lte ret naming implementation - telecom closeoutstelecomcloseouts.com/ret naming implementation -...
TRANSCRIPT
AT&T CONFIDENTIAL & PROPRIETARY Page 1 of 94 Use pursuant to Company instructions © 2014 AT&T
LTE RET Naming Implementation
ATT-JA-WIRELESS-000-102-194 Issue 3.0 03/10/2015
Overview
This document provides instructions, implementation and examples for the LTE RET standard naming convention.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 2 of 94 Use pursuant to Company instructions © 2014 AT&T
Table of Contents
1. About This Document ....................................................................................................................... 5
1.1 General Objective ....................................................................................................................... 5
1.2 Audience ..................................................................................................................................... 5
1.3 Related Documentation ............................................................................................................... 5
1.4 Acronyms and Terms .................................................................................................................. 5
1.5 Trademarks ................................................................................................................................. 5
1.6 Contacts ...................................................................................................................................... 6
2. Tower crew RET/TMA Installation Check list .................................................................................... 7
3. ATT Naming Convention for “RET NAME” ........................................................................................ 8
3.1 Convention: USID ....................................................................................................................... 9
3.2 Convention: CellId1/CellId2/CellId3 .......................................................................................... 10
3.3 Convention: AntPos .................................................................................................................. 11
3.4 Convention: Freq ....................................................................................................................... 12
3.5 Convention: Tech ...................................................................................................................... 13
4. Write “RET NAME” in the following locations: ................................................................................ 14
4.1 Powerwave MCU Screenshot ................................................................................................... 15
4.2 Andrew Teletilt Controller Screenshot ...................................................................................... 16
4.3 Kathrein Screenshot .................................................................................................................. 17
5. Differences between Job Aid and ATT-002-125 v8 documentation ............................................... 18
6. AISG Fields ..................................................................................................................................... 19
7. Configuration Examples .................................................................................................................. 20
7.1 Common Daisy-Chaining Configurations ................................................................................... 21
7.2 Scenarios ................................................................................................................................... 22
7.3 Future LTE Cell Site .................................................................................................................. 23
7.4 Example A ................................................................................................................................. 24
7.5 Example B ................................................................................................................................. 25
7.6 Example C ................................................................................................................................. 26
7.7 Typical Configurations: Multi-Band / BiSector Antenna ............................................................ 27
7.8 RET Connections via LTE-RRU (per Sector)............................................................................ 28
8. ALCATEL- LUCENT - Checking RET SubUnit properties via 5620 GUI ........................................... 29
8.1 Step 1 ........................................................................................................................................ 30
8.2 Step 2 ........................................................................................................................................ 31
8.3 Step 3 ........................................................................................................................................ 32
8.4 Step 4 ........................................................................................................................................ 33
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 3 of 94 Use pursuant to Company instructions © 2014 AT&T
8.5 Step 5 ........................................................................................................................................ 34
8.6 Step 6 ........................................................................................................................................ 35
8.7 Step 7 ........................................................................................................................................ 36
8.8 Repeat Steps for remaining RETs .............................................................................................. 38
9. RET Name Deployment in Alcatel-Lucent OSS ............................................................................... 39
10. RET Name Deployment in Ericsson OSS ........................................................................................ 84
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 4 of 94 Use pursuant to Company instructions © 2014 AT&T
Document Revision History
This table identifies content revisions made to this document.
Date Rev Revision Description Writer Sponsor
06/03/2014 1.0 Initial Document Release Anthony DiRaimo TBD
10/29/2014 2.0 Added the OSS Naming Appendix Anthony DiRaimo TBD
03/10/2015 3.0 Frequency Band Update Pg. 8 & 12 Anthony DiRaimo TBD
RACI
This table identifies RACI team members.
