lemonaid...draw markings on the right side of the box - 4 cm from the front... · 1 empty lemonaid...
TRANSCRIPT
![Page 1: LEMONAID...Draw markings on the right side of the box - 4 cm from the front... · 1 empty Lemonaid crate · Hole saw (50 mm) · Jig saw · Sandpaper · Wooden board (see our “DIY](https://reader033.vdocuments.us/reader033/viewer/2022042023/5e7b24652305c84b1e6cf1f5/html5/thumbnails/1.jpg)
LEMONAIDUPCYCLING - DIYBIKE RACKDURATION: 40 MIN · DEGREE OF DIFFICULTY: MEDIUM
1. Take the empty Lemonaid box first.
4. ... and 7 cm from the top..
8. Now draw saw lines on the upper and lower sides of the holes,...
3. Draw markings on the right side of the box - 4 cm from the front...
· 1 empty Lemonaid crate· Hole saw (50 mm)· Jig saw
· Sandpaper· Wooden board (see our “DIY Stool” tutorial)
7. ... and the right side.
5. Do the same on the left side of the box. 6. Drill a 50 mm wide hole with the hole saw at the intersection of the markings on the left side...
Equipment:
2. Draw a horizontal saw line on the front above and below the handle hole.
More Information:lemon-aid.de/diy
![Page 2: LEMONAID...Draw markings on the right side of the box - 4 cm from the front... · 1 empty Lemonaid crate · Hole saw (50 mm) · Jig saw · Sandpaper · Wooden board (see our “DIY](https://reader033.vdocuments.us/reader033/viewer/2022042023/5e7b24652305c84b1e6cf1f5/html5/thumbnails/2.jpg)
10. Saw along the resulting continuous lines from one side of the crate to the other.
13. Now just fix the rack to the wall with screws, hang up the bike - that’s it!
9. ... which connect to the respective lines on the front.
11. Sandpaper the edges. 12. Put the wooden plate (see our “DIY Stool” tutori-al) on the crate.