led solutions retrofitsmylpsolutions.com/mylpsolutions/wp-content/uploads/... · specifications...
TRANSCRIPT
![Page 1: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/1.jpg)
LED SOLUTIONS + RETROFITSMADE IN THE
USA
![Page 2: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/2.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com2
3.030"
.400"
6.060"
6.060"
.375"
.130"
.648"
14W & 23W Tc Point: Inside Lens Cover Below 80˚c13W Tc Point: Inside Lens Cover Below 80˚c
Optional Hardware Includes 4 6-32 X 1/2 Screws & 8 6-32 KEP NutsHARDWARE SOLD SEPERATELY - SEE PAGE 9
OPTIONAL HARDWARE PART # 10-270
POWER OPTIONS @ 80CRI
13W EOS RETROFIT 910lm, 3000K = 70lm/W 1000lm, 4000K = 76lm/W
14W EOS RETROFIT 1350lm, 3000K = 96lm/W 1400lm, 4000K = 100lm/W
23W EOS RETROFIT 1850lm, 3000K = 80lm/W 1900lm, 4000K = 82lm/W
90CRI models special order
3.030"
.400"
6.060"
6.060"
.375"
.130"
.648"
14W & 23W Tc Point: Inside Lens Cover Below 80˚c13W Tc Point: Inside Lens Cover Below 80˚c
Optional Hardware Includes 4 6-32 X 1/2 Screws & 8 6-32 KEP NutsHARDWARE SOLD SEPERATELY - SEE PAGE 9
OPTIONAL HARDWARE PART # 10-270
SL08-AC120R-W-M807PL SL12-AC120R-W-M807PL SL18-AC120R-W-M807PL13W, 910LM, 3000K 14W, 1350LM, 3000K 23W, 1850LM, 3000K
SL08-AC120R-C-M807PL SL12-AC120R-C-M807PL SL18-AC120R-C-M807PL13W, 1000LM, 4000K 14W, 1400LM, 4000K 23W, 1900LM, 4000K
SL08 - AC120R - W - M807PL - MSL08 13W SL12 14W SL18 23W
AC120R INPUT VOLTAGE W 3OOOK C 4OOOK
M807PL HEAT SINK # M MOV SURGE PROTECTION
SL08 - AC120R - W - M807PL - MPART NUMBER GUIDE OPTIONAL
Input Voltage: 120VAC; 50/60Hz
13W, 14W & 23W Models
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Standard mounting options for easy install with optional hardware
Integrated powdercoated aluminum heat sink with ground wire
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL 1598 Classified
FCC compliance Class B
SPECIFICATIONS
Full specifications available on cut sheets
EOS Retrofit Kits available in component form. Contact Lighting Plastics for more information.
UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
EOS LED RETROFIT KITS
install video
RESI 6
![Page 3: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/3.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com 3
8.125"
8.125"
.375"
4.063"
.130"
.400"
.648"
14W & 23W Tc Point: Inside Lens Cover Below 80˚c13W Tc Point: Inside Lens Cover Below 80˚c
Optional Hardware Includes 4 6-32 X 1/2 Screws & 8 6-32 KEP NutsHARDWARE SOLD SEPERATELY - SEE PAGE 9
OPTIONAL HARDWARE PART # 10-270
POWER OPTIONS @ 80CRI
13W EOS RETROFIT 910lm, 3000K = 70lm/W 1000lm, 4000K = 76lm/W
14W EOS RETROFIT 1350lm, 3000K = 96lm/W 1400lm, 4000K = 100lm/W
23W EOS RETROFIT 1850lm, 3000K = 80lm/W 1900lm, 4000K = 82lm/W
90CRI models special order
8.125"
8.125"
.375"
4.063"
.130"
.400"
.648"
14W & 23W Tc Point: Inside Lens Cover Below 80˚c13W Tc Point: Inside Lens Cover Below 80˚c
Optional Hardware Includes 4 6-32 X 1/2 Screws & 8 6-32 KEP NutsHARDWARE SOLD SEPERATELY - SEE PAGE 9
OPTIONAL HARDWARE PART # 10-270
SL08-AC120R-W-M804PL SL12-AC120R-W-M804PL SL18-AC120R-W-M804PL13W, 910LM, 3000K 14W, 1350LM, 3000K 23W, 1850LM, 3000K
SL08-AC120R-C-M804PL SL12-AC120R-C-M804PL SL18-AC120R-C-M804PL13W, 1000LM, 4000K 14W, 1400LM, 4000K 23W, 1900LM, 4000K
PART NUMBER GUIDE
Input Voltage: 120VAC; 50/60Hz
13W, 14W & 23W Models
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Standard mounting options for easy install with optional hardware
Integrated powdercoated aluminum heat sink with ground wire
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL 1598 Classified
FCC compliance Class B
SPECIFICATIONS
Full specifications available on cut sheets
EOS Retrofit Kits available in component form. Contact Lighting Plastics for more information.
