log building news - issue no. 76
TRANSCRIPT
-
8/10/2019 Log Building News - Issue No. 76
1/32
The EP&M is
or saleat the
Winter 2013 Number 76
eement Number 40707514
nside This Issue
ilding & Testing Compoundooden Beamspage 14,67
ch Talk: Cross-Tiedagon Axlespage 8
Years of Log Buildingstory
page 1122
ch Talk: Norwaypage 2324
g Building in Switzerlandpage 2526
assifiedspages 2830
vertisers in This Issue
page 31
Figure A
ww.logassociation.org
ILBA website
Building & Testing CompoundWooden Beams By Meinrad Rohner & Robert ChambersMEINRAD MEIRI ROHNER HAD SEEN FANCY OLD
WOODEN BEAMS IN CENTRAL EUROPEON TRAIN
TRESTLES AND BRIDGESWHERE TWO TIMBERS
WERE JOINED TO EACH OTHER TO MAKE ONE
DEEPER, STRONGER, MEMBER: A COMPOUND
WOODEN BEAM.
This September, Meiri and I taught two hands-
on classes in Kuopio, Finland at the Savo Technical
University. Most of the participants were log home
builders in Finland, and some came from Estonia and
Russia.
While Robert was teaching mitered truss
construction to half of the students, Meiri and his
students were building four different compound
wooden beams: three were built with wooden
interlocking joinery, and one used only structural
screws. Halfway through the courses, the students
switched, so they could help both with the
beams, and with the truss.
The beams and mitered truss were all
constructed to be parts of a building for a
customer. All four beams had 7.2m (23 7-1/2)
span, and all were built using Scots pine (Pinus
sylvestris) with 26% to 29% moisture content.
The round logs had about 290mm (11-1/2)
small-end diameter, and the timbers were sawn
from logs of about this same size. The trees
were more than 200 years old when they were
cut downnot surprising, since they had been
growing not that far from the Arctic Circle. It was
very high quality wood.
The four styles of compound wooden beams
that Meiri built during the courses can be seen in
Figure A and Photo 19 (page7).
og Building News
Download thisurrent issue at the
ILBA website
w.logassociation.org
40th
YEARINTERNATI
ONALLOG
BU
ILDERS
ASSOCIATI
ON
http://http//www.logassociation.orghttp://http//www.logassociation.orghttp://www.logassociation.org/http://http//www.logassociation.orghttp://http//www.logassociation.orghttp://www.logassociation.org/http://http//www.logassociation.orghttp://www.logassociation.org/http://www.logassociation.org/ -
8/10/2019 Log Building News - Issue No. 76
2/32
Winter 20132
LogBuildingNewsWinter 2013
Issue #76
Published four times a year
2012 International Log Builders Association
P.O. Box 775
Lumby, British Columbia
Canada V0E 2G0
Toll-free: 800-532-2900
Phone: 250-547-8776
Fax: 250-547-8775
www.logassociation.org
Ann Miks, [email protected]
Log Building News Editor
Robert [email protected]
Contributors to this issue:
Meiri Rohner
Roger Porrenga
Robert Chambers
Association History:
Ingrid Boys
Brian Lloyd
Ed Campbell
Vic Janzen
Gary Pendergrass
Robrt Savignac
David Rogers
Ann Miks
Terry Hall
Ed Shure
Mira Steinbrecher
Tom Hahney
Brian Olynek
Shannon Maris
Robert Chambers
Catharine Hansen
Gunnar Granberg
MISSION STATEMENT
This association is a non-profitorganization comprised of log crafters andaffiliated members from many countries.We are dedicated to the education of
both our members and the public.Our association has a mandate to
research, develop and share techniquesrelevant to the construction of superior
handcrafted log buildings.
Meiri writes:
The sawn-timber lightning bolt is a traditional method, which was used by the central-
European carpenters in early days. The wedged round log beam and the round log
lightning bolt are variations of old techniques, which I figured out because I wanted to use
great old ideas in round logs.
The development of these beams is not yet finished. There are things to improve, and
tools / jigs could be fabricated to help. But it is very rare that we are asked to do this
kind of work, and when we make these compound beams for customers (and with their
deadlines) we have little time to build better jigs!
Here are descriptions of how each of the four compound beams was fabricated:
1 Sawn Timbers Connected with Engineered Screws
Sawn timbers, screwed together with a double row of Sihga GoFix XB 8mm x 400mm
screws positioned as seen in the Figure A. Each timber was 170mm wide x 230mm
deep (6-1/2 x 9). The screws were installed using the manufacturers jig to locate
and shoot them in at the correct angle (Photo B).
2 Round Logs with Lightningbolt Cogs
The cogs were 70mm (2-3/4) tall. At completion, seven 16mm (5/8) diameter
throughbolts and small washers at top and bottom were installed (all bolt locations are
shown in Figure A).Heres the process: set the top log of the beam over the bottom log, and scribe the
long groove using a scriber that puts a scribe line on both logs. Remove the top log.
Mark the top of the log below for the lengths and positions where you want to have
each of the lightningbolt cogs start and end.
Use a block of wood to simulate the cog you will cut into the bottom log. The block
should be nearly as wide as the diameter of the log below, and must be longer than
the length of the longest cog. Set the block onto the lower log and hold it in place at
a slope using wedges.
The sawn timber beams were joined together withlong screws. One man holds the guide that positionsthe screw and gives it the correct angle.
Photo B
-
8/10/2019 Log Building News - Issue No. 76
3/32
LogBuildingNewsNumber 76
3
Now, set a scriber to the distance equal to the height from the
top edge of the block down to the long groove line on the log
below (photo 1). Lock the scriber at that setting. Now, hold the
scriber where you want
this cog to end (where
this cog exits the log
below), and adjust the
wedges so that block
of wood has the slope
that will make the cog
exit the log where you
want this cog to end.
Use the scriber, with
its locked setting, to
match the bottom
surface of the block
of wood to the scribe
line on the log below
(photo 2). In other
words, the bottom of
the block of wood willmeet the scribe lines
where the next cog
will start.
Repeat this process,
with the scriber locked
at the setting, for the
long groove lines on
the other side of this
block / cog position.
Note that the block of
wood might not be
(and probably wontbe) level, side to side.
Scribe from the bottom of the block of wood down to the log
below, all around.
Move the block of wood along the log and repeat the process
for the next cog. Once all the cogs have been marked onto the
log below, cut them out (photo 3).
Position the upper log back in its original position above the
log below. Re-set the scriber so that its scribe distance matches
the long groove scribe line on the upper log with where each
cog ends (well call this distance SC). Scribe everything you can
reach (photo 4), including the part of the endgrain surface thatyou can reach (photo 5).
To scribe the parts that you
werent able to reach, put the
block of wood into the cog of
the lower log (photo 6). Mark
a plumb line on the edge of
the block of wood so you
know the plumb thickness
of the blockyou need this
amount to adjust your scribe
setting. Re-set your scriber
distance to the SC scribe
setting minus the plumb
height of the block of wood.
Scribe the parts you could not
reach before (photos 7 and
8). These two photos show
why the block of wood must
be wideabout as wide as
the diameter of the log
because, where the upper
surface of a cog is narrow
the lower surface is wide, and
where the upper surface of a
cog is wide, the lower surface
is narrow.
Cut the lightning bolt in
the upper log, and assemble the compound beam.
3Round Logs with Wedges
This beam was made of two round logs that were linked to each
other with a total of 8 pairs of tipped wedges. This beam also got
seven 16mm (5/8) diameter through bolts and small washers.
When loaded, these two beams want to push away from eachother, and the bolts are necessary (for more on the engineering
of compound beams, see the article listed at the end). The
wedges were oak, 60mm (2-3/8) deep.
Make blocks of wood that are about the width and length
shown in photo 9. On top are the two oak wedges, and
underneath is the block of wood well use for scribing.
Snap a centerline on the top of the log below. Mark the log
below for the positions of all the wedges. Screw blocks to the log
below in these positions. The blocks
are set so they are approximately 90 to the top centerline on
the log below. Little wooden wedges/shims are used to adjust
the slope of each block. Position the upper log, and scribe the
long groove (everything you
can reach). Well call this
scribe setting LG.
Now, one at a time, adjust
the slope and side-to-side tip
of each block of wood. The
blocks often have to be tipped
off to the side because, of
course, the long groove scribe
Photo 6
Photo 9
Photo 7
Photo 4
Photo 8
Photo 5
Photo 1
Photo 2
Photo 3
-
8/10/2019 Log Building News - Issue No. 76
4/32
-
8/10/2019 Log Building News - Issue No. 76
5/32
LogBuildingNewsNumber 76
5
THE NEW GENERATION OF LOG HOME CENTER
LPR-80P Log Lathe Milling Machine
The Reliable and Flexible solution
to log rounding and profiling
Super dimensional accuracy of finished logs, guaranteeing the topclass straightness and perpendicularity without efforts. No more aligning
works. No more gaps left between logs.
