.75 41.90 52.35
Type 231 (ceramic, tol. 1) [CHF] 75.20 74.40 82.55 89.00
Single Ended P lug Gauge Sets – To ler ance C lass 0 (± 0.5 µm)
Single ended plug gauge sets in high-quality wooden boxes with plastic inserts
Tolerance ± 0.5 µm; measuring length according to individual single ended plug gauges
Made out of gauge steel; tungsten carbide and ceramic on request
For single ended plug gauges according to special customer’s specifications please ask for a quotation
Diameter from [mm] 0.06 0.51 1.01 1.51 2.01 2.51 3.01 3.51 4.01 4.51
to [mm] 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00
Step [mm] 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Number of plugs [pieces] 45 50 50 50 50 50 50 50 50 50
Type 201.3 (set price) [CHF] 722.90 569.75 557.60 557.60 557.60 557.60 676.95 676.95 676.95 676.95
Diameter from [mm] 5.01 5.51 6.01 6.51 7.01 7.51 8.01 8.51 9.01 9.51
to [mm] 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00
Step [mm] 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Number of plugs [pieces] 50 50 50 50 50 50 50 50 50 50
Type 201.3 (set price) [CHF] 676.95 676.95 963.85 963.85 963.85 963.85 963.85 963.85 963.85 963.85
* measuring length: Ø 0.06 - 0.09 mm: 1.5 mm > Ø 0.09 - 0.30 mm: 2.0 mm
> Ø 0.30 - 0.50 mm: 3.5 mm > Ø 0.50 - 1.50 mm: 5.0 mm > Ø 1.50 - 2.00 mm: 6.0 mm > Ø 2.00 - 3.20 mm: 8.0 mm > Ø 3.50 - 6.00 mm: 10.0 mm > Ø 6.00 - 8.00 mm: 14.0 mm > Ø 8.00 - 10.00 mm: 18.0 mm
Type 201 A g oo d va lue
a lt erna t ive w it h extr a s hor t lea d t imes
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 8
Go / No -Go Double Ended P lug Gauges
Wear and tolerances according to ISO
With engraved plastic handle
M+T standard double ended plug gauges with tolerance H7;
Made out of gauge steel; go side: tungsten carbide / no-go side: gauge steel; completely out of tungsten carbide or ceramic
Extra charge for intermediate sizes, other tolerance zones or accuracies: accuracy 7 up to accuracy 10: 55 %
Extra charge for intermediate sizes, other tolerance zones or accuracies: accuracy 4 up to accuracy 6: 85 %
For go / no-go double ended plug gauges according to special customer’s specifications please ask for a quotation
Diameter [mm] 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
Type 301 H7 (gauge steel) [CHF] 44.15 40.65 34.85 34.85 31.40 31.40 31.40 31.40 31.40 24.40
Type 321 H7 (carbide / steel) [CHF] 89.40 89.40 89.40 89.40 89.40 69.60
Type 311 H7 (tungst. carbide) [CHF] 145.65 145.65 145.65 145.65 145.65 113.30
Type 331 H7 (ceramic) [CHF] 173.75 173.75 173.75 173.75 173.75 141.50
Diameter [mm] 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00
Type 301 H7 (gauge steel) [CHF] 24.40 24.40 25.60 25.60 25.60 26.75 26.75 26.75 26.75 26.75
Type 321 H7 (carbide / steel) [CHF] 69.60 69.60 72.90 72.90 72.90 76.15 76.15 76.15 76.15 76.15
Type 311 H7 (tungst. carbide) [CHF] 113.30 113.30 118.70 118.70 118.70 124.05 124.05 124.05 124.05 124.05
Type 331 H7 (ceramic) [CHF] 141.50 141.50 146.80 146.80 146.80 152.25 152.25 152.25 152.25 152.25
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 9
Thread Measur ing Wires with Eyelet Holder s – D iam eter Ser ies as per Zeiss
With plastic handle incl. eyelet and engraving of diameter
Available as tolerance class 0 (± 0.3 µm – even more accurate than tolerance class 0 according to DIN 2269) and tolerance class 1 (± 1.0 µm)
Made out of gauge steel
Also available as complete set in a wooden box; consisting of 21 sets (1 set at 3 pieces), additionally packed in ampules
Diameter [mm] 0.170 0.195 0.220 0.250 0.290 0.335 0.390 0.455 0.530 0.620 0.725 0.895
Measuring length [mm] 32
Type 401 (tolerance 0) [CHF] 80.80 80.80 61.90 61.90 61.90 48.20 48.20 48.20 44.15 44.15 44.15 44.15
Type 402 (tolerance 1) [CHF] 70.65 70.65 55.50 55.50 55.50 37.50 37.50 37.50 23.30 23.30 23.30 23.30
Diameter [mm] 1.100 1.350 1.650 2.050 2.550 3.200 4.00 5.050 6.350 Assortment
Measuring length [mm] 32
Type 401 (tolerance 0) [CHF] 41.60 41.60 41.60 41.60 41.60 53.45 53.45 53.45 59.45 3 410.45
