mago r gen.2 - philipsimages.philips.com/is/content/philipsconsumer/pdf...linear system indoor mago...
TRANSCRIPT
92
0/1
92
03
5
23(mm)
MAGO R Gen.2 - CEILING
LINEAR SYSTEM
INDOOR
MMAG0410G07NBO
MMAG0410G07WBO
MMAG0420G07NBO
MMAG0420G07WBO
This luminaire contains
built-in LED lamps.
The lamps cannot be
changed in the luminaire.
MMAG04_0G07_BO
32W/m IP40max
35˚C
Available with opal or transparent (as special) screen.
Finiture:- verniciatura bianca
Finishing:- white varnish
Disponibile con schermo opale o trasparente (speciale).
Caractéristiques Générales Allgemeine Informationen Informazioni generaliGeneral Information Caractéristiques Générales Allgemeine Informationen Informazioni generali
Material Matériaux Materialien Materiali
Number of light sources Nombre de Source(s) Anzahl Lichtquellen Numero sorgenti lum.
Fixing system Système de #xation Befestigungssystem Sistema di #ssaggio
Driver included Driver intégré Treiber inklusive Driver incluso
Protection class IEC Classe électrique Schutzklasse Classe di isolamento
IP code IP Schutzart Grado IP
IK code IK Schlagfestigkeit (IK) Grado IK
Optic type Optique Optik Ottica
Cable Câble Kabel Cavo
Dimmable Gradable Dimmbar Dimmerabile
European Community mark Marquage CE CE-Zeichen Marchio comunità europea
Lifetime to 80% luminous 'ux Durée vie 80% 'ux lumineux Lebensdauer bis 80% Lichtstrom Durata funzion. (80% 'usso)
Weight (kg) Poids (kg) Gewicht (kg) Peso (Kg)
Electrical Caractéristiques Electriques Elektrische Kenndaten Corrente
Input voltage Tension d' alimentation Netzspannung Tensione di alimentazione
Initial performances Performances initiales Performance iniziali
Initial input power Initial input power Systemleistung Potenza di sistema
Initial luminous 'ux Initial luminous 'ux Lichtstrom Flusso luminoso iniziale
Initial LED luminaire e*cacy Initial LED luminaire e*cacy E*zienz Initial LED luminaire e*cacy
Init. Corr. Color Temperature* Init. Corr. Color Temperature* Farbtemperatur* Temperatura colore lampada*
CRI IRC CRI CRI
Application conditions Condizioni applicazione
Ambient temperature range Température ambiante Umgebungstemperatur Temperatura ambiente
Anfängliche Leistung
EinsatzbedingungenConditions d'application
Aluminum
Strip LED
Screws
NO
III
IP40
/
opal
1 m
DALI-DMX-1...10V
CE
50 000 h
1,20 kg (920mm)
24V
32 W/m
1500 lm/m
45 lm/W
3000K - 4000K
80
max. +35 °C
* Colour temperature could change max. +/- 8%.
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_02 - 2015 (K)
LINEAR SYSTEM
INDOOR
Mago R gen2_ceiling ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
MMAG04_0G07_BO
-Togliere tensione prima di eseguire operazioni di manutenzione.
-Disconnect main voltage before maintenace operation.
GE
NE
RA
LI /
GE
NE
RA
LS
CA
BL
AG
GIO
/ W
IRIN
G
-E!ettuare il cablaggio usando un sistema che garantisca almeno il grado IP della lampada.
-Make the wiring using a system that guarantees at least the IP grade of the lamp.
Secondo la direttiva comunitaria WEEE (Waste Electrical and Electronic Equipment) l’apparecchio non può essere smaltito con i ri#uti indi!erenziati. Deve essere portato nelle strutture locali per lo smaltimento ed il riciclaggio dei prodotti elettronici.
SM
ALT
IME
NTO
/
DIS
PO
SA
L
In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
-L'installazione deve essere fatta da personale quali#cato.
-Installation should be carried out by a suitable quali#ed installer.
