lock bodies

LOCK BODIES

VON MORRIS is a brand of ERIC MORRIS & COMPANY

Phone: 856-997-0222 • Fax: 856-294-5116 • Web: vonmorr is.com

LOCK BODIES

974--/--975--/--976--/--977--/--

Accurate Entry Mortise Lock 2.5" BS/1.75" DT Accurate Entry Mortise Lock 2.75" BS/1.75" DT Accurate Entry Mortise Lock 2.5" BS/2.25" DT Accurate Entry Mortise Lock 2.75" BS/2.25" DT

Standard Entry Mortise Lock

448.00448.00448.00448.00

All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Customer Service for Up to Date Pricing.

Rev. 5/20

T2

Features:Latch bolt by key outside and lever either side unless outside lever is locked by toggle action stop. Dead bolt by key outside and turn piece inside. Turning inside lever retracts latch and dead bolt simultaneously.

Outside lever remains locked until manually unlocked by toggleCase: Heavy Gauge. Plated Steel.Front: 1.25" x 8.00" Latch Bolt: Anti friction latch bolt with 3/4" throw.Dead Bolt: Brass-with hardend steel inserts, 1” throwStrike: 4 7/8” ASAThumb Turn Hub: 3/16” (5mm) on the diamondBackset: 2.50" or 2.75”

Func�on/Handing LH= Le� HandGL=Grip x Lever RH= Right HandGK=Grip x Knob LHR= Le� Hnd ReverseKK=Knob x Knob RHR= Right Hand ReverseLL= Lever

Item number is three digit number followed by two le�er func�on code/two le�er handing code-

finish code. ex: 974GL/RH-FIN

Von Morris provides Heavy Duty Mortise Entry Locks with Emergency Egress function with all of our Grip Handlesets and Entry Sets. They are supplied standard as 2.5” backset. Other functions and backsets are available, including “upside down” and Electrified. Please contact customer service for more information.



LOCK BODIESEntry Mortise Lock

Entry Mortise Lock

• Three hour UL Listed, Heavy Gauge, Plated Steel

• Case is Stainless Steel for superior corrosion resistance

• Anti-friction latch and security deadbolt with hardened steel inserts

• For use with levers, knobs, and thumb grip handles

• Grade 1 certified to ANSI/BHMA - exceeding 5 million cycles at independent third party test facility

• MARINE GRADE offered (limited functions)

Rev. 5/20

T3

6.06

3”

3.34

8”1.

875”

1.18

8”

1.125” 2.750”

0.219”

1.250”

7.25

0”

8.00

0”

1.50

0” -

1.68

8”

LOCK BODIES

9434K9438K9434L9438L

Passage Tubular Latch 2-3/4” Passage Knob StrengthPassage Tubular Latch 2-3/8” Passage Knob StrengthPassage Tubular Latch 2-3/4” Passage Lever StrengthPassage Tubular Latch 2-3/8” Passage Lever Strength

Standard Distressed ETERNAPassage Tubular Latch

Standard Distressed ETERNAPrivacy/Locking Tubular Latch

9334K9338K9334L9338L

Privacy Tubular Latch 2-3/4” Passage Knob StrengthPrivacy Tubular Latch 2-3/8” Passage Knob StrengthPrivacy Tubular Latch 2-3/4” Passage Lever StrengthPrivacy Tubular Latch 2-3/8” Passage Lever Strength

• 22° Retraction.• Tested to more than 1 million cycles.• Available in 2.75" and 2.375" backset.

Features: Latch case of dichromated steel. Latch front and faceplate permanently assembled and easily interchangeable to facilitate stocking. Adjustable for use on beveled doors. Latch bolt and front/face plate spin 360° for easy handing. Knob latches are two way rotation. Lever latches are one way rotation and feature heavy duty springs. Privacy latches supplied with a swivel spindle for use on a 1.375" door.

