low cost dehumidifying dry storage cabinet model idsc-80 · 2018-10-04 · cabinet humidity inner...
TRANSCRIPT
CabinetHumidity
Inner Shutter
Desiccant with heater
Outer Shutter
Spring mechanismto control shutters Exhaust
Electroniccircuitary
reliable & caring since 1976For Optical Lenses, Photographic Cameras & other such commercial applications
Specifications:
Tempered ToughenedGlass Windows
Capacity: 84 litres • Tampered Toughened Glass Windows • Digital Display for internal Humidity• Humidity Controller maintains stable RH Level•Accuracy: ±3%RH (It is not ±3%)*•
Features:
* If the set point of humdity is 10%RH. Then the actual value will be within 7%RH & 13%RH. If set point is 18%RH then actual value will be within 15%RH & 21%RH.
Digital Thermo Hygrometer
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
www.indeonline.in Landline: 0172 - 4640415 Email: [email protected] Cell Phone: 09316134502
Warranty is 12 months from the date of invoice. It excludes any mechanical damage.
Humidity Range Humidity Technique Internal Dimensions External DimensionsMaterial No. of Shelves Input Supply
: 20%~60%RH: Semi-permanet dry Desiccant: 398W x 375D x 545H mm approx.: 400W x 400D x 620H mm approx.: Cold Rolled Steel with Black Paint: 2 (Adjustable types): 220V ~ 240V, 50Hz
Humidity is removed inside the Storage Cabinets by use of dry powerful zeolite desiccant. The desiccant is automatically recycled with an in-built heating mechanism and does not require replacement. of the desiccant. Moisture absorbed by the zeolite desiccant, is vaporized and is released outside of the cabinet.
Dehumidifying Principle
Low Cost Dehumidifying Dry Storage Cabinet Model IDSC-80
Strong Door Hinges
Humidity 20%~60%RH
Recommended RH value for storage of various articles
RH (%)
20%~30% RH
30%~40% RH
40%~50% RH
IC Chips, SMD Chips, Wafers, Precise Instruments, PCBs, BGAs
Semiconductors, Capacitors, Resistors, Nickel Cadmium Batteries, Precision Measuring Instruments, Medicines, Seeds, Stamps
Cameras, Lenses, Microscope, Endoscopy, Video Cameras, Film Rolls, Photographic films, Floppy Disks, DVDs, Leathers.
Articles
Powerful Desiccatorto maintain stable
set Humidity Range
Adjustable Shelves
Camera Lens storage
reliable & caring since 1976
Specifications:
Capacity: 240 litres • Tampered Toughened Glass Windows • LED Display for Temperature and Humidity• Humidity Controller maintains stable RH Level•Accuracy: ±3%RH (It is not ±3%)*•
Features:
* If the set point of humdity is 10%RH. Then the actual value will be within 7%RH & 13%RH. If set point is 18%RH then actual value will be within 15%RH & 21%RH.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
www.indeonline.in Landline: 0172 - 4640415 Email: [email protected] Cell Phone: 09316134502
Warranty is 12 months from the date of invoice. It excludes any mechanical damage.
Humidity Range Humidity Technique Internal Dimensions External DimensionsMaterial No. of Shelves Input Supply
: 20%~60%RH: Semi-permanet dry Desiccant: 598W x 372D x 1083H mm approx.: 600W x 400D x 1265H mm approx.: Cold Rolled Steel with Black Paint: 2 (Adjustable types): 220V ~ 240V, 50Hz
ESD Safe
Tempered ToughenedGlass Windows
Digital Thermo Hygrometer
Castor WheelsDesiccator to maintain
stable set Humidity range
ESD Safe Dry Storage Cabinet for PCBs & ICs Model IDSC-240
Normally available with immediate delivery as we stock this model
Humidity 20% ~ 60%RH
Heavy duty zinc alloy lock with air tightness
Strong & reliable Door Hinges
CabinetHumidity
Inner Shutter
Desiccant with heater
Outer Shutter
Spring mechanismto control shutters Exhaust
Electroniccircuitary
Miniaturization in electronics field, is resulting for use of expensive large size ICs which are not only static charge sensitive but are also moisture sensitive. Such devices needs higher level of moisture control as otherwise they will have internal damage during the reflow process because of moisture expansion. Major failure reason is the rapid heating of the moisture absorbed within the plastic encapsulant of such ICs. The prevention lies in storing such ICs in ESD Safe and Humidity controlled Dry Storage Cabinets.