Accountable Responsible Consulted Informed
Scott Whitney Anthony DiRaimo
David Giesfeldt
Tanvi Alam TBD
Copyright © 2014 AT&T Intellectual Property. All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of the publisher.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 5 of 94 Use pursuant to Company instructions © 2014 AT&T
1. About This Document
1.1 General Objective
This document provides instructions, implementation and examples for the LTE RET standard naming convention.
1.2 Audience
This document is intended for AT&T Mobility RF engineering, implementation and construction engineering and operation engineering personnel and authorized personnel by AT&T Mobility including civil vendor and contractors.
1.3 Related Documentation
[1] ATT-002-290-125 RET Guidelines [2] ATT-002-290-581 Antenna Implementation [3] …
1.4 Acronyms and Terms
The following acronyms and terms are used in this document:
RET Remote Electrical Tilt
CCU Central Control Unit
MCU Master Control Unit
1.5 Trademarks
The trademarks used in this document are the property of their respective owners.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 6 of 94 Use pursuant to Company instructions © 2014 AT&T
1.6 Contacts
For questions or comments about this document's technical content or to request changes to the document, contact:
Anthony DiRaimo
904-407-2628
David Giesfeldt
414-339-0309
Tanvi Alam
404-499-6857
Scott Whitney
404-375-0126
Cecilia Nguyen
972-277-5815
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 7 of 94 Use pursuant to Company instructions © 2014 AT&T
2. Tower crew RET/TMA Installation Check list
High Level Task (Not meant to be a complete list of instructions please refer to applicable MOPs/Handbooks)
Antenna installation: RF cabling (PIM Test / Sweep tests) AISG cabling Take pictures that clearly show labeling of devices. Save these in the site close out material.
Provision Antenna Line Devices (RET and/or TMA) Confirm all connected devices are AISG 2.0 Calibrate RET actuators Confirm no alarms Set Tilts on Actuator per RF design Set “RET NAME” in the SECTOR ID or BASESTATION ID fields for each detected RET following
customers convention. Confirm no alarms Confirm TMA is set to Normal mode (not Bypass mode) Export RET/TMA configuration from CCU and/or capture screen shots to store in Site Close
out material.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 8 of 94 Use pursuant to Company instructions © 2014 AT&T
3. ATT Naming Convention for “RET NAME”
Usage: [USID][CellId1][CellId2][CellId3][AntPos][FrequencyBand][Tech]
ATT-002-290-125 (Issue 8, 02/03/14) Antenna Remote Electrical Tilt (RET) Guidelines
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 9 of 94 Use pursuant to Company instructions © 2014 AT&T
3.1 Convention: USID
Usage: [USID][CellId1][CellId2][CellId3][AntPos][FrequencyBand][Tech]
Definition: • The Universal Site ID (USID) is intended to describe the location where all the various equipment resides. • Notice there are typically several names associated to equipment in a given site. • It is not tied to a particular technology.
Rules: • USID must be 6 characters long. • If the USID is not 6 characters long, then 0’s must be added at the beginning.
• Example: USID=77412 this is only 5 chars. Need to pad with one 0 at the front so that it becomes “077412” USID=823 this is only 3 chars. Need to pad with three 0’s at the front so that it becomes “000823” USID=109845 this is exactly 6 chars. DO NOT add any 0’s at the front. It should remain “109845”
See additional examples below
EXAMPLE Input: EXAMPLE OUTPUT:
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 10 of 94 Use pursuant to Company instructions © 2014 AT&T
3.2 Convention: CellId1/CellId2/CellId3
Usage: [USID][CellId1][CellId2][CellId3][AntPos][FrequencyBand][Tech]
ALPHA
RRH
ALPHA ANT
ALPHA
RRH
BiSector
ALPHA
DELTA ANT
DELTA
RRH
Diplexer
Typical. Notice no other transmitter sector is connected to this Antenna Segment. CellId2 and CellId3 have “-” to indicate only 1 transmitting sector.
