krypton control and solutions

15
Page 1

Upload: robins-thekkedath

Post on 16-Apr-2017

619 views

Category:

Technology


0 download

TRANSCRIPT

Page 1: KRYPTON CONTROL AND SOLUTIONS

Page 1

Page 2: KRYPTON CONTROL AND SOLUTIONS

Page 2

KRYPTON CONTROL & SOLUTIONS#152, OM BIKSHU BUILDING

GANGAMMA CIRCLE,JALAHALLI (EAST)BANGALORE-560013

PHONE :+91-80 23452833/53,+91-9739468612, +91-9663839040

E-MAIL : [email protected]

Page 3: KRYPTON CONTROL AND SOLUTIONS

Page 3

ABOUT US:-

KRYPTON CONTROL AND SOLUTIONS is the one of the leading manufacture of solar products like Solar Power House (SPH), Solar Street Light, Solarmax (Lantern) and LED lighting solutions, Normal Inverter/UPS, Solar Charge Controller, etc… We bring the innovative ideas and technology for consumer product that adds value to customers through a combination of multiple high-end technologies for complete solutions. In 2010 we are launched with Green Innovation and revolutionary technology, Now in India we are one of the leading inventor, Innovator and implementer of leading-edge technology enabled solutions operating in the core business segments of industry, energy and calibration.Our Vision:- We are a company primarily engaged in providing quality and comprehensive, innovative solutions in energy conservation coupled with technology expertise and applied to create total system solutions in commercial, industrial and home to our customers;Serving the welfare of the community at large through our strategies and actions are in line with our commitment to sustainable development and energy saving built on economic progress, social development and environmental improvement.Our Mission:- We will be ultimate solution provider with a reputation for expertise, quality, cost, and providing sustainable business and services solution in the field of energy, industry and lights.

Page 4: KRYPTON CONTROL AND SOLUTIONS

Page 4

PURE SINE WAVE POWER HOUSE (INVERTER/UPS)Features:

1. Pure Sine Wave Output.2. DSP Technology.3. No humming sound.4. Smart charging.5. Long battery life.6. Compact Design.7. DSP based very robust design which will not fail in any extreme condition.8. 20 KHz operating frequency while inverter and charging.9. Cycle-Cycle current limiting which is an enhanced protection method during short circuit and heavy load condition, Current limiting action will take place instant tripping which will load to more reliability.10. Protections against: Overload, Short circuit, Battery low, in all these condition will be shown in the LCD display.11. LCD Display for indicating various status of the system like Inverter ON ,Mains ON, Charging current, Over load, Battery Low. Input voltage, Battery voltage, UPS/INV mode, Load in percentage etc.13. Delayed inverter cut off for condition like battery low, over load, short circuit etc., and this system will automatically restart from cut off after a few seconds of buzzer beeps. The system will permanent cut off in the error condition Exists after 4 restart.14. Isolated Mains sensing which will ensure no electric shock from the battery /PCB even if the Phase Neutral is reversed.15. Inbuilt SMPS type charging.16. Ideal for mixed load application Available Capacity:500VA, 700VA, 850VA,1KVA @12V

Page 5: KRYPTON CONTROL AND SOLUTIONS

Page 5

DSP PURE SINE WAVE POWER HOUSE (INVERTER)

Features: 1. Pure Sine Wave Output.2. DSP Technology.3. No humming sound.4. Smart charging.5. Long battery life.6. Compact Design.7. DSP based very robust design which will not fail in any extreme condition.8. 20 KHz operating frequency while inverter and charging.9. Cycle-Cycle current limiting which is an enhanced protection method during short circuit and heavy load condition, Current limiting action will take place instant tripping which will load to more reliability.10. Protections against: Overload, Short circuit, Battery low, in all these condition will be shown in the LCD display.11. LCD Display for indicating various status of the system like Inverter ON ,Mains ON, Charging current, Over load, Battery Low. Input voltage, Battery voltage, UPS/INV mode, Load in percentage etc.13. Delayed inverter cut off for condition like battery low, over load, short circuit etc., and this system will automatically restart from cut off after a few seconds of buzzer beeps. The system will permanent cut off in the error condition Exists after 4 restart.14. Isolated Mains sensing which will ensure no electric shock from the battery /PCB even if the Phase Neutral is reversed.15. Inbuilt SMPS type charging.16. Ideal for mixed load application Available Capacity: 1.5KVA, 2KVA, 3KVA, 4KVA, 5KVA @ 24V, 36V & 48V

Page 6: KRYPTON CONTROL AND SOLUTIONS

Page 6

SOLAR POWER HOUSE HYBRID MODEL OVERVIEW:-

Krypton Solar Power House is an electronic power source which stores the energy in batteries connected to it. The Solar Power House is with inner charger and automatic switch. When the power off (Grid power off) it can switch automatically and take use off battery power to run loads connected, when power on (Grid Power On) it also can switch automatically and take use of main power (Grid power). But first charging priority always from solar panel even the false sunrise .If solar power not enough to charging the battery then it will charge with main power (Grid power).

