LED DAYTIME RUNNING LIGHTS | 12V & 24V systems

DRL

HARNESS HARNESS

(ground) (ground)

Connect red wire to ignition to power on DRL’s when car ignition is turned on.

Optional wiring methods:Splice to parking lamp wire—DRL’s will power on with parking lampsSplice to fog lamp wire—DRL’s will power on with fog lampsConnect to auxiliary switch—DRL’s will power on with switch

*Ground wire (black) should be mounted to negative terminal on the battery or to chassis.

*Power to white wire will power off the DRL’s. Connect to headlights to make DRL’s power off when headlights turn on.

DRL

(+)

wiring diagram:

MTQ INC. 5620 AYALA AVE, IRWINDALE, CA 91706 • TEL: 626-334-1400 • FAX: 626-513-4381 • WEB: NOKYAUSA.COM

Warning:

Federal and many state laws prohibit the removal, modification or rendering inoperable of any device or element of design affecting vehicle safety in a vehicle used on public highways. Violation of such laws may subject the owner or user to fine or penalty. It is up to the end user to familiarize themselves with the laws concerning the use of this product, and to insure they are legal for their intended use.

contents (may vary depending on model):

1. LED daytime running light unit (x2)2. Wiring Harness (x1)3. Bracket (x2)4. Mounting screws (x4) 5. Washers (x4)

Note:On earlier versions:positive wire — blackground wire — brownpower wire — grey

(white)