8/17/2019 Land 3000HP

1/24

8/17/2019 Land 3000HP

2/24

Page 1

MEMBERSHIPS/

CERTIFICATIONS

AMERICAN

PETROLEUM

INSTITUTE

INTERNATIONAL

ASSOCIATION

OF DRILLING

CONTRACTORS

ASSOCIATION OF

ENERGY SERVICE

COMPANIES

AMERICAN

WELDING SOCIETY

AMERICAN SOCIETY

OF MECHANICAL

ENGINEERS 

THE NATIONAL

BOARD OF BOILER

AND PRESSURE

VESSEL INSPECTORS

BHL

BHL INTERNATIONAL, INC.5201 Hopper Rd.

Houston, Texas 77093

Tel. 281-449-5762 * Fax: 281-449-9009

www.bhlinternational.com

Licensed, Certif ied, Registered Under API Spec 4F-0167,

API Spec Q1 -0580, ISO 9001-0829, I SO /TS 29001-TS-0401,ASME BPVC 44,822; and NBBI R-9050

TECHNICAL PRESENTATION

BHL International, Inc. (BHL) is pleased to submit this proposal for a Heavy Duty3000HP Land Drilling Rig. This Drilling Rig is unique in many ways.

The Rig is capable of drilling and moving from one well to the next wells, fullyassembled including 800,000 lbs. of setback. There is no need to disassemblefrom well to well which takes a long time. There is no limit to the number of wellsthat can be drilled without disassembly.

The Rig is suited for simultaneous drilling, production and/or workover operationson a pad location. The Rig is wide open below the drill floor and will clearwellheads extending above ground level. The Rig is able to skid longitudinally onskid rails on each side of the cellar and wellheads.

The Brand New Mast, Substructure and Rig Skidding System are built and name

plate monogrammed in accordance with the latest API Specification 4F, 4th

 Editioneffective August, 2013. All other structures built under other editions (1

st, 2

nd, and

3rd

 Editions) are now obsolete. Structures built under API 4E which may be offeredby others were obsolete in 1985. The latest 4th  Edition has more stringentrequirements for quality, stability, sliding, erection and wind loading combinations.

MUD PUMPS. The three (3) 1600 mud pumps provided are all brand new with newfluid ends and new pulsation dampeners rated to 7500 psi (not 5000 psi).

THE DRAWWORKS is a newly refurbished 3000 HP, National 1625 Electric DrivenUnit with new 7838 auxiliary brake, and all new bearings and clutches.

THE SCR UNIT is brand new with all new wiring and electrical cable distributionsystem for the entire rig. The SCR Unit is designed and engineered to provide themaximum degree of operational efficiency based on the power requirements of therig.

THE (5) GENERATOR SETS  are brand new Caterpillar 3512C, 1476 HP each(7380 HP Total) are fuel efficient and environmentally emissions friendly.

8/17/2019 Land 3000HP

3/24

Page 2

ALL INSTRUMENTATION EQUIPMENT  including Pit Volume Totalizers arebrand new.

MUD PROCESSING EQUIPMENT  are brand new.

AIR HOISTS & BOP HANDLING SYSTEM are brand new.

THE 10,000 PSI BOP TRANSPORT  SKID  enables the transportation of theBOP Stack fully assembled without breaking apart, thus facilitating testing as acomplete assembled unit before drilling starts at well site.

The Drilling Rig is capable of drilling, completion, testing, temporaryabandonment and intervention work in connection with Land Drilling Rigoperations. The maximum well depth is 30,000 ft.

The Drilling Rig and its associated equipment where applicable, comply with

recognized industry standards and relevant specifications of the AmericanPetroleum Institute (API), American Institute of Steel Construction (AISC), American Welding Society D1.1 (AWS D1.1), International Association of DrillingContractors (IADC), ASME Boiler and Pressure Vessel Code and The NationalBoard of Boiler & Pressure Vessel Inspectors.