Page 7: KRYPTON CONTROL AND SOLUTIONS

Page 7

SOLAR POWER HOUSE HYBRID MODEL:-Features:1. Pure Sine Wave Out put2. DSP Technology3. LCD Display4. Compact DesignControl switches:1. Inverter/ UPS switcha. Inverter-Low voltage-100V High Voltage-270V ACb. UPS-Low voltage-170V High Voltage -270V AC2. Charger Selection SwitchMains charger OFF –Mains charger will be permanently OFF and Battery will charge only from solarMains/solar-In this mode both charger will work UP TO 13.8V, mains charger will turned OFF @ 13.8V automatically and only solar will work UPTO 14.3V3. Auto/Manual SwitchAuto-This solar Hybrid inverter can provide power to the connected load by utilizing the PV power, Utility (Mains) power and battery power. When PV energy is good it will charge the connected batteries, when battery voltage reaches @14.3V Relay will turn ON and this inverter will convert power to the connected loads from solar and Batteries. When PV and Battery power is not sufficient for connected loads (It means less than 11.5V) this inverter will source from the utility (mains) at the same time. When PV energy is not sufficient and Utility (mains) is failed, The System selects the Battery as source.Manual-This inverter will work when mains failed.Indication & Readings1. Solar-It will glow when solar is connected.2. Charger ON-It will glow when charging starts.3. Relay ON-It will glow when relay is ON. Available Capacity:-500VA, 700VA, 850VA, 1KVA @12V &24V.

Page 8: KRYPTON CONTROL AND SOLUTIONS

Page 8

DSP SOLAR POWER HOUSE HYBRID MODEL:-Features:1. Pure Sine Wave Out put2. DSP Technology3. LCD Display4. Compact DesignControl switches:1. Inverter/ UPS switcha. Inverter-Low voltage-100V High Voltage-270V ACb. UPS-Low voltage-170V High Voltage -270V AC2. Charger Selection SwitchMains charger OFF –Mains charger will be permanently OFF and Battery will charge only from solarMains/solar-In this mode both charger will work UP TO 27.6V, mains charger will turned OFF @ 27.6V automatically and only solar will work UPTO 28.6V.3. Auto/Manual Switch:Auto-This solar Hybrid inverter can provide power to the connected load by utilizing the PV power, Utility (Mains) power and battery power. When PV energy is good it will charge the connected batteries, when battery voltage reaches @28.6V Relay will turn ON and this inverter will convert power to the connected loads from solar and Batteries. When PV and Battery power is not sufficient for connected loads (It means less than 23V) this inverter will source from the utility (mains) at the same time . When PV energy is not sufficient and Utility (mains) is failed, The System selects the Battery as source.Manual-This inverter will work when mains failed.Indication & Readings:1. Solar-It will glow when solar is connected 2. Charger ON-It will glow when charging starts.3. Relay ON-It will glow when relay is ON.Available Capacity: 1.5KVA, 2KVA, 3KVA, 4KVA, 5KVA @ 24V, 36V & 48V

Page 9: KRYPTON CONTROL AND SOLUTIONS

Page 9

SOLAR POWER HOUSE WITH MPPT OVERVIEW:-

KRYPTON Solar Power House unit with MPPT (SPH) is an integrated system consisting of a solar charge controller, inverter and a Grid charger. It provides the facility to charger the battery bank either through Solar or Grid. The SPH continuously monitors the state of Battery Voltage, Solar Power output and the loads. Due to sustained usage of power, when the Battery voltage falls below a preset level, the SPH will automatically transfer the load to the Grid power and also charge. Once the Batteries are charged to the pre-set level, the SPH cuts off the Grid Power from the system and will restore to feeding the loads from the battery bank & also restore to charging the battery from the Available Solar power. The SPH always gives preference to the Solar Power and will use Grid power only when the Solar Power/ Battery is insufficient to meet the load requirement.

Page 10: KRYPTON CONTROL AND SOLUTIONS

Page 10

SOLAR POWER HOUSE WITH MPPT UNIT:-• KRYPTON Solar Power House with

MPPT (SPH) is an integrated system consisting of a solar charge controller, inverter and a Grid charger. It provides the facility to charger the battery bank either through Solar or Grid. The PCU continuously monitors the state of Battery Voltage, Solar Power output and the loads. Due to sustained usage of power, when the Battery voltage falls below a preset level, the PCU will automatically transfer the load to the Grid power and also charge. Once the Batteries are charged to the pre-set level, the PCU cuts off the Grid Power from the system and will restore to feeding the loads from the battery bank & also restore to charging the battery from the Available Solar power. The PCU always gives preference to the Solar Power and will use Grid power only when the Solar Power/ Battery is insufficient to meet the load requirement.

