leea programme of training courses at huntingdonb... · web viewleea academy training course...

LEEA ACADEMYTRAINING COURSE PROSPECTUS

July – December 2019

Document reference LEEA 036(b) Version 2 dated 10th April 2019

Lifting Standards Worldwide

Methods of Learning Available

LEEA Dubai Training Centre

LEEA Huntingdon Training Centre

Instructor-led Training (ILT)

Blended Learning

E-learning via the LEEA Academy

UK (On-site)

International (On-site)

LEEA Foundation Course

(Mandatory)

LEEA Advanced Programmes

Offshore Container

Examination

Overhead Travelling Cranes

Runways and Crane Structures

Lifting Machines Power

Lifting Machines Manual

Lifting Equipment

General

Mobile Crane Examination

Only available as On-site ILT

For information on all LEEA Training Services please

email [email protected]

omSubject: Training Query

mailto:[email protected]


LEEA Academy

LEEA Training Courses and Team Cards

The LEEA Foundation Course is a pre-requisite training course that must be achieved before progressing to the LEEA Advanced Programmes. The LEEA Foundation Course is NOT a qualification.

The LEEA Advanced Programme is a specialist training course for your chosen subject. The Advanced Programmes can be taken in any order, and employees of our LEEA Full and Development Members are entitled to a TEAM Card in the category of “Test and Examine”, this will list all qualifications achieved.

Bespoke training courses are designed as supplementary training courses that complement the Advanced Programmes. Delegates that successfully complete the training courses will be awarded a LEEA certificate.

Methods of Training

E-Learning is available via our LEEA Academy for all LEEA Courses except for Mobile Crane Examination.

Instructor-Led Training courses can be delivered UK wide or internationally at the members’ premises, or at our purpose-built training centre in LEEA Huntingdon. Courses include the LEEA Foundation Course, bespoke training and Advanced Programmes.

Blended Learning: a course will be studied via the e-learning platform in the LEEA Academy followed by 2-day session including final examination which will be delivered by a LEEA Training Specialist at your chosen location. This option is available to members with multiple delegates wishing to study in advance of the 2-day re-cap and assessment session. Prices are available upon request.

FOU - The LEEA Foundation Course

The course is structured to take place over a 3-day period and includes all equipment in the syllabus scope for the LEEA Advanced Programme courses (the final assessment for the course is on day 3). This foundation course does not offer a LEEA qualification for inspection or examination of lifting equipment but must be completed before a delegate can undertake the Advanced Programme courses.

Course Syllabus: Legislation

Standards & Codes of Practice

Materials

Basic Heat Treatment

Units of Measure

Basic Force, Stress and Strain

Basic Mechanics of Simple Machines

Methods of Manufacture

Verification of Lifting Equipment

Wire Rope & Wire Rope Slings

Chain & Chain Slings

Rating and Marking of Lifting Equipment

Textile Slings - Fibre Rope & Fibre Rope Slings

Textile Webbing Slings

Textile Roundslings

Components for slings

Shackles and eyebolts

Turnbuckles

Manual chain hoists

Lever hoists

Jaw winches

Jacks

Crane forks and C Hooks

Powered Lifting Machines

Runways and Crane Structures

Overhead Travelling Cranes

Offshore Containers

Mobile Cranes

Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your location in the UK and overseas) and blended learning.

LEG - Lifting Equipment General Advanced Programme

The course is structured to take place over a 5-day period where the delegates will benefit from hands-on practical training to complement the essential theory sessions. The Advanced Programme is based on lifting accessories and includes thorough examination procedures and criteria for continued periods of service.

Course Syllabus:

Legislation

Heat Treatment

Stress and Strain

Chain and Chain Slings

Wire Rope and Wire Rope Slings

Verification of Lifting Equipment

Textile Slings – Fibre Rope and Fibre

Rope Slings

Textile Webbing Slings

Textile Roundslings

Components for Slings

Shackles and Eyebolts

Turnbuckles

Plate Clamps

Beam Clamps

Lifting Beams

Lifting Magnets

Vacuum Lifters

Crane Forks and C Hooks


LMM - Lifting Machines Manual Advanced Programme

The course is structured to take place over a 5-day period where the delegates will benefit from hands-on practical training to complement the essential theory sessions. The Advanced Programme is based on manually operated lifting machines and includes thorough examination procedures and criteria for continued periods of service.

Course Syllabus:

Legislation

Mechanics – Simple Machines

Verification of Lifting Equipment (Testing & Examination)

Load Chain for Lifting Machines

Wire Rope for Lifting Machines

Screw Brake Mechanisms

Hand Operated Chain Blocks

Lever Hoists

Jaw Winches

Hand Operated Winches

Travelling Trolleys

Mechanical Jacks

Hydraulic Jacks

Pulley Blocks

Site Examination Procedures


LMP - Lifting Machines Power Advanced Programme

The course is structured to take place over a 5-day period where delegates will benefit from hands-on practical training to complement the essential theory sessions. The Advanced Programme is based on powered lifting machines and includes thorough examination procedures and criteria for continued periods of service.