Type 402 (tolerance 1) [CHF] 21.30 21.30 21.30 21.30 21.30 32.40 32.40 32.40 35.70 2 380.25
Thread Measur ing Wires with Eyelet Holder s – Other Diameter s with Toler ance C lass 0 (± 0 .3 µm)
With plastic handle incl. eyelet and engraving of diameter
Tolerance ± 0.3 μm – more accurate than tolerance class 0 according to DIN 2269
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
Made out of gauge steel, tungsten carbide or ceramic
For thread measuring wires according to special customer’s specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 10.00
Measuring length [mm] 20 * 32
Type 401 (gauge steel) [CHF] 105.95 80.80 61.90 48.20 44.15 41.60 53.45 59.45
Type 411 (tungsten carbide) [CHF] 100.65 94.10 109.90 130.30
Type 431 (ceramic) [CHF] 130.45 129.10 141.95 152.50
* < 0.15 mm: measuring length 20 mm - ≥ 0.15 mm: measuring length 32 mm
Thread Measur ing Wires with Eyelet Holder s – Other Diameter s with Toler ance C lass 1 (± 1 .0 µm)
With plastic handle incl. eyelet and engraving of diameter
Tolerance ± 1.0 μm
Standard step 0.01 mm
Extra charge for intermediate size (step 0.001 mm) for orders of ... pcs. of the same size:
1 piece: 2 pieces: 3 pieces and more:
50% 20% 10%
Made out of gauge steel, tungsten carbide or ceramic
For thread measuring wires according to special customer’s specifications please ask for a quotation
Diameter from [mm] 0.06 0.10 0.20 0.30 0.50 1.00 3.00 6.00
to [mm] 0.09 0.19 0.29 0.49 0.99 2.99 5.99 10.00
Measuring length [mm] 20 * 32
Type 402 (gauge steel) [CHF] 94.20 70.65 55.50 37.50 23.30 21.30 32.40 35.70
Type 412 (tungsten carbide) [CHF] 54.65 48.50 63.25 78.35
Type 432 (ceramic) [CHF] 118.20 117.00 129.50 139.45
* < 0.15 mm: measuring length 20 mm - ≥ 0.15 mm: measuring length 32 mm
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 10
Thread Measur ing Wires with Micrometer Holders – D iam eter Ser ies as per Zeiss
Easy to handle holders including engraving of measuring wire diameter, sets of 3 measuring wires on 2 holders
Tolerance 1 (± 1.0 µm)
Made out of gauge steel
Also available as complete set in a wooden box; consisting of 18 sets (Ø 0.170 mm - Ø 3.200 mm)
Please indicate diameter of micrometer spindle in every order;
The prices are valid for spindle diameter 6.35 mm, 6.50 mm, 6.80 mm, 7.50 mm and 8.00 mm
These prices are only valid for normal pitches of metric threads
Please indicate thread pitch for all orders with wire diameters > 3.200 mm
For thread measuring wires according to special customer’s specifications (e.g.: better tolerance,
other spindle diameters, special pitches, etc.) please ask for a quotation
Diameter [mm] 0.170 0.195 0.220 0.250 0.290 0.335 0.390 0.455 0.530 0.620 0.725 0.895
Type 501 [CHF] 96.55 96.55 96.55 96.55 96.55 96.55 96.55 96.55 96.55 96.55 96.55 96.55
Diameter [mm] 1.100 1.350 1.650 2.050 2.550 3.200 4.000 5.050 6.350 Assortment
Type 501 [CHF] 96.55 96.55 96.55 96.55 96.55 96.55 300.70 300.70 300.70 1 782.95
* Price incl. gauge block for broadening of the measuring surface
Thread Measur ing Wires with Micrometer Holders – Other Diameter s
Easy to handle holders including engraving of measuring wire diameter, sets of 3 measuring wires on 2 holders
Tolerance 1 (± 1.0 µm)
Made out of gauge steel
Please indicate diameter of micrometer spindle in every order;
The prices are valid for spindle diameter 6.35 mm, 6.50 mm, 6.80 mm, 7.50 mm und 8.00 mm
These prices are only valid for normal pitches of metric threads
Please indicate thread pitch for all orders
For thread measuring wires according to special customer’s specifications (e.g.: better tolerance,
other spindle diameters, special pitches, etc.) please ask for a quotation
Diameter from [mm] 0.15 1.01 3.21
to [mm] 1.00 3.20 6.50
Type 501 [CHF] 136.60 136.60 399.85
* Price incl. gauge block for broadening of the measuring surface
Three-Wire Thread Measurement Method Guide:
http://www.mt-swiss.com/S-Produkte%2005.asp
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 11
SCS-Cer t i f icate “A“ (Swiss Ca l ibrat ion Serv ice)
SCS-Certificate (Swiss Calibration Service) for diameter and roundness Diameter range from 1.25 mm to 20.00 mm Calibration preparation of measuring equipment (optic control, standard cleaning, etc.) included
The preparation of extremely dirty measuring equipment is possible for invoicing of costs Attribution of certificates is possible, alternatively by an already fixed identification number of measuring equipment, by taking over your predefined number
or by allocating identification numbers based on the M+T numerical code (for sets: one attributed number per set) Attribution of certificates for newly allocated numbers by labelled individual packaging or by labelled box for sets
If requested and as far as technically possible, we also offer high-quality laser labelling of measuring equipment For calibration services according to special customer’s specifications, please ask for a quotation
Single Set (in a box from 25 pieces onwards)**
Tolerance class 1 and 2 Tolerance class 0 Tolerance class 1 and 2 Tolerance class 0
(Tolerance> ± 0.5 µm) (Tolerance ≤ ± 0.5 µm) (Tolerance > ± 0.5 µm) (Tolerance ≤ ± 0.5 µm)
Type of certificate
Price* Type of certificate
Price* Type of certificate
Price* Type of certificate
Price*
[CHF] [CHF] [CHF] [CHF]
Pin gauges with or without handles 100..05.0100 58.60 100..05.0101 67.35 100..05.0150 35.15 100..05.0151 40.40
Single ended plug gauges 100..05.0102 44.25 100..05.0103 50.90 100..05.0152 26.55 100..05.0153 30.55
Thread measuring wires with microm. hold. (per pair) 100..05.0104 102.50 100..05.0105 117.90 100..05.0154 92.30 100..05.0155 106.15
Go / no-go double ended plug gauges 100..05.0106 84.10 100..05.0107 96.70 on request
* Net, i.e. not eligible for discount
** Thread measuring wires with micrometer holders starting from 16 pieces (pairs of holders) in a box
SCS-Cer t i f ic ate “B“ (Swiss Ca l ibrat ion Serv ice)
SCS-Certificate (Swiss Calibration Service) for diameter Diameter range from 0.06 mm to 20.00 mm Calibration preparation of measuring equipment (optic control, standard cleaning, etc.) included
The preparation of extremely dirty measuring equipment is possible for invoicing of costs Attribution of certificates is possible, alternatively by an already fixed identification number of measuring equipment, by taking over your predefined number
or by allocating identification numbers based on the M+T numerical code (for sets: one attributed number per set) Attribution of certificates for newly allocated numbers by labelled individual packaging or by labelled box for sets
If requested and as far as technically possible, we also offer high-quality laser labelling of measuring equipment For calibration services according to special customer’s specifications, please ask for a quotation
Single Set (in a box from 25 pieces onwards)**
Tolerance class 1 and 2 Tolerance class 0 Tolerance class 1 and 2 Tolerance class 0
(Tolerance > ± 0.5 µm) (Tolerance≤ ± 0.5 µm) (Tolerance > ± 0.5 µm) (Tolerance ≤ ± 0.5 µm)
Type of certificate
Price* Type of certificate
Price* Type of certificate
Price* Type of certificate
Price*
[CHF] [CHF] [CHF] [CHF]
Pin gauges with or without handles 100..05.0200 21.30 100..05.0201 24.50 100..05.0250 6.05 100..05.0251 7.00
Single ended plug gauges 100..05.0202 16.10 100..05.0203 18.50 100..05.0252 4.60 100..05.0253 5.25
Thread measuring wires with microm. hold. (per pair) 100..05.0204 37.25 100..05.0205 42.85 100..05.0254 24.25 100..05.0255 27.85
Go / no-go double ended plug gauges 100..05.0206 30.55 100..05.0207 35.10 on request
* Net, i.e. not eligible for discount
** Thread measuring wires with micrometer holders starting from 16 pieces (pairs of holders) in a box
Addit ional Ser v ices and Spec ia l Condit ions
Laser labelling of identification numbers Net price [CHF]: Single pieces (per piece, Order no.: 100. .05.0300) 5.35 Set starting from 25 or 16 pieces (per piece, Order no.: 100. .05.0301) 3.20 Special cleaning services when extremely dirty (per piece, Order no.: 100. .05.0302) 2.65 Processing fee for non-processible orders (Order no.: 100. .05.0303) 21.30 For receipt of goods, check, etc. plus return dispatch Additional charge for express calibration (Order no.: 100. .05.0304) 16.00 Processing generally within 3 work days after goods receipt Valid for single pieces; sets on request
