lmg600 series introduction - zes...
TRANSCRIPT
-
Copyright 2014 ZES ZIMMER Electronic Systems GmbH
LMG600 Series Introduction
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Precision in Power
is the guideline of ZES ZIMMER Electronic Systems GmbH.
ZES ZIMMER is a German high-tech company specialized in developing, manufacturing and
distribution of precision instruments and systems for measuring electrical power, energy,
harmonics, flicker and power quality.
The company is based in Oberursel, Germany, and was founded in 1980 by
Dipl.-Ing. Georg Zimmer. It is one of the technical leaders in the field of power analysis
worldwide.
ZES ZIMMER offers professional service and support to help customers optimize their
applications.
ZES ZIMMER The Touchstone in Power Analysis
2
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
A New Family of Power Analyzers
3
LMG600
Multi-phase Precision Power Analyzers
Up to 1000V direct in 10 ranges
Up to 32A direct in 14 ranges
DC to 10Mhz
Innovative DualPath architecture
Sampling rate 1.2MS/s
Active power accuracy 0.015% rdg + 0.01% rng
One power channel can be substituted with
one process-signal-interface
Modular 1 - 4 power channels /
Single channel
modular 3 - 7 power channels
LMG640 /LMG610
LMG670
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
4
Precision power analyzer
Measure
View
Store and Share
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
5
Precision power analyzer
Measure
Capabilities
Setup (configuration)
Extend (CTs and PTs)
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
6
Precision power analyzer
Measure
Capabilities
Channels
Filters
DualPath
Setup (configuration)
Extend (CTs, PTs and PSI)
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
A/B/C-Channels 3 Types for Every Application
7
Power analyzers are available in different accuracy classes, to allow the user to choose
the right tool for the job at hand. After all, not all applications require maximum precision;
often lower resolution and frequency range are sufficient. This is why the LMG600 series
offers three different channel types, which can be combined in the same chassis without
problems to ensure that you always have a measuring device tailored to your needs.
Bandwidth
Accuracy
10 kHz 500 kHz 10 MHz
0.025
0.04
0.11
High-precision measurements at high bandwidth
Cost-effective broadband measurements
Precise measurements on 50Hz applications
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Power measurement channels
8
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Channels Right Type for Every Application. Save Money
9
Example: Electric Drive System
DC
ACM
AC
DC2-4
1) 2) 3)
C-channel A/B-channel A/B-channel
1) Input of the converter: C1-channels are usually sufficient for this.
2) DC intermediate circuit: depending on the required level of precision, A1 or B1-channels
are required, as the DC intermediate circuit exhibits significant residual ripple under
certain circumstances.
3) Converter output: depending on the required level of precision, A1 or B1-channels only
are to be used.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Filters. Accuracy without compromise
10
In this menu the
filters and wirings
can be set.
For several signals, it is
necessary to fit filters
or change the signal
coupling/wiring to get
the right values. You
can adjust this settings
separately for each
group.
You can select Single
Path or Dual Path signal
processing
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
DualPath Twice the Results, Half the Time
11
Scope display of the voltages at the
converter output.
The wideband values ( ) show the
PWM signal.
The narrowband values ( ) are
sinusoidal.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
DualPath Twice the Results, Half the Time
12
Simultaneous measurement in two bandwidths
DualPath - No compromises, No doubt
The LMG670 was the first power analyzer to have two A/D converters in two independent signal paths for each current and voltage channel. One for the filterless measurement of the wideband
signal, and a second for the narrowband signal at the output of the anti-aliasing filter. The
parallel processing of the digitized sample values gives the user access to both measurements
of the same signal, without risking aliasing effects.
This unique procedure has established itself for the complete LMG600 series.
It avoids all of the downsides of previous approaches and guarantees the most precise result in
the shortest time possible. The LMG600 series power analyzers get all necessary values in one shot.
Fast. Reliable. No hassle. No compromises. No redundant work.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
13
Precision power analyzer
Measure
Capabilities
Setup (configuration)
Groups
Sync
Wiring
Extend (CTs and PTs)
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Group menu
14
In this menu the
filters and wirings
can be set.
For several signals, it is
necessary to fit filters
or change the signal
coupling/wiring to get
the right values. You
can adjust this settings
separately for each
group.
You can select Single
Path or Dual Path signal
processing
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Channel menu
15
Set up the
measuring
ranges.