The Drilling Rig is manufactured, rigged-up, tested, commissioned and packagedat BHL International, Inc. (BHL), Houston, Texas U.S.A. BHL is licensed, certifiedand registered under API Spec 4F-0167, API Spec Q1-0580, ASME BPVC44,822; and NBBI R-9050. BHL is a member of the American Petroleum Institute(API), International Associations of Drilling Contractors (IADC), Association ofEnergy Service Companies (AESC) and American Welding Society (AWS). BHLPersonnel are members of the Society of Petroleum Engineers (SPE), the

 American Association of Drilling Engineers (AADE), American Society ofMechanical Engineers (ASME) and the American Society for Quality (ASQ).BHL's personnel are extensively experienced on drilling rig structures andequipment.

The rig components used are from established and reputable U.S.A. OilfieldEquipment Suppliers including National Oilwell Varco, Forum AOI, Caterpillar,SWACO, Ingersoll Rand, etc. No Chinese equipment are used in this Rig.

The Rig is near completion. Any other rig will take a very long time to constructand deliver.

8/17/2019 Land 3000HP

4/24

Page 3

RIG SPECIFICATIONS

MAST:Height above Drill Floor: 147 Ft.

 API 4F Rated Static Hook Load: 1,500,000 lbs.

Racking Capacity: 30,000 Ft. of 5

1

/2" Ø DrillPipeBase Width: 31 Ft.No. of Lines to T-Block: 14 LinesDrill Line Size: 1 5/8"

Mast will have latest API Certification and API Monogrammednameplate. Mast is brand new.

SUBSTRUCTURE:Drill Floor Height: 34 Ft. (32 ft. w/o Rig Skid Rails)

Casing Load (Rotary) Capacity: 1,500,000 lbs.Setback Load: 800,000 lbs.Combined Simultaneous Capacity;

Casing plus Setback: 2,300,000 lbs.

Substructure has the latest API Certification and APIMonogrammed nameplate. Substructure is brand new.

DRAWWORKS: NATIONAL 1625 UE 3000 HP

ROTARY TABLE: NATIONAL 37 ½"

PUMPS: (3) 1600 HP American Block

SCR UNIT: 5 Gen x 5 SCR Bays

GENERATOR SETS: (5) CATERPILLAR 3512C, 1476 HP ea.

TOP DRIVE: 750 Ton Electric Top Drive (Canrig)

BLOWOUT PREVENTORS: 13 5/8" x 5,000 PSI NOV (N)13 5/8" x 10,000 PSI Hydril Double (R)13 5/8" x 10,000 PSI. Hydril Single (R)13 5/8" x 10,000 PSI Choke and Kill Spool

LIQUID CAPACITIES:

 ACTIVE MUD: 1500 BBLS

RESERVE MUD: 1500 BBLS

DRILL WATER 1000 BBLS

FUEL: 31,000 Gal. at rig site

Please refer to detai led inv entory .

8/17/2019 Land 3000HP

5/24

Page 4

BHL Ref. No. P-6177

MAST AND SUBSTRUCTURE 147ft. x 1,500,000 lbs. HOOK LOAD

API 4F-0167 MONOGRAMMED AND CERTIFIED

DRAWWORKS AT DRILL FLOOR LEVEL, SELF-ELEVATED AND RAISED USINGDRAWWORKS POWER (NO HYDRAULIC CYLINDERS REQUIRED)

A. 1 MAST

Mast Assembly complete with 147’ clear height,1,500,000 lbs. static hook load capacity, strung on 14 lineswith 31’ base, ladders, lighting and crown assembly. 

The crown assembly is to be supplied complete with a maincluster consisting of seven (7) sheaves, a fastline sheaveeach grooved for 1 5/8" wireline and arranged toaccommodate a seven (7) sheave traveling block,handrails, bumper blocks, padeyes for block suspensionline, tugger sheaves and top drive

The racking board is designed for a racking capacity of30,000 of 5

1/2” drill pipe and ten (10) stands of 8” Drill

Collars. The racking board shall be complete with an

adjustable diving board, finger covers for the driller’s sidefingers, 84” handrails, racking board frame and a ladderlanding platform with handrails.