OPTIONAL
UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
EOS LED RETROFIT KITS
SL08 - AC120R - W - M804PL - MSL08 13W SL12 14W SL18 23W
AC120R INPUT VOLTAGE W 3OOOK C 4OOOK
M804PL HEAT SINK # M MOV SURGE PROTECTION
SL08 - AC120R - W - M804PL - M
install video
RESI 8
![Page 4: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/4.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com4
DIMENSIONS
.50" Center Mount for use with 1/8” IP nipple
3.5"(89mm)
1.08"(27mm)
TC POINT: INSIDE LENS COVER BELOW 80˚C
OPTIONAL HARDWARE PART # 10-268
Optional Mounting Hardware Includes2 8-32 X 3/8 TYPE F Screws
HARDWARE SOLD SEPERATELY - SEE PAGE 9
POWER OPTIONS @ 80CRI
13W EOS RETROFIT 910lm, 3000K = 70lm/W 1000lm, 4000K = 76lm/W
90CRI models special order
SL08-AC120R-W13W, 910LM, 3000K
SL08-AC120R-C13W, 1000LM, 4000K
SL08 - AC120R - W - MSL08 13W AC120R INPUT VOLTAGE W 3OOOK
C 4OOOKM MOV SURGE PROTECTION
SL08 - AC120R - W - MPART NUMBER GUIDE
Input Voltage: 120VAC; 50/60Hz
13W Models
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Standard mounting options for easy install with optional hardware
Integrated powdercoated aluminum heat sink with ground wire
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL 1598 Classified
FCC compliance Class B
SPECIFICATIONS
Full specifications available on cut sheets
EOS Retrofit Kits available in component form. Contact Lighting Plastics for more information.DIMENSIONS
.50" Center Mount for use with 1/8” IP nipple
3.5"(89mm)
1.08"(27mm)
TC POINT: INSIDE LENS COVER BELOW 80˚C
OPTIONAL HARDWARE PART # 10-268
Optional Mounting Hardware Includes2 8-32 X 3/8 TYPE F Screws
HARDWARE SOLD SEPERATELY - SEE PAGE 9
UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
EOS LED RETROFIT KITS
OPTIONAL
install video
PUCK 3.5
![Page 5: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/5.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com 5
.50" Center Mount for use with 1/8” IP nipple
Key Hole Slots on 2.75" & 3.56"Bolt Circle
Mounting Options
DIMENSIONS
6.18"
(157mm)
1.32"(33mm)
TC POINT: INSIDE LENS COVER BELOW 80˚C
OPTIONAL HARDWARE PART # 10-269
Optional Mounting Hardware Includes2 #6 X 3/8 TYPE AB Screws
HARDWARE SOLD SEPERATELY - SEE PAGE 9
POWER OPTIONS @ 80CRI
14W EOS RETROFIT 1350lm, 3000K = 96lm/W 1400lm, 4000K = 100lm/W
23W EOS RETROFIT 1850lm, 3000K = 80lm/W 1900lm, 4000K = 82lm/W
90CRI models special order
SL12-AC120R-W SL18-AC120R-W14W, 1350LM, 3000K 23W, 1850LM, 3000K
SL12-AC120R-C SL18-AC120R-C14W, 1400LM, 4000K 23W, 1900LM, 4000K
SL12 - AC120R - W - MSL12 14W SL18 23W
AC120R INPUT VOLTAGE W 3OOOK C 4OOOK
M MOV SURGE PROTECTION
SL12 - AC120R - W - MPART NUMBER GUIDE
Input Voltage: 120VAC; 50/60Hz
14W & 23W Models
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Standard mounting options for easy install with optional hardware
Integrated powdercoated aluminum heat sink with ground wire
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL 1598 Classified
FCC compliance Class B
SPECIFICATIONS
Full specifications available on cut sheets
EOS Retrofit Kits available in component form. Contact Lighting Plastics for more information.