-Tutte le operazioni di cablaggio e manutenzione vanno eseguite con l’interruttore generale in posizione OFF.
-All wiring and maintenance must be performed with the main switch in the OFF position.
IP4032W/mmax
35˚C1,26
kg/m
- Collegare l'apparecchio all'alimentatore e poi connettere l'alimentatore al 220V.
- Connect the #tting to the feeder and then connect the feeder at 220V.
-In caso di guasti, previa autorizzazione al reso di ILTI Luce, il prodotto non dovra essere nè aperto nè smontato.
-In case of failure, upon a return authorization of ILTI LUCE, the product will be not neither open nor dismounted.
L=1mt (sez. 2x0,6 mm2 )
(mm)
junction box(not included)
Black
Red
110-240V*
50~60Hz
L
N
LED DriverINPU
T
OU
TPUT
24V
92
0/1
92
03
5
23
1
2
3
4
5
Alimentatori/ LED Drivers
WALIM60W24V
WALIMLED20/24
WALIMLED100/24
WALIMLED240/24
WALI/DIMM/JOLLY
Codice/Codenon inclusi/not included
Caratteristiche/Speci!cations
20W - 24V
60W - 24V
100W - 24V
240W - 24V
20W - 24V dimm.
* Veri!care la tensione di ingresso supportata dagli alimentatori / Verify the input tension supported from drivers
Esempio di collegamento (connessione in parallelo)Example of connection (parallel connection)
50/60 Hz110V-240V*
WBOKVAR variatore/dimmer 1/10V
WBOKOTDIM dimmer (120W max)*
* necessita di alimentatore/needs driver
+
-
MAGO R gen 2 - 1mt
L N
Dri
ver
24
V
up to 50cm
up to 1,5mt
up to 3mt
up to 7mt
up to 50cm
+
-
MAGO R gen 2 - 1mt
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your #les
MADE in ITALY_10 - 2015 (M)ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]
(mm)
MAGO R Gen.2 - RECESSED
LINEAR SYSTEM
INDOOR
MMAG0110G07NBO
MMAG0110G07WBO
MMAG0120G07NBO
MMAG0120G07WBO
MMAG0130G07NBO
MMAG0130G07WBO
This luminaire contains
built-in LED lamps.
The lamps cannot be
changed in the luminaire.
MMAG01_0G07_BO
32W/m IP40max
35˚C
Caractéristiques Générales Allgemeine Informationen Informazioni generaliGeneral Information Caractéristiques Générales Allgemeine Informationen Informazioni generali
Material Matériaux Materialien Materiali
Number of light sources Nombre de Source(s) Anzahl Lichtquellen Numero sorgenti lum.
Fixing system Système de #xation Befestigungssystem Sistema di #ssaggio
Driver included Driver intégré Treiber inklusive Driver incluso
Protection class IEC Classe électrique Schutzklasse Classe di isolamento
IP code IP Schutzart Grado IP
IK code IK Schlagfestigkeit (IK) Grado IK
Optic type Optique Optik Ottica
Cable Câble Kabel Cavo
Dimmable Gradable Dimmbar Dimmerabile
European Community mark Marquage CE CE-Zeichen Marchio comunità europea
Lifetime to 80% luminous 'ux Durée vie 80% 'ux lumineux Lebensdauer bis 80% Lichtstrom Durata funzion. (80% 'usso)
Weight (kg) Poids (kg) Gewicht (kg) Peso (Kg)
Electrical Caractéristiques Electriques Elektrische Kenndaten Corrente
Input voltage Tension d' alimentation Netzspannung Tensione di alimentazione
Initial performances Performances initiales Performance iniziali
Initial input power Initial input power Systemleistung Potenza di sistema
Initial luminous 'ux Initial luminous 'ux Lichtstrom Flusso luminoso iniziale
Initial LED luminaire e*cacy Initial LED luminaire e*cacy E*zienz Initial LED luminaire e*cacy
Init. Corr. Color Temperature* Init. Corr. Color Temperature* Farbtemperatur* Temperatura colore lampada*
CRI IRC CRI CRI
Application conditions Condizioni applicazione
Ambient temperature range Température ambiante Umgebungstemperatur Temperatura ambiente
Anfängliche Leistung
EinsatzbedingungenConditions d'application
Aluminum
Strip LED
Springs
NO
III
IP40
/
opal
1 m
DALI-DMX-1...10V
CE
50 000 h
1,20 kg (920mm)
24V
32 W/m
1500 lm/m
45 lm/W
3000K - 4000K
80
max. +35 °C
* Colour temperature could change max. +/- 8%.