Incomparably smooth surface quality, no dents or cutting marks lefton the log, even under heavy load cutting.
Maximum reliability and flexibility to tackle the pressure of demandingworkload and the ever-changing customer preference.
SHING MATIC CO., LTD.
Tel: +86-28-8768 6921
Fax: +86-28-8768 6920
Email: [email protected]
For more information, visit us at
www.shingmatic.com /ILBA.aspx
Log length up to 11.5 m (38ft)
Log diameter up to 600 mm (23)
Maximum flexibilityFinish all profiles by one machine
Maximum productivityFinish all works by one-time loading
http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/http://www.shingmatic.com/ -
8/10/2019 Log Building News - Issue No. 76
6/32
Winter 20136
lightningbolt pattern with a plumb line along the faces of the
timbers (red lines in Figure 16).
Each cog is traditionally about as long as the total height of
the compound beam. Each tooth in the cog is about 1/10th the
length of each cog. The end
of every cog is a plumb cut.
(The engineer would usually
prefer that the end cuts
be at a sloping angle, not
plumb.)
Use a dressed piece
of wood (a lath) or a
straightedge to draw the
sloping planes. The width of
the lath, or the straightedge,
must be 5mm to 10mm
(1/4 to 1/2) wider than
the maximum depth of the
teeth. If there is no gap at
all between the two beams,
then the lath or straightedgecan be exactly as wide as the
depth of the teeth.
Lay the lath on the faces of the timbers and line up the bottom
edge of one end, and the top edge of the other end, where the
plumb lines you drew meet the space between the timbers (blue
lines, figure 16).
Now scribe the upper
surface of the block to the
log above using a scribe
setting that is equal to the
LG setting minus L (photo
14). The scribe setting you
use for the below the block
(L) plus the scribe setting
for the above the block
surface (A) must be equal
to the long groove setting.
L + A = LG. Scribe settings
L and A may be slightly
different amounts, but
when added together they
must equal the long groove
scribe setting (LG).
This positioning of a block, and scribing the lower and upper
surfaces of the block is critical for success. This is because the end
of the wedges must not touch both logs, anywhere. In photo 15
the block is in place, where the oak wedges will be. Note that thetop surface of the block comes exactly even with the long groove
scribe lines on both sides. If the wedges touch both logs at one,
or at both, ends, then you can not tighten them.
Once everything is scribed, remove the upper log and cut the
cogs on both logs. Instead of a coped or coved long groove, we
cut flat across from scribeline to scribeline (photo 15) because
we are going to bolt these logs together, and the friction of flat
on flat improves the strength of the connection, and flat-on-flat
removes as little total wood from the logs as possible (less total
wood is removed than would be removed with a coved groove).
4 Sawn timbers with Lightningbolt CogsThe interlocking portions were 50mm (about 2) tall, and
spaced lengthwise by 515mm (20). Again, we connected the
two component beams to each other with seven 16mm (5/8)
diameter throughbolts with small washers top and bottom.
The timbers need to be sawn and dressed on at least three,
or on four, sides. The two sides that will mate do not have to be
planed first, but it is okay if they are. Set the timbers on top of
one another. Do not worry about the small gap between the two
timbers. Mark the midspan of the beam, and work the layout to
the left and right from there. Mark the end of each cog of the
Figure 16
Photo 14
Photo 15
Learn about timber framing
Experience the joy of buildingcommunity through craft
Timber Framers Guild
education inspiration
888-453-0879 www.TFGUILD.ORG
Photo 17
http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.tfguild.org/http://www.loghomestore.com/ -
8/10/2019 Log Building News - Issue No. 76
7/32
LogBuildingNewsNumber 76
7
Testing Deflection
After all four beams were built, they were loaded to
test for deflection. As mentioned earlier, all beams had
the same span, and about the same width and depth
(or were sawn timbers made from logs of the samediameter). The beams were loaded at their midspan
using concrete counterweights (borrowed from a tower
crane)up to a total of 9590 Kg (21,140 pounds) for
three of the beams.
The wedged round log beam can be seen in photo 18
at the start of the deflection test. Photo 17 shows more
than 21,000 pounds of concrete on that beam, and a
very happy (and relieved) Meiri Rohner.
When Meiri loaded the screwed beam, the structural
engineer who was supervising all the tests, stopped the
test at 5480 Kg (12,080 pounds) because adding one more counterweight would have sent the deflection over the maximum he
allowed. After all, the goal here was to test deflection of four compound beams, not break them.
Figure B shows the deflection results for all four beams. The steeper the line, the larger the deflectionas can be seen, the compound
beam made of two sawn timbers that were screwed together
according to the manufacturers specifications had the greatest
deflection. The test on this beam was stopped at 5480 Kg.
The round log lightening bolt was the stiffest of the four
beams. At a midspan load of more than 21,000 pounds it
had less deflection than the screwed beam had at 9,000
pounds. A very impressive result, and gratifying that traditional
joinery methods adapted for round log construction could
outperform the deflection of a beam built with modern
engineered screws.
For more information:
Watch video of the testing at this website:
www.kantti.net/artikkeli/2012/09/hirsiliitosten-kuormitustesti
For more on the design of Mechanically Laminated Beams,
see the article by Ben Brungraber and Joe Miller, in Timber
Framing#93, September 2009, pages 14-21.
Figure B
Each of the 4 beams was tested by loadingconcrete at midpsan and measuring deflectionwith a stretched string. This beam was made ofround logs with wedges.
Nearest to us is the sawn timber lightningbolt
beam; then a mitered truss; round loglightningbolt; and, farthest back, round log beamwith wedges.
Photo 18
Photo 19
-
8/10/2019 Log Building News - Issue No. 76
8/32
Winter 20138
TechTalk T I P S A N D T O O L S
This old wagon was used for haulinglogs out of West Australia forests in the1880s, and is now in a logging museum.Heavy wooden wheels with full-wrapsteel. Both the front and the rear axlesturn. Wire rope cross-ties connect thefront axle and the rear axle, so theyalways turn opposite directions. Veryuseful for making super- tight corners
with heavy loads. As I remember, LloydBeckedorf had modified a semi trailerflatbed to do this to deliver log homepackages on narrow, winding driveways.
Cross-tied wagon axlesPhoto credit: Robert Chambers
http://www.grkfasteners.com/ -
8/10/2019 Log Building News - Issue No. 76
9/32
Elevating the Design Engineering
of Timber Structures
Joe Miller and friends raising a porch bent for his new home.
Licensed in:
USA: CA, CO, CT, DE, FL,
GA, IA, ID, IN, KS, KY, LA, MD,
MA, ME, MI, MN, MO, MT,
NC, NH, NJ, NY, OH, OR,
PA, RI, SC, TX, UT, VT, WA,
WI, WY
Canada: AB, BC and ON
Ben Brungraber, Ph.D., P.E.
Mack Magee, M.S.
Duncan McElroy, P.E.
Joe Mil ler, Ph.D., P.E., P. Eng.
27 Sims Avenue, unit 2r
Providence, RI 02909
401.654.4600 www.FTET.com
Bringing a Modern Perspective
to an ancient craft, Fire Tower
specializes in timber structures
and related systems.
Talk to us about your next project, large or small.
Yes, Its Possible
Contact us today.
(401) 441-5217
www.fraserwoodindustries.com
Timber Products
Green & Dry Timbers
Standard Glulams*
GrainMatchedGlulams*
Pressure-Washed Logs
Timber Services
DryingCNC Fabrication
3D Modeling
Steel Fabrication
*CSA and APA CertifiedCourtesy of Kettle River Timberworks
LogBuildingNewsNumber 76 9
http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://ftet.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://fraserwoodindustries.com/http://www.woodlandia.ca/http://ftet.com/http://www.loghelp.com/ -
8/10/2019 Log Building News - Issue No. 76
10/32
Winter 201310
TimberTools.comYour source for quality tools and service
Timber Tool Forge Hand forged: chisels, scarf slicks,
spuds, draw knives, Lassiter tools and more
Belgiangarnet sharpening stones
SwissPro/HEMA Mortisers, slotters, guide tracks, drillguides, circular saws, skew notchers & tenon cutters,
portable planers, chain beam saws, portable band saws
Serra Saw Mills wide blade technology, electric drive,
perfect production saw for logs up to 3' - 5'-4
REX / Mida 4-sided planers, moulders for reliable
continuous operation
CNC joinery and log milling machines Essetre/Krusi
Land Ark All natural wood finish, also exterior, soft wax
for end grain or polish. Reduces checking.
