little david™ case sealing demo equipment · little david™ case sealing demo equipment. thank...
TRANSCRIPT
Crating Instructions
Little David™ Case SealingLittle David™ Case Sealing
Demo Equipment
Thank you for your continued support of
Little David™ Products.We truly appreciate the opportunity to provide product demonstration.
Upon receiving the equipment, please be sure to retain all crating material in the event
the equipment is not purchased. This will help to ensure the integrity of the equipment,
and prevent costly damages in transit.
Using a hand truck or fork lift, as to
not scratch the machine:
• Lift machine from mast side
Crating Instructions
• Lift machine from mast side
• Move machine to skid
Crating Instructions
• Line up machine on skid, as shown, so that no edge of machine hangs over edge of skid
• Line up edge of frame leg with inner edge of first board
Crating Instructions
• Reuse the 5/16x1-1/2 wood
thread hex lag bolt supplied
with the machine.
• Reuse four pieces of pallet
clampclamp
Crating Instructions
• Pallet clamp notch fits into
bottom of leg extension on
the machine
• Use pneumatic impact gun • Use pneumatic impact gun
or hand tool with 13mm
impact socket to bolt
through pallet clamp into
the skid
Crating Instructions• Once machine has been secured to the skid, reuse shipping
box by placing over the equipment, or reattach wooden sides
to skid as shown below.
Crating Instructions
• Finish crating by securing
two straps around the skid
and box.
• If the equipment has
wooden sides, use one strap
as shown.as shown.
• Place ship to label on box, or
directly on machine, as
shown with wooden sided
crates.