Strike: Latches supplied with a standard box strike. Other strikes available upon request. All strikes supplied with a solid brass dust box.

Packing: Latches packed one per box with appropriate fasteners, strike, front/face plate and dust box. Privacy latches supplied with a swivel spindle for 1.375" doors. Other sizespindles available at an additional charge.

Privacy Pin: Privacy latches packed with a finished privacy pin.

54.8854.8854.8854.88

64.9664.9664.9664.96

78.4078.4078.4078.40

73.9273.9273.9273.92

82.8882.8882.8882.88

78.4078.4078.4078.40


Standard Distressed ETERNATube Latch Strike and Dust Box

93404

93405-009

Tube Latch Strike

Dust Box for Tube Latch and Mortise Bolt

8.50

2.46

9.98 11.09Mill Finish

Rev. 5/20

T4VON MORRIS is a brand of ERIC MORRIS & COMPANY


LOCK Passage Tubular Latches

9434 Passage Tubular Latch 2-3/4” Backset9438 Passage Tubular Latch 2-3/8” Backset

9334 Passage Tubular Latch 2-3/4” Backset9338 Passage Tubular Latch 2-3/8” Backset

Passage

Privacy/Locking

2.375 Backset

2.75 Backset

Privacy/Locking Tubular Latches

Dust Box Tube Latch Strike

Dust Box Tube Latch Strike

Rev. 5/20

T5

0.82

7”

3.350”

2.375”

0.500”

0.80

0”

0.82

7”

3.725”

2.750”

0.500”

0.80

0”



LOCK BODIES

9538 Mortise Bolt 2-3/8”Standard Distressed ETERNA

Mortise Bolt

Features: Exceptional quality heavy duty mortise bolt, constructed with a Stainless Steel housing and Forged Brass components. Smooth and positive action. Designed for use with Tubular Passage Latches forprivacy/patio function. Mortise bolts may be installed above or below latches, depending upon desired appearance. Turnpiece and Emergency Release trim available at an additional charge.

Strike: Mortise Bolts supplied standard with a mortise strike. Optional Combination Strike or Extended Lip Combination Strike available at extra charge. All strikes supplied with a solid brass dust box.

Packing: Mortise Bolts packed one per box with appropriate fasteners, strike, front/face plate and solid brass dust box.

47.04 54.88 67.20


94401 Optional Combination StrikeStandard Distressed ETERNA

Optional Combination Strike

20.16 26.88 34.72

94402 Optional Extended Combination StikeStandard Distressed ETERNA

Optional Extended Combination Stike

25.20 30.24 39.20

Rev. 5/20



LOCK Mortise Bolt

9538 Mortise Bolt 2-3/8” Backset

Standard Strike 94401 OptionalCombination Stike

94402 Optional ExtendedCombination Stike

Rev. 5/20

T7

3.285”

2.375”

0.63

5”

0.82

5”



LOCK BODIES

91009101

Interior Mortise Lock, Privacy, without function KitInterior Mortise Lock, Passage

Standard Distressed ETERNAInterior Mortise Lock

Features: Heavy duty steel case with smooth exterior for ease of installation. Case is zinc dichromated for corrosion resistance. Interior mechanism is a combination of heavy zinc dichromated steel, forged brass and Stainless Steel components. Armored front protects against tampering with cylinder tension screws and hub tension adjusting screws. Latch is extremely versatile. Springing is infinitely adjustable for any size knob orlever. Two way hub rotation allows lock to be installed with the turn piece either above or below the knob or lever. Hub position adjustment allows proper positioning of lever. Hub Position is adjusted from side of the lock case allowing the hub position to be adjusted so that levers are horizontal and oval knobs are straight. It allows adjustment of up to 5 degrees in either direction. One latch case allows many locking functions: turnpiece, cylinder or bit key. Latch bolt is easily reversible without opening the case. The minimum recom-mended door thickness is 1-3/8".

Case Size: 0.563" x 3.25" x 4.50"

Front: Heavy Duty steel with zinc dichromate finish. 1" x 5.75" front is large enough to install in retrofit appli-cations without the use of fillers. Heavy wrought brass armored front covers latch installation screws, cylin-der tension screw, hub tension screw and is available in finishes to match trim.

Latch Bolt: Brass latch bolt, 0.50" x 0.625" with a 0.50" throw. Latch bolt is field reversible by simply rotat-ing the bolt. Bolt is held in position by the armored front.

Deadbolt: 0.36" x 0.86" with a 0.50" throw.

Hub: Star broach (7mm diamond/8mm square) with two way rotation, 25 degree release. Hub tension is infinitely adjustable with a screw in the latch front. Adjustable hub angle.

Backset: 2.50"

Spacing: 2.25" spindle hub to turnpiece or bit key; 2.467" spindle to cylinder.

Strike: Wrought Brass straight lip strike finished to match. All latches furnished with a solid brass dust box.

225.12194.88

235.20207.20

252.00229.60


Rev. 5/20



LOCK Interior Mortise Latch/Passage

1.000" 3.250"

2.500"

1.000" 3.250"

2.500"

Interior Mortise Lock/Passage

9101 Mortise Latch

9100 Mortise Lock

Rev. 5/20

T9

5.75

0”

4.50

0”

5.75

0”

4.50

0”

2.25

0”



LOCK BODIES

Features: The new Stainless Steel lock: - Increased spring strength for knob/lever hub preventing lever sagging - Separation of springing for knob/lever hub and latch bolt allows for softer spring strength in latch bolt for easier latch retraction when door closes - Handing is now easy! Simply remove the face plate, and rotate the latch. Its that easy! - Reduced hub rotation, now only 28º for full latch refraction, compared to 45º for existing Brass and Iron cases

Operation: Latch Bolt by Knob outside and Lever inside. Deadbolt by Oval Turnpiece inside.

Case Size: 2.0" x 2.1" x 0.5"

Hub: 7mm square with two way rotation.

Backset: 1.50"

Spacing: Knob hub to Turnpiece hub, 1.0".

Latch Bolt: 0.50" x 0.30" forged brass furnished in machined brass finish. 0.313" throw.

Deadbolt: 0.30" round extruded brass furnished in machined brass finish. 0.313" throw.

Strike: Straight Lip Strike furnished in finish matching trim. Extended lip strikes available.

9001

9001-009

Stainless Steel Screen Door Latch

Stainless Steel Screen Door Latch (No Faceplate or Strike)

Standard Distressed ETERNA94.06 95.30 99.47

Mill75.50

Screen Door Latches

Rev. 5/20



LOCK Stainless Steel Screen Door Latch

1.500"

2.100" 0.688"

9001 Stainless Steel Mortise Latch

Rev. 5/20

T11

The new Stainless Steel lock: - Increased spring strength for knob/lever hub preventing lever sagging - Separation of springing for knob/lever hub and latch bolt allows for softer spring strength in latch bolt for easier latch retraction when door closes - Handing is now easy! Simply remove the face plate, and rotate the latch. Its that easy! - Reduced hub rotation, now only 28º for full latch refraction, compared to 45º for existing Brass and Iron cases

1.00

0”

2.00

0”

3.25

0”



LOCK BODIES

9200 Active Pocket Door Lock with Dustproof strikeStandard Distressed ETERNA

Active Pocket Door Lock with Edge Pull

Features: This Pocket Door Lock (9200) has been engineered for durability, ease of installation and versa-tility. The lock body is constructed from heavy duty steel with a zinc dichromate finish. It has the smallest possible case and smooth sides to ease installation. The lock body has several function kits available to convert the lock from Turnpiece to Mortise Cylinder or Bit Key operation. Lock body has built in edge pull.Also available as dummy lock (9201) with built in edge pull to be used on pairs of doors. The 9200 hook bolt will latch into the 9201 body. The 9201 dummy lock has a dustproof strike with spring loaded cover for latch hole and built in edge pull. It replaces the dustproof strike (92004) in double door applications and provides a clean, neat installation. The minimum door thickness is 1-3/8” and the maximum door thickness is 3”.

Application: For single door applications where a latching feature is desired use 9200 lock. For double meeting doors where a latching feature is desired use the 9200 and 9201. For single and double door appli-cations where a latching feature is not desired use the 9202 mortise edge pull. See next page.

Case Size: 9200: 3.52" x 5.77" x 0.563" 9201: 2.77" x 5.77" x 0.563"

Front: Heavy steel with zinc dichromate finish. 8.00" x 0.875" front is sized to allow use in double door installations with the use of standard mouldings. Heavy wrought brass armored front finished to match trim. Front covers latch installation screws and cylinder tension screw.

Hook Bolt: Brass Hook Bolt is finished in either 605 or 619 finish.

Edge Pull: Brass Edge Pull is released with a push on the retracted hook bolt on 9200 lock. Use center button on 9201.

9201 Dummy Pocket Door Lock with built in Dustproof strike Standard Distressed ETERNA

Dummy Pocket Door Lock with Edge Pull

92004 Dustproof Strike

154.56 161.28 184.80

126.56 143.36 151.20

92004 Dustproof strike Standard Distressed ETERNA

Dustproof Strike

17.08 19.92 20.64

All Prices in US Dollars - Prices Subject to Change Without NoticePlease Check with Von Morris Customer Service for Up to Date Pricing.

Rev. 5/20

T12

Backset: 9200: 2.50", 9201: none



LOCK Pocket Door Lock - Active

Pocket Door Lock - Dummy with Edge Pull

9200 Active Lock wtih Edge Pull

9201 Dummy with Edge Pull

92004 Dustproof Strike

The 9200 Active lock body has several func-tion kits available to convert the lock from Turnpiece to Mortise Cylinder or Bit Key oper-ation. Lock body has built in edge pull.

The 9201 Dummy with built in edge pull is designed to be used on pairs of doors. The 9200 hook bolt will latch into the 9201 body. The 9201 dummy lock has a dustproof strike with spring loaded cover for latch hole and built in edge pull. It replaces the dustproof strike (92004) in double door applications and provides a clean, neat installation.

Rev. 5/20

T13

0.094”

5.77

5”

8.00

0”

3.520”

5.77

5”

8.00

0”

2.770”

0.094”



LOCK BODIES

9202 Edge PullStandard Distressed ETERNA

Pocket Door Lock - Edge Pull

Features: The 9202 Edge Pull is designed for use on pocket doors when no locking or latching is required. Case and front sizes are reduced for ease of installation. Case sides are smooth with no projec-tions for

easy mortising. Can be used with our Recessed Flush Pulls for single and double door applications. The minimum door thickness is 1-3/8".

Application: For single door applications where a latching feature is desired use 9200 lock. For double meeting doors where a latching feature is desired use the 9200 and 9100. For single and double door

applications where a latching feature is not desired use the 9202 mortise edge pull.

Case Size: 2.77" x 3.75" x 0.563"

Front: Heavy steel with zinc dichromate finish, 6.0" x 0.875". Heavy wrought brass armored front finished to match trim.

Edge Pull: Brass edge pull is released with a push on the center button. Edge pull and center button supplied standard in 606 or 619 finish.

95.20 104.16 117.60


Rev. 5/20



LOCK Pocket Door Locks - Edge Pull

9202 Edge Pull

0.0938"

3.75

"

6.00

"

2.77"

• The 9202 Edge Pull is designed for use on pocket doors when no locking or latching is required.

Rev. 5/20



LOCK BODIES

Rev. 5/20 VON MORRIS is a brand of ERIC MORRIS & COMPANY


lock bodies

Documents