Derrickman assist winch at racking board to facilitate drillcollars and drill pipe pull back.Two (2) tong counterweights complete with buckets, guides,blocks and wirelines are to be included. Padeyes are to bemounted in the mast intermediate section.Two (2) Tugger sheave units grooved for 9/16” diameter wireline.

Escape line,

9

/16” x 1.5 x mast height with padeye andshackle.

The mast contains all the necessary drive pinsand bolts for assembly.

Mast stand.Mast is API 4F monogrammed andcertified to the latest 4

th  Edition.

8/17/2019 Land 3000HP

6/24

Page 5

SELF-ELEVATING SUBSTRUCTURE

The Self-Elevating type Substructure is to be suppliedcomplete as per the following:

The substructure is rated for 1,500,000 lbs. casing loadsimultaneous with a setback of 800,000 lbs. (2,300,000 lbs.total capacity). The drill floor is 32' high from ground level,34 ft. with rig skid rails or vertical extension.

The drawworks self-elevates to drill floor level using its ownpower. The setback elevates to drill floor level operatingposition using drawworks power.

The structure is to be supplied with checkered floor plate,safety handrails with toe-boards.

BOP Trolley beams to extend to the front of the rig  – underthe V-door.

Features:

The Drill floor area is 40’ x 40’

Provision for independent rotary drive

Three (3) sets of stairs from working floor, two (2) to theground and one (1) to the trip tank landing complete withhandrails.

One (1) Mousehole to be included for Range II pipe.

One (1) Rathole to be included for Range II pipe.

BOP stabilizer padeyes.

V door ramp with stairs.

Mast shoes.

Substructure is API 4F monogrammed and certified to thelatest 4th  Edition. 

8/17/2019 Land 3000HP

7/24

Page 6

BHL REF. NO. P-6177

RIG SKIDDING SYSTEM

BHL International, Inc. (BHL) is pleased to submit this proposal for a Drilling RigSkidding System.

The Client would like to use a land drilling rig for a project where existingwellheads extend above ground level. The drilling rig must be able tolongitudinally skid on each side of the cellars and well heads. The substructurewill have to clear wellheads up to 12 ft.

BHL's mast and substructure design have a wide open area underneath the drillfloor with no problem clearing the wellheads as specified. The skidding rails donot interfere with the existing wellheads.

Rig Skidding System:  The rig skidding system is designed to take the fulloperating capacities of the rig during all drilling operations including 1,500,000 lbs.hook load or casing load simultaneous with 800,000 lbs. full setback and allmaximum combination wind loadings stipulated by API 4F. It shall be designed forerection loads, overturning and sliding as prescribed by API 4F.

The rig skidding system is designed to skid the complete mast and substructure,fully assembled, complete with the drawworks, rotary table, top drive, travelingblock, hook, all drill floor equipment and BOP stack. It shall be capable ofskidding with 600,000 lbs. of pipe setback.

The rig shall be secured to the skid rails while drilling.

The substructure will have adequate guides while skidding. The guides will becapable of providing uplift stability in case of sudden wind gusts or other eventsthat may produce overturning while skidding.

The maximum allowable wind velocity while skidding is 35 MPH. Skidding shallstop and substructure clamped to the skid base for higher wind condition.

The drilling rig will skid longitudinally, drawworks side to pipe rack side or viceversa.

BHL SCOPE OF SUPPLY: A. One (1) Rig Skidding System as described in this proposal and the

drawings.The Rig Skidding System is further described as follows:

8/17/2019 Land 3000HP

8/24

Page 7

  The Skid Rail System requires 80 ft. of skid rails to set thesubstructure and elevated pipe rack for drilling operation plus space toset the hydraulic jacks and claw bases. The skid rails are 20 ft. longeach section to allow for convenient "leap frogging" required forskidding. An extra 20 ft. leap frog section is provided to skid the rig

forward or back, making the total length required to be 100 ft.

