Instructions for use

Becker® MAP PILOT

1

>>> SAFETY MESSAGE HIERARCHY

> USE

> FR

> ES

Safety message hierarchyThis manual uses the following types ofsafety messages to draw your attention toimportant safety and other informationfor use of the Becker® MAP PILOT.

Please review the symbols and content ofthe boxes below. The information in theDANGER, WARNING, CAUTIONand NOTICE boxes describes the poten-tial consequence associated with disre-garding the messages throughout themanual. The information in the NOTEboxes relates to use of the Becker® MAPPILOT.

DANGERThe warnings contain safety informationregarding hazardous situations, which ifnot avoided, will result in death or seri-ous injury.

WARNINGThese warnings contain safety informa-tion regarding hazardous situationswhich, if not avoided, could result indeath or serious injury.

CAUTIONThese warnings contain safety informa-tion regarding hazardous situationswhich, if not avoided, could result in mi-nor or moderate injury.

NOTICEThese warnings contain information re-garding items or situations which maycause damage to the unit or vehicle if dis-regarded, information regarding unitwarranties and/or information pertinentto traffic laws.

Note:This provides information regarding useof the unit.

2

CONTENTS >>>

> USE

> FR

> ES

Safety message hierarchy 1Contents 2Safety information 4The Becker® MAP PILOT 6Usage 6Unpacking the Becker® MAP PILOT 6

Checking the delivery 6Delivery contents 6

Complaints 7Dealing with the packaging 7

Description of unit 7Battery 7USB connecting cable 7

Map update/Additional functions 7Registration 8Repairs 8Emissions and disposal 8General operation 9Maintenance and care 9Battery quality declaration 10Commissioning 10Power supply 10Memory card 10Unit holder 11Basic operation 11

Calling up navigation mode 11Selecting/highlighting elements 11Back function 12Delete function 12

Menu basics 12Main menu 12Using the input menu 13

Entering characters 13Selecting from a list 14Selecting a character set/special characters 14Switching between upper and lower case 14

Malfunctions 15Content Manager Becker® MAP PILOT 15

Installing the Content Manager Becker® MAP PILOT 15Starting the Content Manager 16

Navigation mode 17What is navigation? 17Last destinations 18

Using last destinations 18Starting with existing destination 18Displaying or editing a destination 18Home address 19

Destination input 20Structure of the destination input menu 20Entering an address 20

Selecting a country 21Selecting a state/province 21Selecting an address and starting route guidance 21Entering an address using speech 25

Points of interest 27POI nearby/POI near destination 27POI near address 28Entering a POI directly by name 28Entering a POI directly by phone number 29

Selecting a destination from the map 29Coordinate entry 29Route planning 30

Creating a new route 31Editing a route 32

Traffic announcements using TMC 32Displaying TMC messages 33

Reading a message 33Displaying the relevant road in the map 33

Taking announcements into consideration when calculating routes 34

Automatic recalculation 34Manual recalculation 34

The map display 35Calling up the map display 35Structure of the map display 35

Map display without route guidance 35Map display with route guidance 36Split screen with route guidance 37Route guidance with arrow display 37

Using the map display 38Map zooming 38

Contents

3

>>> CONTENTS

> USE

> FR

> ES

Map toolbox 38Route guidance 38

Canceling route guidance 38Entering/deleting a stopover 39Setting route options 39Skipping a destination 39Muting announcements 39

My Route 39Displaying the entire route 40TMC on the route 40Point of interest on the route 41Block ahead 42

Map display 43Position display 44Repeating an announcement 45

Settings 46Route guidance settings 46

Route options 46Reality view 47Signposts 47Lane recommendations 47Announcements 48

Map settings 48Autozoom 48POIs on the map 48Speed limits 49Driver alerts 49

TMC settings 50

System settings 50Language 50Design variants 51Pin protection 51Map update reminder 51Information 51Factory reset 52

Glossary 53Index 54NOTICE 56FCC Information 56The type approval 56CE declaration of conformity 57Disposal 57Disposal of the battery 58

Duty to supply information according to battery legislation (BattV) 58

Removing the battery 58 The information and data contained inthis document is subject to change with-out notice.No part of this document may be repro-duced or transmitted for any purposewithout the prior written permission ofHARMAN/BECKER AutomotiveSystems GmbH. All technical data, draw-ings etc. are protected by copyright law.© Copyright 2012, HARMAN/BECKERAutomotive Systems GmbHAll rights reserved.

4

SAFETY INFORMATION >>>

> USE

> FR

> ES

Safety information

WARNING• The unit may only be operated if the traffic situation permits and if you are absolutely certain that you, your fellow

passengers or other road users will not be put at risk, encumbered or distracted by it. This unit should not be used as asubstitute for the personal judgment of the driver.

• Applicable traffic regulations must be observed at all times. Destinations may only be input when the vehicle is stationary.

• The unit may only be used for its intended purpose. The volume of the navigational unit should be set so that noisesoutside the vehicle can still be heard.

• The SD memory card can be removed. Small children could swallow it.

• Insufficient attention to the road, traffic controls or traffic conditions may result in traffic accidents. Accordingly, thedriver should not operate the unit while he/she is driving.

5

>>> SAFETY INFORMATION

> USE

> FR

> ES

NOTICE• The navigational system is only an aid. The data/details provided may in some cases be incorrect. The driver must always

decide whether or not to follow the directions given. We accept no liability for incorrect details issued by the navigationalsystem. As a result of traffic routing changes and deviating data, inaccurate or incorrect instructions may be given. Driversshould always pay attention to the actual road signs and traffic conditions. In particular, the navigational system cannotbe used as a means of orientation in cases of poor visibility.

• The unit should be switched off immediately if faults occur (e.g. development of smoke or smells).

• For safety reasons, the unit may only be opened by a specialist. Please refer to your dealer for repair.

• Never open the unit (with the exception of the battery compartment) or the rechargeable battery. Any modification tothe unit is also impermissible and renders the type approval invalid.

• Use only genuine Harman original accessories. This will ensure that all the relevant regulations are complied with anddamage to health and property is avoided. Dispose of defective units and the rechargeable battery according to theapplicable legal requirements.

• No warranty is granted in the case of improper use. These safety instructions also apply to genuine Harman originalaccessories.

6

THE BECKER® MAP PILOT >>>

> USE

> FR

> ES

The Becker® MAP PILOT

UsageThe Becker® MAP PILOT is a high-per-formance navigation module for use inMercedes-Benz vehicles. The Becker®MAP PILOT can be used with the op-tional equipment "Prefitting for Becker®MAP PILOT" and "Becker® MAPPILOT (incl. prefitting). The unit and the accessories are to be pro-tected against moisture and dirt.

With GPS = Global Positioning Systemyou no longer have to waste time lookingup road maps.Your Becker® MAP PILOT is equippedwith TMC. TMC gives you the option ofreceiving traffic announcements. You willthen be informed of any traffic problems.The system plans an alternative route au-tomatically or on request to avoid traffic

problems, depending on the setting.

Unpacking the Becker® MAP PILOT

Checking the deliveryBefore starting up the Becker® MAPPILOT, the delivery contents must bechecked to ensure they are complete andin good order.> Carefully unpack the packaging con-

tents and check them.

Delivery contents

Becker® MAP PILOTLeaflet with installation instructionsUSB cable

Note:Your Becker® MAP PILOT is deliveredin stable packaging. If the packaging orits contents exhibit serious damage, theunit must not be unpacked further. Inthis case, please contact your dealer.

2 3

1

1

2

3

7

>>> THE BECKER® MAP PILOT

> USE

> FR

> ES

ComplaintsPlease check first on www.beckermappi-lot.com (FAQs, software updates) for pos-sible solutions. If this should not lead tosuccess, please contact your dealer.

Dealing with the packagingThe original packaging must be kept in adry place at least for the warranty period.

Description of unitThe Becker® MAP PILOT consists of thebasic Becker® MAP PILOT unit and thesupplied accessories in the delivery con-tents.

BatteryThe integrated rechargeable battery ischarged when the Becker® MAP PILOTis placed in the holder and the vehicle ig-nition is switched on.

USB connecting cableYou can connect the Becker® MAPPILOT to a standard personal computerhaving a USB interface using the USBconnecting cable provided. The 8 GBflash memory of the Becker® MAPPILOT and any SD card can then be ad-dressed via the PC like a removable stor-age medium.

Map update/Additional func-tionsThe road network is constantly changing,but having a fresh map ensures you havethe wealth of information you need tofind your destination with ease.It is also possible that in the course of fur-ther development of your device newfunctions will be available.With the program described under “Con-tent Manager Becker® MAP PILOT” onpage 15 you can easily keep your Becker®MAP PILOT up to date.

Note:It must be disposed of correctly in linewith the national regulations. The pack-aging must not be burnt. The packagingcan be handed over to the dealer, depend-ing on the country where delivered.

