SERIES

LightSmart-PE150

PDH Mullti-service Optical Transmission

LightSmart-PE150 is the PDH multi-service intelligent management fiber transmission equipment,

which is designed with the increases of customers’ demands and the requirements of the high

reliability. It provides up to 16*E1 channels, 4*10/100 Based-T Ethernet, 16*data channels (V.35, RS-

530, X.21) or mixed configurations, supports optical interfaces 11 backup and ALS (Automatic Laser

Shutdown/Reduction) functions, realizes Media Converter, traditional PDH, RS232 Fiber Modem access

in a single network platform. Supporting network management system based on local LCD/menu keys

and PC platform, full management functions reduce the time and cost of the network maintenance.

Special Feature for Product

Offer 16*E1 (2.048 Mbps) interfaces,

two styles unbalanced interface

(BNC) and balanced interface (RJ-

45)

Specifications

E1 interface

Data rate: 2.048Mbps

Tolerance: ±50ppm

Line code: HDB3

Support 4*Ethernet interface Transmission capacity: 16*E1

100Mbps, Full/Half duplex auto-

negotiation and auto MDI/ MDIX,

and support the transmission of IEEE

802.1Q VLAN frame and maximum

1536 Byte VLAN frame

Support 16*data channels, V.35/RS-

530/X.21, n*64kbps, co-directional/

contra-directional modes

An official phone interface is

provided, not occupy E1 channel

Impedance: 75Ω unbalanced/ 120Ω balanced

Electric characteristic: comply with ITU-T G.703 standard

Jitter characteristic: comply with ITU-T G.823 standard

Jitter tolerance: comply with ITU-T G.823 standard

Optical interface

Dual optical interfaces, 1+1 backup and ALS function.

System Gain: 19~30dB

Connector: FC (standard)/SC (optional)/ST (optional)

Type: dual-fiber (standard)/single-fiber (optional)

Wavelength :1310nm/1550nm/1550nm WDM.

1+1 Hot-swappable optical Ethernet interfaces

protection with ALS function

Enhanced LCD display with menu

keys buttons and LEDs for

managements and monitoring

Built-in relay for alarm out, ideal for

external circuit connection and alarm

system building

Support two power supplies backup

Standard: comply with IEEE 802.3, 802.1Q

Data rate: 100 Mbps

Interface rate: 10/100 Mbps auto-negotiation

Transmission capacity: 4*10/100 Based-T

Link mode: MDI-MDIX autosense

Max frame length: 1536 Byte

Connector: RJ-45

Data interfaces

Card typeV.35, RS-530, X.21

Highly integrated hardware circuit, Data rate , n=1~32

power consumption is less than 10W co-directional/contra-directional operation modes Loop-backlocal loop back, remote loop back

LightSmart-PE150

PDH Mullti-service Optical Transmission

Power supply

Specifications (continued) Environment

Voltage: AC220V/AC110V/ DC48V/DC24V

Dual power supply (optical)

Power consumption: <10W

Weight: 3.0Kg

Typical Application

Ordering Information

Operating temperature:30~50

Storage temperature:40~70

Relative humidity: 0%~95%, non-condensing.

Size: 44.5 mm(H) x 485mm(W) x 220mm(D)

LightSmart-PE150-X1X2X3X4X5X6*n X1Optical Link Type

1F Single Optical Link

2F Dual Optical Link (1+1 auto protection)

X2Laser Module Type

MM 1310 nm MLM laser module, 20 km

S3 1310 nm SLM laser module, 30 km S5 1310 nm SLM laser module, 50 km

S7 1310 nm SLM laser module, 70 km

LA 1550 nm SLM laser module, 100 km

X4Power Module Type

A1 Single AC power module

A2 Dual AC power module

D1 Single DC power module

D2 Dual DC power module

AD One AC and one DC power module

X5E1 Interface Type

BW 120 Ohm Balance, wire wrap adapter

BJ 120 Ohm Balance, RJ-45 adapter cable

WD 1550 nm SLM laser module, WDM ready UB 75 Ohm Unbalance, BNC adapter cable

X3Laser Module Connector Type

FC FC/PC type laser module connector

SC SC type laser module connector

ST ST type laser module connector

X6*nPlugg-in Unit (n=number of unit)

E1U 4*E1 unit

EthU 1*10/100 Based-T Ethernet unit

V35 4*V35/RS-530/X.21 Data unit

Copyright © 2001-2006