Typically found on bi-sector sites where 1 antenna panel radiates 2 sectors. This example identifies Alpha and Delta transmitting out this antenna segment.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 11 of 94 Use pursuant to Company instructions © 2014 AT&T
3.3 Convention: AntPos
Usage: [USID][CellId1][CellId2][CellId3][AntPos][FrequencyBand][Tech]
Definition: • AntPos is the Relative Antenna Position
• From inside the triangle looking out, the relative position counts from the left. • Relative position values range from 1 to 5.
1 2 3 4 5
ALPHA
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 12 of 94 Use pursuant to Company instructions © 2014 AT&T
3.4 Convention: Freq
Usage: [USID][CellId1][CellId2][CellId3][AntPos][FrequencyBand][Tech]
Definition: • Frequency Band represents the RF frequency of the transmitter connected to this antenna segment. • When multiple frequencies are combined (example UMTS 850 and LTE 700) to an antenna segment, use
the frequency of the newest technology (example LTE 700 was installed after the UMTS 850).
Allowed Value Description
2 2100 MHz
7 700 MHz
8 850 MHz
9 1900 MHz
D 1900 MHz & 2100 MHz combined
F 1900 MHz & 2300 MHz combined
H 2100 MHz & 2300 MHz combined
J 1900 MHz & 2100 MHz & 2300 MHz combined
K 700 MHz & 850 MHz combined
Q 700 MHz D & E Band Only
W 2300 MHz
Y 700 MHz D & E & 850 MHz combined
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 13 of 94 Use pursuant to Company instructions © 2014 AT&T
3.5 Convention: Tech
Usage: [USID][CellId1][CellId2][CellId3][AntPos][FrequencyBand][Tech]
Definition: • Tech field describes the technology of the transmitting
equipment connected to the antenna segment. • It is necessary for RF teams to know which Technology
(technologies) is connected to this antenna segment to
ensure the correct tilt is modified.
Commonly used values: G for GSM RETs
U for UMTS RETs
L for LTE RETs
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 14 of 94 Use pursuant to Company instructions © 2014 AT&T
4. Write “RET NAME” in the following locations:
Kathrein CCU:
• Use the Sector ID for both singleActuator and multiActuator RETs
Powerwave MCU:
• Use the Sector field for both singleActuator and multiActuator RETs
Andrew TeleTilt
• Use the Base Station ID field for both singleActuator and MultiActuator RETs
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 15 of 94 Use pursuant to Company instructions © 2014 AT&T
4.1 Powerwave MCU Screenshot
1. Go to the ALD Installation page
2. Enter “RET NAME” in the Sector field.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 16 of 94 Use pursuant to Company instructions © 2014 AT&T
4.2 Andrew Teletilt Controller Screenshot
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 17 of 94 Use pursuant to Company instructions © 2014 AT&T
4.3 Kathrein Screenshot
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 18 of 94 Use pursuant to Company instructions © 2014 AT&T
5. Differences between Job Aid and ATT-002-125 v8 documentation
• SECTOR NAMING DIFFERENCE: ATT-002-290-125 v8 has this statement on pg 41:
There are three CellID fields to account for the possibility of multiple carriers being combined and fed to an antenna port. CellIDs (transmitter IDs) can have either a letter or a number as is consistent with the local market’s practice. In the case where there are no transmitters connected to the antenna port being controlled - the character should be a dash “-“.
ALU enforces the “Network Element Naming Standard” document published by ATT ND-00067 Rev. 4.0 006/30/2012. (if there is a later revision that conflicts please advise)
• Powerwave MCU RET NAME Location ATT-002-290-125 v8 has this statement on pg 43:
Insert the RET name in the “Description” field in the “Device: ALD Installation” screen. The name can only be seen in the same screen and not in the MCU main screen.
ALU requires the “RET NAME” to be added into the AISG standard SECTOR field so that it can be viewed. We cannot see the non AISG Description field.
• Kathrein CCU RET NAME Location ATT-002-290-125 v8 has this statement on pg 42:
Insert RET name in the “Device Name” field in the “Device Setup” screen of the CCU.