Select voltage and/or
current input (direct or
sensor input) and set
up the ranges manually
or automatically.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Measuring: 14 Current Ranges, 5 internal shunts
16
Direct Input
5 mA 10 mA 20 mA
40 mA 80 mA 150 mA
300 mA 600 mA 1.2 A
2.5 A 5 A 10 A
20 A 32 A
Normal Current Measuring Ranges
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
17
Precision power analyzer
Measure
Capabilities
Setup (configuration)
Extend
CTs
PTs
Other Signal I/F
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Sensors: Wideband PT, Precision Current Transducers
18
Precision high voltage divider HST for
3/6/9/12/30kV up to 300kHz, 0.05%.
Negligible phase error, therefore best suited
for wideband power measuring.
Precise current transducersPrec. AC current
transformer
Clamp-on
current sensor
Prec. wideband
current transformer
Hall effect
current sensors
Up to 20kV and 10kA DC/AC rms with best accuracy.Plug-and-Measure easy pre-configuration.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Rear side interfaces: PSI
19
Process-signal-interface:
*occupies 1 slot otherwise
available for 1 power
measurement channel
8 digital inputs,
8 digital outputs,
2 fast analog inputs (150 kS/s, 15 kHz bandwidth),
8 slow analog inputs (DC),
32 analog outputs,
2 frequency inputs (frequency, orientation, position; TTL, HTL or differential)
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Application: Motor & Drive Total System Efficiency
20
Components of the power measurement application with LMG670
BrakeMotor
Torque and speed
sensory
1- or 3-phase
source
Frequency inverter
Power analyzer
LMG670
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
21
Precision power analyzer
Measure
View
Stock Screens
Custom Screens
LMG Remote
Store and Share
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Default Screens
22
In this screen all
important values
of the measured
system can be
read.
Use the touch screen or
soft keys to select few
or many values as well
as the channel/s.
Furthermore you can
choose between
measure values and
harmonic analysis via
soft key Display
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Voltage and Current Screen
23
In the Current and Voltage screen
all important values of the current
or voltage measurements can be
read.
You can also select between Normal and
Harmonic display.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Power Screen
24
In the Power
screen all
important values
of the power
measurements
can be read.
You can also select
between Normal and
Harmonic display as
well as many values
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Energy Screen
25
In the Energy
screen all
important values
of the energy
measurements
can be read.
Start, Stop and/or
Reset your energy
measurement. All
channels can be started
and stopped
independently from
each other.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Graph screens: Plot, Scope, Harmonics, Vector
26
Up to 8 tracks can
be graphically
represented in
one scope.
In DualPath mode you
can track narrow- and
wideband signals
simultaneously.
Cursors can be used to
obtain values at and
between cursors.
In Plot tab you can plot
measuring values.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
27
Precision power analyzer
Measure
View
Stock Screens
Custom Screens
LMG Remote
Store and Share
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
28
Enter CUSTOM menu
Pre-defined views for introduction and
measuring examples. Use the first two views
Introduction 1/2 and Introduction 2/2 to
get a first impression.
There are two basic editors:
Tap short to enter the content editor: show
the grid, create boxes and add content
Tap long to enter the layout editor: modify the
layout, move/remove and/or resize boxes
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
29
Enter View 6
Use the empty view to
customize your own
menu.
First you will see soft
keys to clear/load/save
menus and/or to set
the grid/background
Now we want to build a custom menu step by step to display the power and efficiency of
a variable frequency drive.
First, enter the settings as marked to set the grid dimensions.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
30
Settings
Set the grid dimensions
as required. This can be
specified by the
required solution for
the layout or the
required number of
parameters etc.
Enter 12 rows and 24 columns. You will see the grid dimension in the preview.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
31
Rename
Give your own menu a
name by pressing the
soft key Rename.
Enter a name for your custom menu.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
32
Set the title
Enter the content editor to see the grid. Tap
longer on the marked box to enter the layout
editor. The box will be framed in red.
Tap and hold one corner of the red framed box
to resize it. Resize it as shown in the left lower
screenshot.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
33
Set the title for the menu
Leave the layout editor and to re-enter the
content editor. Mark the resized box and press
the soft key Add Text as marked in the
screenshot.
*A text in the custom menu can consist of standard html-notations.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Customize a Screen
34
Complete the
custom menu
Add all the remaining
graphs and subtitles as
shown in the
screenshot to your
custom menu.