NOTICEThe basic unit and the accessories mustnot be opened or modified in any way.

Note:When the Becker® MAP PILOT is con-nected to a PC, it is supplied with powervia the PC and does not consume batterypower.

8

THE BECKER® MAP PILOT >>>

> USE

> FR

> ES

RegistrationYou can register your product using oursoftware service. We will then inform youof any new updates and other news.

You can register online on the Beckerhomepage www.beckermappilot.com.

The “Map and Software update” menuitem is located under “Service”.

RepairsThe unit must not be opened in the eventof damage. Please contact your dealer.

Emissions and disposalInformation on emissions, electromagnet-ic compatibility and disposal can be foundin “NOTICE” on page 56.

9

>>> GENERAL OPERATION

> USE

> FR

> ES

General operation

Maintenance and careThe unit is maintenance-free.For proper care, a commercially availablecleansing fluid for electrical devices maybe applied using a soft damp cloth.

Your unit was designed and manufacturedwith great care and should be treated withequal care. You will enjoy your unit for along time to come if you observe the rec-ommendations listed below:• Protect your unit and the accessories

from water and moisture. If your unit has been exposed to moisture, switch it off immediately and disconnect the power supply. Allow to dry at room temperature.

• Do not store and operate your unit in a dusty or dirty environment.

• Do not store your unit in hot environ-ments. High temperatures can shorten the service life of electronic components in your unit, damage the rechargeable batteries and cause certain plastics to warp or melt.

• Do not store your unit in cold environ-ments. During operation, when the unit warms up to operating tempera-ture, moisture may form internally, causing damage to electronic compo-nents.

• Do not drop your unit, protect it from shocks and do not shake it. Improper handling can damage components within the unit.

• Never use corrosive or aggressive chem-icals, cleaning solutions or aggressive detergents for cleaning.

All the above information applies equallyto the unit, the rechargeable battery andall accessories. Should one of these partsnot work properly, please contact your au-thorised dealer.

DANGERDanger to life by electrocution. Alwaysswitch off the unit and disconnect themains power supply unit before clean-ing the unit, supplied components or ac-cessories.

Note:Do not use any aggressive or abrasivesubstances or cloths which may damagethe surface.The unit must not be exposed to water.

10

GENERAL OPERATION >>>

> USE

> FR

> ES

Battery quality declarationThe capacity of the rechargeable battery inyour Becker® MAP PILOT decreaseswith every charging/discharging cycle.Improper storage at excessively high orlow temperatures may also cause a gradualdeterioration of capacity. Consequently,the operating time may be substantiallyreduced even in the case of a fully chargedbattery.The rechargeable battery is designed suchthat it should certainly still be possible forit to be charged and discharged after 6months of operation of your unit.

CommissioningOnce the Becker® MAP PILOT has beenunpacked and checked to ensure it is freeof damage, the unit can be started up.The battery is already deployed. To avoida premature discharge, is the contact tothe device interrupted by a slide. Removethis slide from the device.Insert the Becker® MAP PILOT as de-scribed under “Unit holder” on page 11.

Power supplyYour Becker® MAP PILOT has an inte-grated rechargeable battery. The battery ischarged as soon as the Becker® MAPPILOT is placed in the holder and the ve-hicle ignition is switched on.

Memory cardYour Becker® MAP PILOT has a slot foran SD memory card.

The card slot is located on the right side ofthe Becker® MAP PILOT. The card slotis equipped with a spring actuated lockingand ejector mechanism.

Note:Note that if the battery is completely dis-charged, it may take up to a minute be-fore the Becker® MAP PILOT can beactivated again.

CAUTIONThe SD memory card is removable. Keepaway from small children as it could beswallowed.

11

>>> GENERAL OPERATION

> USE

> FR

> ES

Unit holderThe Becker® MAP PILOT is inserted inthe holder in the vehicle’s glove compart-ment.

To remove the Becker® MAP PILOTfrom the holder, push the slide at the frontof the holder.

The Becker® MAP PILOT is releasedand ejected a little way. You can now re-move the Becker® MAP PILOT from theholder.

Basic operationThe Becker® MAP PILOT is operatedusing a number of the controls of the in-stalled audio system.Route guidance instructions are also dis-played in the instrument cluster of the ve-hicle.

Calling up navigation mode> Press the button on the audio sys-

tem.Navigation mode is called up.

Selecting/highlighting elementsTo operate the Becker® MAP PILOTyou must select or highlight menu items.This is done using the rotary control/pushbutton of the installed audio system. Turnthe rotary control/push button to togglebetween the various menu items. This op-erating manual describes the process ofhighlighting.

WARNINGRisk of accident.Do not remove or insert the Becker®MAP PILOT while the vehicle is in mo-tion.Remove or insert the Becker® MAPPILOT only when the vehicle is station-ary.

Note:The slide can be pulled out. When theslide is pulled out, the Becker® MAPPILOT cannot be unlocked. This canserve as an additional protection againsttheft.To unlock the Becker® MAP PILOT theslide can only be inserted one way.

Note:To exit the Navigation mode, press thecorresponding button on the audio sys-tem.

NAVI

12

GENERAL OPERATION >>>

> USE

> FR

> ES

To select a menu item, you must first turnthe rotary control/push button to high-light the item and then press the rotarycontrol/push button.

Back functionAt all menu levels you can return to theprevious menu level by pressing the

button.

During route guidance (route guidance isactive), pressing the buttonbrings you back to the main menu.

Delete functionIn input menus you can delete charactersby pressing the button.

Menu basicsDuring operation you are assisted by vari-ous menus and input windows.

Main menuThe top menu level is the main menu.You can start the various functions of yourBecker® MAP PILOT from the mainmenu.

Information on the individual functionscan be found in the following sections.In addition to the individual functions,the main menu also contains further in-formation and operating options.

Note:The rotary control/push button can alsobe moved in 8 different directions. Thisis dealt with separately in the guide.

Note:

The is located to the left of therotary control/push button.

BACK

BACK

BACK

Note:

The button is located to the rightof the rotary control/push button.

CLR

CLR

13

>>> GENERAL OPERATION

> USE

> FR

> ES

The navigation satellites currently avail-able are shown in the bottom right corner.

If route guidance is already active, the cur-rent destination address is displayed in thebottom line.

To cancel route guidance, push the rotarycontrol/push button downwards and thenpress the rotary control/push button.In the main menu the route guidance canalso be canceled by pressing the button.

Using the input menuSome applications require input using theinput menu.

The characters input using the inputmenu are displayed in the top line of text.The middle section is used for characterentry. The bottom section can display alist of all cities corresponding to the lettersentered so far when entering a city, for ex-ample.

Entering charactersCharacters are input by selecting themwith the rotary control/push button.

When a navigation destination is entered,the Becker® MAP PILOT compares thedata with the stored data.Only those letters that are still possible areavailable for selection.If you have selected enough letters, a listautomatically appears. Select the desiredentry from the list using the rotary con-trol/push button.

CLRNote:The input menus that are not used fordestination input are locked when yourvehicle is traveling at a speed in excess of3 mph. If you are currently in such an in-put menu, a message indicating that themenu has been locked will be displayed.The menus are enabled again when thespeed falls below 2 mph.

Note:

Pressing the button deletes the lastcharacter entered.A space is entered when the underscorecharacter (_) is selected in the inputmenu.

CLR

14

GENERAL OPERATION >>>

> USE

> FR

> ES

Selecting from a listOnce a few letters of the desired selectionhave been entered, you can select yourdestination from the selection list.> In the input menu, push the rotary con-

trol/push button downwards.

> Select the desired entry from the list us-ing the rotary control/push button.

The entry is accepted and the selection listis closed.

Selecting a character set/special char-actersYou can also select different character setsfor the input menu.

> Select to display the special charac-ters available for the entered characterset.

or> Select to switch the character set.

Switching between upper and lowercaseDuring free text entry, it is possible toswitch between upper/lower case and theautomatic function.

> Select the desired function using the ro-tary control/push button.

• represents the entry of upper case letters.

• represents automatic mode. This means that, on entry, the first letter is automatically in upper case and subse-quently changes automatically to lower case.

• represents the entry of lower case letters.

1 2

1

2

1 2 3

1

2

3

15

>>> GENERAL OPERATION

> USE

> FR

> ES

MalfunctionsShould there be a malfunction in the op-erating system or in the unit, they will bedisplayed accordingly.You can even try to correct the malfunc-tion:> Remove, as described under “Unit

holder” on page 11, the Becker® MAPPILOT from the holder.

> Wait a while and insert the Becker®MAP PILOT again.

or> Press (e.g. with a ballpoint pen) the re-

set button on the front of the insertedBecker® MAP PILOT.

The Becker® MAP PILOT then restarts.

If the messages recur or the unit does notwork properly for other reasons, pleasecontact your dealer.