ESD Safe Dehumidifying Cabinets must for storage of bare & assembled PCBs, ICs & other components
Humidity is removed inside the Storage Cabinets by use of dry
powerful zeolite desiccant. The desiccant is automatically recycled
with an in-built heating mechanism and does not require replacement.
Moisture absorbed by the zeolite desiccant, is vaporized and is
released outside of the cabinet.
Dehumidifying Principle
Die Pat
Normal Storagemoisture
During normal storage, ambientmoisture is absorbed into IC packages
Reflow Heating
Internal Peeling
Internal peeling is caused by watervapour pressure during heating
Reflow Heating
Package Cracking
Package micro-cracking is caused bythe vapour pressure from delamination
Micro Crack
Recommended RH value for storage of Electronic Assemblies and Components
RH (%)
20%~30% RH
30%~40% RH
IC Chips, SMD Chips, bare PCBs, BGAs and similar various other expensive electronics parts
Semiconductor components, Capacitor/Inductor/Resistor Chip components, Loaded PCBs.
Articles
CabinetHumidity
Inner Shutter
Desiccant with heater
Outer Shutter
Spring mechanismto control shutters Exhaust
Electroniccircuitary
reliable & caring since 1976
Normally available with immediate delivery as we stock this model
Heavy duty zinc alloy lock with air tightness
Specifications:
ESD Safe
Tempered ToughenedGlass Windows
Capacity: 320 litres • Tampered Toughened Glass Windows • LED Display for Temperature and Humidity• Humidity Controller maintains stable RH Level•Accuracy: ±3%RH (It is not ±3%)*•
Features:
* If the set point of humdity is 10%RH. Then the actual value will be within 7%RH & 13%RH. If set point is 18%RH then actual value will be within 15%RH & 21%RH.
Digital Thermo Hygrometer
Castor WheelsPowerful Desiccatorto maintain stableset Humidity range
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
www.indeonline.in Landline: 0172 - 4640415 Email: [email protected] Cell Phone: 09316134502
Warranty is 12 months from the date of invoice. It excludes any mechanical damage.
Miniaturization in electronics field, is resulting for use of expensive large size ICs which are not only static charge sensitive but are also moisture sensitive. Such devices needs higher level of moisture control as otherwise they will have internal damage during the reflow process because of moisture expansion. Major failure reason is the rapid heating of the moisture absorbed within the plastic encapsulant of such ICs. The prevention lies in storing such ICs in ESD Safe and Humidity controlled Dry Storage Cabinets.
ESD Safe Dehumidifying Cabinets must for storage of bare & assembled PCBs, ICs & other components
Humidity Range Humidity Technique Internal Dimensions External DimensionsMaterial No. of Shelves Input Supply
: 20% ~ 60%RH: Semi-permanet dry Desiccant: 898W x 420D x 848H mm approx.: 900W x 450D x 1030H mm approx.: Cold Rolled Steel with Black Paint: 3 (Adjustable types): 220V ~ 240V, 50Hz
ESD Safe Dry Storage Cabinet for PCBs & ICs Model IDSC-320
Strong & reliable Door Hinges
Humidity is removed inside the Storage Cabinets by use of dry
powerful zeolite desiccant. The desiccant is automatically recycled
with an in-built heating mechanism and does not require replacement.
Moisture absorbed by the zeolite desiccant, is vaporized and is
released outside of the cabinet.
Dehumidifying Principle
Die Pat
Normal Storagemoisture
During normal storage, ambientmoisture is absorbed into IC packages
Reflow Heating
Internal Peeling
Internal peeling is caused by watervapour pressure during heating
Reflow Heating
Package Cracking
Package micro-cracking is caused bythe vapour pressure from delamination
Micro Crack
Recommended RH value for storage of Electronic Assemblies and Components
RH (%)
20%~30% RH
30%~40% RH
IC Chips, SMD Chips, bare PCBs, BGAs and similar various other expensive electronics parts
Semiconductor components, Capacitor/Inductor/Resistor Chip components, loaded PCBs.
Articles
Humidity 20% ~ 60%RH with Digital Display