Double-cut auger bits Cleanest cut, easily powered:
18 or 24 long. 3/8 to 1-1/2 wide
Zentra Drilling system with centering points, from 5/16
to 8, most materials: man-made or timber
Tel: 1-800-350-8176
hats right. The average 2,200 sq. ft. home has over
5280 feet of log joint exposed to the elements. Dont
take a chance keeping out the invasive power of Mother
Naturejoin the thousands of homeowners who have sealed
their home with Log Jam chinking.
When other chinking pulls away Log Jam holds its seal.
Since its introduction in 1985, Log Jam chinking
has been the recognized industry standard
in elasticity, adhesion, and durability. It isalso the only chinking to hold a UL fire
resistance rating. Log Jam doesnt just
fill the gaps, it provides ultimate
protection against the elements.
T
10300 E. 107th Place Brighton, CO 80601
1-800-767-5656 www. sashco.com
Over 1 mile of
Gaps this Wide?
Over 1 mile of
Gaps this Wide?
http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.timbertools.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.sashco.com/http://www.bcltbi.com/http://www.timbertools.com/ -
8/10/2019 Log Building News - Issue No. 76
11/32
1974 1st AGM, at Mackies home, BC
6 founding members: Al Mackie, Art Long, Ed CampVic Janzen, Bernie Legault, & Fergus OConnor. AllanMackie is President; there is serious discussion onmethods of cost estimating.
1975 2nd AGM, at Mackies home, BC
Ed Campbell is President; 24 builders attend (32members total); All agreed that a single afternoonwas not enough time to take full advantage of the raopportunity to exchange information. membershiplimited to those who have built at least one log homof sizeable construction approved by the Association
have taken an approved log building course.
1976 3rd AGM, at Vic Janzens home,South Langley, BC
85 members, Vic Janzen elected President; work begon Log Building Standards, discussion of Ethics withinteaching log construction; about 50 at the AGM(on the agenda: bullshit sessions); the first displayadvertisement ever in our newsletter is for Pat WolfeScribers ($16, including postage); I hope to see thewhen the initials C.L.B.A. are synonymous with good
building anywhere in Canada. Dues are $125 per yAllan Mackie and Ed Campbell plan to direct the CLmanpower in erecting a building in one day.
1977 4th AGM, at Banff, Alberta
Log cabin built in 8 hours and 2 minutes; AGM heldduring the Conference on the Log Structures ofCanada. Janzen re-elected President; 46 membersattended; dues are $50 per year; the Society is officiaregistered in BC; CLBA regalia sashes are available $20; membership is officially closed to Americans. Etdocument adopted. Brian Olynek is Secty-Treasurer.
Victor Nymark (Montebello builder) voted to be anhonourary member.
Vic Janzen remembers:These men were all interesting figures. One left medicine to becomea log builder. Another an American diplomat to Japan. Orchardists.Accountants. High school shop teachers. Regular teachers. Social wo-- so many of us left respectable secure jobs to follow this dream. Thetimes were exactly right for such divergence.
The objective of the project was to naysay the manufacturer builders claimed we were too slow and expensive compared to them
Brian Olynek remembers:I was standing on top of that building wondering, now what am i gto do with this building? when a man named Carl Chulakal offered buy it. We shipped it to his home outside Nakusp!
40OF LOGBUILDINGH I S T O R YY
EARS
LogBuildingNewsNumber 76 11
40thYEAR
INTERNATI
ONALLOG
BU
ILDERS
ASSOCIATI
ON
-
8/10/2019 Log Building News - Issue No. 76
12/32
1978 5th AGM, at Columbia ValleyCommunity Centre near Cultus Lake,British Columbia; Tech Talk at Janzen farm
Art Lloyd is President; John Brown speaks on liftingwith a skyline and on log acquisition; Jack Haden froCMHC on mortgages; the Association is now publishLog Builders News; log builders games; John Browis editing the newsletter; discussion if there are now
many log builders; $50 membership fee; plan to leas30 acres of crown near Mackie School for a permaneCLBA home; One building was liberally pinned withrebar which has hung up the logs. Dont use rebar,Turkey!; Doris Muir wants to organize an internationlog conference.
1979 6th AGM, at Nakusp, BritishColumbia. We are now called WesternCanadian Log Builders Association
James Durham, President; held at Nakusp Senior
Citizens Hall (a log building built by CLBA members 1978); CLBA T-shirts for sale $7; Art Lloyd is editor ofnewsletter; $15 conference fee (includes dinner).
1980 7th AGM, at Golden,BC at Brian Olyneks house
Bill Peyton elected President; BrianLloyd (VP), Lloyd Beckedorf, WaltMurray, John Brown, and more 24 members attended; now
called Canadian Log BuildersAssociation, BC Chapter; thereare CLBA chapters in the Maritimes,Quebec, Ontario, Alberta, and BC.CLBA-BC has a display booth at theVancouver Sportsman Show.
1981 8th AGM, at Golden, British Colum
1982 No 9th AGM?But there was a builders get together at the MackieSchool reunion during Canadian Thanksgiving.
Lloyd Beckedor
John Brown on saw; Jim Durham with foot on log. 1980 AGM.
Early ideas for the CLBA logo
Winter 2013
12
-
8/10/2019 Log Building News - Issue No. 76
13/32
1983 10th AGM, at Mackie School
John Brown is President; membership $10 per year;AGM costs $25; Beckedorf: I really believe that logbuilding . . . is such a young industry. Things which
were standard a few years ago aquickly becoming outdated;Larry Parker attends; pot-lucksupper; slide show.
1984 11th AGM, at Mackie School
Lloyd Beckedorf is president; 143 members; bus touof log homes west of Prince George; Lois Isabelle an
Freda Greenlees are the caterers; Ralph Salm asks thSchool to archive CLBA files; CMHC is working on a home code, and is using the CLBA Standards.
David Rogers remembers:Standing on the porch of theold classroom, observing thegathering at the new classroom,I asked Robert Chambers Whatis the CLBA? Thinking tomyself, How is it differentthan the School?
The Gatehouse at the 1983 AGM.
1983: Allan Mackieand Larry Parker
Dave Gardner demos a slabbjig with Kolve chain (1984).
1984 group photo at the new tool building.
1985 AGM
Gary Pendergrass, David Rogers, Val Rasmussen, Steve Schwartz &Vicki Strobe, and others . . . Tom Hahney teaches Design &Engineering pre-conference session.
1985 12th AGM, at Mackie School
Lloyd Beckedorf is president; Design & Engineering conference course by Hahney; Tom Hahney article athe need for gaskets and infiltration seals in grooves
notches; 57 attend conference; founder Art Long paaway; $25 registration fee; Kyra Guest (Mary Mackieperforms belly dancing; Technical Talk; Chamberson kerfing logs to locate checking.
David Rogers remembers:I had to make a hole in the ice in order to get to the lake water to coafter being in the sauna.
Gary Pendergrass adds:Somehow Dave and I convinced the others that going from Sauna toin the ice was a Rite of passage. ..and somehow we talked all the into giving it a try. Dont think Ive laughed that hard since.
Gary Pendergrass remembers:During a treasurers (?) report, a listed exwas $900 for dishes and silverware. I lookdown at the paper plate I was eating off, a plastic spoon...and interrupted with a qIf we have $900 worth of dishes, why areating on paper plates?. . . It went dowfrom there, with Larry Parker, who was sitbeside me, egging me on with a go get e
LogBuildingNewsNumber 76 13
-
8/10/2019 Log Building News - Issue No. 76
14/32
1986 13th AGM, at Mackie SchoolAllan unveils his new Mackie scribers; David Rogersand Tom Hahney speak on stair railings; RobertChambers elected president; $5,550 in the bank; 21attendees; Hahney gave rave reviews of his newMacintosh computer; Mary Mackie will no longerpublish the CLBA newsletter.
Tom Hahney remembers:When elected to the CLBA board of directors, with the position of
secretary-treasurer, in 1986 it was my first time as a board member,and the first time I had met Robert Chambers, who was chosen as oupresident. The Board gathered in a circle. Robert said that we weregoing to have a newsletter that was focused on the technical skills anknowledge of log building, and that he was asking each member of tboard to submit two articles for the coming year. I remember feeling sense of excitement as I took this in. And indeed, I still feel delight whI get a new edition of Log Building News the glue that throughcommunication has held us together.
