m3 or #40 18 p laser level · 24" on center 5/8" type x gypsum drywall screws spaced...
TRANSCRIPT
Steelcase Flex Collection - Wall Rail
If you have a problem, question, or request, callyour local dealer, or Steelcase Line 1 at888.STEELCASE (888.783.3522)for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)Or visit our website: www.steelcase.com© 2019 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
®
Page 1 of 6Doc # 139369 Rev A
M3 or #40
18
P
Laser Level
®
24" on center
5/8" Type Xgypsum drywall
Screws spaced 12" apart
1810 mm(71¼")Portrait
910 mm (35 ")Landscape
25 ga. (0.018 - 0.020)cold formed 33 ksi steel studs
NOTE: A minimum of 5 #12x1" sheet metal or wood screws are required to attach rail to VIA skins.
Wall Construction and Rail Spacing Overview
Page 2 of 6Doc # 139369 Rev A
®
18 Drill Bit
Drill hole in wall rail at every stud location.
If end of rail is not at a stud location, drill ½" hole in drywall 50 mm from end of rail and insert toggler.
50 mm(2")
1
2
3
Laser Level
2110 mm(83 1/16")
Page 3 of 6Doc # 139369 Rev A
®
OR
1810 mm(71¼")Portrait
910 mm (35 ")Landscape
50 mm(2")
NOTE: Do NOT tighten the screws fully. Keep the rail loose enough to move around.
Repeat Steps 1-5 for the lower rail.Measure 1810 or 910 mm (71¼" - 35 ") from underside of top rail dependingon orientation.
P Drill Bit
4
5
6
Page 4 of 6Doc # 139369 Rev A
®
#40 Drill Bit
Rail Connection and End Cap Installation
9
7
8
10
11
Page 5 of 6Doc # 139369 Rev A
®
Rail Attachment
12
13
14
SNAP
Page 6 of 6Doc # 139369 Rev A