  Five (5) - 20 ft. leap frog sections on each of Driller's and Off-driller'sside or a total of ten (10) - 20 ft. sections are required.

  All sections are connected with double 100,000 psi high strength pinsfor fixity and continuity. 

  The top of the skid rails are slotted to anchor the jacking claw baseswhile skidding.

  GUIDE BASESGuide Bases are included to guide and align the substructure baseon top of the skid rails. Each of the guide bases include a positiverestraint to prevent uplift and overturning of the structures in the eventof high wind and other events while skidding.

  CLAMPSClamps are provided to clamp and lock down the structures on theskid base when not skidding.

  SKIDDING JACKS

Skidding jacks capable of skidding the rig are included in thisproposal. These jacks are push - pull types capable of pulling orpushing the rig.

  CLAW BASESClaw Bases are provided to anchor the hydraulic jacks to the skid railwhile skidding.

  CONTROL CONSOLE A portable console with its own stand is included for the skiddingoperation. 100 ft. long hoses are provided between the hydraulic

 jacks and the console. The existing Rig Hydraulic unit will be used.

BHL RIG SKIDDING SYSTEM CAPABILITIES:

BHL personnel have designed extensive number of rig skidding systems forland, offshore and arctic rigs including over 40 offshore platform rig skiddingsystems. We worked on rig skidding for Union Platform Gilda (now ChevronTexaco) which has 96 well slots, the most number of wells on a platform.  

8/17/2019 Land 3000HP

9/24

Page 8

BHL Ref. No. P-6177

3000 HP x 1,500,000 lbs. HOOK LOAD OILFIELD DRILLING RIG

DETAILED INVENTORY

CODE: (N) New (R) Refurbished

MAST: (N) Model: 147’ BHL Self-Elevating MastHook Capacity: 1,500,000 lbs.Clear Height: 147 feetRacking Capacity: 30,000 ft. of 5-1/2” ø (Triples) 

Mast will accommodate a 750 Ton Top DriveMast is API 4F-0167 Monogrammed and CertifiedIncludes Caged Ladders

SUBSTRUCTURE: (N)Model: BHL Self-Elevating SubstructureDrill Floor Height: 34 ft.Casing Capacity: 1,500,000 lbs.Setback Capacity: 800,000 lbs.Total Capacity: 2,300,000 lbs.Substructure is API 4F-0167 Monogrammed and Certified

V-DOOR: (N)

CAT WALK: 1 Piece, 18” H x 5’W (N) 

PIPE RACKS: 6 Pipe rack beams, 3 on each side of Catwalk (N)

RIG SKIDDING SYSTEM: 5 Sections. No Limit to Number of Wells (N)(NOT INCLUDED )

TOP DRIVE: 750 Ton Electric Top Drive, Canrig (N)

DRAWWORKS:Model: National 1625, 3000 HPDrive Motors: 3 – 1050 HP Continuous, 1250 HP Intermittent (R) with

w/ 10hp Blowers (N) Auxiliary Brake Model 7838 (N)

8/17/2019 Land 3000HP

10/24

Page 9

Brake Cooling: 50 bbl water tank, (N) w/ 4 x 3 x 13 centrifugal pump and30 hp electric driver (N)

DRILL LINE: (N)Make: Union Wire Rope (or Equal) , 5,000 ft.

Type: 1-⅝” RRL, EIPS, IWRC

DEADLINE ANCHOR: (N)Make: Hercules, 120,000 lbs. capacityHook Load Capacity on 14 lines: 1,680,000 lbs.