Course Syllabus:

Legislation

Lifting Media – Chain

Lifting Media – Wire Rope

Load Hooks and Sheave Blocks

Suspension and Trolleys

Electric Wire Rope Hoists

Pneumatic Hoists

Powered Winches

Brakes

Limit Switches – Over travel

Principles of Electrical Machines

Principles of Pneumatic Machines

Power Supply Systems

Electric Chain Hoists

Overloading Protection – WLL

Overloading Protection – Electrical

Safe use of Powered Hoists


RCS - Runways & Crane Structures Advanced Programme

The course is structured to take place over a 5-day period. The Advanced Programme is based on runway beams, jib and mobile gantry cranes and structures, including thorough examination procedures and criteria for continued periods of service.

Course Syllabus:

Legislation Purpose built runways

Standards Cranes and components

Runways Beam clamps

Supporting Structures Mobile lifting gantries

Deflection and measurements Swing jib cranes

Runway beams with cantilevers Davits

Runway beam fixings – Bolted Examination and testing of slewing jib cranes

Welding of structural steel Power feed systems

Inspection and testing of welds Safety essentials – Working on RCS

Site examination and testing


OTC - Overhead Travelling Cranes Advanced Programme

The course is structured to take place over a 5-day period. The Advanced Programme focuses on overhead, portal and semi-portal cranes and includes thorough examination procedures and criteria for continued periods of service.

Course Syllabus:

Legislation

Standards

Lifting Media – Load chain

Lifting Media – Load rope

Materials

Crane construction

Crane configuration

End carriages

Hoist construction

Rope drums and pulleys

Motion limit switches

Overload devices

Braking systems

Electric motors and VFDs

Duty classification

Safety essentials – Working on OTCs

Testing as part of the Thorough Examination

The Thorough Examination

Gantry alignment

Power feed systems


OCE - Offshore Containers Advanced Programme - (Design, Construction, Testing, Examination & Marking)

The course is structured to take place over a 5-day period and will provide theoretical training in relation to the current regulations, standards and the requirements of persons carrying out testing, examination and marking of offshore containers with an overview of design and construction requirements.

Course Syllabus:

Legislation Shackles

Standards and Codes of Practice Lifting Set Design

Terms and definitions Examination of Containers

Design and Construction Examination of Lifting Sets

Pad Eyes Testing of Containers

Marking Requirements and Data Plates Testing of Lifting Sets

Certification Inspection Report Requirements

Chain Slings Pre-Trip Inspections

Steel Wire Rope Slings

Current availability: LEEA Academy, Intensive Programme (Instructor Led Training – LEEA Huntingdon Training Centre, on-site at your location in the UK and overseas) and blended learning

MCE – Mobile Crane Examination Advanced Programme

The course is structured to take place over a 7-day period and will provide theoretical and practical training in relation to the current regulations, standards and the requirements of persons carrying out testing and examination of mobile cranes. Delegates will be required to pass a practical assessment and a theoretical examination at the culmination of the training course. Course Syllabus

Legislation Reasons for Thorough Assessment of Mobile Telescoping CranesStandards & COPs Basic Hydraulic Systems for Mobile Telescoping CranesSite Risk Assessment Thorough Assessment of Mobile Crane Chassis/CarrierReasons for Thorough Assessment Thorough Assessment of Mobile Telescoping Crane Superstructure Types of Thorough Assessment and frequency Testing as part of the Thorough AssessmentTypes of P.P.E. Rated Capacity Indicators (R.C.I.)

Inspection Equipment (for verification) Telescoping BoomsTypes of Test Weights Fly Jibs & Luffing JibsCrane Types Limit Switches & DevicesLoad ChartsCrane Signals

Wire Rope AssessmentHook Blocks.Reporting

Current availability: Instructor Led Training – On-site at your location in the UK and overseas (Contact LEEA for further details)

LEEA Huntingdon Training Centre Timetable (July – December 2019)Code Course Title Course

Length July Aug Sept Oct Nov Dec Price per delegate *(excluding VAT)

FOU LEEA Foundation Course 3 days

9th - 11th 6th - 8th 3rd - 5th 1st - 3rd 3rd - 5th

£870.0015th - 17th 27th - 29th 17th - 19th

22nd - 24th

29th – 31st 19th - 21st 17th - 19th

LEGLifting Equipment General Advanced

Programme5 days 1st - 5th 23rd - 27th 14th - 18th 4th - 8th £1,530.00

LMM Lifting Machines Manual Advanced Programme 5 days 15th - 19th 5th - 9th 28th Oct - 1st

Nov £1,530.00

LMP Lifting Machines Power Advanced Programme 5 days 14th - 18th 9th - 13th £1,530.00

RCSRunways and Crane Structures Advanced

Programme5 days 12th - 16th 7th - 11th £1,530.00

OTCOverhead Travelling

Crane Advanced Programme

5 days 9th - 13th 28th Oct - 1st Nov £1,530.00

OCE Offshore Container Advanced Programme 5 days 19th - 23rd £1,530.00

The FOU (Foundation) course is held over three days: Day 1: 9am to 5.00pm, Day 2: 08.30am to 5.00pm and Day 3: 08.30am to 5.00pm.