Content Manager Becker® MAP PILOTThe Content Manager Becker® MAPPILOT is a PC based application contain-ing a number of important functions tohelp you manage the content on yourBecker® MAP PILOT. With the ContentManager Becker® MAP PILOT you can:

• back up the content saved on the Becker® MAP PILOT to your PC and restore it later to your Becker® MAP PILOT,

• download current content from the In-ternet and install it on the Becker® MAP PILOT.

To use the Content Manager Becker®MAP PILOT, you will need the USB ca-ble provided as well as a computer thatmeets the following minimum require-ments:

• Operating system Microsoft Windows XP (SP2), Vista or Windows 7

• Microsoft Internet Explorer 7 or higher

• PC with USB 2.0

• fast internet connection with more than 2 Mbit/s

• at least 10 GB free storage space.

Installing the Content Manager Becker® MAP PILOTYou can install the Content ManagerBecker® MAP PILOT on your computerwith the following steps:> Connect the USB interface of the

Becker® MAP PILOT directly to theUSB port of the computer using theUSB cable provided.

After a short time, the Becker® MAPPILOT is displayed as a removable storagemedium on the computer.

The installation should start automatical-ly.

Note:When you connect the Becker® MAPPILOT to the PC for the first time, thePC installs all the necessary drivers andthen displays the message "Your unit isnow ready to use".

16

GENERAL OPERATION >>>

> USE

> FR

> ES

> Follow the instructions of the software.The Content Manager Becker® MAPPILOT can be started immediately afterinstallation.This completes the installation procedure.

Starting the Content Manager> Connect the USB interface of the

Becker® MAP PILOT directly to theUSB port of the computer using theUSB cable provided.

After a short time, the Becker® MAPPILOT is displayed as a removable storagemedium on the computer.> Click on Start > All Programs on the

computer.> Select Content Manager.> Click on Content Manager.

The Content Manager Becker® MAPPILOT is started.

Note:If the installation does not start automat-ically, start in the folder “Content Man-ager” on the removable storage mediumthe file “Setup.exe”.

17

>>> NAVIGATION MODE

> USE

> FR

> ES

Navigation mode

What is navigation?The term “navigation” (lat. navigare = totravel by sea) is generally understood tomean the location of a vehicle, the deter-mination of the direction and distancefrom the desired destination and the re-quired route. Stars, prominent landmarks,compass and satellites etc. are used as nav-igation aids.With the Becker® MAP PILOT, the lo-cation is determined by the GPS receiver.The Global Positioning System (GPS)was developed during the 1970s by theUS military as a weapons guiding system.GPS is based on a total of 24 satellites or-biting the Earth and emitting signals. AGPS receiver receives these signals anduses the signal times to calculate the dis-tance to an individual satellite, and thendetermines your current geographical po-sition.

Signals from at least three satellites are re-quired to determine your position; yourheight above sea level can be calculated ifsignals are received from four or more sat-ellites.The Becker® MAP PILOT determinesthe direction and distance from the desti-nation using a navigation computer and adigital street map held in its internalmemory.For safety reasons, route guidance is givenpredominantly in spoken form. This issupported by a direction indicator and amap display.

WARNING• Road traffic regulations always take

priority. The navigation system is only an aid. Errors may occur in individual data items/entries. At all times, the driver must decide whether or not to heed the information provided. We do not accept liability for erroneous data provided by the navigation system.

• Observation of traffic signs and local traffic regulations must always take pri-ority.

• Traffic guidance is restricted to passen-ger vehicles. Special driving recom-mendations and regulations for other vehicles (e.g. commercial vehicles) are not included.

• Destinations may only be enteredwhen the vehicle is stationary.

18

NAVIGATION MODE >>>

> USE

> FR

> ES

Last destinationsIn the last destinations, the most recentdestinations and stored destinations aredisplayed and can be selected directly.> Select Last destinations from the main

menu.

If you have already entered your home ad-dress, you can start route guidance to yourhome address in the last destinations(Home).The destination list containing the desti-nations most recently traveled to as well asstored destinations is displayed in the linesbelow this.

Using last destinations

Starting with existing destinationThe destinations available in the last des-tinations are included in the destinationlist.> Select the desired entry from the list us-

ing the rotary control/push button tostart route calculation.

The calculation begins. When the calcula-tion is complete, the map appears and theroute guidance begins.

Displaying or editing a destinationAny destination stored in the last destina-tions can be displayed and edited.> Highlight the desired entry using the

rotary control/push button.> Push the rotary control/push button to

the right.

Note:Up to 200 of the most recent destinationsare automatically stored in the destina-tion list. If the storage capacity is reached,the oldest destination is automatically de-leted to make room for a new destina-tion. However, important destinationscan be protected.Protected entries are identified by the symbol.If you select your home address and it hasnot yet been defined, you will be request-ed to enter the address.

19

>>> NAVIGATION MODE

> USE

> FR

> ES

Home addressWhen you select Home with the rotarycontrol/push button you will be asked toenter an address if no home address hasyet been entered.> Select Yes to enter the address.You can then enter a destination as de-scribed under “Destination input” onpage 20.

Option MeaningShow details The data for the destina-

tion is displayed. From this screen you can dis-play the destination on the map, display the route or start the route guidance.

Name entry The destination can be renamed. If the destina-tion is given a name it is automatically protected.

Protect entry The destination is pro-tected against automatic deletion. This function is only available in the case of unprotected destina-tions.

Remove pro-tection

Protection of the destina-tion is disabled. This function is only available for protected destina-tions.

Move up / Move down

The destination is moved forward/back by one po-sition. If the destination is moved it is automati-cally protected.

Delete entry The destination is delet-ed from the last destina-tions.

Delete all All destinations and your home address are deleted from the list.

Option Meaning

Note:The menu items Set current positionand Select from last destinations canalso be used to select a destination.

20

NAVIGATION MODE >>>

> USE

> FR

> ES

Destination inputYou can enter a destination in a number ofways.> Select Enter destination from the main

menu.

The destination input menu will appear.

Structure of the destination in-put menu• Enter address

The various steps from selecting an ad-dress to starting route guidance can be carried out using Enter address. See “Entering an address” on page 20.

• Enter point of interestPoints of interest such as airports and ferry ports, restaurants, hotels, gas sta-tions or public buildings can be selected and route guidance started using Enter point of interest.See “Points of interest” on page 27.

• Select on mapWith Select on map, you can select a destination directly on the map and start route guidance.See “Selecting a destination from the map” on page 29.

• Enter geo-coordinatesThe geographical coordinates for a des-tination can be entered and route guid-ance started via Enter geo-coordinates. See “Coordinate entry” on page 29.

• Route planningA route with several stopovers can be planned using Route planning.See “Route planning” on page 30.

Entering an address> Select Enter address from the destina-

tion input menu.The menu for entering addresses appears.The last address entered is already enteredautomatically.

21

>>> NAVIGATION MODE

> USE

> FR

> ES

Selecting a country

> Select the flag to access the country se-lection list.

The selection list will appear.

> Select the desired country.

Selecting a state/province

> Select the entry containing the state/province to access the state/province en-try menu.

> Select the letters of the destinationstate/province consecutively.

When sufficient letters have been enteredit will automatically switch to a list fromwhich you can select the state/province.

Selecting an address and starting routeguidance

The following settings can be made in theaddress input menu:• City

• Postal code

• Street and house number• Intersections as an orientation aid

It is also possible to:

• start the route guidance straight away.• search for a point of interest near to the

address entered (POI search). This can be entered as described under “POI near address” on page 28.

• save the destination with name in the last destinations.

• show the route on the map.

Note: If a country is already selected it will re-main until you select a different country.

Note: If a state/province has already been en-tered it will remain until you select a dif-ferent state/province.

22

NAVIGATION MODE >>>

> USE

> FR

> ES

Selecting the street

In the Street menu field the street andhouse number can be entered separately.The Becker® MAP PILOT excludes allimpossible letter combinations and acti-vates only those letters that could give anexisting street name.A house number can only be chosen oncethe street has been selected and if housenumbers are included in the data.

> Select the letters of the destinationstreet consecutively.

When sufficient letters have been selectedit will automatically switch to a list fromwhich you can select the street. However,you can switch to the list before this bypushing the rotary control/push buttondownwards. You can then select the streetfrom the list.

Selecting a city

The destination city can be specified byentering the name or postal code.When you select the letters of a city, theBecker® MAP PILOT displays sugges-tions. If you do not wish to accept the sug-gestion simply select the subsequent let-ters of the desired city.The Becker® MAP PILOT excludes allimpossible letter combinations and postalcodes and activates only those letters andnumbers that could give the name of anexisting city or postal code.

> Select the letters of the destination cityor the numbers of the postal code con-secutively.

Note:If you want to enter city first:> Push the rotary control/push button to

the right.> Select City first.

Note:If two words need to be entered you mustenter them by selecting the underscorecharacter (_).