To add graphs repeat the procedure as for adding measurands but select Add Graph
instead in the content menu. In the content editor the scope source can be selected as
well. The signals shown in the graphs need to be set in the GRAPH menu first.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
35
Precision power analyzer
Measure
View
Stock Screens
Custom Screens
LMG Remote
Store and Share
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG Remote
36
Benefits
Control the LMG670 remotely from a Windows PC
LMG Remote mimics the power analyzer itself down to the last detail
Familiar operation of the measuring device from the PC
Real-time display of all device functions
Measuring device LMG670 Software on Windows PC
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG Remote
37
Instead of storing the measurement data (.zlr-file, .csv-file) on the device integrated HDD, LMG
Remote allows the customer to store the files directly on the HDD of your Windows PC.
Storage menu
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG Remote
38
Interface settings
on LMG670
Easy setup of the
interface settings
Set address masks as
given from your
administrator or select
"DHCP on
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG Remote
39
Connection with
LMG Remote
Just type the IP-address
of the measuring
device and press Enter.
Afterwards, you can
start with your remote
configuration and
measurement.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
40
Precision power analyzer
Measure
View
Store and Share
Logging
Networks
Script Editor
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Create ZLR-file
41
Enter the Storage-menu and click enter File in the Log-card
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Create ZLR-file
42
Select the storage location for the .zlr-file. Name the file and press Enter to get back to the
Storage menu.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Create ZLR-file
43
Press Configure Values to select the single measurement values you want to store. You can
also select the range in list-values like harmonics e.g. Press enter to get back in the menu.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Create ZLR-file
44
Press Create to start/stop continuous storage (one row per cycle) or press Once for single
shots.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Export CSV-file
45
Press Export to enter the Export menu. You can add some or all stored values for export.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Export CSV-file
46
You can split the output file by file size or by the number of rows in each file etc.
Press Enter for selecting the storage location.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Data Storage - Export CSV-file
47
Name the .csv-file and press Enter. Now you have exported your stored measurement data.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
48
Precision power analyzer
Store and Share
Logging
Networks
Gbit Ethernet
USB storage
Serial RS232
CAN
Script Editor
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
49
Precision power analyzer
Measure
View
Store and Share
Logging
Networks
Script Editor
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Script Editor
50
Powerful
programming
script
environment for
application
computing on
board.
Full access to system information
Create variables and equations for I/O control, Pass/Fail, reporting etc.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 overview
51
Precision power analyzer
Measure
View
Store and Share
Harmonic and Flicker Compliance Testing
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 with LMG Test Suite
52
AC source grid impedance
NI2415-3
power analyzer LMG670 device
under test
EUT
G~
G~
G~
A
A
A
V VV
Measurement assembly according to EN61000-3 with LMG670
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 with LMG Test Suite
53
CE-Compliance
The use of power electronics devices causes power or rather current depending noise on the grid or your network, which reduces the quality of your grid voltage or interferes other
connected devices.
Therefore, electrical installations, systems and
equipment must comply with the EU directives and
regulations, when they are placed on the market
within the EU.
Other guidelines for electromagnetic compatibilityand eco-design of energy-using products must be
observed and fulfilled as well.
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 with LMG Test Suite
54
LMG Test Suite
Only 4 steps for complete
compliance test including result
Setup
File
Test
Report
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Series Key Features
55
With Interharmonics up to 400th order according EN61000-4-7
Torque/speed inputs fast & synchronous to rms power values
Customize your own menu according your demands
Convenient calculation of all derived variables
Freely configurable in frequency, type and characteristics
Adding sensors fast & conveniently while avoiding mistakes
Up to 4 respectively 7 frequencies concurrently
Harmonics
Process Signals
Custom menu
Script Editor
Flexible Filters
PlugnMeasure
Synchronization
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
LMG600 Series Key Features
56
Interactions between grid and consumers acc. to EN61000-4-15
Hi-res sample values via interface
Large 1024x600 display; rapid access to all important menu items
Real-time display of all device functions via remote operation
Internal storage even of long-term measurements
Connectivity with GBit-Ethernet, USB2.0, RS-232 and DVI/VGA
Flicker
Sample Values
Touchscreen
Remote Control
Memory
Interfaces
-
Copyright 2014
ZES ZIMMER Electronic Systems GmbH
Thank you for your attention!
Questions?
57
Robert EmersonZES ZIMMER Inc.
Sales and Application+1 760-550-9371
www.zes.com