led 5ft twin microwave sensor batten light fittings data sheet · title: led 5ft twin microwave...
TRANSCRIPT
3
AINM TEW NO AL NCE
Key specifications:
230V50/60Hz
IP65NON DIMMABLE
1480mm
118m
m
1000mm
1064mm
69.5
mm
118mm
80m
m
Sensor Coverage:
Max:7.5mMax:7.5m
2.4
- 6
m
Height of installation: 2.4 - 6m
Detection Range(installation height 2.4-6m)
Detection Angle
Min:1.5m Min:1.5m
0360
RTWPLED25MW
LED Batten lights are designed for the straight replacement of existing 2 x 5ft fluorescent fittings. They come complete with microwave sensor and
remote control and are suitable for the most demanding environments, such as multi-storey car parks and workshops.
The sensor adjustable presets include time delay, sensitivity and lux. Supplied with terminal blocks for series and master-slave wiring.
With a smooth and even light distribution it provides up to 50% energy saving against T8 fluorescent.
5ft 80W LED Non Corrosive Weatherproof Fitting - IP65
with Microwave Sensor and Remote Control
Dimensions:
• Voltage Range: 220-240V• Nom. Watts: 80W• Lumen Output: 8400lm• Colour Temp.: 5000K• IP Rating: IP65• Warranty: 3 Years• CRI >80• Power Factor >0.9• ABS Base• Stainless Steel Clips• Dimensions: (H)65*(L)1480*(W)118mm
• Not Dimmable• Remote control• Series & Master-Slave wiringSensor Specifications:• Detection Range: 3-15m• Installation Height: 2.4-6m• Time adjustment: 10sec - 60min• Detection Angle: 360°• Maximum Load: LED - 500W Resistive/Tungsten - 1000W• Remote control range: up to 10m• Sensor Override Facility