.50" Center Mount for use with 1/8” IP nipple
Key Hole Slots on 2.75" & 3.56"Bolt Circle
Mounting Options
DIMENSIONS
6.18"
(157mm)
1.32"(33mm)
TC POINT: INSIDE LENS COVER BELOW 80˚C
OPTIONAL HARDWARE PART # 10-269
Optional Mounting Hardware Includes2 #6 X 3/8 TYPE AB Screws
HARDWARE SOLD SEPERATELY - SEE PAGE 9
OPTIONAL
UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
EOS LED RETROFIT KITS
install video
PUCK 6
![Page 6: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/6.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com6
1/8" Mounting Holes on 2.18 Bolt Circle
OPTIONAL HARDWARE PART # 10-267Includes 4 #6 X 3/8 TYPE AB Screws
HARDWARE SOLD SEPERATELY - SEE PAGE 9
.50" Center Mount for use with 1/8” IP nipple(hand tighten to avoid cracking)
Mounting Options
1598C Retrofit Kits, Heat Sinks, &Supplemental Surge Protection Available.Contact Inter-Global for more information
.33”(8mm)2.63”
(67mm)
TC POINT: INSIDE LENS COVER BELOW 80˚C
POWER OPTIONS @ 80CRI
13W EOS ARRAY 910lm, 3000K = 70lm/W 1000lm, 4000K = 76lm/W
90CRI models special order
L08 13W AC120R INPUT VOLTAGE W 3OOOK C 4OOOK
PART NUMBER GUIDE
Input Voltage: 120VAC; 50/60Hz
13 Watt
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Multiple mounting options for easy install
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL file: E464765 Certified under UL Standard 8750
FCC compliance Class B
SPECIFICATIONS
EOS LED ARRAYS
L08 - AC120R - W
IMPORTANT PRODUCT MUST BE INSTALLED WITH PROPER
HEAT DISSIPATION. SEE UL TERMS OF ACCEPTABILITY
ON PAGE 11 PRIOR TO INSTALLATION.
HEAT SINK NOT INCLUDED
1/8" Mounting Holes on 2.18 Bolt Circle
OPTIONAL HARDWARE PART # 10-267Includes 4 #6 X 3/8 TYPE AB Screws
HARDWARE SOLD SEPERATELY - SEE PAGE 9
.50" Center Mount for use with 1/8” IP nipple(hand tighten to avoid cracking)
Mounting Options
1598C Retrofit Kits, Heat Sinks, &Supplemental Surge Protection Available.Contact Inter-Global for more information
.33”(8mm)2.63”
(67mm)
TC POINT: INSIDE LENS COVER BELOW 80˚C
AC Driver-On-Board Technology Multiple Mounting Options Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
13W ARRAY
![Page 7: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/7.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com 7
1/8" Mounting Holes on 4.46 Bolt Circle
.50" Center Mount for use with 1/8” IP nipple mount(hand tighten to avoid cracking)
Key Hole Slots on 2.75" & 3.56"Bolt CircleMounting Options
.32”(8mm)
5.11”(130mm)
90˚
TC POINT: INSIDE LENS COVER BELOW 80˚C
1598C Retrofit Kits, Heat Sinks, &Supplemental Surge Protection Available.Contact Inter-Global for more information
OPTIONAL HARDWARE PART # 10-266Includes 4 8-32 X 3/8 TYPE AB ScrewsHARDWARE SOLD SEPERATELY - SEE PAGE 9
POWER OPTIONS @ 80CRI
14W EOS ARRAY 1350lm, 3000K = 96lm/W 1400lm, 4000K = 100lm/W
90CRI models special order
L12 14W AC120R INPUT VOLTAGE W 3OOOK C 4OOOK
PART NUMBER GUIDE
Input Voltage: 120VAC; 50/60Hz
14 Watt (15W @ 90CRI)
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Multiple mounting options for easy install
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL file: E464765 Certified under UL Standard 8750
FCC compliance Class B
SPECIFICATIONS
EOS LED ARRAYS
L12 - AC120R - W
IMPORTANT PRODUCT MUST BE INSTALLED WITH PROPER
HEAT DISSIPATION. SEE UL TERMS OF ACCEPTABILITY
ON PAGE 11 PRIOR TO INSTALLATION.