ALU requires the “RET NAME” to be added into the AISG standard SECTOR field so that it can be viewed. We cannot see the non AISG Device Name field.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 19 of 94 Use pursuant to Company instructions © 2014 AT&T
6. AISG Fields
• Each RET Actuator and TMA subunit contain user definable attributes that are stored on the actuator itself.
Sector ID
Base Station ID
Installers ID
Installation Date
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 20 of 94 Use pursuant to Company instructions © 2014 AT&T
7. Configuration Examples
AT&T’s “RET NAME” Convention
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 21 of 94 Use pursuant to Company instructions © 2014 AT&T
7.1 Common Daisy-Chaining Configurations
LO HI
AISG
700 RRH
1900 RRH
LO HI
AISG
700 RRH
1900 RRH
LO HI
AISG
700 RRH
1900 RRH
L H L H L H
700 RRH
L H L H L H
700 RRH
L H L H
700 RRH
Typical RET Configuration Each Sectors RFM controls its own antenna. LO band is daisy-chained to HI band
Multiple Technologies Daisy-Chained LTE RFM controls all the different technology rets for this one sector
LTE UMTS GSM ALPHA BETA GAMMA ALPHA MAIN
ALPHA Diversity
Multiple Sector Daisy-Chained Single LTE RFM controls all the different
Sectors LTE Rets
Separate Diversity Antenna Daisy-Chained Single LTE RFM controls its own sectors RETs Main and diversity are physically different
antennas instead of one. Both LO and Both HI should be tilted the same.
L H
700 RRH
LTE
ALPHA BETA GAMMA
SectorID: 001234A--17L SectorID: 001234A--19L
SectorID: 001234A--17L SectorID: 001234A--19L SectorID: 001234A--28U SectorID: 001234A--29U SectorID: 001234A--38G SectorID: 001234A--39G
SectorID: 001234A--17L SectorID: 001234A--19L SectorID: 001234B--17L SectorID: 001234B--19L SectorID: 001234C--17L SectorID: 001234C--19L
SectorID: 001234A--17L SectorID: 001234A--19L SectorID: 001234A--27L SectorID: 001234A--29L
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 22 of 94 Use pursuant to Company instructions © 2014 AT&T
7.2 Scenarios
LTE RFM connected to its own antenna
LTE 700 RFM diplexed with UMTS 850 to LO port of antenna
LTE LTE
LTE
UMTS GSM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 23 of 94 Use pursuant to Company instructions © 2014 AT&T
7.3 Future LTE Cell Site
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 24 of 94 Use pursuant to Company instructions © 2014 AT&T
7.4 Example A
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 25 of 94 Use pursuant to Company instructions © 2014 AT&T
7.5 Example B
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 26 of 94 Use pursuant to Company instructions © 2014 AT&T
7.6 Example C
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 27 of 94 Use pursuant to Company instructions © 2014 AT&T
7.7 Typical Configurations: Multi-Band / BiSector Antenna
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 28 of 94 Use pursuant to Company instructions © 2014 AT&T
7.8 RET Connections via LTE-RRU (per Sector)
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 29 of 94 Use pursuant to Company instructions © 2014 AT&T
8. ALCATEL- LUCENT - Checking RET SubUnit properties via 5620 GUI
ALCATEL - LUCENT
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 30 of 94 Use pursuant to Company instructions © 2014 AT&T
8.1 Step 1 From “Equipment-Network” view in 5620 GUI, right click eNB and select “Properties”:
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 31 of 94 Use pursuant to Company instructions © 2014 AT&T
8.2 Step 2 In resulting window, left click “Equipment” icon (upper left, third one down, shaded blue in screenshot) to arrive at the screen below:
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 32 of 94 Use pursuant to Company instructions © 2014 AT&T
8.3 Step 3 Left click “+” sign beside Rack-2 (parent object for alpha 700 RRH and 1C+2C alpha RETs) to see child objects.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 33 of 94 Use pursuant to Company instructions © 2014 AT&T
8.4 Step 4 Left click “+” sign beside “RRH -1100 -2/1” to see child objects.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 34 of 94 Use pursuant to Company instructions © 2014 AT&T
8.5 Step 5 Left click “+” sign beside “RET – 1111 – 2/PW000008A1039011491” to see its child object.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 35 of 94 Use pursuant to Company instructions © 2014 AT&T
8.6 Step 6 Right click “RETSub-1”child object and select “Properties”.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 36 of 94 Use pursuant to Company instructions © 2014 AT&T
8.7 Step 7 Verify correct 12 character RET name has been assigned to the actuator. Note: The resulting window will include the “labelAssociatedENB” and “labelSectorId” attributes. If it is a Powerwave RET, a 12 character RET name entered into the actuator during field commissioning should be displayed in the box to the right of the “labelSectorID” attribute, as per
below. If it is an Andrews RET, a 12 character RET name entered into the actuator during field commissioning should be displayed in the box
to the right of the “labelAssociatedENB” attribute.