Note:If you want to enter street first:> Push the rotary control/push button to

the right.> Select Street first.

23

>>> NAVIGATION MODE

> USE

> FR

> ESWhen sufficient letters have been enteredit will automatically switch to a list fromwhich you can select the city. However,you can switch to the list before this bypushing the rotary control/push buttondownwards. You can then select the cityfrom the list.

Selecting the intersectionAfter entering the destination city andstreet, you can enter an intersection so asto further limit the choice.

> Select Intersection.The input menu for the name of the inter-section will appear.> Select the letters of the intersection con-

secutively.Once a few letters of the desired streethave been entered a list will automaticallybe displayed.However, you can switch to the list beforethis by pushing the rotary control/pushbutton downwards. You can then selectthe intersection from the list.

Selecting a house numberAfter entering the destination city andstreet, you can enter a house number so asto further limit the choice.

> Select No.The input menu for the house numberwill appear.> Enter the house number.> Select from the automatically displayed

list the desired house number.

Note:If two words need to be entered you mustenter them by selecting the underscorecharacter (_).

Note: Instead of entering an intersection, youcan also enter a house number. However,it is not possible to enter both at the sametime.

Note: Instead of entering the house number,you can also enter an intersection. How-ever, it is not possible to enter both at thesame time.

24

NAVIGATION MODE >>>

> USE

> FR

> ES

Displaying the routeOnce the address has been entered, the ad-dress input menu allows the route to thedestination to be displayed on the map.> Push the rotary control/push button to

the right.> Select Show route to display the route

on the map.The route is calculated.

You can start the route guidance directlyfrom this screen by selecting Start.

The other options on this screen are de-scribed under “Displaying the entireroute” on page 40.

In addition to these described functions,you can also display alternative routes.> Select Options und then select

Alternative routes.

After a short time, the alternative routeswill be displayed.

The area on the right-hand side shows thecolour key for the individual routes, themileage for each route and the estimateddriving time.> Select the desired route.The desired route is calculated and theroute guidance will begin.

Showing the destination on the map> In the address input menu, push the ro-

tary control/push button to the right.> Select On map.The map display is opened and the desti-nation is displayed.

Storing a destination> In the address input menu, push the ro-

tary control/push button to the right.> Select Save.> Enter the desired name.The destination is transferred to the lastdestinations and protected.

25

>>> NAVIGATION MODE

> USE

> FR

> ES

Starting route guidance> In the address input menu, select Start

guidance to start route guidance.

All data entered thus far is processed whencalculating the route. The map will thenbe displayed and the route guidance willbegin.

If the route guidance is already runningyou will be asked whether the new desti-nation should replace the old destinationor if the new destination should be regard-ed as a stopover.

> Select Add as stopover or Replace olddestination.

If the route guidance is already runningand a stopover has already been enteredyou will be asked whether the new desti-nation should replace the old destinationor the stopover.

> Select Replace stopover or Replaceold destination.

Entering an address using speechYou can start address entry using speechfrom the address input menu by selecting

or from the main menu by selectingPTT.Is your vehicle equipped with a steeringwheel button for voice control, you canalso press this button.

After the function is activated, a displaythat shows you how to say an address willbe shown.

Note: The symbols above the address refer torestrictions that you may have activated(e.g. unpaved roads, toll roads).

Notes: • Only one address can be entered using

the voice entry function. Lists for more precise selection cannot be operated using speech.

• The destination country cannot be en-tered using speech.

• The symbol in the list of countries indicates the countries for which ad-dress entry using speech is possible.If entry using speech is not possible,

and PTT cannot be selected.

• An address and the street number must be spoken in the language of the desti-nation country.

26

NAVIGATION MODE >>>

> USE

> FR

> ES

You can say the address as soon as you seethe lines next to the stylised face.

> Say the address.

If your entry is unique, after a short timethe menu for entering addresses will bedisplayed with your entry filled in.

If the address displayed does not matchthe address you said, you can make appro-priate changes.If the address is correct, you can startroute guidance, display the route or storethe address as described on page 25.

If your entry was not unique or theBecker® MAP PILOT was not able touniquely assign your entry, you will beshown appropriate lists. You can then se-lect the address you want from these lists.Depending on your entry, lists with citynames, lists with street names or com-bined lists with city and street names canbe displayed.

The following example shows a list inwhich a city can be selected.

Entries identified with the symbolopen up a further list when they are select-ed. This can be necessary if, for example,the same city name occurs a number oftimes in the set country.

Once you have selected the city or streetyou want in the lists, the menu for enter-ing addresses is displayed after a short timewith your entry filled in.You can then start route guidance, displaythe route or store the address as describedon page 25.

Notes:• If a number of languages are spoken in

the destination country (as is the case in Canada, for example), you can set another language by selecting Change language.

• You can say the complete address or just a part of it.Possible entries include:- City - street - street number- City - street- City

27

>>> NAVIGATION MODE

> USE

> FR

> ES

Points of interestPoints of interest (POI for short) includeairports and ferry ports, restaurants, ho-tels, gas stations, public buildings. Youcan use points of interests as navigationdestinations.> Select Enter point of interest from the

destination input menu.

The POI menu appears.You can choose between

• a point of interest nearby,

• a point of interest near an address,• a point of interest near a destination,

• a point of interst search by name, or

• a point of interst search by phone num-ber.

POI nearby/POI near destination> In the POI menu, select POI nearby for

a POI nearby.or> In the POI menu, select POI near des-

tination for a POI near the destination.

> Select one of the available categories.

For some categories, e.g. gas stations, afurther selection menu is displayed inwhich you can narrow down the choicefurther, e.g. by brand.

If you have selected the category, anypoints of interest belonging to relevantcategory and available within the area inquestion will now be displayed.

The name, distance as the crow flies andthe address is displayed for each entry.> Select the desired point of interest.

You will now receive additional informa-tion about your chosen destination.

Note:You can also select Search all catego-ries: An input menu will then open andyou can enter the name of a point of in-terest directly and confirm it.

28

NAVIGATION MODE >>>

> USE

> FR

> ES> Select Start guidance to begin routeguidance to the point of interest straightaway.

POI near address> In the POI menu, select POI near ad-

dress.

> Select the desired country.> Enter the city and, if necessary, the

street in which you wish to search for apoint of interest.

> Press the Select category button.

The points of interest categories availablefor the entered city are displayed.> Select the desired point of interest as de-

scribed under “POI nearby/POI neardestination” on page 27.

Entering a POI directly by name> In the POI menu, select POI search by

name.

> Enter the desired point of interest orpart of the name.

> To confirm the previous input, select or press and hold the rotary con-

trol/push button.

The Becker® MAP PILOT displays in alist all the points of interest correspondingto the name entered.

> Select the desired destination from thelist.

> Select Start guidance to begin routeguidance to the point of interest straightaway.

Note:Push the rotary control/push button tothe right for further control options.

Note:If you have already entered an address,this address will appear by default.

Note:You can also select Select POI. An inputmenu will then open and you can enterthe name of a point of interest directlyand confirm it.

Note:The search radius is limited to 125 milesaround your current position.A maximum of 50 points of interest aredisplayed.

29

>>> NAVIGATION MODE

> USE

> FR

> ES

Entering a POI directly by phone number> In the POI menu, select POI search by

phone number.

> Enter the phone number (or a part of it)of the desired point of interest.

When sufficient numbers have been se-lected the Becker® MAP PILOT will au-tomatically switch to a list from which youcan select the point of interest. However,you can switch to the list before this bypushing the rotary control/push buttondownwards. You can then select the pointof interest from the list.

> Select the desired destination from thelist.

> Select Start guidance to begin routeguidance to the point of interest straightaway.

Selecting a destination from the mapYou can select a destination straight fromthe map.> Select Select on map from the destina-

tion input menu.The map display appears.

> Search for the desired position.

> Press the rotary control/push button.

A list of possible destinations, an addressor geographical coordinates are then dis-played according to the position of thecursor.

> Select Start guidance to begin routeguidance to the destination straightaway.

Coordinate entryYou can also enter your destination usinggeographical coordinates.> Select Enter geo-coordinates from the

destination input menu.Note:The search radius is limited to 125 milesaround your current position.

Note:Turn the rotary control/push button tochange the scale of the map display.Push the rotary control/push button tomove the displayed cursor to the desiredposition.

Note:Push the rotary control/push button tothe right for further control options.

1

2

3

30

NAVIGATION MODE >>>

> USE

> FR

> ES

> Select to set the direction requiredfor the geographic latitude.

> From the numbers indicated by se-lect the required numbers.

> Select .> Enter the geographical longitude as de-

scribed earlier.

Where possible, an address matching thecoordinates will be displayed.

> Select Start guidance to begin routeguidance to the destination straightaway.