HEAT SINK NOT INCLUDED
1/8" Mounting Holes on 4.46 Bolt Circle
.50" Center Mount for use with 1/8” IP nipple mount(hand tighten to avoid cracking)
Key Hole Slots on 2.75" & 3.56"Bolt CircleMounting Options
.32”(8mm)
5.11”(130mm)
90˚
TC POINT: INSIDE LENS COVER BELOW 80˚C
1598C Retrofit Kits, Heat Sinks, &Supplemental Surge Protection Available.Contact Inter-Global for more information
OPTIONAL HARDWARE PART # 10-266Includes 4 8-32 X 3/8 TYPE AB ScrewsHARDWARE SOLD SEPERATELY - SEE PAGE 9
AC Driver-On-Board Technology Multiple Mounting Options Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
14W ARRAY
![Page 8: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/8.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com8
1/8" Mounting Holes on 4.46 Bolt Circle
.50" Center Mount for use with 1/8” IP nipple mount(hand tighten to avoid cracking)
Key Hole Slots on 2.75" & 3.56"Bolt CircleMounting Options
.32”(8mm)
5.11”(130mm)
90˚
TC POINT: INSIDE LENS COVER BELOW 80˚C
1598C Retrofit Kits, Heat Sinks, &Supplemental Surge Protection Available.Contact Inter-Global for more information
OPTIONAL HARDWARE PART # 10-266Includes 4 8-32 X 3/8 TYPE AB ScrewsHARDWARE SOLD SEPERATELY - SEE PAGE 9
1/8" Mounting Holes on 4.46 Bolt Circle
.50" Center Mount for use with 1/8” IP nipple mount(hand tighten to avoid cracking)
Key Hole Slots on 2.75" & 3.56"Bolt CircleMounting Options
.32”(8mm)
5.11”(130mm)
90˚
TC POINT: INSIDE LENS COVER BELOW 80˚C
1598C Retrofit Kits, Heat Sinks, &Supplemental Surge Protection Available.Contact Inter-Global for more information
OPTIONAL HARDWARE PART # 10-266Includes 4 8-32 X 3/8 TYPE AB ScrewsHARDWARE SOLD SEPERATELY - SEE PAGE 9
POWER OPTIONS @ 80CRI
23W EOS ARRAY 1850lm, 3000K = 80lm/W 1900lm, 4000K = 82lm/W
90CRI models special order
L18 23W AC120R INPUT VOLTAGE W 3OOOK C 4OOOK
PART NUMBER GUIDE
Input Voltage: 120VAC; 50/60Hz
23 Watt (19W @ 90CRI)
Available in 3000K or 4000K
Constant current design
High power factor > 0.98
Estimated 50,000 hrs L70
Max Lens Temp. (Tc): 80˚C (see below for Tc location)
Optical grade polycarbonate lens
Multiple mounting options for easy install
On board line surge protection
Optional MOV ground surge protection
18" 18 AWG Leads
UL file: E464765 Certified under UL Standard 8750
FCC compliance Class B
SPECIFICATIONS
L18 - AC120R - W
EOS LED ARRAYS AC Driver-On-Board Technology Multiple Mounting Options Data Per NVLAP Accredited Laboratory TRIAC Dimmable To 5% (forward & reverse phase)
Energy Star CSD 5 Year Warranty
IMPORTANT PRODUCT MUST BE INSTALLED WITH PROPER
HEAT DISSIPATION. SEE UL TERMS OF ACCEPTABILITY
ON PAGE 11 PRIOR TO INSTALLATION.