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 37 of 94 Use pursuant to Company instructions © 2014 AT&T
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 38 of 94 Use pursuant to Company instructions © 2014 AT&T
8.8 Repeat Steps for remaining RETs
1. Repeat 6 & 7 for all remaining “RET-Sub#” child objects under “RRH -1100 -2/1”
2. Repeat 3 – 8 for Rack 3 (parent object for beta 700 RRH and 1C+2C RETs)
3. Repeat 3 – 8 for Rack 4 (parent object for gamma 700 RRH and 1C+2C RETs)
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 39 of 94 Use pursuant to Company instructions © 2014 AT&T
9. RET Name Deployment in Alcatel-Lucent OSS
RET Name Deployment in Alcatel-Lucent OSS NOTE: At the present time SON DIM-L will recognize LTE Tech value of ‘L’ ONLY in the RET Name’s 12th character. (Please use Tech value ‘L’ for all LTE combination options listed in the Description box for K, V, Y, P, Q & T)
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 40 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 41 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 42 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 43 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 44 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 45 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 46 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 47 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 48 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 49 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields – WPS 4.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 50 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 51 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 52 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 53 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 54 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 55 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
Make RET Name change; copy and paste back onto WPS Tabular Editor
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 56 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 57 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 58 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 59 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 60 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 61 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 62 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields - SAM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 63 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields - SAM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 64 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 65 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 66 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 67 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields - SAM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 68 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields - SAM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 69 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields - SAM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 70 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields - SAM
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 71 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) - WPS 3.0 (optional)
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 72 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 73 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 74 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 75 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 76 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 77 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 78 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 79 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 80 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 81 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 82 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 83 of 94 Use pursuant to Company instructions © 2014 AT&T
ALU/// - RetSubUnit retFriendlyName & AntennaBandClass fields (continue…) – WPS 3.0
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 84 of 94 Use pursuant to Company instructions © 2014 AT&T
10. RET Name Deployment in Ericsson OSS
RET Name Deployment in Ericsson OSS NOTE: At the present time SON DIM-L will recognize LTE Tech value of ‘L’ ONLY in the RET Name’s 12th character. (Please use Tech value ‘L’ for all LTE combination options listed in the Description box for K, V, Y, P, Q & T)
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 85 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 86 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 87 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RETOOL Tool for RET Device Configuration
(Ericsson OSS)
By LL4682, July - 2014
• Retool is used for bulk upload
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 88 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
• Retool is used for bulk upload
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 89 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 90 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 91 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 92 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
RET Implementation
AT&T CONFIDENTIAL & PROPRIETARY Page 93 of 94 Use pursuant to Company instructions © 2014 AT&T
ER/// - RetSubUnit userLabel field
Syntax: