manual panasonic kxt1232db

7/21/2019 Manual Panasonic KXT1232DB

1/52

ELECTRONICODULAR WITCHINGYSTEMKX-T1321 DB/KX-T1321 D

Please ead his Manual irstand hen another nstallation anual orprogramming.

This manual savailableor KX-T123210DB/KX-T12321 0Dhichhavethe mark J on the plateas shown below.

1. Use he "STOFIE"key nslead f'MEI\ORY"key, or KX-T7020, 030.7050 and7130do not have he"MEMORY"key.

2. Use he "AUTOANSWER"key nstead f "AUTOANS" key, or KX-T7020,030,7050and 7130do not have he"AUTOANS" key.

3. For he Features fFlexible ev s. efer o this manual.

4. Extension fack

number01 shouldbe connectedo KX-T7030, 130,30830,61630,123230, 23230D nd123235, otprogrammingystemdata.5. All theprogramming roceduresescribedn the Installation a nualhavebeen

modified.Delete he step 2 "Pressthe NEXT buon" from every feature of theprogrammingnanother nstallation anual.For he further eta|, ee page4 ofthis manual.Ths manual describes he revisedproceduresrom which the step 2has already been deleted.

Note:

Panasonic EASA-PHoNEMoDELo. KX-T12321OO8


2/52

SystemComponent

odd tlo. Dscipton

Servceunit KX-T123210D8/KX-T123210D

Electronrc odularSwrlchino vslem

Telephone KX-r7020KX-T7030KX-T7050KX-T7130KX.r123220KX-r123230KX-T123230DKX,T123235KX-T123250

EMSSProprietary elephone12CO's)EMSSProprietaryelephone ith LCD(12COs)EMSSProprietary elephone12CO's)EMSSPropretaryelephone ith LCD(12COs)EMSSProprietary elephone12CO's)EMSSPropretaryelephone ith LCD(12COs)EMSSProprietary elephone ithLCD(12CO s)EMSSProprietary elephoneith LCD(12CO s)EMSSProprietary elephone12COs)

KX-T61620KX-T61630KX-T61650KX-T30820KX-T30830KX-T30850

EMSSProprietaryelephone6CO's)EMSSProprietaryelephoneithLCD6CO's)EMSSProprietaryelephone6CO's)EMSSProprietaryelephone3CO's)EMSSProprietaryelephoneithLCD3CO's, DSS'S)EMSSProprietaryelephone3CO's)

Optionalequipment

KX-T7040KX-r123240KX-T61640

DSSConsole 32 DSSs,DSSConsole 32 DSS's,DSS Console16 DSS'S

16 Featureuttons)'16Featureuttons)

16 Featureuttons)

KX-T123241

KX-T123270KX-T123271KX-T123280KX-T123281KX-T123285KX-T1232868KX-T123291KX-T123292KX-T123295KX-T123296

DSSConsoleCard

Expansion ard(up o eightextensionines)Expansion ard(up o lourextensionines)Expanson ard(up o fourCO lines)Expansion ard(up o two CO lines)Olf PremiseExtension ardOff PremiseExtension nitDrect nwardSystemAccessCardDirect nwardSystemAccessOutgoingMessageCardDiagnostic ardMODENar d

KX-T30860KX-T30865KX-T30890KX-4202KX-4203KX.42O4KX.42O5KX.A26

Doorphone daptorDoorphoneHeadsetCord or CO linesClipTerminalor COlinesCable or extensioninesClipTerminalor extensioninesBatteryAdaptor


3/52

TABLEOF CONTENTSExarnple f Programming

AddedFeatures(Connection)

The Parallel onnection l theProprietary elephoneand he Standard elephone

(Program)

StandardelephoneonnectionitfiPropretaryelephone................. . . . . . . .8

I'10

1 01 1

1 l

ChangedFeatures(Program)

B u s y o n e . . . . . . . . . . . . . . . . . . . . . . . . . .2

Tol lRestr ic t ion. . . . . . . . . . . . . . . . . .3

Toll Restrctionf SyslemSpeedDra ng- BoundaryClassAssgnmenl .................4

Tr a r s f eR e c a l lr m e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

(Detailed eature)

F3-FWD/DNDButton Selection

Cancelled eatures

23

24


4/52

All theprogrammingrocedures escribedn the Installationvlanual avebeen modified. eletehe step2: "Pressthe NEXTbutton" romevery eature f theprogrammingn another nstallation\anual. ee he example elow theportionha tshouldbe deleted s shownshaded.This manualdescribeshe revised roceduresromwhich hestep2 has already eendeleted, s "Revison"below.

Or9nal Fevson

AB- t. o speedaccess ode 00

s @: speedaccess ode 99

CD: E E: access umber fTrunkGroup:

E E: access umber fTrunkGroup

t01tNEXfl[AB]lCDllphoneumbedlMEMORYlIEND]+r- reFl traTl

AB: [d ld: speedaccess odeoo

E E: speedaccess ode99

CD: I tr:access umberfTrunkGroup

B B:access umberfTrunkGroup

[01][ABl[CDlIphoneumberllMMOFY][ED] . ' r I

Dial 01 or press he AUTO button.will be

"SpeedNO?* " will be displayed.

Dial 00 hrough99) orpress he NEXTbutton.or speedaccess cooe enrry.

Enterautomaticine accessnumberor trunkgroupnumber.

Enter hephonenumber.Press he MEMORYbutton.The memory nd icator ill belit.

aTo advance o the nexl speedaccess ode,press heNEXTbutton.

aTo return o theprevious peedaccess ode,press hePREVbutton.

a To go to the desired speedaccess code, press theSELECT buttonand then dial the speedaccess code.

Repeat steps 4 to 7, toprogramhe otherphonenumbers.

To return o the initialrogrammingode,press he ENDbutton.

8.

o

Dial 0'1) r press he AUTO button."SpeedNO?* " willbe displayed.

Dial 00 hrough 9) orpress he NEXTbutton, or speedaccess code entry.

Enterautomaticineaccessnumberor trunkgroupnumber.

Enter hephonenumber.

Press he MEMOFIY utton.

The memoryndicator ill

belt.

afo advance o the nextspeedaccess ode, press heNEXTbutton.

aTo return o thepreviouspeedaccess ode,press hePREVbutton.

a To go to the desired peedaccess ode, press heSELECTbuttonand hen dial he speedaccess ode.

Repeat teps3 to 6, toprogramhe otherphonenumbers.

To returno the initialrogrammingode,press he EN Dbutton.


5/52

When heSystemProgramSwrtch n theKX-T123210s sel to thePROGRA,4osrion.he functionf the KX-T7030nd heKX-T7130onnectedo jacknumber01 will changeas lollows.

KX-T7030

f|---r r--r f-----rf---'1l

sroe

stECf

PFEY fL $ EO 'CXf

Overlay

KX-T7130

SECRET

E E E

- f E

r-=--'1L JGIf-;-lL : J

T--:---1L_gJE

CLEAR

PAUSESTORE/AUTOSELECT

[E :: fE::lE @@@

EE-;1L:J

sfoa

?RV F,43rl EXD 'IXT

SEtECa

Overlay


6/52

Added Features


7/52

IAnyextension an be connectedn parallelwith heproprietaryelephone nd he standardelephone.

I In the eventol a power ailure,CO1,CO2,CO5, CO6,COgand CO10can be accessed sing he standardtelephoneshat are connectedn parallel ithproprietaryelephoneso extenson s f acknumber01,02,09, 10, 17 and18 respectively.

I lf the extension eceives call,a ringingwill be heardfrom theproprietaryelephoneand lhe standardtelephone. ou can answerhe callby usingether heproprietaryelephone r the standardelephone.

I An answeringmachine, facsimle, MODE/(personal omputer) tc.can be connectednstead fthe standardelephone.

I You canprogramhat he slandard elephone illnotwork. Forprogramming,efer o the"Standard

TelephoneConnectionith Propnetary elephoneonpage8 in thsmanual.