Available with opal or transparent (as special) screen.
Finiture:- verniciatura bianca
Finishing:- white varnish
Disponibile con schermo opale o trasparente (speciale).9
20
/19
20
/29
20
43
42
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_02 - 2015 (K)
LINEAR SYSTEM
INDOOR
Mago R gen2_recessed ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
BWKL01_0G07_AA
-Togliere tensione prima di eseguire operazioni di manutenzione.
-Disconnect main voltage before maintenace operation.
GE
NE
RA
LI /
GE
NE
RA
LS
CA
BL
AG
GIO
/ W
IRIN
G
-E!ettuare il cablaggio usando un sistema che garantisca almeno il grado IP della lampada.
-Make the wiring using a system that guarantees at least the IP grade of the lamp.
Secondo la direttiva comunitaria WEEE (Waste Electrical and Electronic Equipment) l’apparecchio non può essere smaltito con i ri#uti indi!erenziati. Deve essere portato nelle strutture locali per lo smaltimento ed il riciclaggio dei prodotti elettronici.
SM
ALT
IME
NTO
/
DIS
PO
SA
L
In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
-L'installazione deve essere fatta da personale quali#cato.
-Installation should be carried out by a suitable quali#ed installer.
-Tutte le operazioni di cablaggio e manutenzione vanno eseguite con l’interruttore generale in posizione OFF.
-All wiring and maintenance must be performed with the main switch in the OFF position.
IP4032W/mmax
35˚C1,26
kg/m
- Collegare l'apparecchio all'alimentatore e poi connettere l'alimentatore al 220V.
- Connect the #tting to the feeder and then connect the feeder at 220V.
-In caso di guasti, previa autorizzazione al reso di ILTI Luce, il prodotto non dovra essere nè aperto nè smontato.
-In case of failure, upon a return authorization of ILTI LUCE, the product will be not neither open nor dismounted.
L=1mt (sez. 2x0,6 mm2 )
(mm)
junction box(not included)
Black
Red
110-240V*
50~60Hz
L
N
LED DriverINPU
T
OU
TPUT
24V
92
0/1
92
0/2
92
04
3
42
36/38
≥3<40
Alimentatori/ LED Drivers
WALIM60W24V
WALIMLED20/24
WALIMLED100/24
WALIMLED240/24
WALI/DIMM/JOLLY
Codice/Codenon inclusi/not included
Caratteristiche/Speci!cations
20W - 24V
60W - 24V
100W - 24V
240W - 24V
20W - 24V dimm.
WBOKVAR variatore/dimmer 1/10V
WBOKOTDIM dimmer (120W max)*
* necessita di alimentatore/needs driver
up to 50cm
up to 1,5mt
up to 3mt
up to 7mt
up to 50cm
* Veri!care la tensione di ingresso supportata dagli alimentatori / Verify the input tension supported from drivers
Esempio di collegamento (connessione in parallelo)Example of connection (parallel connection)
50/60 Hz110V-240V*
+
-
MAGO R gen 2 - 1mt
L N
Dri
ver
24
V
+
-
MAGO R gen 2 - 1mt
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your #les
MADE in ITALY_10 - 2015 (M)ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]
43920/1920/2920
23
ma
x. 2
00
0
(mm)
MAGO R Gen.2 - SUSPENSION
LINEAR SYSTEM
INDOOR
MMAG0310G07NBO
MMAG0310G07WBO
MMAG0320G07NBO
MMAG0320G07WBO
MMAG0330G07NBO
MMAG0330G07WBO
This luminaire contains
built-in LED lamps.
