many good reasons for mechanical engineers to choose io-link
TRANSCRIPT
16
Many good reasonsfor mechanical engineers
to choose IO-Link.
ww
w.if
m.c
om
/gb
/io
-lin
kIn
du
stri
al c
om
mu
nic
atio
n
years
W
ARRANTY
on ifm products
Gesamtkatalog EN 2015_Stilvorlage LK FrutigerOT_2010 DE_GB.qxd 17.11.14 12:50 Seite 3
I
IO-Link inmechanical engineering.
PLC and fieldbus neutral.
Simplicity
Easy set-up.
Connect sensors or actuators.
Parameter setting for machine adjustment.
Flexible remote parameter setting.
Automatic parameter management.
The benefits of IO-Link...
Parametersetting
ProfibusProfinet
Ethernet IP
II
No matter which PLC the end user would liketo use: The communication with the sensorwill always be as easy as it is.
IO-Link ports can be configured as inputsor outputs.So, sensors as well as actuators can beused alike.
Quick plant set-up due to centralisedsensor parameter setting.
Automated sensor parameter settingif recipes are changed.
Worldwide teleservice possible.
Centralised generation, storage andduplication of machine parameters is possible.This saves time and ensures reliability.
...and your advantage with ifm.
SPS
III
IO-Link inmechanical engineering.
Sensor data, diagnosticand machine data.
Measurement
Reduction of sensor versions.
Standardisation
Digital data transmission.
ifm offers IO-Link at no extra cost.
Standards.
The benefits of IO-Link...
000101000111100101000000100001010101000100001111001010110001
IV
Long-term data evaluation enablestargeted servicing.
Transfer of measured values (EMC) is moreimmune to interference in comparison toanalogue transfer. No conversion losses.
Only one sensor both for switchpoints and measured values.
IO-Link interface is a standard in ifm sensors.
Investment security for the future:IO-Link replaces proprietary systems.
...and your advantage with ifm.
barbar
V
IO-Link inmechanical engineering.
Standard connection cables(e.g. M12, M8, unscreened).
Wiring
Unambiguous device identification,verified device replacement.
Verification
“3 instead of 19”: Fewer terminals needed.
Different measured values from one sensor.
The benefits of IO-Link...
°C
m3/h
VI
Reduction of cable costs by 25 % usingunscreened M12 and M8 cables.
3-pole connection for 16 I/O points.Cost savings due to lower planning andwiring complexity.
Reduction of analogue input cards, terminals,cabling. Expensive multipole connectors arenot necessary.
It is ensured that the customer only usesoriginal spare parts.
...and your advantage with ifm.
-25%
IO-Link –the path towards industry 4.0
TCP/IP
Machineinfrastructure
IT infrastructure
IO-Link master
Modbus-TCP
Learn more?
Go to
www.ifm.com/gb/io-link
PLC
Visit our website:
www.ifm.com
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-mail [email protected]
Over 70 locations worldwide –at a glance at www.ifm.com
Position sensors
Sensors formotion control
Industrial imaging
Safety technology
Process sensors
Condition monitoringsystems
Industrialcommunication
Identification systems
Systems formobile machines
Connectiontechnology
Overviewifm product range:
Accessories
ifm a
rtic
le n
o. 7
8001
663
· We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
· Pr
inte
d in
Ger
man
y on
non
-chl
orin
e bl
each
ed p
aper
. 08
/15