Note:

aThe LCD on theproprietaryelephone illshowyou heslandard elephone s used.aThe followingeatureswill not work by he standard

telephone onnectedn parallel ith heproprietarytelephone.

Call splttingExternal eature accessAccount ode mputConferencePickupdialing

aThe standardelephone onnectedn parallelwith heproprietaryelephone an not makea call n thefollowng ases;- The proprietaryelephones set o BGI\mode.

The proprietaryelephones receivinghe pagingthrough he built-in-speak er.

- The proprietaryelephones set o PROGRAMMINGmode.

a Theslandard elephone onnectedn parallelwith heproprietaryelephone ill not ring n the following ases;- The proprietaryelephone s set o Automatc nswer-

Inlercom.- Thepropretaryelephones set o Voicealerting

mode.

2-conductor iring

4-conductorwrnng

ProprietaryelephoneKX-r123220KX-T123230KX-T123230D.. .XKX-T123235XKX-T123250KX-T61620KX-T61630KX-T61650KX-T7020KX-T7030KX-T7050KX-T7130.. . . .KX-T30830

KX-T30820KX-T30850

StandardTelephone

aThe modelsabovewhichhavea markXrequire he6-conductoriring.


8/52

@ ABFELEcnnirErrroRYp,

AB: trtttr:

: To assign he sameon al l 32 acknumbers:on jacknumber 1

p p : on act


9/52

;.^-l [r-rl fml ElIn--r ll r l l l ff i | l [ ] lL I l - l l . - r L I I M F M . F Y IPress Diall Dial he PressI\ESSAGE extension MEMORY

numoerwhioh Ssel newty(100 hrough199)

To Change nto DSSButton

Description

Allows he MESSAGE utton o change nto he DSS(DirectStationSelection) utlon.Theproprietaryelephones available.

Operation

a Be sure he handset s in the cradleand heSP-PHONEutton s off.

a Set he MEMORYwitchof theproprietaryelephonetO PFOGHAM".

1. Press he l'.4ESSAGEutton.

2. Dal1 .

3. Dial he extension umberwhch s setnewly(100 hrough 99) .

4. Press he MEMORYbutton.

To return to the MESSAGEbutton:

1. Press he MESSAGEutton.2. Dial(3).

3. Press he MEIORYbutton.

aAtter programminghe I\ESSAGE utton, eturnheMEMORYwitch o the"SET"position.

Descripton

Allows he MESSAGE utton o be usedas a one ouchdialing utton.Up to16 dgits an be storednto he MESSAGEutton.

Operation

a Be sure he handset s in the cradleand heSP-PHONE utlon s off.

a Set he MEMORYwitchof the proprietaryelephonetO PROGBAM".

1. Press he MESSAGE utton.

2. Dial(2).

3. Dial 9) .

aYou maydial81 through 8 instead l 9.9... Anextension an automaticallyelectan idle

linewithin he CO lineenable o call.

81 through 8...Anextenson an selecta trunkgroupdesignated.

4. Dialhe phonenumber.


To return to the MESSAGEbutton:

1. Press he MESSAGEutton.

2. Dial 3).


a Atterprogrammnghe MESSAGEbutton, returnheMEMORYwitcho the "SET"position.

ToChangentoOneTouchDalng utton

El tr^"il fil tmll r | I l l 2 l l l 9 l l H d l

l - l l - l | . - 1 IPress Dial 2 Diat 9" DralMESSAGE phone

numbet

Presst4E 40RY


10/52

fF51 --lLZ L-]JDia l 71" Dial.,, press

ot 2" MEI\oRY

f 1": orProgrammableealure-lL"2':forSAVE I

Description

The SAVE button s notprovidedwth KX-T30850,KX-T6150, KX-T'I23250, KX-T7020,KX-T7030andKX-T7050.The F1 buttoncan be changed romprogrammablefeaturebutton o the SAVE button.

diall mode ....programmableeature unctiondial2mode ....SAVE uncton

Operation

a Be sure he handset s in thecradleand heSP-PHONE utton s off.

aSet the MEMORYwitchof the proprietaryelephonetO"PBOGBAM".

1. Dial7) 1) .

Dial 1) or the programmableeaturebutton r dal(2) orthe SAVEbutton.

Press he MEMORYbutton.

a Afterprogramminghe Fl button, return he MEMORYswitch o the"SET"position.

Description

Theoperalion f MessageWaitngs partiallyhanged.Please orrect ton page4-37 n another nstallationmanuat.

Operation

To cancel lhe message at the extension wherethemessage is left.

1. Litt he handset r press he SP-PHONE utton.

2. Dal(700# )The NESSAGEndicator illgo out.All messagewillbe canceled.

3. Hangup orpress he SP-PHONE utton.

To cancel the message at the extension wherethemessage is left.

trEEtrLiflhandset Dial700+" Hang poror press pressSP.PHONE SP-PHONE

1 0


11/52

Setting

ffiift handset lFRq toPcpl-----lLZJ q]LlIDial 701" Dialextensionnumbef

E - EDial0"or"f"

Canceling a message

ffiift handset trmtrDial"702" Dialexlensionnumber B - ED i a l0 o r" f '

ang up

Hangup

Description

When he dialled ntercom xtensron busyor doesno tanswer, singleine elephonean also n form heextension f a receiv ing ign.Onlya telephone hichhas a MESSAGE utton anreceive he message.

Operation

Setting1. Liit he handset.

2 . Dial701) .

3, Dial he extenson umber

(100 hrough 99) .

4 . Dial0)or (#) .

5. Hangup .

Cancelnga message1. Lifl he handset.

2. Dial(702).

Dial he extension umber(100

hrough199).Dia l0 )or (# ) .

Hangup.

TheKX-T7020,030. 050and7130 anbe used orAutomatic edalnqf this eature.

Pressinghe TRANSFERutton s als o avalableochange the party o whom a call is transferredbeforenangrng p.Press he TRANSFER utton o retrieve hecall, hen

repeat he procedureol CallTransfer.Conditions

lf thecalledpartyis busy or does notanswer,youmayreturn o thecallngartyalso bypressinghe TRANSFERbutton.TransferRecallTime schanged rom"30seconds r 15seconds"o "30seconds r 2 mnutes".

4.

5.

' 11

TheKX-T7130anbe used or his eature.


12/52

ChangedFeatures

aBusyone s revised s ollowssee age -7 nanothernstallationanual):

1 2


13/52

The selective se of this eaturepermitseslrctedialing o specific tations. Classof Service an be assignedo aparticulartationwhichprohibitsr limits hat station's iali ng bility. he followingre he availableive Classes f Service.

TOLL RESTFICTION DENIEDCODETABLESERVICE TASS

1 2 4CLASS.2DENIEDCODE(20loctions) D D D D

CLASS-3OENIEDCODE(20locatons) D D D

CLASS.4OENIEDCOD(20loca:ions) D D

CLASS.sDNIEDCODE(20localios) D

TABLE.,1

TOLLRESTRICTIONEXCEPTIONALODE ABLE

A: CALL S ALLOWEDD: DENIEDOTHERTHAN

EXCEPTIONALODE

- : IGNORED

E: ENABLE

SERVICE LASS1 2 3 4

XCEPTONALODEl0rl*[051 E E E E

EXCEPTIONALODE106l*lol E E EEXCEPTIONALODE

t111-t1slE E

EXCEPTONALODElr6'l-l2ol E

TABLE.2x ECOS:ExtensionClassOf Service

SDBC:Speed DalBoundaryClass

1. Service lass1 will allowall calls.

2. Service lass2 wi ll deny20 codesprogrammeds a denied odeand allow20 codesprogrammeds an exceptionalode(location1-20).3. Service lass3 willdeny40 codesprogrammeds CLASS-2 nd CLASS-3 enied ode

and allow15 codesprogrammeds an exceptionalode location1-15).4. Service lass4 willdeny60 codesprogrammeds CLASS-2,CLASS-3 nd CLASS-4 eni ed ode

and allow 0 codesprogrammeds an exceptionalode location1-10).5. Service lass5 willdeny80 codesprogrammeds CLASS-2,CLASS-3,CLASS-4 nd CLASS-sdeniedcode

and allow5 codesprogrammeds an exceptionalode(location1-05).

The followinghouldbe set.a To I Festrictronf SystemSpeedDaling BoundarylassAssignment"n page14.a "TollRestriction DeniedCodeAssignment"n page 15 .a"TollFlestriction Exceptional odeAssignment" npage 16 .a "ServiceClassAssgnment f Toll Restriction"n page22 -

cLASS-2/3/4/5CHECKDENYCODETABLE

CHECKXCEP. ODE ABLE

1 3


14/52

until hedesired oundarylass ppears

CLASS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .efaul tCLASS2CLASS3CLASS4CLASS5

E tsEi-ECnrEMoVlNp-l

Description

You can select he boundaryclass which is free from thespeeddalngoll restricton.

Programming

Dial12)."BoundaryClass-1"illbedisplayednd 1 wllblnk.

Repeat ressnghe SELECTutton ntil he desiredclass umber ppears,r dial heclass umber(1 hrough ).

Press he MEMORY utton.TheLCDwillstopblinking.

To return o thenitalrogrammingode,press heENDbutton.

Conditons

lfyouset the boundary o CLASS 2, thesystemwillallow system speed dalngon servceclass 1 and class2. but restricton servceclass 3. class 4 and class 5accordn9 o the toll restrictionhecking.Refer opage 13 .

qpiom SpedDalingBqr:darv Class

1 2 3 4 5

ServiceClass

1

2 ait c c4 c c c5 c c c c

A:allowedC: checked

Programming able

See page 27.

3.

4 .

1 4


15/52

AB:E ClassE ctass3E classE class5

Phone umber ith7 digitsNothings stored...de faultall20memoryocations)

E @ EFGHUKIMEMoVlENplt.---------_ |ISELECT|-

--....-...ntil hedesired emoryocationumber ppears

Ene$fctrnftrovlEd

CD: E E : memoryocation1

@ @ : memoryocation 0

Description

For ServceClass2, 3, 4 or 5 (see "TollRestriction")up to 20phonenumbers an be selectedor usein tolldialing.Phonenumbers rogrammed llbe denied.Al lextensions rogrammedor ServiceClassSelectionsshallbe assigne d o the samedenied odeassgnmentplan.

Programming

1. .Dal (13)or class2.a Dial 14) or class3.a Dial 15) or class4.. Dal16) or class5.

"CodeNO?- " will be displayed.

2. Dial 01 hrough20) orpress he NEXTbutton.Example:Whendial(01)or press he NEXTbutton.a The LCDwllshow"01: ......"whennothngs

stored n memory ocation umber0'1".When hephonenumber212 ,


16/52

AB:EE: memoryocatron1:

@ @ , m"rotylocation0

Phonenumberwith 7digitsNothings stored . defaultall20 memory ocations)

E l+El DEFGH]rEMPqL[5el-eciH

EFEXT]EDEFGHiltrEMP]@

DescriptionThroughprogramming,he desired xtensions llbeallowedo dal he phonenumberswhich are restrictedby "DeniedCode Assgnment".orServiceClass2, 3, 4or 5 upto 20phonenumbers an be selected.

Programmingl . Dial17) .

"CodeNO?- " wll be displayed.

2. Dial(01 hrough20) orpress he NEXTbutton.Example:When dial(0'l or press he NEXTbutton.a The LCD will show"01: ..... . whennothngs

stored n memory ocation umber01".When hephonenumber1800 *x * has beenstored,01:1800xxx" wil lbe displayed.