Route planningThe route planning menu allows you tocreate and select individual routes. To dothis, enter the individual destinationpoints for the desired route. It is then pos-sible to travel to these points consecutivelywithout having to enter any further infor-mation. You can also optimize the desti-nation points entered and in so doingchange their order.> Select Route planning from the desti-

nation input menu.

This displays the route menu.In the route menu you can create a newroute by selecting Create new route. Pre-viously stored routes are shown in a listbelow this.

Editing stored routesYou can change the name of a stored routeor delete it.> Highlight the route you wish to edit.> Push the rotary control/push button to

the right.By selecting Rename route you can givethe route a new name. By selecting Deleteroute you can delete the route from thestored routes.

Selecting and starting a route> Select the required route from the route

menu.The route is loaded and displayed in thestage menu.

> Select Calculate.

Notes:By selecting you can switch from de-gree to decimal input and vice versa.

Note:Push the rotary control/push button tothe right for further control options.

1

2

3

Note:If no routes have yet been stored, theroute menu is empty.

31

>>> NAVIGATION MODE

> USE

> FR

> ES> Select the start point or your current

position as the start point for routeguidance.

The individual stages are calculated.A map of the stages will then be displayed.

The total distance and estimated totaljourney time are displayed on the left-hand side.> Select Start to start route guidance or

select one of the functions described be-low.

• Route listDisplays a list of the individual stages.

• OptionsCalls up further options. You can then simulate the route, optimize the route (order of the destinations to be traveled to) and call up the route options.

• and Scrolls through the in-dividual stages in the route.

Creating a new route> Select Create new route from the route

menu.

You can now enter a stage destination asdescribed under “Destination input” onpage 20. You also have the option of se-lecting a destination in the last destina-tions using Select from last destinations.

> Select Add stage to enter further stagedestinations as described above.

> When you have entered all stage desti-nations, select Save Route. Assign theroute a name.

Note:You can also select a stage in the routehere. The route is then started from thisstage.

Note:When a start point is selected, this is onlyused for the purposes of displaying aroute.

32

NAVIGATION MODE >>>

> USE

> FR

> ES

Editing a route> Select the route you wish to edit.> Highlight the stage that you wish to ed-

it.> Push the rotary control/push button to

the right.The edit menu will be displayed. The fol-lowing options are available:

Traffic announcements us-ing TMCYour Becker® MAP PILOT can receivetraffic announcements (TMC messages)from radio stations.

Traffic announcements are transmitted byradio stations via the TMC (Traffic Mes-sage Channel) in addition to the radioprogramme and are received and analyzedby the navigation system. Receiving trafficannouncements is free of charge.

The Becker® MAP PILOT constantlychecks whether there are any relevant an-nouncements for the route that has beenset.If the continuous checks determine that atraffic announcement is relevant to routeguidance, the unit can automatically re-calculate a new route to the destination(See “TMC settings” on page 50.).

Option MeaningStart guid-ance

Start route guidance from the selected stage.

Show details The data relating to the stage destination is dis-played.

Move up / Move down

The stage is moved for-wards/backwards by one position.

Replace stage

You can replace the se-lected stage with another stage destination.

Delete stage The stage is deleted from the route.

Note:TMC is not available in all countries.

Note:As the traffic announcements are trans-mitted by radio stations, we cannot as-sume responsibility for the completenessor accuracy of the announcements.

33

>>> NAVIGATION MODE

> USE

> FR

> ES

Displaying TMC messagesOnce you have connected the Becker®MAP PILOT to the unit holder, yourBecker® MAP PILOT will receive up-to-date traffic announcements and dynamicroute calculation will be enabled (trafficjam diversion). You can also view trafficannouncements directly.Settings for TMC can be made as de-scribed under “TMC settings” onpage 50.> Select TMC from the main menu.

The message list appears.

Reading a message> Select the desired message in the mes-

sage list.

The message display appears.

> Select to scroll through the receivedmessages.

By selecting Detour you can specifywhether or not a message is to be takeninto account in the route calculation.

Displaying the relevant road in the map> Select On map in the message display.

The relevant road can be seen in the map.By selecting Text view you can return tothe message display.By selecting you can scroll through allthe messages in the message list and showthem on the map.By selecting Detour you can specifywhether or not a message is to be takeninto account in the route calculation.

Note:If the entire message does not fit in thedisplay area, you can select More... to dis-play the rest of the message.

1 1

1

1

1

34

NAVIGATION MODE >>>

> USE

> FR

> ES

Taking announcements into con-sideration when calculating routesYour Becker® MAP PILOT can take traf-fic announcements into considerationwhen calculating a route. You have theoption of setting this function to automat-ic, manual or never under “TMC settings”on page 50.

Automatic recalculationIf your route is affected by a traffic prob-lem, the Becker® MAP PILOT checkswhether a diversion to bypass the problemis feasible. If a diversion is feasible, a de-tour is calculated and you are guided viathe detour.

Manual recalculationIf a traffic announcement affects yourroute, a window with detailed informa-tion on the traffic announcement appears.By selecting Detour you can specifywhether or not the message is to be takeninto account in the route calculation.

You can change your chosen setting at anytime in the message list.

If after the selection of Detour theBecker® MAP PILOT determines that anexpedient alternative route is possible, thefollowing display appears.

The display provides you with an over-view of the alternative route calculated.The red route or route marked purple foran obstruction shows the previous route.The route marked green displays the alter-native route calculated. In the upper sec-tion of the display, you can see for the pre-vious route and the alternative route thedistance to be traveled and the estimatedjourney time.> Select the desired route.

Note:A detour is not generally calculated whenyou select Detour. This is only donewhen it is feasible in terms of time savingsand the route to be driven.

35

>>> NAVIGATION MODE

> USE

> FR

> ES

The map displayThe map display is used primarily forroute guidance. However, you can also usethe map display without route guidance toshow your current position and, for exam-ple, to receive warnings about exceedingthe speed limit.

Calling up the map displayThe map display is called up automatical-ly when you start route guidance.Without route guidance, you can call upthe map display from the main menu orby a longpress on the button inseveral base menus.

> Select Map from the main menu.The map display will then appear and, ifGPS reception is available, will show yourcurrent position.If route guidance is already active, themap will be displayed with route guid-ance.

Structure of the map displayThe structure depends on the settingsmade in “Map display” on page 43 andwhether route guidance is active or not.

Map display without route guidance

If the navigation is not active, almost thewhole area of the display will be taken upby the map.

Speed limit on the road currently be-ing driven on (display not availablefor all roads), signs for the driveralerts will also be displayedCurrent map scale and a compassNumber of satellites currently beingreceivedVehicle positionCurrent road

Note:The map display can show signs (e.g.speed limits). Please note that this is ad-ditional information in the map data.The reality may differ from those signs.The traffic situation and the local roadsigns take precedence over the navigationsystem information.

BACK

1

4

5

3

2

1

2

3

4

5

36

NAVIGATION MODE >>>

> USE

> FR

> ES

Map display with route guidance

Road signs, which you should followSpeed limit on the road currently be-ing driven on (display not availablefor all roads)Driver alertsCurrent map scale and a compassNumber of satellites currently beingreceivedDisplay of TMC statusVehicle positionCurrent road or Traffic lane recom-mendation (only appears on somemulti-lane roads; green arrows = rec-ommended lanes)

Distance to next driving maneuverNext driving maneuverEstimated time of arrival, remainingjourney time and remaining distanceto destination

Your current position is displayed on themap via the position icon.

Information is also displayed on the left inthe preview area.

The next maneuver is displayed as an ar-row, with the distance to the next maneu-ver point indicated underneath it. If twodriving maneuvers are to be performed insuccession within a short time, anothersmaller arrow indicating the second driv-

ing maneuver is displayed above the firstarrow.

This arrow tells you that you are currentlyon a non-digitized road.The arrow indicates the air direction (asthe crow flies) of the destination.

Information on the TMC status is dis-played in the bottom line. There are threepossible TMC statuses:

If the first icon is displayed, TMC is oper-ating correctly. If the second icon is dis-played, there is a hold-up on the route.If the third icon is displayed, TMC recep-tion is disrupted and no TMC messagescan be received.

This icon instead of the speed limit iconinforms you, that you are in an area wherethe road information is not completely at-

1

6

11

10

9

2

3

58

74

1

2

3

4

5

6

7

8

Note:Following the traffic lane recommenda-tions allows you to perform the next driv-ing maneuver without changing lanes.

9

10

11

37

>>> NAVIGATION MODE

> USE

> FR

> ES

tributed. This means that for example theone way information is missing.

