8/8/2019 Manual TX-SR507 Quick Setup English

http://slidepdf.com/reader/full/manual-tx-sr507-quick-setup-english 1/2

Front

Left

Surround

Left

Surround

Back Left

Surround

Back Right

Surround

RightListener

TV

Sub

woofer

Front

RightCenter

Front

Left

Surround

Left

Surround

Back Left

Surround

Back Right

Surround

RightListener

TV

Front

RightCenter

Sub

woofer

Speaker Layout (Main Room) 

5/8''(15mm)

1/2''-5/8'' (12-15mm)

Surround rightspeaker

Surround leftspeaker

Surround backleft speaker

Surround backright speaker

Poweredsubwoofer

Front leftspeaker

Front rightspeaker

Centerspeaker

SN 29400007(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.

See the other side of this sheet for the AV component hookup.

Thank you for purchasing this product.This quick setup sheet shows the typical hookup method for connectingspeakers and AV components (DVD player, TV, cable/satellite receiver).For more detailed hookup information and operating instructions,please see the Instruction Manual.

QUICK SETUPModel :  TX-SR577 

*   2   9   4   0   0   0

Speaker Hookup 

8/8/2019 Manual TX-SR507 Quick Setup English

http://slidepdf.com/reader/full/manual-tx-sr507-quick-setup-english 2/2

TVVIDEO 1

IN

Cable/ satelliteVIDEOOUT

AUDIOOUT

L

R

Antenna input(e.g..RF IN)

DVD/BDplayer

VIDEOOUT

AUDIOOUT

DIGITALOUT

COAXIAL L

R

COAXIAL

DIGITALOUT

TV

HDMIIN

HDMIOUT Antenna input

(e.g., RF IN)

Cable/satellite

HDMIOUT DVD/BD player

AV Component Hookup

IF NO HDMI

See the other side of this sheet for the Speaker hookup.

If your TV or player doesn’t support HDMI, use the analog or digital

connections shown below.

Please ensure the monitor input

(VIDEO 1, VIDEO 2, VIDEO 3, etc.)selected corresponds to actualconnection used.

Coaxial feed fromTV antenna

If you are not using

Cable/satellite box,

please refer to the

instruction manual.

Assigning the Digital Input

If there’s no sound, you’ll need to assign thedigital inputs as necessary using the setup

menus on the AV receiver’s display.If you connect your DVD/BD player to the AVreceiver’s DIGITAL IN COAXIAL 1, and yourcable/satellite receiver to the DIGITAL INCOAXIAL 2, as shown, it’s not necessary toassign the digital input.

On the front panelAssigning the HDMI Input

If you connect a video component to anHDMI input, you must assign that HDMI

Input to an input selector in Setup.If you make the same connections as shownhere, you must assign the “DVD/BD” settingto “HDMI 1”, and assign the “CBL/SAT”setting to “HDMI 3”.

On the front panel

With an HDMI cable you can send both audio and video with a single cable,

making connecting simple and keeping wires neat.

If you have an HDMI-compatible TV and players, you can connect them

to the AV receiver with HDMI cables. Digital audio signals received

at HDMI IN input are output by the speakers and headphones connected

to the AV receiver.

Coaxial feed fromTV antenna

If you are not using

Cable/satellite box,

please refer to theinstruction manual.