18020194-connection instruction repeater panel 092014...iris fire alarm panel rx rx rx rx tx tx tx...
TRANSCRIPT
Rx RxTx Tx
Module 1Redundant Network
Module 2Redundant Network
IRIS Fire Alarm Panel
Rx
Rx
Rx
Rx
Tx TxTx Tx
+ Tx
+ Rx+ Rx
- Tx
- Tx
- Rx
- Rx
+ Tx
18
02
01
94
Repeater Panel - Instruction Manual
Technical Characteristics:Power Supply: (24 ± 4) VDCMax. consumption: 0.11ACommunication - RS485
Twisted pair cable:- Length - max. 1000m (between repeater - fire panel)
2- Cross Section - 0.5 - 2.5mm
2. Connection Diagram
ATTENTION!Operation with Repeater Panelis supported for the following revisions:
IRIS Fire Alarm PanelLCD PCB Hardware revision: 2.4 and higherMAIN Board Firmware revision: 4.2 and higher
SIMPO Fire Alarm PanelMAIN Board Firmware revision: 2.8 and higher
1. Description of the terminal rows
24 VDC
Loop IN Loop OUT Power Supply
Loop IN - Connect the input line for communicationLoop OUT - Connect the output line for communicationPower Supply - Power supply for the repeater panel: - Use external 24VDC power supply unit; - Use the AUX output of the fire alarm panel.Micro USB - Micro USB input for programming and firmware update
SIMPO Fire Alarm Panel
Micro USB
Repeater Panel
Rx
Rx
Tx Tx