David Rogers remembers:Lloyd Beckedorf introduced the butterfly notch, and Allan Mackieshowed us his power scriber concepta grinder with attachments tscore the groove on both logs.
1987 14th AGM, at Mackie SchoolNow is called Canadian Log BuildersAssociation, International.
Jack Sobon, architect and timber framer, is guestspeaker; Randy Campbell on business; Tom Hahneybrought his Macintosh computer; Albie Barden onthermally massive fireplaces; dues $10 per year; 130members; our newsletter isJoiners Quarterly.
1988 15th AGM, at Mackie School
$35 conference fee; first issue of Log Building Newspublished; a full page ad costs $100; Allan Mackiereflects on sharing knowledge between builders, andhow that improves quality; Tech Talk: Timbor (boraterods, Ken Guest and hoof shapers; Duane Sellmanshowed the scribers he is making; Ed Campbell speaon accessing logs; Tom Hahney on stress and strainBeckedorf gets Technical Excellence Award--a paintedantique slick.
1989 16th AGM, atMackie School
Mary Mackie officially honoredas the founding mother ofthe CLBA; Tech Talk: sheepwool as insulation; GarthFarquhar is President; CLBAhas a certificate of deposit thatis paying 10.4% interest.
Mary Mackie, FoundinMother, 1989
Winter 201314
-
8/10/2019 Log Building News - Issue No. 76
15/32
1992 AGM at Sorrento, BC.
1990 17th AGM, at Sorrento,British Columbia
Doyle Burke, engineer; Murray Hardie on exporting;Ralph Salm on roof panels; Tech Talk: braided line fochalklines; $3000 laser level; Wayne Sparshu peelingmachine; Shannon Maris is hired (our first paid staffperson); Association offices will be in Tom Hahneysdesign office; $60 conference fee; singing around thcampfire; Maritimes log builders; Beckedorfs shoes eup in the auction, but beer commands a higher priclife memberships removed by the members at AGM;a few members report they now have mobile phoneBeckedorf reports his double scribe groove has beepatented.
1991 18th AGM, at Sorrento,British Columbia
Terry Hall is President; Membership numbers havedoubled since last year, and we now have 283; Jeff Agives keynote on timber framing; Skip Ackermann b
a 55,000 sf house for Saudi prince in Aspen; CompaMembership is now offered; exports of log shells froCanada are down 20% from 1989; Tech Talk: plate lroll; random-orbital sanders demonstrated; Radomskexplains underscribing; Chambers on log selection;planning starts for 1993 Yellowstone conference--BriLloyd is in charge; Standards Committee works on brevision (meets twice at Radomske School).
Catharine Hansen Remembers:The display of international flags in Yellowstone, the people who travfrom around the world to attend the wide variety of workshops, and buffalo and hot pools we had to dodge on our way back to our cabinat night ~ it was an amazing time.
1992 19th AGM, at Sorrento,British Columbia
Radomske on log selection; Chambers on Kizhi, RussLatvian builders available for US companies; Terry Haon roof systems; major revision of Log Building Standwill be ready in 1993; the Association now acceptscredit cards; Mackie School is closed and buildings aauctioned; Chambers is President and Radomske VicPresident; Commentary column to be added to LoBuilding Standards.
Shannon Maris remembers:A BIG bonfire, a clear night, and a full moon. A group of fellowsfrom Nova Scotia who were on their way, or just back from MaritimeMusic Festival burst out rip roaring a cappella sea shantys late intothe night while those of musical talent used found object such asan empty guitar case to sticks and driftwood on empty beer cans toaccompany the singers with percussion. The annual auction withwacky and wonderful donations, sometime bottles of beer being themost profitable auction item.
Standards Committee meets at Radomske School in 1991.
LogBuildingNewsNumber 76 15
-
8/10/2019 Log Building News - Issue No. 76
16/32
R Chambers, S Greer, T Hahney, E Shure, S Ackerman, K Mogenson, 1995
Shannon Maris Remembers:20th Anniversary Conference at YellowstoneNational Park took every Board person, staffand volunteer hour that could be musteredto pull that one off. We had delegates, loghistorians, authors, craftsman, and legendsflying in from Japan, Finland, Germany.Switzerland, and all corners of Canadaand the United States. A cornucopiaof information exchange, talent, newfriendships, business connections, mentoringand camaraderie. We all needed a two weekvacation after packing up that phenomenalevent.... but WOW! what an event.
Gunnar Granberg Remembers:Im thinking back of those wonderful andexciting days at Yellowstone, it was agreat statement of the skill and vision incraftmanship -- it brought people and ideastogether on an international arena. I havewarm memories of an enthusiastic crowdwho gave, and received, inspiration. Theknowledge must be nourished to stay alive!
Robert Chambers Remembers:Giving my speech at the banquet inYellowstones Glacier Hall in front ofthe largest gathering of log buildersthe world has ever known. Evennow, it gives me goosebumps.
Some of the 500 people at the Yellowstone 20th International Conference
Ole-Karl
Ed Shure Mitered
Banff Truss, 1994
Ed Shure remembers:Since the statute of limitations has passed- I can now share one of mfondest memories. The local logs we had sourced didnt meet Ole-Karspecs, so we cajoled a logger in Northern Montana into felling a loadpeeler poles and running em down to us at the eleventh hour. He muof been up for two or three days straight cause he showed up (with
remnants of a deer carcass on his grill), parked his rig, and disappearThe show had to go on so I committed one felony (and at least a couof misdemeanors) by hot wiring his rig and taking my first drive in anhonest to god 18-wheeler. Roy, wherever you are, Thanks!
1993 20th AGM, at Yellowstone NationalParkNow we are called CLBA and ALBA
Ole-Karl Prois from Norway; Brian Lloyd is ConferencChair; Brungraber and Hahney on engineering; duesare now $35; Henrik Andersen from Denmark; MerleAdams; Ed Levin on roof kernals; Jean Steinbrecher odesign; Hahney and Brian Lloyd on Building Details;
bison traffic jams between Old Faithul and WestYellowstone venues; Doris Muir, Log Home Guide; bigtrade show in Glacier Hall; Duane Sellman wins WorlNotching title; perhaps 450 to 550 people at theconference. Cathy McIntyre (Hanson) assists; Ed Shuelected President. Log Span Tables now published byCLBA.
1994 21st AGM, at Banff, Alberta
John Brown on kiln-dry logs; Ed Shure - Tom Hahneywith mitered truss demo; new Constitution, Bylaws
and Code of Ethics adopted; Tom Stonecipher andBrian Lloyd on construction contracts; Log SpanTablesnow published by the Association; Shurere-elected President.
1995 22nd AGM, at Banff, Alberta
Steve Loken on resourceful building; Hahney retiras Treasurer (14 years), and CLBAI has $50,000 in thbank (from Yellowstone); 202 members.
Winter 2013
16
-
8/10/2019 Log Building News - Issue No. 76
17/32
Stephen Kemper, Barry Houseal, Jerry Wait in 1999
On the Whistler log home tour.
24th AGM at Herrison Hot Springs, BC.
1996 23rd AGM, at Duluth, Minnesota
North Shore tour of homes; Thierry Houdart fromFrance; Latvians: Egils, Gintis, & Karlis Apinis; DavidSalmela on design; Ed Miller dovetail jig and MikeHeintzman tenon and drill jigs; 233 members; Ed Shis President; our Association gets its first email accou
1997 24th AGM, at Harrison Hot Springs,British Columbia
Steve Badanes of Jersey Devil is keynote; CLBA contrafor building is for sale; CLBAI gives $2000 to start theBC-LTBI; hydraulic peeling spud; Mafell hand-heldbandsaw; Makita curved base planers make their firstappearance at Tech Talk. Robrt Savignac and John Band others create Log Home: From Land to LockUpour first publication for customers.
1998 25th AGM, at Whistler,British Columbia
Tour of local homes; Ric & Matheo Durfield; SteveKemper with hydraulic chainsaw and drill; Jay Wan Yattends from Korea; Tracy Wakefield from Australia;Wayne Sparshu on jobsite efficiency; James Mitchell using short logs for construction.
1999 26th AGM, at Glenwood, Colorado
Tour of Aspen and Snowmass log homes, many byAckermans; Barry Houseal with a non-settling buildingasket demo; Osborne buffing brushes demonstratedLateral Loads research - Hahney presentation; TenonShannon Maris retires from Association after 9 years;BC apprenticeship program being established; CathyHansen hired and Association offices move to LumbyBC; Builder Certification initiative is underway; 400members: CLBAI now has a website.
Shannon Marisretires after 9 yearsas Associationadministrator.