3. Dial he 7-digithonenumber.a To erase a wrong entry,press the CLEAR button.

4. Press the MEI\ORYbutton.aThe MEMORYndcator llbe lt.

5. aTo advance o the nextmemory ocaton umber,press he NEXTbutton.

aTo return o theprevousmemory ocationumber,press he PREVbutton.

aTo go o a desired emoryocatonumber,resstheSELECT utton nddialhememoryocationnumber.

Repeat teps3 to 5.To returno the nitialrogrammingode, ressheENDbutton.

Conditionsa Each hone umberhouldonsist f 7 digits.a * substitutesora number.

Programmingable

5ee pagez.

I Applicable ange to Service Class

6.7.

ExcsotionalCode ServiceClass

0t02

a4

utt

101 fI't5

t or

20

t o


17/52

untilhe desired ime appears

30 sec.....default'I mr n1 . 5m i n2 min3 min4 mn5 mn6 minDisable

E Isi-ECn,t-EMoVlNp]

Descripton

When he handset f the holding xtension s replacedon call,youmay have he automatic old recallafter hedesired ime elapses. he hold ecall an beremoved radded.

Programming

1. Dial18) ."Time:30 sec" will be displayed nd"30sec" willbl ink.

2. Bepeatpressinghe SELECTbuttonuntil he desredtime sdisplayed.


The LCD willstop blinkng.4. To return o the initialrogrammingode,press he

ENDbutton.

1.5minutesEfSEi-ECnFt-EciltrEMoVlNpl

Programming able

See page28 .

1 7


18/52

E|seLEcaFEMoRVIENpI

untilhe desiredmodeappears

30 sec..... efault2 min

Description

lf a calls transferredo an extenson,nd he otherextensondoes not answer he transferredcall within 30seconds, he callwill return oyou.The timemay bechanged o 2 minutes.

Programming

1. Dial19) ."Time:30 sec" will bedisplayed ndthe "30sec" willbl ink.

2. Press he SELECT buttono alternatebetween"30

sec"and "2 min" o selecthe destredmode.

Press he MEI\ORY utton.TheLCDwillstopblinking.

To returno the nitialrogrammingode, ressheENDbutton.

Programmingable

See page28 .

3.

4.

' 18


19/52

a StopOutpul

untl esired atadumpmodeappearsA l l P a r a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . d e f a u l tSystemParaCO ParaEXT Para

DSS ParaSpeed DialStop Output

AB: trtrtr:

: toassgn he sameon al 12CO's: o n C O 0 1

[ p : o n c o 1 2

E FEIeanFEMoF@ trEMoRtlNl

trtrtrfit tt

;to assignhe same on all32 acknumbers: on acknumber01

:on jacknumber 2

E FELrca|ItleMotl fMEMoVlENp-l

a DSSParameter

4: ll : toassignhesame n att2 DSS'strtr

: o n D S S l

: o n D S S 2

E FeLEinFEMoRilfuEMoVlNp-l


20/52

Description (2) co parameters[40]CO Connection ssignment

Six separate rintoutsre avalable. [41]DialModeThey are (1)Systemparameters 2)CO parameters 3) [42]Puise Speed SelectionExtensionarameters4) DSSparameters5) Speed [43]HostPBXAccessCodesAssignment

dial and(6)Allparameters. [44]TrunkGroupAssignment[45]FlexibleOutwardDialingAssignment-Day(1) Sysfemparameters [46]FlexibleOutwardDialingAssignment-Night

[00]Dateand Time Settng [47]FlexibleRingng ssignmenl-Day[02]Extension umberAssignment [48]FlexibleRingingAssignment-Night[03]OperatorExtension [49]DelayedRingng ssignmenfDay[04]PairedTelephone ssignmentor DSS Console f50lDelayedRingingAssignment-Night[05]AutomaticCO TransferUsingDSSButton [51]CO Day \odeAssignment[06]Day/NghtServiceMode [52]CO Night [ode Assignment[07]DaylNight tarting ime [53]PauseTime Assignment[08]CallHunting [54]Hookswtch lashTiming[09]Hunting ype [55]CallingPartyControlSignal