Page 11: KRYPTON CONTROL AND SOLUTIONS

Page 11

Features:1. Pure Sine Wave Out put2. DSP Technology3. LCD Display4. Compact DesignControl switches:-Inverter/ UPS switchesa) Inverter-Low voltage-100V High Voltage-270V AC.b) UPS-Low voltage-170V High Voltage -270V AC. 2. Charger Selection Switch Mains charger OFF –Mains charger will be permanently OFF and Battery will charge only from solar Mains/solar-In this mode both charger will work UP TO 27.6V, mains charger will turned OFF @ 27.6Vautomatically and only solar will work UPTO 28.6V.3. 3.Auto/Manual Switch Auto-This solar Hybrid inverter can provide power to the connected load by utilizing the PV power, Utility (Mains) power and battery power. When PV energy is good it will charge the connected batteries, when battery voltage reaches @28.6V Relay will turn ON and this inverter will convert power to the connected loads from solar and Batteries. When PV and Battery power is not sufficient for connected loads (It means less than 23V) this inverter will source from the utility (mains) at the same time. When PVenergy is not sufficient and Utility (mains) is failed, The System selects the Battery as source. Manual-This inverter will work when mains failed. Indication & Readings1. Solar-It will glow when solar is connected.2. Charger ON-It will glow when charging starts.3. Relay ON-It will glow when relay is ON. Available Capacity:-1.5KVA, 2KVA, 3KVA, 4KVA, 5KVA up to 10 KVA @ 24V, 36V, 48V & 240 V

Page 12: KRYPTON CONTROL AND SOLUTIONS

Page 12

KRYPTON STREET LIGHT:- Led street lighting is considered the best option for outdoor lighting.Compared to ordinary lights, these street lights have a number of advantages. With the advance in technological features, lighting systems have undergone a tremendous change. Today majority of the cities have street lights which contain led bulbs. These lights have the advantage of being environment friendly in addition to many other benefits.An LED street light is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts (except LED Gine-based luminaires). New in manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.

Page 13: KRYPTON CONTROL AND SOLUTIONS

Page 13

Reasons to Install LED Street Light:- Today most of the metropolitan cities have LED Street light to brighten the roads and lanes. One of the major reasons for installing these lights includes its cost effectiveness. It is relatively cheaper compared to the ordinary lights. Street lights need to be lit for a longer period of time and the use of these lights are probably the best option to meet rising electricity bills. There are many advantages of installing these street lights and some of the most important among them include the following: 1) Environment friendly: the LED Street light is environment friendly as it does not emit any sort of poisonous gas while being lit. The bulbs do not contain mercury or harmful chemicals. As it does not contain any harmful chemicals it can be easily disposed causing no harm to the environment or soil. 2) LED Street light switches on immediately: unlike the fluorescent lamps which take time to heat up once they are switched on, these lights switch on immediately and light up the entire area within seconds.  3) Efficient and more durable: these lights are more long lasting compared to the ordinary lights.  4) Directional light: The lights emitted from the street light containing LED bulbs are much more directional and uniform. The lights also contain huge amount of brightness unlike the ordinary lights.  5) Better night vision: installation of the LED Street light has paved way for better and improved vision at night.  6) Emits bright light: these street lights are known to emit bright lights compared to the ordinary bulbs. It has the capacity to emit bright light and thereby lights up a wide area of roads and parking lots.  7) Requires less maintenance: due to its increased life span, it seldom requires any sort of maintenance or repairs.

Page 14: KRYPTON CONTROL AND SOLUTIONS

Page 14

KRYPTON SOLAR MAX (LANTERN):-Salient Features:- •4-8 hours of light per day.•Hybrid charging option.•No recurring cost.•High Bright Seoul LED’s, life- 50,000 hrs.•30-50% more efficient than CFL.•Sturdy design, suitable for both urban & rural households.•Constant Brightness.•Light in all directions. Specifications:-  •Solar Panel :- 2 W/ 6 V•Battery :- Luminous Solar sealed 4.5 AH / 6 V•Charging Indication:- Green•Battery low indication:- Red•Usage Duration: - Up to 8 hrs. On full charge.•Weight of Solarmax :- 2 Kg•Body: - Plastic.

Page 15: KRYPTON CONTROL AND SOLUTIONS

Page 15

VISIT US

www.kryptoncontrolsolutions.com