HEAT SINK NOT INCLUDED
23W ARRAY
![Page 9: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/9.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com 9
2.19"(56mm)
3.5"(89mm)
.75"(19mm)
.50"
6-32 Tapped Hole
90˚
8
10
16
,45
72,3
1153,92
153,92
39,4
19,7
3,86
3,3
3.3
4,2
0,88
2,5
113,2
8
9.53
3,3
5,16
5,26
5,26
5,16
29,7186,858
39,48
10
16,45
19,7
39,4
19,7
3,86113,2
8
3.3
4,2
113.28
206,37
206,37
9,53
3.3
0,88
2,5
72,3
1
3,3
M807PL M804PL6” FLAT SQUARE 8” FLAT SQUARE
2.19"(56mm)
3.5"(89mm)
.75"(19mm)
.50"
6-32 Tapped Hole
90˚
6.18"(157mm)
1"(25mm)
.50"
6-32 Tapped Hole
Key Hole Slots
on 2.75" & 3.56"
Bolt Circle
90˚
EOS800HS EOS1200HS3.5” DIAMETER PUCK 6” DIAMETER PUCK
Ground Wire Included Available in White
ALUMINUM HEAT SINKS
HARDWARE
EOS1200HSEOS800HSM807PLM804PL
10-26713W ARRAY Mounting Hardware
4 #6 X 3/8 TYPE AB Screws
10-26614/23W ARRAY Mounting Hardware
4 8-32 X 3/8 TYPE AB Screws
10-269PUCK 6 Mounting Hardware2 #6 X 3/8 TYPE AB Screws
10-268PUCK 3.5 Mounting Hardware2 8-32 X 3/8 TYPE F Screws
10-270RESI Mounting Hardware
4 6-32 X 1/2 Screws & 8 6-32 KEP Nuts
ACCESSORIES
![Page 10: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/10.jpg)
Specifications subject to change without notice. Printed in U.S.A. © 2016 Lighting Plastics Solutions
For more information visit www.mylpsolutions.com10
.250.605
.120
1.562
2.975
1.630
.400
.140
6.100
.815
black300V 3ea 18AWG
Radius / ReachSetting
Time OnSetting
Photo eyeDusk to DawnSetting
.250.605
.120
1.562
2.975
1.630
.400
.140
6.100
.815
black300V 3ea 18AWG
Radius / ReachSetting
Time OnSetting
Photo eyeDusk to DawnSetting
MS2B
Input Voltage: 100-277VAC; 50/60Hz
HF System: 5.8GHz CW Radar
2.6W Power Consumption (Static State)
<10mw Transmission Power
Rated Load: 600W @ 100VAC Incandescent 200W @ 277VAC LED 1200W @ 277VAC Incandescent
360˚ Front Detection Angle
160˚ Side Detection Angle
39" to 26′ Adjustable Detection Distance
Timer Reset Adjusts from 8 Seconds to 12 Minutes
Dusk-To-Dawn Sensitivity from 2-2000Lux (2000Lux is OFF)
UL file: E352016
FCC compliance Class B
SPECIFICATIONSCOVERAGE
MICROWAVE SENSOR Adjustable Time, Reach,
& Dusk-To-Dawn Sensitivity Detects Motion Using
Ultra High Frequency Radio Waves Mounting Bracket for Installation Installs Discretely Behind Fixture Lens
MIN.
3’ (1m)
MAX.
20’ (6m)
Installed
inside a wall
mounted
lighting
fixture at a
height of
5’ (1.52m)
18’ (5.5m)
12’ (4m)
6’ (2m)
Installed
inside a
ceiling
mounted
lighting fixture
at a height of
8’ (2.44m)
MAX.
MIN.
18’ (5.5m)
12’ (4m)
6’ (2m)
Ceiling Mount
Wall Mount
NOTE: Coverage pattern will vary based on installation of sensor
and surrounding materials
360˚
MIN.
3’ (1m)
MAX.
20’ (6m)
Installed
inside a wall
mounted
lighting
fixture at a
height of
5’ (1.52m)
18’ (5.5m)
12’ (4m)
6’ (2m)
Installed
inside a
ceiling
mounted
lighting fixture
at a height of
8’ (2.44m)
MAX.
MIN.