Number 76 LogBuildingNews 17
-
8/10/2019 Log Building News - Issue No. 76
18/32
Left to Right: Rouleau, Savignac, John & Ingrid, Ann Miks
2000 27th AGM, at Montebello, QuebecNow we are the International LogBuilders Association
Two-day pre-conference design workshopwith Jean Steinbrecher; Round MeetsSquare gazebo workshop with Shure,
Chambers, & McCarty goes into extra innings; 250 members; Standardsare now French; Gary Espe demonstrates lasers onscribers; Jim Grieb scribers unveiled; JohnBoys is President. ILBA buys office buildin
2001 28th AGM, at Kananaskis, Alberta
John Boys is president; Ann Miks is hired; Robert Savgnac hired as Executive Director; draft of the ChinkinStandards; Chambers leads two Accelerated hands-oworkshops; Jerry Rouleau workshop on marketing;ArchiCAD workshop; Dalibor Houdek speaks about h
research on fire and log walls.
2002 29th AGM, at Park City, Utah
Tom Hahney on settling jacks; Compound Log Joinepre-conference; French Scribing; Jerry Wait is Presi-dent; scientific testing of lateral stability of log walls;Savignac co-chairs ICC committee for log home cod
1st Fall Rendezvoin Cherryville, BC Mary Mackie speaFrederick Brilliant
French-scribe workshop; saddle notchworkshop. RobrtSavignac organizesand spearheads aEuropean log building summit, held iSweden. Board development retreatsat Sugar Lake andCanmore.
Robrt Savignac remembeThe French-translation group gotstuck on the title of the documenLog Building Standards... therewas no consensus on how LogBuilding should be translated.
Maisons en billots, maisons enrondin, maisons de bois brut,maisons en bois rond, constructioen fustes. We had trouble gettingpast the first TWO WORDS!
Cutting an Accelerated shell.
Duane Sellman explains
something technical.
Gary Espe shows laserscriber.
Wayne Sparshu with hisscaffold. Joel and Robrt atop gazebo.
Ann Miks Remembers:My favorite memory and onehat I treasure, is the firstide show that I attended in000. It showcased the most
ncredible work that I had evereen. It truly took my breathway. I was so proud of all
f the builders that made uphe ILBA and to think thathey allowed me, Ann Mikswho knew nothing about loguilding) to be a part of thispecial group.
Winter 201318
-
8/10/2019 Log Building News - Issue No. 76
19/32
2003 30th AGM, at Alymer, Quebec
Dave Gardner is President; Jean Rodrigue stair works367 members; $480,000 in revenue this year; $484,in expenses; Les Jozsa speaks on wood technology;Simon Auger and Ron Hann win notching competitiJig Book is published; Builder Certification Program istabled.
2nd Fall Rendezvous, in Cherryville, BC John
Boys and Mark Fritch instruct chinked dovetail cours(cabin sold for $29,000); Russell Joseph tool system demonstrated.
2004 31st AGM, at Parksville, BC
Gazebo project with Egils Artmanis, DuanSellman, & Dai Ona; raw oysters off the rowith Tim Bullock; Cyril Courtois on animain design; Dietrichs 3-day workshop onCAD design; Design expo; Russell Josephwith jig for cutting arc windows; the auctraises $45,000; 500 members; Mark Deagchampion of competition; 3rd annualrendezvous cancelled; Del Radomske recethe 1st - ILBA Grand Achievement Award.
Robrt Savignac Remembers:Cathy & I worked hard to develop greater Boardresponsibilities and participation, organizing special boretreats & planning/vision sessions.
Ron Hann, FrederickBrilliant, and Simon Auger
Del Radomske receivesGrand AchievementAward from John.Parksville gazebo project.
Number 76 LogBuildingNews 19
-
8/10/2019 Log Building News - Issue No. 76
20/32
Cathy and Mira.
2005 32nd AGM,at Coeur dAlene, Idaho
Jeff Patterson is president; 8-week 17,000 kmRoad Trip is announced; Tom Hahney gets GrandAchievement Award; Simon Auger is notching chamJeff Pedersen conducts hands-on dovetail course atAGM; Wil Dancey conducts timber frame course;$40,000 raised in auction, Tom Terry auctioneer;Canada GST levy on US members hit us; Savignac letgo; Cathy on sick leave; financial strife for Associationattacks posted on LHOTI are baseless; conferenceworkshop for kids.
Tom Hahney remembers:One of the great honors of my life was tobe given the Achievement Award in 2005As I remember that moment now, it was unexpected, I can still be knocked over wa feather!
2006 33rd AGM, at Montebello, Quebec
ICC log building code development is underway; auc
tion brings in $59,000; Higgy Jigger; Robert Chambegets ILBA Grand Achievement Award; Ed Campbelladdresses the members; Ingrid Boys provides histori-cal and scriber displays; compound roof course. PattyLaFrancois organizes conference; Ed Shure is presidemembers now must apply annually to join.
Ed Campbell remembers:Giving that speech was one of the proudmoments of my life . . . .I am always interested to the progress ofthe organization that I helped to form anhave deep respect for those individuals wwork so hard to further the interests of th
industry. My hat is off to all the log buildwho keep this industry alive and thriving
2007 34th AGM,at Abbotsford, BC
Log Grading by ALS nixed; majorrevision to Constitution andEthics; ICC-400 Code is adopted;Chainsaw carving with MikeMcVay; Litller brothers win. AnnMiks hired as office Administrator.
Ann & Andree at Montebello 2006
Higgs Murhpy with his Jigger.
Team Littler competing.
Brian Lloyd Remembers:One evening at Montebello I
walked into the bar where Ifound Allan Mackie sitting alone,surprising enough... I picked up abeer and sat down with Allan. Helooked up slowly and told me thatwe were among the very few OldLog Builders at the conference.I aged considerably at thatmoment!
-
8/10/2019 Log Building News - Issue No. 76
21/32
Rob with ChambersScribers at Tech Talk 2009.
2008 35th AGM, at Whitefish, Montana
Logworks Helper pricinprogram available (creaby Dai Ona & John BoyLog Building News now color; SketchUp workshwith Egils Artmanis andClark Bremer; Toshio Owood sculpture; Mira
Steinbrecher awarded bILBA; Katrina Koebelreceives design award.
2009 36th AGM, at Cable, Wisconsin
Our first joint conferencwith Great LakesLogCrafters Associationwork starts on what
will become EffectivePractices & Methods;Dusko Ballmer on scannlogs and cutting withCNC machine; Ed Burklog grading workshop;Finns and Estoniansat conference; cranecertification workshop;sill log layout; David Roon log repair.
2010 37th AGM, at Prescott, Arizona
Manitowoc crane demo; Effective Practices adopted;new Incremental Accelerated video shown by ChamArcosanti tour; Earl Laverty explores ILBA vision.
Catharine Hansen Remembers:I miss: the annual conferences, hugs from Uli Walther, a glass of wineRobert Chambers, Kat Koebels infectious smile, watching John Boys aLloyd Beckedorf out bid each other at auctions. . . the list goes on!
The Finns: Raimo, Hannu, Henrik
John Boys & Jim Grieb
Ed Burke teaches log grading.
LogBuildingNewsNumber 76 21
-
8/10/2019 Log Building News - Issue No. 76
22/32
2011 38th AGM, at Niagara, Ontario
Centerline dovetail workshop with Higgs Murphy;Peter Gott keynote; John Boys brings Buster; WaynSparshu buys Mackie axe for $2100 in auction; LBNgoes 100% digital; Chambers on new underscribemethod; Dalibor Houdek on Canada energy codes;Dan Wait on low-tech kiln; Chinese businesswomanattends and wants to buy hundreds of log shells.
2012 39th AGM, at Asilomar, California
First joint conference with TFGNA; Dietrichs10-year anniversary; EP&M published in paperand digital; Chambers speaks on Dreams & CreativityBrungraber and others break joints; Higgs, Preston,and Whitehouse hands-on lofting and more; Uli Walt
on marketing.
Peter Gott and John Nininger
Matt Davidson first in notching.
Ben Brungraber shows how easy it is forhim to break things that timber framershave carefully built.
Winter 2013
22
40thYEAR
INTERNATI
ONALLOG
BU
ILDERS
ASSOCIATI
ON
-
8/10/2019 Log Building News - Issue No. 76
23/32
LogBuildingNewsNumber 76
23
TechTalk T I P S A N D T O O L S
Photo credit: Robert Chambers
Detail of a drain hole carved
about 900 years ago, in thesill log of the Borgund StaveChurch. The hole drains waterso it wont collect in the groovethat accepts the thick verticallog siding above the sill log.