The lamps cannot be
changed in the luminaire.
MMAG031_0G07_BO
32W/m IP40max
35˚C
Available with opal or transparent (as special) screen.
Finiture:- verniciatura bianca
Finishing:- white varnish
Disponibile con schermo opale o trasparente (speciale).
Caractéristiques Générales Allgemeine Informationen Informazioni generaliGeneral Information Caractéristiques Générales Allgemeine Informationen Informazioni generali
Material Matériaux Materialien Materiali
Number of light sources Nombre de Source(s) Anzahl Lichtquellen Numero sorgenti lum.
Fixing system Système de #xation Befestigungssystem Sistema di #ssaggio
Driver included Driver intégré Treiber inklusive Driver incluso
Protection class IEC Classe électrique Schutzklasse Classe di isolamento
IP code IP Schutzart Grado IP
IK code IK Schlagfestigkeit (IK) Grado IK
Optic type Optique Optik Ottica
Cable Câble Kabel Cavo
Dimmable Gradable Dimmbar Dimmerabile
European Community mark Marquage CE CE-Zeichen Marchio comunità europea
Lifetime to 80% luminous 'ux Durée vie 80% 'ux lumineux Lebensdauer bis 80% Lichtstrom Durata funzion. (80% 'usso)
Weight (kg) Poids (kg) Gewicht (kg) Peso (Kg)
Electrical Caractéristiques Electriques Elektrische Kenndaten Corrente
Input voltage Tension d' alimentation Netzspannung Tensione di alimentazione
Initial performances Performances initiales Performance iniziali
Initial input power Initial input power Systemleistung Potenza di sistema
Initial luminous 'ux Initial luminous 'ux Lichtstrom Flusso luminoso iniziale
Initial LED luminaire e*cacy Initial LED luminaire e*cacy E*zienz Initial LED luminaire e*cacy
Init. Corr. Color Temperature* Init. Corr. Color Temperature* Farbtemperatur* Temperatura colore lampada*
CRI IRC CRI CRI
Application conditions Condizioni applicazione
Ambient temperature range Température ambiante Umgebungstemperatur Temperatura ambiente
Anfängliche Leistung
EinsatzbedingungenConditions d'application
Aluminum
Strip LED
Suspension Kit
NO
III
IP40
/
opal
/
DALI-DMX-1...10V
CE
50 000 h
1,20 kg (920mm)
24V
32 W/m
1500 lm/m
45 lm/W
3000K - 4000K
80
max. +35 °C
* Colour temperature could change max. +/- 8%.
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_02 - 2015 (K)
LINEAR SYSTEM
INDOOR
Mago R gen2_suspension ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
MMAG03_0G07_BO
-Togliere tensione prima di eseguire operazioni di manutenzione.
-Disconnect main voltage before maintenace operation.
GE
NE
RA
LI /
GE
NE
RA
LS
CA
BL
AG
GIO
/ W
IRIN
G
-E!ettuare il cablaggio usando un sistema che garantisca almeno il grado IP della lampada.
-Make the wiring using a system that guarantees at least the IP grade of the lamp.
Secondo la direttiva comunitaria WEEE (Waste Electrical and Electronic Equipment) l’apparecchio non può essere smaltito con i ri#uti indi!erenziati. Deve essere portato nelle strutture locali per lo smaltimento ed il riciclaggio dei prodotti elettronici.
SM
ALT
IME
NTO
/
DIS
PO
SA
L
In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
-L'installazione deve essere fatta da personale quali#cato.
-Installation should be carried out by a suitable quali#ed installer.
-Tutte le operazioni di cablaggio e manutenzione vanno eseguite con l’interruttore generale in posizione OFF.
-All wiring and maintenance must be performed with the main switch in the OFF position.
IP4032W/mmax
35˚C1,26
kg/m
- Collegare l'apparecchio all'alimentatore e poi connettere l'alimentatore al 220V.
- Connect the #tting to the feeder and then connect the feeder at 220V.