18’ (5.5m)
12’ (4m)
6’ (2m)
Ceiling Mount
Wall Mount
NOTE: Coverage pattern will vary based on installation of sensor
and surrounding materials
360˚
NOTE: Coverage pattern will vary based on installation of sensor and surrounding materials.
Supplementary MOV Ground Surge Protector
Use With EOS LED Products in Outdoor Applications
Transient voltage protection: 4.0Kv (32 joules)@140VAC: L-L,L-N,L-G
EOS SURGE PROTECTION
LED-MOV1
ACCESSORIES
![Page 11: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/11.jpg)
APPLICATION/SPECIFICATION NOTES
Back Screw MountFront Screw Mount
Length = 1/4"+ Depth of
Threaded Opening
Self Tapping ScrewFour Required(not supplied)
Self Tapping ScrewLength = 1/4" + Heat Sink Thickness
Four required(not supplied)
(not supplied)
(not supplied)
Eos Board
Thermal PadSupplied with
L12-AC120R & L18-AC120Rnot required for L08-AC120R
Heat Sink
Through HoleHeat Sink
Threaded opening
UL Conditions of Acceptability1. The Eos LED Light Engine may be provided with or without lead wires. In cases where lead wires are not provided, wire leads must be evaluated for proper size, operating temperature, and strain relief in final application. Wire connectors provided with the Eos LED Light Engine are rated to accept maximum 18 AWG wires.
2. The Eos LED Light Engine is provided with a polycarbonate lens that is part of the electrical enclosure. Lens must be secured to the printed circuit board in the final application.
3. Temperature must be considered in the final application. The following temperature ratings must not be exceeded: - Printed Circuit Board – 130˚C - Leads – as marked on the insulation - Polycarbonate Lens (Enclosure) – 80˚C - Connectors – 125˚C NOTE: The Eos LED Light Engine must be properly heatsunk to thermal dissipation material. Do not mount the Eos board to insulating material such as glass, steel, plastic, or wood.
4. The Eos LED Light Engine has been evaluated for use in dry or damp locations only. The suitability of the mounting means in the end product shall be determined in the end use evaluation.
5. All Eos LED Light Engine boards are supplied with built in surge protection that provides Energy Star required transient voltage protection of 2.5Kv as outlined in ANSI/IEEE C62.41.1-2002 and considered sufficient for indoor applications. For outdoor applications where products are at higher risk of surges from lightning it is recommended to use a higher level of surge protection. To accomplish this, a supplementary surge protection device is included (LED-MOV1) which aids to provide the transient voltage protection of 4.0Kv that is recommended for those applications.
Application Notes1. Maximum solder point temperature of LEDs must not exceed 100˚C.2. ENERGY STAR - Product is listed on the Energy Star Certified Component Database (CSD) under LED Light Engines. The CSD supports the Luminaire Manufacturer's qualification of their Energy Star Luminiares by providing certified performance data of the components. This streamlines the Energy Star qualification process for the luminaire when CSD listed productsare used.3. TYPICAL MOUNTING DETAIL:
4. Product must be installed with supplied optical lens to comply with UL requirements. Lens must be hand tightened to avoid cracking.5. FLICKER - All lighting systems produce Flicker. Visibility of flicker is highly arbitrary and depends on the surrounding conditions. Visual perception of flicker is negligible at operating frequencies higher than 100Hz. Operating frequencies less than 65Hz are considered unacceptable. The Eos LED Light Engine has an operating frequency greater than 120Hz.6. Eos boards are static sensitive. They must be handled in a manner to protect them from static discharge.7. If additional technical assistance is needed, please contact Inter-Global at 1-800-325-7364.
LED-MOV1 WIRING DIAGRAMLED-MOV1
ELECTRICSUPPLY BOX
Eos PRODUCTBLACK
WHITE
GREEN GROUND
BLACK
WHITE
GREEN GROUND
Eos PRODUCT WARRANTY
APPLICATION/SPECIFICATION NOTES
Lighting Plastics Solutions warrants that its Eos product shall be free from defects in material and workmanship and will be of the designated kind and quality for a period of 5 years from the date of manufacture.