Many of the large logs in this1600 AD farmhouse were free
of heart center (FOHC) -- thebuilders must have producedtwo oval house logs from eachtree.
Norway Provides Historical Gems
http://www.timmerhusinc.com/tools/ -
8/10/2019 Log Building News - Issue No. 76
24/32
Winter 201324
TechTalk T I P S A N D T O O L S
Photo credit: Robert Chambers
Probably the oldest log building I sawin Norway, the Bjolstad Chapel. The stavechurches are older (as old as 1050 AD), butare log post and beam, not horizontal scribe-fit log. This church was round log, not oval,had full long grooves, and diamond notches
in the cornerssaddle scarfs top and bottom.The fits were superb.
This large barn (obviously still being used bythe farmer) was built on sloping land. Thelow corners were held on log corners (piers).It looked very tippy to me, but had been inplace for many hundreds of years. The secretis that the log pier is a triangle in plan. A
solid log-wall triangle very stable. The logsof the back wall (under the barn) are tipped,of course, because they have to cross downto the round below. I have drawn yellow linesthat indicate half of the logs of the back wall.
Summer Beam Books
www.summerbeambooks.com
specializing in timber framing
and related topics
2299 Rte 488
Clifton Springs, NY 14432
toll free 877-272-1987
315-462-3444
Charlotte Cooper, owner
http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.summerbeambooks.com/http://www.rsmdrafting.com/http://www.structure1.com/http://www.summerbeambooks.com/ -
8/10/2019 Log Building News - Issue No. 76
25/32
LogBuildingNewsNumber 76
25
Log Buildingin SwitzerlandBy Roger Porrenga
Blockbauis the Swiss word for buildings with crossed corners,
that includes also boards from 1 inch thickness, and up to Log
Buildings. In the region around Zurich and the Lake Greifensee,in 1975 was found a log building (actually Pfahlbautena
building on stilts) that dates from 1050 BC. The first round was
in the mud, under water, anchored down with pins, the log walls
were then erected on that round, so that it not was sinking in to
the mud. This is the oldest found in Switzerland, so far.
In the Alps is where most new log buildings are being built
now in different styles, most with hewn logs for homes and
round log for farm buildingsfor example, hay sheds with wide
roofs.
In the mid-1990s North American style log construction
started to come to Switzerland. In the beginning, there werejust a few log builders and they used the saddle notch and the
techniques we were taught mostly in North America.
We started also to use old carpenters knowledge and mixed
that together. with our new North American log building
training. We made buildings with modern interiors, mixed with
steel, concrete and colors. Swiss peoples taste is mostly modern,
and not very rustic.
Everything went fine, until the Swiss Heimatschutz(protecting
architectural heritage) in 2007 wrote to all the building
regulation departments, in almost every town, that they should
not accept log buildings (made with round trees) anymore,
because the overhang at the corners were too rough, the
building style was too simple and it is a step backwards in
craftsmanship. They also questioned the aesthetics of log
buildings.
The log builders were shocked, all the work we had done in
10 years, was it for nothing? A handful of log builders came
together and we founded theIG Blockbau Schweiz(Swiss
Photo credit: Roger Porrenga
Log home in Mllheim, Switzerland.Saddle notch, character logs, modernkitchen, stainless steel details.
Logbuilders Association) and we tried to contact Heimatschutz
to discuss the situation, but there has not been one discussion or
meeting until recently.
We wrote to all the building regulation departments a paper
that tells our views. We try to build every house better and
better, and at the end the market will regulate everything
(mostly).
http://www.herrmannframes.com/ -
8/10/2019 Log Building News - Issue No. 76
26/32
Winter 201326
A few years ago, it was not easy to fulfill the energy efficiency
requirements as they got harder and harder. Now we usually are
able to fulfill those standards, because there are different ways to
calculate.
I wont go into the complicated details here, but the log
diameter should be 44 cm+ (17+) in the middle; the tip should
not be less than 38 cm (15). Grooves and kerfs and corners
have to be carefully and proper insulated. We use mostly sheep
wool, because its organic and last a long time.
This is not new technique. I have helped to renovate a350-year-old house, and the wool we took out of the wall,
looked just as it did when it came off the sheep. Sheep wool
is able to take 1/3 of its weight in moisture and still insulate.
Mineral wool or glass wool, fiberglass is not able to do this.
Sheep wool is able to take building toxics such as formaldehyde,
absorb it, and keep it locked inside. At times we also use gaskets.
The windows must have 3 sealed panes of glass. The roof has
to be insulated very well to 24 cm+ (9-1/2) I usually prefer
the insulation made of wood (cellulose insulation).
All connections and joinery have to be airtight. If you have a
controlled air ventilation with heat recovery, the required energy
efficiency number is easier to reach. The regulations are going
to be more and more specific as time goes on. The idea is to
produce less and less CO2.
So, you may get a bonus for heating with a new clean-
burning woodstove, geothermal, passive solar etc. If you have
photovoltaic you get a bonus and so on.
What kind of sense does it make to insulate a house with
styrofoam etc. that is made out of oil and a lot of energy? Some
articles report that with the energy that is used to make foam
insulations you could heat a house for 20 years.
Historic grain storage building built of log.
Photo credit: Roger Porrenga
The only direction we can go is to minimize the grey energy.
That is where the log buildings and other wooden buildings have
their strength. Wooden houses store a lot of CO2. An example: a
house with 250 cubic meters of wood-volume stores 62,000 kg
(135,000 pounds) of carbon. There are wooden houses in Russia
that are more the 1000 years old. The oldest wooden House in
Switzerland is 750 years. We are talking about a lot of life cycle
storage of carbon.
http://www.dietrichsna.com/http://www.herrmannframes.com/ -
8/10/2019 Log Building News - Issue No. 76
27/32
LogBuildingNewsNumber 76
27
BRODA finishes were developed by a loghome builder
from Whistler, to deliver mountain- tough durability witheasy maintenance. Visit our web site. Download
our free spec guide for loghome builders and find
out more about our water- borne natural oil finish,
water- based acrylic clear- coats and urethanes.
While youre there, check our gallery to see how
other builders have used BRODA. Because
longer-lasting finishes are
more fun for everyone.
cbrproducts.com/rather be playing
FREE Spec Guide: www.cbrproducts.com/ratherbeclimbing For samples, call toll- free:1888 3115339
Support the advertisers who support Log Building News. Its a win-win situation
http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://cbrproducts.com/http://woodlandia.ca/ -
8/10/2019 Log Building News - Issue No. 76
28/32
Winter 201328
C L A S S I F I E D A D S
F O R S A L E
Building logs for sale- regular and oversize. Fir Cut to peeler lengths
mainly 43 and 52 ft. Trees were harvested in fall 2010 and some in
winter 2011. Good straight logs for building - approx 200 cu m. Also
oversize logs for Timberframe stock. Woodlot 454 Golden BC.
250-344-4646.
1999 Heartwood Band SawmillModel 310 Electric Never beenused; 6 Double-Cut (cutting travel speed up to 3 feet per second
forward or reverse). Will require 600 Volt 3 Phase Power or motor
exchange. The only noticeable noise this mill makes is the actual blade
cutting through wood. Eighty-eight feet of track; operator travels
with mill head along track. Numerous track-mounted hydraulic log
handing systems and full programmable computer controlled set
works. (We purchased 2 and only set one up for use.) Purchased in
1999, replacement value of this unit today is over $130,000 Canadian.
Asking $65,000.00 Canadian, will require some site preparation
and assembly. To compare this to any of the small bandsaws is like
comparing a hi-way tractor/ trailer to a go-cart, this is a serious
production mill. We often can go three weeks between bandsaw
blade sharpenings! Please arrange for an appointment to see the twin
unit in operation. Link to this model at Heartwood Saw: http://www.heartwoodsaw.com/Model_310.html. Email to info@moosemountain.
com or phone toll free 1-877-932-3992 Lloyd Beckedorf, Moose
Mountain Log Homes Inc.
Logworks HelperPricing program specially written for fast and
accurate takeoffs and quotes of log home shells. You can customize
it for the pricing methods and preferences you currently use. Note:
you must own a copy of Microsoft Excel to run Logworks Helper.
Developed by Dai Ona with help from John Boys. Contact Ann at
the ILBA offices for sales and enquiries. CDN $500.
Hand scribed Log Home Projects CD called Drawing Dreams - a
selection of 24 log home projects. A CD of 24 log homes $19.99 tax
and shipping included. Call 1-877-832-0165 RSM Drafting Services Ltd.