All other courses will commence at 9.00am and finish at 4.30pm (Monday to Thursday) and 9.00am to 3.00pm at the latest (Friday) dependant on group progress.

Whenever possible we will endeavour to provide training on the preferred dates selected on the booking form. However, places will be allocated on a first come basis. Please therefore indicate any acceptable alternative dates.

Where overnight accommodation is required, members will be responsible for their own arrangements. There is a range of accommodation available within a short drive of the LEEA Training Centre and we will be pleased to provide contact details.

Delegates are strongly advised to book accommodation that may be changed or refunded due to the unlikely event that LEEA has to postpone or cancel a course for operational reasons. LEEA will not be responsible for lost deposits or cancellation charges.

Tea, coffee, water and soft drinks are available throughout the day; lunch is provided on all full training days.

Eligibility for the courses

All delegates must be a minimum age of 18 when attending LEEA Training Courses.

Delegates with learning additional needs, e.g. Dyslexia, should inform our Training Administrator when making a course booking and the Training Specialist at the start of the training course. All such information will be in held in strictest confidence.

The LEEA Foundation Course must be completed successfully prior to any Advanced Programmes.

The Advanced Programme training courses include a mixture of sessions in the classroom and workshop. Workshop sessions will involve handling used equipment. Delegates should therefore be cleanly dressed and bring a suitable overall and safety footwear for the practical sessions. Hand tools will be provided and it will be the responsibility of the delegate to ensure that all tools and equipment are returned to their respective location at the end of the practical sessions.

CreditStandard LEEA credit terms apply. All results, certificates and TEAM Cards (where applicable) will be sent to the company training contact once payment in full has been received for the examination fees. Subject to annual subscription fees having been paid.

CancellationThe following cancellation charges apply:

Cancellation within 7 working days of the commencement of the course = 50% of the course fee.Cancellation within 2 working days of the commencement of the course = 100% of the course fee.

LEEA reserve the right to cancel courses if the number of delegates is insufficient for it to be viable to run a course. LEEA will not be responsible for lost deposits or cancellation charges.

Substitutes If a delegate becomes unavailable before the commencement of the course, a substitute may be nominated. Substitution once the course has commenced is not accepted.

Additional course datesThe training timetable is based on anticipated demand and additional dates can be scheduled if required to suit our Member’s needs. Please contact the LEEA office to discuss this option further.

How to find usHuntingdon is in Cambridgeshire, approximately 60 miles due North of central London. It is easily accessible by major road and rail networks and within a reasonable distance of London’s international airports.

Hinchingbrooke Business Park is located at Spittals Interchange where the A14 turns west before crossing the A1. A Marriott Hotel is clearly visible on the South West corner of the junction.

By rail

The nearest station is at Huntingdon and is on the main line North from London’s Kings Cross terminus. Taxis are available at the station.

By road

From all directions, take the A14 West from the interchange roundabout keeping to the left-hand lane and IMMEDIATELY on leaving the roundabout, there is a slip road to the Marriott Hotel and Business Park. Follow the road past the Hotel, the security barrier and round to the right past the food factory. Osprey Court and the LEEA Training Centre is on the left.

LIFTING EQUIPMENT ENGINEERS ASSOCIATION - TRAINING COURSES BOOKING FORM Jan – June 2019

Student/Registration Number (if known):

TraineeSurname/Family Name:

First Name(s):

Date of Birth (dd/mm/yyyy): / / (Must be provided)

Company

Name (and branch if applicable):

Address:

Training Contact:

Contact phone number:

Contact email address:

Purchase Order number (PO):

Learning difficulties: Does your delegate have additional learning needs, e.g. Dyslexia, if yes, please tick the box and provide details when submitting the form, this information will be held in strictest confidence:

Check the box(s) for the course(s) you would like to attend

Title Course Name Place Required

FOU LEEA Foundation Course

LEG Lifting Equipment General Advanced Programme

LMM Lifting Machines Manual Advanced Programme

LMP Lifting Machines Power Advanced Programme

RCS Runways and Crane Structures Advanced Programme

OTC Overhead Travelling Cranes Advanced Programme

OCE Offshore Containers Examination Advanced Programme

Preferred start date (see above table) / /

Alternative start date / /

PaymentPayment must be made before the course(s) commence. It should be in Pounds Sterling net of all currency charges. The preferred method is by means of a credit or debit card.

Credit/Debit card paymentCredit/Debit card payment

Please complete the details below.

CREDIT/DEBIT CARD SUMMARY PAYMENT FORM

This form must be completed and returned to LEEA for payment

Please complete all sections of the form

MasterCard Visa Credit Visa Electron

American Express Debit Card

Card number: / / /

Card Expiry (mm/yy): /

Card expiry date: /

Security code (last 3 digits in signature box)

For Maestro and Solo cards, the issue number or start date:

Cardholder’s name (as on the card):

Cardholder’s signature:

Please complete the above application then print, sign & scan the form before forwarding a copy to: [email protected]


Huntingdon Training Centre

leea programme of training courses at huntingdonb... · web viewleea academy training course...

Documents