DRILL LINE SPOOLER: (N)Type: Electric DriveCapacity: 5000 ft. of 1-⅝” Drill line 

TRAVELING ASSEMBLY: (R)

Block: Model – 750 TonHook: Model – 750 TonElevator Links: 144”, 750 Ton

ROTARY EQUIPMENT:Swivel:

Model – 750 Ton (R)Kelly: Type – Hexagonal (R)Size – 5-¼”, 40 feet 

Kelly Bushing; Pin Drive (R)Kelly Hose – Type: Grade D – API 7K, 10,000 psi; 85 feet long (N)Rotary Table: Type – Model RT375 (R)

Size: 37 ½" SquareRating: 750 tonsDrive: 1 – GE752 /Joliet Traction Motor (R) w/10hp detached

blower (N)Master Bushing: 37 ½” (R) Inserts bowl 1, 2, and 3 (R):

1-Dimension: 13-3/8” & 11-3/4” 2-Dimension: 10-3/4” & 9-5/8”3-Dimension: API 8-5/8” 

MUD SYSTEM:Mud Pumps: (3) American Block 1600 HP (N)Type – Triplex

PSI: 7500 psiDrivers: 2 –Joliet 1050 HP Traction Motors (R) w/10 hp blowers (N)Pulsation Dampeners: 7500 psi (N)

8/17/2019 Land 3000HP

11/24

Page 10

Charging Pumps  – 8 x 6 x 11 Centrifugal w/75 hp electric driver (N)

 Active Tanks: 1500 BBL Total Capacity  – 3 Tanks (N)

Shaker Tank; 500 bbl, Equipped with Roof, (N) w/3  – Swaco Shale Shakers, (N)2  – Circulating Pumps: 6 x 5 x 11 w/60 hp electric drivers (N)1  – Drilco Degasser (N)1  – Desilter, 12-cone (N)1  – Desander, 3 cones (N)2  – Sand Traps (N)4  – Agitators (N)

Suction Tank; 500 bbl, equipped with a roof, (N) w/2  – Pumps, 6 x 5 x 11 w/60 hp electric drivers (N)

3 –

 Mud agitators (N)1  – Hoppers, Low Pressure (N)1  – Hoppers, High Pressure (N)

Intermediate Tank: 500 bbl, equipped with a roof, (N)2  – Agitators (N)

Trip Tank: 75 bbl (N) w/10 bbl strip tank2  – 4 x 3 x 13 centrifugal pump with 30 hp electric driver

Reserve Tanks: 1500 BBL Total Capacity  – 3 Tanks (N)

1 - Reserve Mud Tank #1, 500 bbls, equipped with a roof1 - Reserve Mud Tank #2, 500 bbls, equipped with a roof1 - Reserve Mud Tank #3, 500 bbls, equipped with a roof

GENERATOR UNITS: (N)Engines: 5 Caterpillar 3512C, 1476 HP ea. (N)Generators: 5 Kato 6P6-3300 Synchronous Brushless Revolving

Field Generator rated at 1365 kw for SCR Application,(N)

SCR HOUSE: (N)5 Gen x 5 SCR system (N)600 VAC, 750 VDC 3 phaseInput: 1,600 Amps, 60 hzOutput: 750 VDC, 2,000 AMP ADCClimate controlled, self-contained unit.

8/17/2019 Land 3000HP

12/24

Page 11

AUXILIARY EQUIPMENT & STORAGE

 Air Compressor (N)2 – Curtis 40 Series, Screw Type, 173 CFM, 125 psi

Powered by 40 hp electric drivers Air Receivers (N)

2 – 200 gallon vertical1 – 600 gallon at substructure

 Air Dryer (N)

Cold Start Compressor (N)1 – Lambardini 10 hp Diesel pull start, Model CAERSPKG, R-series1 – 40 Gallon receiver attached, 25.25 ACFM @ 100 psi

Dog House (N)1 – 8 feet x 35 feet driller’s side mounted 

Change & Equipment Storage House (N)

Fuel Tanks [Total 750 BBLs] (N)3 – 250 bbl Tank (N) w/ manhole drip pan2 – RCI Fuel purifier, Dayton GPCV6V-05 pump with

2 hp, 3 ph electric pump motors (N) equipped with a drip pan

Water Tank (N) (1000 bbl total capacity)1 – 500 bbl tank w/2 – 4 x 3 x 13 centrifugal pumps driven by 30 hp electric motors(See Dual Purpose Mud / Water Tank for the other 500 bbls)