-In caso di guasti, previa autorizzazione al reso di ILTI Luce, il prodotto non dovra essere nè aperto nè smontato.
-In case of failure, upon a return authorization of ILTI LUCE, the product will be not neither open nor dismounted.
Alimentatori/ LED Drivers
WALIM60W24V
WALIMLED20/24
WALIMLED100/24
WALIMLED240/24
WALI/DIMM/JOLLY
Codice/Codenon inclusi/not included
Caratteristiche/Speci!cations
20W - 24V
60W - 24V
100W - 24V
240W - 24V
20W - 24V dimm.
WBOKVAR variatore/dimmer 1/10V
WBOKOTDIM dimmer (120W max)*
* necessita di alimentatore/needs driver
up to 50cm
up to 1,5mt
up to 3mt
up to 7mt
up to 50cm
* Veri!care la tensione di ingresso supportata dagli alimentatori / Verify the input tension supported from drivers
Esempio di collegamento (connessione in parallelo)Example of connection (parallel connection)
50/60 Hz110V-240V*
+
-
MAGO R gen 2 - 1mt
L
N
Driver xxW24V
43920/1920/2920
23
ma
x. 2
00
0
L=1mt (sez. 2x0,6 mm2 )
(mm)
junction box(not included)
Black
Red
110-240V*
50~60Hz
L
N
LED DriverINPU
T
OU
TPUT
24V
4
3
50
mm
Ø70mm
33mm
-Montare il set sospensione (3) tramite tasselli. Lasciare il #lo intrecciato in inox (4) pendente verso il basso
-Mount the suspension kit through the rawplug (3) let the wire (4) pending towards down.
Rosone /ceiling rose
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your #les
MADE in ITALY_10 - 2015 (M)ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]
LINEAR SYSTEM
INDOOR
Mago R gen2 POLAR DIAGRAM
tabella di riepilogo prodotti/ product overview table
MMAG0410G07NBO
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
codice/
code
colore/
colour
tipo/
type
potenza/
power
caratteristiche/
specifications
fascio ottico/
optic beam
ottica/
optictipo di LED/
LED type
materiale/
material
fissaggio/
fixation
IP/
IP
MMAG0110G07NBO neutral whiteinterni/
indoor32W L= 102cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
incasso/
recessed40
MMAG0110G07WBO warm whiteinterni/
indoor32W L= 102cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
incasso/
recessed40
MMAG0120G07NBO neutral whiteinterni/
indoor64W L= 192cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
incasso/
recessed40
MMAG0120G07WBO warm whiteinterni/
indoor64W L= 192cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
incasso/
recessed40
MMAG0130G07NBO neutral whiteinterni/
indoor96W L= 292cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
incasso/
recessed40
MMAG0130G07WBO warm whiteinterni/
indoor96W L= 292cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
incasso/
recessed40
MMAG0410G07NBO neutral whiteinterni/
indoor32W L= 102cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
esterno/
surface mounted40
MMAG0410G07WBO warm whiteinterni/
indoor32W L= 102cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
esterno/
surface mounted40
MMAG0420G07NBO neutral whiteinterni/
indoor64W L= 192cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
esterno/
surface mounted40
MMAG0420G07WBO warm whiteinterni/
indoor64W L= 192cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
esterno/
surface mounted40
MMAG0310G07NBO neutral whiteinterni/
indoor32W L= 102cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
sospensione/
suspension40
MMAG0310G07WBO warm whiteinterni/
indoor32W L= 102cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
sospensione/
suspension40
MMAG0320G07NBO neutral whiteinterni/
indoor64W L= 192cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
sospensione/
suspension40
MMAG0320G07WBO neutral whiteinterni/
indoor64W L= 192cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
sospensione/
suspension40
MMAG0330G07NBO neutral whiteinterni/
indoor96W L= 292cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
sospensione/
suspension40
MMAG0330G07WBO neutral whiteinterni/
indoor96W L= 292cm
schermo opale/
opal screen
fissa/
fixed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
sospensione/
suspension40
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]