[12]Toll Restrictionof System Speed Dialing [56]DisconnectTime

[13]Class-2DeniedCodeAssignment l57lAutomaticDesignated O LineAccess[14]Class-3DeniedCode Assignment (3) Extensonparameters[15]Class-4DenedCodeAssignment lType]Telephone ype[16]Class-sDeniedCodeAssignment [60]Extension roupAssignment[17]Exceptional odeAssgnment [61]ServiceClassAssignmentfToll Restriction-D ay[18]Hold RecallTimeSet [62]ServiceClassAssignment f Toll Fiestriction-Ng[19]TranslerRecallTime [63]Extension ame[20]CallForwardingStartingTime [64]AccountCode Input Mode[21]PickupDialDelayTme [65]CallTransfero Outside n e[22]CO-to-CODuration ime Lmit [66]Call FoMading o Outside ine[23]RS-232C CommunicationParameters [67]ExecutiveOverride[24]SMDR Parameters [68]Do not DisturbOverride[25] ncoming/Outgoingall Selectionor printing [69]Standard elephoneConnection ith Proprietary[26]SecretSpeedDial/One ouchDialPrinting Telephone[28]DurationimeCountStartMode [PFiFeatureButton[29]ExternalPagngAccess Tone [CO]FlexibleKey[30]DTMFReceiverSelection [M\M]FlexibleMWKey[31]Direct nwardSystemAccess[32]OtfPremiseExtension a lf KX-T30850s connected o an extenson,CO][33]Off HookCallAnnouncement FlexibleKeys 01through12 show he following[44]TrunkGroupAssignment buttonassignment.[70]Day Door-Phone [CO]01 COl [CO]08 DSS4[71]NightDoor-Phone [CO]02 CO2 [CO]09 DSSS

[co]03 co3 [co]10.. DSS6

lcol05 Dssl [co]11.DSST[co]06 . Dss2 tcol12 . DssS

lcol07 . DSS3

20


21/52

(4) DSS ConsoleparameterslPair]Pair Extension o.lDSlDSS ButtonAssignments[PF]ProgrammableeatureButton

(5) Speed Dial[01]SystemSpeedDialingEntrySpeedaccess odes 00 hrough 9) n whichphonenumbers re storedmay be printed.

(6) AllparametersSystemparametersCO parametersExtensionparametersDSSparametersSpeedDial

OperatonTo stop the prntout;

1 . Dial27) .

2. Repeatpressnghe SELECTbuttonuntil"StopOutput"s displayed.

3. Press he MENORY utton.

To prntSystem Parameters,Speed Dialor Al lParameters;

1. Diat127)."N4enu:All Para"will be displayed nd"AllPara"will

bl ink.2. Repeatpressinghe SELECTbuttonuntil he desired

datadump mode s displayed.

3. Press the MEI\ORYbutton.SMDBprinterwillprintout.

4. Repeat teps2 to 3. toprinthe otherdata dumps.

To prntCO Paramelers;1. Dial27).

2. Repeat ressingheSELECT uttonntilthe "COPara" s displayed.

Press he MEI\ORYbutton." C O N O ? * " s d i s p l a y e d .

Dial he CO number101hrough12).Whendial ing01) ,"CONO ? * 01 willbe displayed.

Press he l\EMORYutton.Sl\DRprnter illprintout.

6. Repeat teps4 to 5, to printhe otherCO parameter.

To prntExtension Parameters;

Dial\27).

Repeat ressinghe SELECTbuttonuntilthe "EXTPara" s displayed.

Press he l\y'EMOFYutton."JackNO ? -" willbe displayed.

Dial he acknumber 0'1hrough32).Whendial ing01) ,'Jack NO ? - 0l wrllbe drsplayed.

Press he MEMORYbutton.SMDRprinterwillprintout.

6. Repeat teps4 to 5, toprint

he otherack

number.To prntDSS ConsoleParameters:

1. Diat(27).

2. Repeatpressinghe SELECTbuttonuntilthe "DSSPara" s displayed.

Press he MEMORYbutton.'DSS NO ? -" willbe displayed.