INSTRUMENTATION, CONTROL & RECORDING EQUIPMENT (N)Drilling Instrumentation: Driller’s Console, AOI Custom, Single Bay w/ (N) 

Model 100 Weight IndicatorElectric Torque IndicatorRotary RPM indicatorPump Pressure GaugeTong line pull indicatorROP IndicatorPump Stroke Counter

 Automatic Driller

SCR Drive Control: Driller’s Control Console (DCC) (N) 1 – 12-Position Selector Switch,1 – Drilling / Tripping1 – Drawworks speed selection1 – SCR/MP-1/MP-2, Drawworks/Rotary, T.A. Control unit1 – Hydraulic Tong Controls

8/17/2019 Land 3000HP

13/24

Page 12

1 – Emergency Stop (Power System)

Driller Video Monitoring (N)1 - Fixed mounted, fixed zoom lens color camera mounted in the

racking board

1 – Video color monitor designed and equipped to be mounted onthe rig floor

 Analog Drilling Recorder- (N)1 – ARG series 7 pen recorder to record;Hook LoadROPRotary torquePump PressureRotary RPMRig Deviation Tool, 0 – 8 degrees

The 7-pen recorder is being provided for the following reasons: If itis required for each mud pump to be printed out MP strokes perminute and SPM at the same time, 6 pens of eight will be required.BHL will provide a selector switch on the 7-pen recorder that willselect any one mud pump at one time. Data for each MP strokecounter and MP SPM will be collected, but only one can be printedout at one time.

 Advance Drilling Monitoring System (ADMS) includes the following:*5-Individual Mud / Trip Level Indicators*Total Fill Stroke Indicator *Pit Volume Totalizer *Loss / Gain*Percent Return Flow Indicator *Flow In Indicator *Cumulative Flow In Indicator *3-Individual Stroke Per Minute Indicators*3-Individual Fill Stroke Indicators*Total Strokes Indicator *8-Pen Printer *Event Tagging*On Screen Messaging*Audible and Visual Alarms

BOP PREVENTION & WELL CONTROL EQUIPMENT

1 –  Annular Type, 13 5/8” API, 5,000 psi, NOV (N)

1 – Ram Type preventer, 13 5/8” 10,000 psi, Hydril Double (R)

1 – Ram Type preventer, 13 5/8” 10,000 psi, Hydril Single (R)

1 – Ram Set 9 5/8”, 7” ”, 5 ½”, 3-1/2”, & 2-3/8 (N)

1 – Shear Ram (N)

8/17/2019 Land 3000HP

14/24

Page 13

1 – Drill Spool, 10,000 psi with 4-1/16” Choke and 2-1/16”Kill connections (N)

1 – Set Riser and bell nipple (N)

Choke Line Valves (N)

Manufacturer: Cooper-Cameron2 – Handle gate valve 4-

1/16”, type flange

2 – Hydraulic gate valve 4-1/16”, type flange

Kill Line Valves: (N)Manufacturer: Cooper-Cameron2 - Handle gate valve 2-1/16”, type flange2 - Hydraulic gate valve 2-1/16”, type flange

 Accumulator Unit and Control (N)1 – Consolidated Pressure Control 5S-2160-25 Manifold 5036 (or

equal), triplex pump, 3,000 psi24-bottle, 360-gal. reservoir w/ air pump & 25 hp driver1 – Remote Control BOP on Rig Floor1 – Remote control panel with 150’ umbilical run 

Choke Manifold (N)1 – 10,000 psi with adjustable 2-1/16” API1 – Remote control panel on rig floor

Mud Gas Separator1 – BHL MGS 48" x 20' (N)

Hydraulic Cathead: (N)2 – Hydraulic Cylinders with independent controls on driller’s

console

Hydraulic Power Unit: (N)1 – World Wide, 30 gpm, Hartmann PVX464-CKXXX-20FL pump w/

20hp model XWWE20-18-256TC, electric drive

 Air Hoists: (N)2 – Ingersol Rand, Man Riding, for 5/8” line size 

Tugger: (N)1 – Derrickman's Assist Tugger at Racking Board

Kelly Spinner, International, Air drive, reversible (N)

8/17/2019 Land 3000HP

15/24

Page 14

Lift Assist Assembly, including Geronimo Seat and escape slide (N)

Dual Standpipe: (N)5” Rated to 7,500 psi 

Length: 75’ (from drill floor) 

Standpipe Manifold: (N)Stand Pipe Manifold rated to 7,500 psi.