Split screen with route guidance

Road signs, which you should followSpeed limit on the road currently be-ing driven on (display not availablefor all roads)Driver alertsCurrent map scale and a compassNumber of satellites currently beingreceivedDisplay of TMC statusVehicle positionCurrent road or Traffic lane recom-mendation (only appears on somemulti-lane roads; green arrows = rec-ommended lanes)

Distance to next driving maneuverProgress bar to illustrate the distanceto the next driving maneuverNext driving maneuverEstimated time of arrival, remainingjourney time and remaining distanceto destination

Route guidance with arrow display

Estimated time of arrival, remainingjourney time and remaining distanceto destinationCompassNumber of satellites currently beingreceivedDisplay of TMC status

Driver alertsSpeed limit on the road currently be-ing driven on (display not availablefor all roads)Next driving maneuver but oneCurrent road or Traffic lane recom-mendation (only appears on somemulti-lane roads; green arrows = rec-ommended lanes)

Distance to next driving maneuverProgress bar to illustrate the distanceto the next driving maneuverNext driving maneuverRoad signs, which you should follow

1

6

12

10

2

3

58

7

11

89

3

1

2

3

4

5

6

7

8

Note:Following the traffic lane recommenda-tions allows you to perform the next driv-ing maneuver without changing lanes.

9

10

11

12

12

9

6

10 7

11

1

3

458

2

1

2

3

4

Note:Following the traffic lane recommenda-tions allows you to perform the next driv-ing maneuver without changing lanes.

5

6

7

8

9

10

11

12

38

NAVIGATION MODE >>>

> USE

> FR

> ES

Using the map display

Map zoomingIf the Autozoom function is enabled as de-scribed under “Map display” on page 43or “Autozoom” on page 48, the map is en-larged or reduced according to these set-tings.However, you can also enlarge or reducethe map at any time during route guid-ance by turning the rotary control/pushbutton. The Autozoom function is thendisabled until the next maneuver isreached or for the duration of 60 seconds.

In the bottom right corner of the map, thecurrent map scale and compass is dis-played.

Map toolboxUsing the map toolbox you can changethe settings for route guidance, for themap display mode and for the route.> In the map display, press the rotary con-

trol/push button.

The map toolbox is displayed.

Route guidance

> Select Guidance in the map toolbox.

The route guidance menu appears.

Canceling route guidanceYou can cancel active route guidance.> In the route guidance menu, select Stop

guidance.This cancels route guidance to all destina-tions.

Note:The following functions are only avail-able when route guidance is active.

Note:You can also cancel route guidance as de-scribed in “Main menu” on page 13.

39

>>> NAVIGATION MODE

> USE

> FR

> ES

Entering/deleting a stopoverWith this function, you can enter a stop-over or delete an entered stopover.> In the route guidance menu, select Add

stopover.You can now enter a destination as a stop-over as described in “Destination input”on page 20. You also have the option ofselecting a destination in the last destina-tions using Select from last destinations.Once you have entered the desired stop-over, the route is recalculated.The entered stopover is marked on themap as a red flag.

Deleting a stopover> In the route guidance menu, select De-

lete stopover.The stopover is deleted. The system per-forms a route recalculation.

Setting route optionsYou can modify the route options (routeselection etc.) during route guidance.> In the route guidance menu, select

Route options.> Set the route options as described under

“Route options” on page 46.After a change, the route is recalculated.

Skipping a destinationIf a planned route with a number of desti-nations is active, you can delete the cur-rent destination of the route. Route guid-ance to the next destination will then beinitiated.This might be necessary if, for example, adestination was not driven to directly.Otherwise the Becker® MAP PILOT willattempt to guide you to the current desti-nation.> In the route guidance menu, select Next

destination.Route guidance to the next destinationwill be initiated.

Muting announcementsYou can mute the navigation system an-nouncements.> In the route guidance menu, switch

Mute on or off .

My Route

> Select My route in the map toolbox.

The My Route menu appears.

Note:The following functions are only avail-able when route guidance is active.

40

NAVIGATION MODE >>>

> USE

> FR

> ES

Displaying the entire routeYou can display the entire route to thedestination on the map. You also have theoption of displaying the complete direc-tions and blocking particular sections/roads of the route permanently. As a fur-ther option you can display the variousroutes that you can set in the route op-tions and also select them if you wish.> In the My Route menu, select Show

route.

The entire route is displayed.On the left-hand side you can see the dis-tance to be traveled and estimated journeytime. The destination address appears atthe bottom of the display.

Select Resume to continue route guid-ance.

Displaying the route listYou can display the route in a list.> With the entire route displayed, select

Route list.

The route list is displayed.

Setting route optionsYou can set the route options.> With the entire route displayed, select

Options.> Select Route options.> Set the route options as described under

“Route options” on page 46.After a change, the route is recalculated.

Simulating a routeYou can also start a simulation of theroute.> With the entire route displayed, select

Options.> Select Simulation.The route is simulated at four times thenormal speed.Pressing switches to the next ma-neuver.The simulation can be canceled by press-ing the button.

TMC on the routeYou can view and edit TMC messages lo-cated on your route.

> In the My Route menu, select TMC onroute.

Note:The TMC messages that have led to achange in the route are also displayed.

CLR

BACK

41

>>> NAVIGATION MODE

> USE

> FR

> ES

The TMC messages located on your routeare displayed.Once you have selected a message you candecide e.g. whether or not to divertaround the hold-up. Please also refer tothe description in “Traffic announce-ments using TMC” on page 32.

Point of interest on the routeDuring route guidance, you can displaythe points of interest located on the route.You can specify which categories of pointsof interest should be displayed, and youcan also choose whether to display onlythe nearest POIs, all the POIs on the en-tire route, or only POIs near the destina-tion.> In the My Route menu, select POI on

route.

The nearest points of interest for the threeselected categories are displayed.The distance indicated shows the distanceto the point of interest. The points of in-terest are displayed on the map on the left-hand side.After selecting one of the points of inter-ests you can start route guidance to it.

Setting categories> Select More....

> Select Select POI categories.> Then select the desired categories.

Point of interest near destination/oncomplete route> Select More....

> Select Search POI on route.or> Select Search POI near destination.> Select the desired category.> Then select the desired point of interest.> Start navigation to the selected point of

interest.

Note:Did you set the automatic considerationunder “TMC settings” on page 50, youcan not influence whether you will be di-rected around the hold-up.

42

NAVIGATION MODE >>>

> USE

> FR

> ES

Block aheadYou can block a stretch of road ahead oran area. This determines a certain stretchof road or an area that should not be used.The Becker® MAP PILOT then attemptsto calculate a diversion.> In the My Route menu, select Block

road.

> You can now select between Block roadahead, Block area and Clear block-ings.

Block road ahead

> In the My Route menu, select Blockroad.

> Select Block road ahead.

> Select to select the desired length ofthe block.

> Select to select the start of the block.> Select to activate the block.The blocking is activated and the systemperforms a route recalculation.

Block an area

> In the My Route menu, select Blockroad.

> Select Block area.The map appears with a rectangle thatshows area to be blocked.

> Search for the desired blocking area.

> Press the rotary control/push button.

> Select Yes to block this area.The blocking is activated and the systemshould not use this area for future routecalculations.

Note:The selected length of the block is onlyan approximation since the actual dis-tance blocked depends on the availabilityof an exit.

Note:You can block up to 10 areas.

1

2

3

1

2

3

Note:Turn the rotary control/push button tochange the scale of the map display.Push the rotary control/push button tomove the displayed rectangle to the de-sired position.

43

>>> NAVIGATION MODE

> USE

> FR

> ES

Clearing a blocked route or areaYou can clear the blocking of a road aheador an area.> In the My Route menu, select Block

road.> Select Clear blockings.

> Select Clear all blockings to clear allblockings.

or> Select Clear distance blocking ahead

to clear the active blocking of the roadahead.

or

> Select Clear area blocking to clear anarea blocking.

> Select to scroll through the blockedareas.

> Select Clear area blocking to delete thedesired area blocking.

Map displayYou can select whether the map is to bedisplayed in 3D or 2D mode, in a splitscreen with 3D or 2D display or in arrowmode.In addition, you can adjust in 3D modethe viewing angle of the map and specifywhether or not 3D models of buildingsand 3D landmarks should be displayed.

> Select Map in the map toolbox.

> Select with Full map, Map with Turn-By-Turn, Split screen or Turn-By-Turnthe basic display.

> Select with 2D or 3D the mode of themap display.

1 1

1

44

NAVIGATION MODE >>>

> USE

> FR

> ES

> For 3D mode, select whether or not 3Dplaces of interest available should be dis-played (yes or no ) with 3D-Landmarks. The display of the modelsof buildings is switched on and off si-multaneously.

> For 2D mode, select whether the mapshould always be orientated to the di-rection of travel ( ) or to the north( ) with Heading up.

> Switch Autozoom on or off with Autozoom.

> For 3D mode, select Map tilt angle toset the viewing angle of the map.

> Select between the viewing angles High-er, Normal and Lower.

> Confirm your settings by selectingDone.

Position displayYou can display your current position andstore this position. You can also displayinformation concerning the current GPSreception and the current country.

> Select Information in the map toolbox.