Dial he DSSnumber1or 2) .Whendialing1 ,''DSSNO ? -- 1" willbe displayed.

Press he MEMORYbutton.SMDRprinterwillprintout.

Repeatsteps 4 to 5, to printthe other DSS Consoleparameter.

Aftercompletingrintng,o return othe nitialmooe;1. PressheENDbutton.

Programming TableSeepage 1

1 .

2.

3.

4.

2'l


22/52

AB:E: DayMode@: NightNode

I

EorE

: [: servicelass ...defaultall32 acks)

l l:service lass5

CD: Etrtr:

: to assignhesame n all32 acknumbers:on ack umber1

@ @ : on acx umber2

DescriptionToll estrctionan helpeliminateelephone buseandcontributeo savngelephoneosts.Thereare ive service f classesvailableor eachextension.

Programmng1. aDial (61)or day mode.

a Dial 62) or nightmode."JackNO?-" wllbe displayed.

2. Press he NEXT buttonor dial he acknumber(01 hrough 2)."#01;Class-1"wil lbe displayednd 1"wl l l ink.

3. Press he service lassnumber 1 through5) .


The LCDwill stop blinking.5 aTo advance o the next acknumber,

press he NEXTbutton.aTo return o thepreviousacknumber,

press he PREVbutton.aTo go to a desiredacknumber,

press he SELECTbuttonand hen dial he ac knumber.

Repeat steps 3 to 5, to programhe assgnment nthe other acknumbers.

To return o the initialrogrammingode,press heEND butlon.

ProgrammingableSee pages 47 and 48.

SMceCbss SeloetonsAllowd Debd

1 All calls2 any calls otherthan

denieddialnumber20 codes programmed(Class DeniedCode

otherthan exceptonalcoro,it any callsother ha n

denieddialnumber40 codes programmed( C l a s s 2 a n d 3 D e n i e dCodeother hanexceptonal ord)

4 any calls otherthandenieddalnumber

60 codes programmed(Class , 3 and 4 DeniedCodeother thanexceptionalcord)

any callsother handenieddial number

80 codes programmed(Class2, 3, 4 and 5DeniedCodeother ha nexceptonal ord)


23/52

Example:

I Applicatonf denieddial numberand exceptional ialnumber o servicelass2, 3, 4 and 5.

SrvieeCla3s

Der$d DialI'|tlmber

xcopliotlgialNr

22OOXXX 2201>< x

2301xx2401xx

3 200 X XN XX X X X2301XXX2401 xx

200 xxx333XXXX444x xxx

2461XXX

5200 xxx333 xxx444x XXX

I Entryof dialnumber o a codememoryocation)

fFRr;lBCltzl2_JDial 72 " Diat1" Press

ot 2" ME,4ORY

f 1":forProgrammableeature I1"2":orDND/FWD/Accountode

a "F3-Onefouch ButtonModeSelection"s chanqed sfollows.

Description

The F3 button can be changedromprogrammableleaturebutton o call forwarding/donot disturb/accountcode button.

dial 1"mode . . . .programmableeature unction

dial"2"mode ....call torwardng/doot disturb/accounl ode funclion

Operation

Settng

a Be sure he handset s in the cradleand heSP-PHONE uttons otf.

aSet the MEMORY switch of thepropretaryelephone(KX-T7050,KX-T1 3250, KX-T61 50, KX-T30850)o"PROGRAM".

Dal7) (2)."FeatureBunon"will be displayed.

Dial 1 forprogrammableeature unction r dial2)for call foMardng/donot dsturb/account odefunction.

3. Press heNEMORYutton.

aAfter programminghe F3 button, eturn he MEMORYswitch o the"SET"positon.

Class-2DeniedCodeCods Dialt\ao.

0 1 200 xxx02I

20

ExceptionalCodeCode DalNo.

0'10203o40506 2401X XX0708091 0l 1 2 3 0 1X X X

1 4

1 52201

manual panasonic kxt1232db

Documents