Lighting Plastics Solutions makes no warranty whatsoever with respect to any Eos product not installed and operated in accordance with the current edition of the National Electrical Code, the standards of safety of Underwriters Laboratories, the standards of the American National Standards Institute and specific instructions provided by Lighting Plastics for installation and operation.
If it appears within the said warranty period that any Lighting Plastics Solutions Eos product does not meet the warranty specified above, the customer must give written notice of their warranty claim and return the Eos product with approved Return Authorization (RGA) Number, at the customer’s expense to Lighting Plastics. Within sixty (60) days of receipt, Lighting Plastics shall at its expense and option correct any defects by either repairing or replacing the defective part(s).
This warranty is not applicable to any product subjected to abnormal stresses, abuse, misuse or damage resulting from acts of god.
Lighting Plastics Solution’s Eos Products are designed to be operated in an ambient temperature range of -40C (-40F) to 40C (1 05F)
The foregoing warranty is exclusive of all other statutory written or oral warranties of any kind given or herein expressed. Lighting Plastics Solutions hereby disclaims any implied statutory warranty or implied warranty of merchantability or fitness for a particular purpose.
Under no circumstances whether as a result of breach of contract, breach of warranty, tort strict liability or otherwise, will Lighting Plastics Solutions or any distributor or sales representative be liable for consequential, incidental, special or exemplary damages, including but not limited to loss of profits, loss of use or damage to any property or equipment, cost of capital, cost of substitutes, products facilities or services, down time cost or claims of Lighting Plastics’s customers.
The Liability of Lighting Plastics Solutions or any distributor or sales representative on all claims of any kind for any loss or damage arising out of, resulting from or concerning any aspect of this limited warranty, from the Eos product furnished, shall not exceed the purchase price of the specific Eos product which gives rise to the claims.
REPAIR OR REPLACEMENT FOR Eos PRODUCT UNDER WARRANTY Step 1 Contact Lighting Plastics within 30 days of discovery to explain the nature of the defect: BY PHONE - 1-800-587-3310 BY FAX - 727-446-2451 BY E-MAIL - [email protected]
Step 2 You may be instructed to send some or all of the units back for evaluation. You will be given a Return Authorization (RGA) Number. This number must appear on all cartons, packaging slips, debit memos and other correspondence.
No merchandise will be accepted without a valid RGA number marking the shipment. The Eos product must be returned freight prepaid-COLLECT SHIPMENTS WILL BE REFUSED.
Step 3 The returned Eos product will be evaluated by Lighting Plastics to determine if it is covered under the Limited Warranty.
Eos PRODUCT UNDER WARRANTY - When all of the following conditions exist, the returned Eos product will be considered under warranty and will be repaired or replaced at the option of Lighting Plastics Solutions. 1. The Eos product was manufactured less than the specific warranty period earlier than the date of return.
2. It is determined by Lighting Plastics Solutions that the Eos product was installed and operated in accordance with the current edition of the National Electrical Code, the standards for safety of Underwriter’s Laboratories, Inc. the standards of the American National Standards Institute and the specific instructions provided by Lighting Plastics for installation and operation.
3. The Eos product does not operate according to Lighting Plastics Solutions specifications, due to defects in material or workmanship.
4. The Eos product manufacturing date code has not been altered or is not missing (DATE CODE - Each Eos product is marked with a date code in the form of a sticker or stamped into the case depending on the type of unit). The first two digits represent the year, and the next two digits represent the month of the year of manufacture.
5. The Eos product was not damaged due to physical abuse and was returned in adequate packaging to prevent damage to it.
6. For outdoor installations, the Eos product must be installed with optional surge supression (LED-MOV1).
Eos PRODUCT NOT UNDER WARRANTY - Any Eos product determined by Lighting Plastics Solutions not to be under warranty will be returned to the customer (freight paid by customer), or destroyed, at the customer’s option.
11
![Page 12: LED SOLUTIONS RETROFITSmylpsolutions.com/mylpsolutions/wp-content/uploads/... · Specifications subject to change without notice. Printed in U.S.A. 2016 Lighting Plastics Solutions](https://reader034.vdocuments.us/reader034/viewer/2022042221/5ec75b74157be373b1749987/html5/thumbnails/12.jpg)