The current position is displayed. If possi-ble, an address is displayed. If no addressis available for the current position, thegeographical coordinates are displayed.If route guidance is active, the destinationaddress and any stopover addresses arealso displayed.You can return to the map using Resumeguidance (with active route guidance) orReturn to map.Push the rotary control/push button tothe right for further control options.

By selecting Save you can store your cur-rent position in the last destinations.By selecting Country-Info you can displaycountry-specific information such as themaximum permitted speed for the coun-try you are currently in.

By selecting GPS-Info you can view infor-mation regarding the GPS reception.

You can see how many satellites are beingreceived, and whether the satellite recep-tion is good enough for navigation. Thecurrent time and the geographical posi-tion are also displayed.

45

>>> NAVIGATION MODE

> USE

> FR

> ES

Repeating an announcementWhen route guidance is active, you can re-quest a current announcement or repeatthe last announcement.> Select Repeat in the map toolbox.

46

SETTINGS >>>

> USE

> FR

> ES

SettingsTo call up the settings, select Settingsfrom the main menu.

The Settings menu appears.You can now select from the following set-tings:• Guidance settings

Settings relating to the route guidance

• Map settingsSettings relating to the map display

• TMC settingsSettings relating to the receiving of TMC messages

• System settingsBasic settings relating to the Becker® MAP PILOT

Route guidance settingsThe route guidance settings contain thesettings that are relevant to route guid-ance.> In the settings menu, select Guidance

settings.

The route guidance settings are displayed.

Route optionsYou can set your driving profile. The set-tings made here have an effect on theroute selection and on the calculation ofthe estimated journey times.> Select Route options in the route guid-

ance settings.

> With select your mode of travel(Unhurried, Normal and Sporting).

This setting influences the calculation ofyour estimated time of arrival.

> With select one of the following op-tions.

Option MeaningEconomical With this option, the

most economical route in terms of travel time and mileage is calculated tak-ing into consideration further parameters such as gradients, for example.

fast With this option, the fastest route in terms of travel time is calculated.

1

2

3

4

1

2

47

>>> SETTINGS

> USE

> FR

> ES > Select to exclude various types ofroad (e.g. freeways, ferries and tollroads) from the route calculation.

You can now select either Allow undAvoid for each type of road.

> With select whether historical traf-fic data is to be included when calculat-ing the route.

If this function is switched on (Yes), sta-tistical information on the possible speedon certain segments at certain times of theday is also taken into account in the routecalculation, provided this is available.This provides a more accurately calculatedarrival time and may even result in a dif-ferent route being selected.

> Confirm your settings by selectingDone.

Reality viewWhen this function is enabled, you willsee realistic views (if available) of the cur-rent lane situation, at many freeway inter-sections and freeway exits.> Select Reality view in the route guid-

ance settings.> Switch the function on or off .

SignpostsWhen this function is enabled, you willreceive information (if available) at free-way intersections and other roads regard-ing the road signs which you should fol-low.> Select Signposts in the route guidance

settings.> Switch the function on or off .

Lane recommendationsWhen this function is enabled, you are in-structed as to which lane you should moveinto in the case of multi-lane roads.> Select Lane recommendations in the

route guidance settings.> Switch the function on or off .

Short With this option, the shortest route in terms of mileage is calculated.

Note: For freeways the selection Prefer is alsoavailable.

Option Meaning

3

4

48

SETTINGS >>>

> USE

> FR

> ES

AnnouncementsYou can specify whether street names areto be announced and whether the updatedtime of arrival is to be announced.

> Select Announcements in the routeguidance settings.

> Switch the desired function on oroff .

Map settingsThe map settings contain the settings thatare relevant to the map display.> In the settings menu, select Map set-

tings.

The map settings are displayed.

AutozoomYou can select how the map changes whenapproaching an action point or at differ-ent speed.> Select Autozoom in the map settings.

> Switch Autozoom on or off with Autozoom.

After selecting Advanced you can specifyhow strong the Autozoom action is to be.

POIs on the mapYou can select which POI symbols are tobe displayed on the map.> Select POIs on map in the map settings.

> Switch display of the POIs on or off with Show POIs.

Note: This function is not available for all lan-guages/voices. If the function is not avail-able, the function cannot be selected.

49

>>> SETTINGS

> USE

> FR

> ES

After selecting Advanced you can specifywhether all POI symbols or only a set ofPOI symbols selected by you are to be dis-played on the map.

Speed limitsYou can select whether speed limits aredisplayed in parallel to the navigation.You can also receive an audible warningabout exceeding the speed limit.> Select Speed limits in the map settings.

> Switch the speed limits on or off with Speed limits.

After selecting Advanced you can specifywhether speed limits are only to be dis-played if the limit is exceeded or alwaysdisplayed. You can also set the minimumspeed at which you would like to receive awarning if the limit is exceeded.

Driver alertsYou can have signs displayed, e.g. for dan-gerous curves or steep gradients, providedthis information is stored in the map data.

> Select Driver alerts in the map settings.> Switch the warnings on or off

with Driver alerts.After selecting Advanced you can specifywhich categories of warnings should bedisplayed.

WARNINGRisk of accident.The speed limit information in the mapdata may be incorrect as a result of short-term changes (road works, for example).The traffic situation and the local roadsigns take precedence over the navigationsystem information.

50

SETTINGS >>>

> USE

> FR

> ES

TMC settingsYou can make settings for the receptionand processing of TMC traffic announce-ments.> In the settings menu, select TMC set-

tings.

> With select whether traffic an-nouncements are to be taken into ac-count Automatically, Manually orNever.

> Select Advanced to make additionalsettings.

> With specify whether new TMCmessages are to be read out automatical-ly (on or off ).

> With tune to the desired TMC sta-tion.

System settingsYou can change various basic settings forthe Becker® MAP PILOT.> In the settings menu, select System set-

tings.

The system settings are displayed.

LanguageYou can set the menu language and thelanguage for the navigation announce-ments.> Select Language in the system settings.> Select the desired language.For some languages now the voice selec-tion (e.g. male and female voices) will bedisplayed.> Select the desired voice.

1

1

1

22

1

2

51

>>> SETTINGS

> USE

> FR

> ES

Design variantsYou can select between two different de-sign variants for the display of the dayskin.> Select Design variants in the system

settings.> Select the desired variant.

Pin protectionYou can create a freely definable securitycode of between 4 and 10 digits in lengthand enable/disable this security code.

> Select PIN protection in the system set-tings.

> Select Enable PIN to enable a securitycode.

> Enter the desired security code and con-firm your entry with .

> Enter the security code again and con-firm your entry with .

The security code is now enabled.

Select Disable PIN to disable a securitycode.> Enter the correct security code and con-

firm your entry with .The security code is now disabled.

Map update reminderYou can turn off the automatic reminderfor a map update.> Select Map update reminder in the sys-

tem settings.> Switch the automatic reminder on

or off .

InformationThe following selection displays informa-tion regarding the Becker® MAP PILOT.> Select Information in the system set-

tings.The information display appears.Always quote these details in enquiries tothe service.Map data versions displays informationrelating to the installed map data.

Note:When a security code is entered, yourBecker® MAP PILOT is linked withyour vehicle by means of this securitycode. If your Becker® MAP PILOT is tobe used in a different vehicle, the securitycode must be entered.For the entry or change of the securitycode, the ignition of the vehicle must beturned on.

52

SETTINGS >>>

> USE

> FR

> ES

Factory resetYou can reset your Becker® MAP PILOTto the factory settings.All settings apart from the language are re-set to their factory settings. The last desti-nations and your home address are alsodeleted.> Select Factory reset in the system set-

tings.> Select Yes.The Becker® MAP PILOT is reset to thefactory settings.

53

>>> GLOSSARY

> USE

> FR

> ES

GlossaryGMT(Greenwich Mean Time) Central Europe-an timeStandard time at degree of longitude 0(the degree of longitude through Green-wich, Great Britain). This time is used allover the world as the standard time forsynchronizing data acquisition.

GPS(Global Positioning System) GPS usessatellites to calculate your current geo-graphical position. It is based on a total of24 satellites orbiting the Earth and emit-ting signals. A GPS receiver receives thesesignals and uses the signal time differencesto calculate the distance to an individualsatellite and thus the current geographicalposition (longitude and latitude). Signalsfrom at least three satellites are requiredfor positioning. The current height canalso be calculated if signals are receivedfrom four or more satellites.

PTT(Push To Talk)For this unit it means that after a selectionof PTT a address can be spoken. The ad-dress is then processed by the navigationsystem.

SD card(Secure Digital)The SD card was developed in 2001 bySanDisk and is based on the older MMCstandard. An SD card is a rewriteable re-movable memory card.

TMC(Traffic Message Channel)Traffic announcements transmitted bymost FM stations via RDS. Basis for dy-namic navigation.

USB(Universal Serial Bus) The Universal Seri-al Bus (USB) is a bus system for connect-ing a computer to external USB peripher-als for exchanging data.There are two different standards withvarious transmission speeds. USB 1.1transfers at a speed of 12 Mbit/s and USB2.0 transfers at 480 Mbit/s.For a transfer of large amounts of data de-vices that use the USB 2.0 standardshould be used.

54

INDEX >>>

> USE

> FR

> ES

Numerics3D display . . . . . . . . . . . . . . . . . . . . .43

AAlternative routes . . . . . . . . . . . . . . . .24

BBlocking . . . . . . . . . . . . . . . . . . . . . .42Blocking a route . . . . . . . . . . . . . . . .42

CContent Manager Becker® MAP PILOT . . . . . . . . . . . . . . . . . . .15

Installing . . . . . . . . . . . . . . . . . .15Starting . . . . . . . . . . . . . . . . . . .16

Coordinate entry . . . . . . . . . . . . . . . .29Current position . . . . . . . . . . . . . . . .44

DDestination from map . . . . . . . . . . . .29Destination input . . . . . . . . . . . . . . .20Destination input menu . . . . . . . . . .20Destination list . . . . . . . . . . . . . . . . .18Destinations

Entering . . . . . . . . . . . . . . . . . . .20Storing . . . . . . . . . . . . . . . . . . . .24

Displaying the route . . . . . . . . . .24, 40

EEconomical route . . . . . . . . . . . . . . . .46Entering a city . . . . . . . . . . . . . . . . . .22Entering an address . . . . . . . . . . . . . .21Entering an address using speech . . . .25

FFast access mode . . . . . . . . . . . . . . . .18Fast route . . . . . . . . . . . . . . . . . . . . . .46Ferries . . . . . . . . . . . . . . . . . . . . . . . .47Freeways . . . . . . . . . . . . . . . . . . . . . .47

GGeographical coordinates . . . . . . . . . .29GMT . . . . . . . . . . . . . . . . . . . . . . . . .53GPS . . . . . . . . . . . . . . . . . . . . . . . . . .53GPS reception . . . . . . . . . . . . . . . . . .44

HHome address . . . . . . . . . . . . . . . . . .19House number . . . . . . . . . . . . . . . . . .23

IInput lock . . . . . . . . . . . . . . . . . . . . .13Intended use . . . . . . . . . . . . . . . . . . . .4Intersection . . . . . . . . . . . . . . . . . . . .23

LLast destinations . . . . . . . . . . . . . . . .18

MMain menu . . . . . . . . . . . . . . . . . . . .12Map

Displaying . . . . . . . . . . . . . . . . .35Zooming in . . . . . . . . . . . . . . . .38Zooming out . . . . . . . . . . . . . . .38

Map display . . . . . . . . . . . . . . . . . . . .35Map settings . . . . . . . . . . . . . . . . . . .48Memory card . . . . . . . . . . . . . . . . . . .10

NNavigation . . . . . . . . . . . . . . . . . . . . .17

Canceling . . . . . . . . . . . . . . . . . .38Starting . . . . . . . . . . . . . . . . . . . .25

New destination . . . . . . . . . . . . . . . .20

PPoints of interest

Entered directly by name . . . . . .28Entered directly by phone number . . . . . . . . . . . . . . . . . . . .29Near address . . . . . . . . . . . . . . . .28Near destination . . . . . . . . . . . . .27Nearby . . . . . . . . . . . . . . . . . . . .27On the route . . . . . . . . . . . . . . . .41

Index

55

>>> INDEX

> USE

> FR

> ES

RRestrictions

Ferries . . . . . . . . . . . . . . . . . . . . 47Freeways . . . . . . . . . . . . . . . . . . 47Toll roads . . . . . . . . . . . . . . . . . 47

Route guidanceCanceling . . . . . . . . . . . . . . . . . 38Starting . . . . . . . . . . . . . . . . . . . 25

Route guidance settings . . . . . . . . . . 46Route options . . . . . . . . . . . . . . . 39, 46Route planning . . . . . . . . . . . . . 20, 30

SSafety information . . . . . . . . . . . . . . . 4Safety instructions . . . . . . . . . . . . . . 17Satellites . . . . . . . . . . . . . . . . . . . . . . 44SD card . . . . . . . . . . . . . . . . . . . . . . 10Selecting a city . . . . . . . . . . . . . . . . . 22Selecting a country . . . . . . . . . . . . . . 21Selecting a destination

Entering an address . . . . . . . . . . 21Selecting a state/province . . . . . . . . . 21Selecting the street . . . . . . . . . . . . . . 22Setting the map display . . . . . . . . . . 43Settings

Map . . . . . . . . . . . . . . . . . . . . . 48Route guidance . . . . . . . . . . . . . 46System . . . . . . . . . . . . . . . . . . . 50TMC . . . . . . . . . . . . . . . . . . . . 50

Short route . . . . . . . . . . . . . . . . . . . . 47Stopover

Deleting . . . . . . . . . . . . . . . . . . 39Entering . . . . . . . . . . . . . . . . . . 39

System settings . . . . . . . . . . . . . . . . . 50

TTMC . . . . . . . . . . . . . . . . . . . . . . . . 32

On the route . . . . . . . . . . . . . . . 40Recalculating routes . . . . . . . . . 34

TMC settings . . . . . . . . . . . . . . . . . . 50Toll roads . . . . . . . . . . . . . . . . . . . . . 47

UUSB . . . . . . . . . . . . . . . . . . . . . . . . . 53

VVoice entry . . . . . . . . . . . . . . . . . . . . 25

56

NOTICE >>>

> USE

> FR

> ES

NOTICE

FCC InformationThis device complies with the Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.

The type approvalIn conformance with current EC guidelines, any person may operate this unit. This unit con-forms to the current valid European or harmonised national standards. This designation isyour guarantee that the unit conforms to the applicable specifications regarding electromag-netic compatibility. This means that interference with other electrical/electronic devicescaused by the unit, or interference with this unit caused by other electrical/electronic devicesis largely prevented.

The EC type approval mark (E13) issued by the Luxembourg's vehicle licensing authority in accordance with European Directive ECE-R10 governing the EMC of motor vehicles in its current version authorizes installation and operation of the unit in motor vehicles (classes L, M, N and O).

57

>>> NOTICE

> USE

> FR

> ES

CE declaration of conformityHarman/Becker Automotive Systems GmbH declares herewith that the Becker® MAPPILOT conforms to the basic requirements of applicable EC regulations and especially to thebasic requirements and other relevant regulations of the R&TTE directive 1999/5/EC.

A detailed CE declaration of conformity for the product is available on our Internet site http://www.beckermappilot.com under “Downloads”.

DisposalCustomer information on the disposal of electrical and electronic devices(private households)In accordance with the self-imposed principles of Harman/Becker Automotive Systems Gm-bH, its product was developed and made from high-quality, recyclable materials and compo-nents.This symbol on the product and/or accompanying documents means that at the end of theirlife electrical and electronic products must be disposed of separately from domestic waste.Please take these products to communal collecting points or recycling centres for processingand salvage of materials. The units will be accepted there free of charge.The proper disposal of this product helps protect the environment and prevents harmful ef-fects on humans and the environment, which could result from improper handling.More detailed information on the nearest collecting point or the nearest recycling centre canbe obtained from your local authority.

For commercial customers in the European UnionPlease contact your dealer or supplier if you would like to dispose of this electrical/electronicequipment.

Information on disposal in countries outside of the European UnionThis symbol is only valid within the European Union.

58

NOTICE >>>

> USE

> FR

> ES

Disposal of the battery

Duty to supply information according to battery legislation (BattV)Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of batteriesvia specialised dealers or at battery collection points. In this way, you make a positive contribution to environmental protection.Since 1998, German battery legislation obligates all citizens to dispose of used batteries exclusively via retail outlets or at collectionpoints specially equipped for this purpose (statutory obligation to return). It is the duty of retail outlets and manufacturers to takeback these batteries free of charge and to correctly recycle them or to dispose of them as hazardous waste (statutory obligation to takeback). If you wish to return your batteries to us, please send them, with adequate postage, to the following address:

Harman/Becker Automotive Systems GmbH- Battery recycling - Becker-Göring-Str. 16D- 76307 Karlsbad- Ittersbach

The lithium ion battery in the Becker® MAP PILOT is marked with the adjacent symbol,consisting of a crossed-out waste bin, and the type of battery used.

Removing the batteryBefore you hand in your old unit for disposal, the battery must first be removed.

Note:You should only remove the battery if your unit is obsolete and is to be handed in for disposal.

Lithium ion

59

>>> NOTICE

> USE

> FR

> ES

> Completely discharge the battery.> Press the battery cover on the underside of the unit lightly and push the battery cover in the direction of the arrow.> Lift the battery by the tab .> Remove the battery .

Note:Do not reconnect a unit that you have opened to the power supply.

1

2

3

1

2 3

2