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 12
SCS-Cal ibr at ion
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 13
Exchangeable Handles for P in Gauges
All types
Price p. piece [CHF] 5.80
Exchangeable Holders
Diameter from [mm] 1.00 2.00 4.00 6.00 8.00
to [mm] 2.00 4.00 6.00 8.00 10.00
Number 1 2 3 4 5
Price per piece [CHF] 19.85 22.05 40.40 54.90 61.85
Express - and Super -Express -Ser v ice
Service: Description: Extra charge net [CHF /piece]: Express-Service Production and dispatch of articles which are not on stock within 3 working days (on request) 24.50 Order no.: 999.9.99.9904
For gauge diameter: Order number: 0.40 - 0.80 mm 100..03.0001 0.80 - 1.30 mm 100..03.0002 1.30 - 1.80 mm 100..03.0003 1.80 - 2.30 mm 100..03.0004 2.30 - 2.80 mm 100..03.0005 2.80 - 3.30 mm 100..03.0006 3.30 - 3.80 mm 100..03.0007 3.80 - 4.30 mm 100..03.0008 4.30 - 4.80 mm 100..03.0009 4.80 - 5.30 mm 100..03.0010
For gauge diameter: Order number: 1.00 - 2.00 mm 100..04.0001 2.00 - 4.00 mm 100..04.0002 4.00 - 6.00 mm 100..04.0003 6.00 - 8.00 mm 100..04.0004 8.00 - 10.00 mm 100..04.0005
PIN GAUGES PIN GAUGES
WITH HANDLE PIN GAUGE SETS SINGLE ENDED
PLUG GAUGES
AND SETS
DOUBLE ENDED
PLUG GAUGES THREAD
MEASURING
WIRES
SCS
CALIBRATION
SERVICES
ACCESSORIES
AND PACKING
High Quality Swiss Made www.mt-swiss.com
MARTIN + TSCHOPP GmbH - 4434 Hölstein/Schweiz Phone: +41 61 956 17 00 - [email protected] - www.mt-swiss.com - Subject to amendments, the conditions of MARTIN + TSCHOPP GmbH apply -
Page 14
Stor age Boxes, P last ic Inserts and Accessor ies for Storage Boxes
Order number: Description: Price per piece [CHF]:
100. .00.0001 Wooden box for 50 pin / plug gauges (incl. inserts)* for Ø 0.10 - 10.00 mm 68.20
100. .00.0002 Wooden box for 100 pin / plug gauges (incl. inserts)* for Ø 0.10 - 10.00 mm 120.65
100. .00.0003 Wooden box for 50 pin gauges with handle (incl. inserts)* for Ø 0.10 - 10.00 mm 80.75
100. .00.0009 Wooden box for 100 pin gauges with handle (incl. inserts)* for Ø 0.10 - 10.00 mm 152.10
100. .00.0004 Wooden box for 40 pin gauges (incl. inserts)* for Ø 10.01 - 15.00 mm 78.65
100. .00.0005 Wooden box for 80 pin gauges (incl. inserts)* for Ø 10.01 - 15.00 mm 130.10
100. .00.0006 Wooden box for 15 pin gauges (incl. inserts)* for Ø 15.01 - 20.00 mm 78.65
100. .00.0007 Wooden box for 30 pin gauges (incl. inserts)* for Ø 15.01 - 20.00 mm 130.10
100. .00.0008 Wooden box (incl. inserts) for 18 sets of art. 501 for Ø 0.17 - 3.20 mm 69.45
100. .01.0003 Plastic inserts* 23.95
100. .01.0001 Special engravings on plastic inserts, each diameter 1.25
* Please indicate required diameter range and type of gauges for all orders
Unusual configurations or inserts for atypical wide diameter ranges might be subject to extra charge
Accessor ies for the Packing and Stor age of Single P in Gauges
Order number: Description: Price per piece net [CHF]:
100. .02.0001 Plastic ampules for pin gauges (short version) 1.00
100. .02.0008 Plastic ampules for pin gauges (long version) 1.00
100. .02.0013 Plastic telescope ampules - Ø 7 mm 1.30
100. .02.0014 Plastic telescope ampules - Ø 12 mm 1.30
100. .02.0015 Plastic telescope ampules - Ø 16 mm 1.30
100. .02.0016 Plastic telescope ampules - Ø 20 mm 1.30
100. .02.0010 Plastic blister packaging for pin / plug gauges (per cell) 0.25
100. .02.0002 Plastic protection cap for pin gauges with handle < Ø 1.00 mm 0.95
100. .02.0007 Plastic box for thread measuring wire with micrometer holders 2.55
MARTIN + TSCHOPP GmbH
Hauptstraße 91
CH-4434 Hölstein
Telephone: +41 61 956 17 00
Telefax: +41 61 956 17 09
Email: [email protected]
www.mt-swiss.com
Price list Effective 1
st November 2014
Prices in CHF excl. VAT.
Ex works incl. standard packaging
Minimum order value 25.- CHF