House logs for sale We are selling dry and semi dry Lodge Pole Pine
and Engelmann White Spruce house logs. We ship Worldwide.
Please phone 780-674-6325 or email [email protected]
Northern White Pine Building Logs available in most sizes and
lengths. Winter Cut from Quebec. Please contact: Select Log,
Fred Temperton, 2899 Stella, Rawdon J0K 1S0
Phone: 514-867-5430 Email: [email protected]
H E L P W A N T E D
Experienced full-scribe log builder wanted for year round, full-time
work. Big White Pine logs. Good working conditions, minimal travel,
good pay and benefits. Rural and beautiful Northern Vermont near
Connecticut River and White Mountains of New Hampshire. 3 hours
from Boston, Montreal and coast of Maine. Outdoors oriented person
with good woodworking and math skills. To apply send or email
resume and references. The Wooden House Co., Ltd., 3714 North
Road, S. Ryegate, Vermont to Newbury, Vermont 05051. Phone: 802-
429-2490, email: [email protected]
Need 2 experienced log buildersimmediately until the fall for sure.
prefer builders with dovetail experience. This is in the Smithers area,
a full four season adventure. contact Bryan at
LOG BUILDINGTOOLSSTARRETT & MACKIE scribers; heavy duty drawknives up to 30; peeling spuds;chopping & finishing axes; broadaxes; adzes; GRANSFORS axes; ENGLISH slicks;ROBERT SORBY, HENRY TAYLOR, FOOTPRINT & PHEIL chisels and gouges;JAPANESE slicks, chisels, saws, ink lines & flex squares; hand-forged Flarens,shovel gouges, flat & scarf slicks, drawknives & draw-gouges; BARR Specialty
Tools; peavies; cant hooks; lifting tongs; log dogs & cleats; log horses; waterstones; Diamond whetstones; NORTHWEST calipers, tenon cutters & long augerbits; ship augers; chainsaw mills & attachments; MAKITA & MAFELL planers, saws& chain mortisers; MACKIE log building books & videos.
MAGARD VENTURES LTD.
Attn: Maurice Gardy
8365 Domagala Road, Prince George, BC, Canada V2K 5R1
Tel: 250-962-9057 Fax: 250-962-9157
[email protected] www.logbuildingtools.ca
FREE32-pagecatalogue
A Boys Big Book of JigsA Log Builders Reference to Jigs, Tools and Techniques
An informative book on jigs and work methods specific
to our trade. Sections include: Scribing and Layout,Stairs and Railings, Cutting and Drilling, Stairs and Railings,
Holding, Mills and Machines, Lifting, Work Methods,
Accessing Heights, Resources, Cool Tools and New Stuff.
Available to ILBA members only
Convenient binder format allows additional
information to be inserted
Price $95.00 CAN plus shipping
To order, contact the ILBA ofce at 1-800-532-2900 or
250-547-8776 or email [email protected]
JIG BOOK- - - -
ON SALENOW!
http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.logbuildingtools.ca/http://www.permachink.com/http://www.logbuildingtools.ca/http://www.streamlinedesign.ca/ -
8/10/2019 Log Building News - Issue No. 76
29/32
LogBuildingNewsNumber 76
29
C L A S S I F I E D A D S
H E L P W A N T E D
Log Builder/Timber Framer We are seeking
to fill a position requiring the following skills:
Timber Framer; must have 4 year journey-
man certificate in the European Tradition
(Zimmerman), or equivalent in experience. Lo g
Building: mastery of scribed, post and beam anddovetail log construction.
Other Assets: working knowledge of CLT (Cross
Laminated Timber) Technology, roof math and
roof layout for the purpose of massive log to log
and timber to timber connections and joinery.
Experience with hand and power tools; including
chainsaw, planers, routers. Valid drivers license.
Must be able to read plans, work independently
as well as integrate with our existing team.
Computer drafting skills are an asset but not
required. Hourly pay: $20.00 $24.00 hr
commensurate with skills.
Our company is located in Merritt BC. To apply:
Experienced quality orientated log builders
needed. Moose Mountain Log Builders is
looking for experienced log builders who would
enjoy interesting projects to work on in the
Calgary area, in Cochrane Alberta. Earnings
based on experience. Please call Kevin at
1-587-433-6719 or Lloyd if Kevin is unavailable
at: 403-932-3992.
Legendary Logcrafters Limited is a handcrafted
log home producer in Collingwood Ontario. Due
to a consistent annual growth, our company is
adding multiple positions from apprenticeships
to experienced log home builders. Legendaryoffers highly competitive wages and a very
structured work environment. Please email
resume to [email protected] or fax
705-444-6675 or call 705-444-0400.
Full time log chinker. Full time log hand
crafterand timber framer. For both of these
positions we require years of experience and
references. Contact - Southwest Log Homes, Inc
Email: [email protected]
Log Builder Required in Scotland
We seek to employ a log builder to assist with
building fully scribed and Post and Beam LogHomes in the Scottish Borders.
Applicants should have a minimum of three years
experience in building Full Scribe Log Homes
using the over scribe technique, and Post and
Beam Log Homes. The applicant should also be
able to work from plans, work unsupervised,
and holds either a British or EU passport or a UK
working Visa. Wages to be discussed depending
on experience. Please contact John via e-mail:
H E L P W A N T E D
Log Builder WantedLog Home Builder career
opportunity available with a progressive, quality
oriented, full service log home company.Edmonton area, permanent full time, year round.
1-2 years experience, must have own tools and
transportation, wages are $18.00-$30.00/hr on
piece work. Fax resume to 780-460-2584.
The Log Connectionis currently seeking
three to four highly motivated, enthusiastic
individuals to become part of our designteam. Two positions are available for drafters
with a minimum of two years architectural
CADD drafting. Two positions are available foraccomplished drafters/designers with ability to
complete highly detailed log home construction
drawings within a specified time period is adefinite asset. Duties will include the creation
of working drawings for custom log homesbased on preliminary designs, production
design and detailing, shop drawings as well as
modifications to existing designs. Scope of workmay range from medium sized residential to
large commercial projects. Preferred experience
would include log home design/drafting.Provide resume and samples of past CADD
work, attention to: Mr. Dave Sutton, The LogConnection, 129 Nanaimo Ave. West, Pentict on,
BC Canada V2A 1N2.
Daizen Joinery Ltd.is looking for full time, HSB
CAD operator and K2 machine operator, timber
frame production assistant. Please contactDai, 250-679-2750 or email [email protected]
Big Foot Manufacturing Inc. in Tappen British
Columbia is looking to hire a qualified TimberFramer with CNC experience. We are currentlyexpanding our product lines now that we are
entering the North American market. The ideal
candidate will be a journeyman Timber Framerwho has experience operating a Hundegger k2.
This person will be responsible for processing
and fitting final pieces and may be required todo some on-site erection. Please email resums
in confidence to: [email protected]
or deliver them in person to: Big FootManufacturing, 3380 Ford Road, Tappen B.C.
Confort Natureis looking for an experienced
log builder who will be in charge of production.
As a hands-on team leader, he will be responsibleof log shell construction from blueprint reading
to quality management. As a small company
looking to develop and always get better, we willgive a lot of place to your ideas and techniques.
We are located in Quebec, 100km north of
Montreal, in the beautiful region of Lanaudire,next to Saint-Donat and Mont-Tremblant
Park, nearby lakes and mountains. Lets buildsomething together! Please contact us via email
at [email protected] or phone
1-877-424-3525.
H E L P W A N T E D
Draftsman with Dietrichs CAD experience.
Must have full working knowledge of the
Dietrichs Program, and hands on experience
in wood engineering and/or massive log and
timber joinery. Wages - 21.00 to 24.00 per hour
- please e-mail applications to: Nicola LogWorks,
attention: John Boys. [email protected]
John Devries Log Homes, a small upscale
company operating in Rural Eastern Ontario
since 1976 seeks an experienced log crafter
preferably with hands on supervisory experience
that can read plans and manage projects. We
foster a dynamic, creative, solution oriented
work environment that emphasizes quality while
attempting not to sacrifice productivity (that
elusive log builders Holy Grail) in a structured
but fun atmosphere. (At least we think its fun) It
would be helpful (but not required) if applicant
has timber framing experience as well. Salary
dependent on experience. Plenty of lakes, great
fishing, hunting and other outdoor recreation.2 hours to Toronto or Ottawa (for some
serious city fun) Call to Martin or Martin to
discuss at 613-478-6830 or e-mail
W A N T E D
A set of Gearhead Scribers Please contact:
Leo Scales - [email protected].
603-846-5703.