BOP Handling System: (N)1 Set - 50 Ton Capacity BOP Rails and Ingersol Rand (or Equal)Trolley and Hoist.

Headache Rack for Mast (N)

DRILL PIPE: (NOT INCLUDED)  

DRILL FLOOR EQUIPMENT: (NOT INCLUDED)

ELECTRICAL DISTRIBUTION SYSTEM: (N)System includes all new cables, wirings, fittings, junction boxes, lighting,etc. for a complete drilling rig electrical distribution system in accordanceand compliance with API specifications including API 500 Area andHazardous Zone Classifications.

1-Rig Site Stand-By/Emergency Power System to power rigemergency loads and rig offices during rig moves:

1-Stand-By / Emergency Diesel Engine to power rig lighting1-Power Distribution Panel

RIG PROCESS PIPING SYSTEM: (N) All new process piping system including high pressure and low pressuremud systems, drill water, fuel, air, hydraulic, wash downs, drains andother piping required for a complete rig process piping system.

 All high-pressure piping unions will be of the 1502 Hammer Union type.

RIG STRUCTURES AND EQUIPMENT ASSEMBLY AND RIG-UP:The rig shall be assembled as close to actual rig site assembly with allinterconnections including accumulator lines, choke manifold lines, brakecooling system, flow lines from bell nipple to shale shaker. Equipmentshall be laid out as shown on the rig layout drawing.

8/17/2019 Land 3000HP

16/24

Page 15

TESTING:The rig system shall be tested at the rig-up yard. Testing shall bewitnessed by the Client and/or its representative.

DISASSEMBLY AND LOAD OUT: After testing and acceptance, the rig shall be disassembled and cleanedup for shipment. Touch-up painting and minor repairs of damage spotsdue to rig-up and handling shall be performed and then loaded out.Crat ing is by o thers.

DOCUMENTATIONS, MANUALS, WARRANTIES, AND API CERTIFICATIONS:BHL shall provide (3) sets of hard copies of Operations and MaintenanceManuals, Drawing Arrangements and Assemblies of the rig components,Erection Procedures, Warranties, and Certifications. Three (3) sets ofelectronic files will also be provided.

ENGINEERING

PROJECT MANAGEMENT

RIG SITE ACCOMMODATIONS: (NOT INCLUDED)  

FORKLIFTS: (R) (NOT INCLUDED)  

CRANES: (R) (NOT INCLUDED)

MANLIFT: (R) (NOT INCLUDED)  

END OF INVENTORY

8/17/2019 Land 3000HP

17/24

PICTURE OF A SIMILAR RIG WITH THE SAME

DIMENSIONS AND CAPACITY PREVIOUSLY SOLD

TO ANOTHER CLIENT

8/17/2019 Land 3000HP

18/24

1,500,000 lbs. HOOK LOAD MAST AND SUBSTRUCTURE

ASSEMBLED AT BHL'S YARD AS PROPOSED TO THE CLIENT

8/17/2019 Land 3000HP

19/24

 

1,500,000 lbs. HOOK LOAD MAST AND SUBSTRUCTURE

ASSEMBLED AT BHL'S YARD AS PROPOSED TO THE CLIENT

8/17/2019 Land 3000HP

20/24

8/17/2019 Land 3000HP

21/24

8/17/2019 Land 3000HP

22/24

 

8/17/2019 Land 3000HP

23/24

8/17/2019 Land 3000HP

24/24