Looking for work in the northwest. I have
23 years of professional full-scribe log building
experience. I am only available for short term
temporary work, labor fine also. Patrick Dalton(907) 803-0092 [email protected]
and website www.daltonlogshells.com
Traveling Timberwright Professional Finish
Carpenter for Scribe Fit and Post & Beam
structures. 30 years accomplished tradesman in
this field. Mobile, with extensive selection of
tools. Honest and Reliable. Contact:
RALPH CLEGG 604-740-2404 BC Canada.
A N N O U N C E M E N T S
Island School of Building Arts 3199 Coast
Road, Gabriola, BC Tel: 250.247.8922
www.isba.caFall 2012 courses:
*Building with Logs - Sept 3 - 28, 2012
*Timber Frame Post & Beam - Oct 1 - 26, 2012
*Timber Frame Bents - Oct 29 - Nov 23, 2012
New Short Courses:
*Custom Door Making - July 23 - July 27, 2012
Concrete Counter tops and Sketchup - Stay
tuned to our website for additional information
on these new short courses.
-
8/10/2019 Log Building News - Issue No. 76
30/32
Winter 201330
FOR MORE INFORMATION
Ann Miks, Administrator
International Log Builders Association
P.O. Box 775
Lumby, British Columbia Canada V0E 2G0
800-532-2900 toll-free
250-547-8776 phone
250-547-8775 fax
www.logassociation.org
2012 ILBA Board of Directors
President
Higgs Murphy
Email: [email protected]
Vice-President
Earl Laverty
Email: [email protected]
Clerk
Liberty Lewis
Email: [email protected]
Treasurer
Martin Slager
Email: [email protected]
Directors
Ron BrodiganEmail: [email protected]
Robert W. Chambers
Email: [email protected]
Konrad Gallei
Email: [email protected]
Noah Hedges
Email: [email protected]
Dan Wait
Email: [email protected]
C L A S S I F I E D A D S
A N N O U N C E M E N T S
As a seasoned professionalor student, journey throughthe fundamentals and variedcomplexities of timberframing in James Mitchellsnew guidebook on Timber
Frame construction.For more information visitwww.MastersGuideBook.com
West Coast Restoration LLCis pleased toannounce that they offer complete restorationservices, insurance litigation support andconsulting. Call Bill Finley at 360-961-3220 oremail: [email protected]
S E R V I C E S
Brian Lloyd Construction Consulting Industry Consulting Building Inspection
Expert Witness Conflict ResolutionVernon, BC Tel/Fax 250-549-3821email: [email protected]
Drafting and Design Services - RSM DraftingServices Ltd.is a freelance drafting and designservice that specializes in log and timber framebuildings. We have been Drawing Dreamssince 1977. We have a CD of 24 log homesavailable for $19.99 all taxes and shippingincluded. Contact Bob at www.rsmdrafting.com.Email [email protected] or call1-877-832-0165 toll free Ask me firstBuilding design consultants.
Fire Tower, bringing a modern perspectiveto time-honored craft, specializes in theengineering and design of new and existinglog and timber structures. Licensed in BC, AB& ON and 31 States.Fire Tower Engineered Timber, Inc.Mack [email protected] Sims AvenueUnit 2R, Providence, RI 02909Phone: 401-489-4567Fax: 401-441-5218www.ftet.com
FraserWood Industries Mack MageeFraserWood is a pioneering, full-service
provider of innovative timber products andservices committed to extending the reachof natural timbers in built environments.Mack Magee27 Sims AvenueUnit 2R, Providence, RI 02909Phone: 401-489-4567Fax: 401-441-5218email: [email protected].
T R A I N I N G
FREE Log Selection Calculator Go to www.LogBuilding.org and then click on FreeInformation. From that page choose the logselection calculator and download it to yourcomputer. Requires Excel software to open anduse this file. It gives you T-1, T-2, B-1 and B-2for any set of logs.
Space Available
Advertise TODAY!
40thYEAR
INTERNATI
ONALLOG
BU
ILDERS
ASSOCIATIO
N
The ILBA 40th
Anniversary conferencewill be held in sunny
Arizona, April 4 to 7.
GetReady!!GetReady!!
Effective Practices& Methods
The ILBAs new
publication EP&M
is available for
sale online at
the ILBA websitewww.LogAssociation.org.
You can buy and download a
PDF file, or the paper book.
-
8/10/2019 Log Building News - Issue No. 76
31/32
LogBuildingNewsNumber 76
31
Advertisers in This Issue
A Boys Big Book of Jigs . . . . . . . . . . . . . . .28
BC Log & Timber Industry. . . . . . . . . . . . .10
CBR Products. . . . . . . . . . . . . . . . . . . . . . . 27
Dietrichs . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Fire Tower Engineered Timber Inc. . . . . . . .9
Fraser Wood Industries . . . . . . . . . . . . . . . .9
GRK Fasteners . . . . . . . . . . . . . . . . . . . . . . .8
Lignomat USA . . . . . . . . . . . . . . . . . . . . . . . 4
Log Home Store . . . . . . . . . . . . . . . . . . . . . 6
Magard Ventures Ltd . . . . . . . . . . . . . . . . .28
Nicola Log Works . . . . . . . . . . . . . . . . . . .32
Pat Wolfe Log Building . . . . . . . . . . . . . . . .4
Perma-Chink Systems Inc. . . . . . . . . . . 4, 28
Precision Structural Engineering . . . . . . . .24
RSM Drafting. . . . . . . . . . . . . . . . . . . . . . . 24
Sashco. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Schroeder Log Home Supply. . . . . . . . . . . .9
Sherpa Timber Connection . . . . . . . . .25, 26
SMTC Manufacturing . . . . . . . . . . . . . . . . .5
Streamline Design . . . . . . . . . . . . . . . . . . . 28
Summer Beam Books . . . . . . . . . . . . . . . .24
Timber Framers Guild . . . . . . . . . . . . . . . . .6
TimberTools. . . . . . . . . . . . . . . . . . . . . . . . 10
Timmerhus . . . . . . . . . . . . . . . . . . . . . . . . 23
Wayside. . . . . . . . . . . . . . . . . . . . . . . . . . .31
Woodlandia. . . . . . . . . . . . . . . . . . . . . .9, 27
Joining the ILBA
Membership in the International Log Builders
Association is open to any interested person.Members gets one year of Log Building News,
membership certificate, voting privileges,
discounted conference registration, a listing in
the Annual Directory, a copy of the Association
Constitution and Bylaws, use of computerized
help wanted and work wanted ads, and all ILBA
mailings and notices. Company memberships
have additional benefits. The ILBA accepts Visa or
MasterCard. For more information on dues and
member benefits, please call the ILBA office at
800-532-2900.
in our next issue
Coming up in Log Building News 77
Arizona Conference and 40th AGM
Pre-Conference Workshops
Tech Talk and Tools
Safety Gear by Ron Brodigan
SUBMIT YOUR ARTICLES TODAY WE WANT TO HEAR FROM YOU!
How to Get Log Building News
Articles, photos and letters are welcomed.
The deadline for LBN 77 is Jan 15th, 2013.
If you submit articles in Microsoft Word
on CD or by email, send them directly to
the ILBA office.
Back issues of Log Building Newsare
available from the Association office.
Call 800-532-2900 to order.
Copyright Notice
Log Building Newsis copyrighted in Canada
and the United States. Express written
permission is required from the ILBA and,
in some cases, from the author, before
any article or photo can be photocopied,
distributed or republished. Contact the
ILBA office for details.
Disclaimer
The views and information expressed in
articles and ads appearing in Log Building
Newsare those of the authors of those
articles and
ads. The
International
Log Builders
Association
assumes no
responsibility for
the accuracy of
the information
contained
herein and
does not edit or
investigate any
article or ad for
that purpose.
Advertising
Log Building Newswelcomes advertisers.
Please contact the ILBA office for
deadlines.
Log Building Newsis a great way to contac
the best log home builders. The ILBA is th
largest group of builders of handcrafted
log homes in the world our members
make well over $250 million of logwork
each year. Please contact the office
at 1-800-532-2900 for an advertising
specification sheet and ad rates.
Log Building Newsnow in
Full ColorDownload the
current issue at the
ILBA website:
www.logassociation.org
get noticed
contact [email protected] 250.545.2341tf 1.800.663.6432
Proud to serve the ILBA
http://www.waysideco.ca/http://www.waysideco.ca/http://www.waysideco.ca/http://www.waysideco.ca/http://www.waysideco.ca/http://www.waysideco.ca/ -
8/10/2019 Log Building News - Issue No. 76
32/32
http://www.logworks.ca/logworks.php?cat=other_products&id=42